Perfect exactly what I was looking for.

Thanks

Login failed for user 'aspgallery'.

Okay, shouldn't this be trying to use aspgalleryuser?

Lance

Banners no longer show up on my site ?

If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.

The web server must have crashed or lost power and now the application variables are in limbo/not working.

I have seen this happen 3 times. Twice on my own server when the power went out for 2 hours and once on a customers server.

Basically the application variable system gets all messed up because it was not shut down properlly.

The ways to possibly cure it are as follows.

Edit and save a banner in the system. Hopefully that gets things going again.
If not... keep reading for the more drastic cures..


Go to the command prompt on the server and type "iisreset"
Sometimes that is enough.

Reboot the server.
Sometimes that is enough.

Stop the web in the IIS console.
Sometimes that is enough.

Stop the individual processes for each web in iis
"you must really know what you doing and be very careful about doing this"

Remove and recreate new applications in IIS for the web in question.


And sometimes it just takes a combination of the things listed above and a few reboots. I don't know the best way to cure it but I do know why it happens and the steps listed above can get things back on track.

Again, this is because the server lost power or crashed as far as I know.
It was not allowed to shut down properly which sometimes happens.

You'll know things are ok again when you see your banners show up on your site.

There is no way I'm going to spend hundreds of dollars for a thumbnail creation program. Mine is a family web site and all out of my pocket.

Is there any free products that work with Gallery that will create the thumbnails? If not can I create them on my own and link them to the pics? There are tons of Perl based freebies out there.

Steve

I wonder what that ENDSQLMail send failure is all about ?
I dont use anything regarding SQLMAIL in the ASPProtect code.

I think I might need to go in so I can debug a bit. Everything seems to work fine with a SQL installation here so I just don't know at the moment.

If that is ok with you I would need ftp access or something so I can trry a few things and hopefully figure it out. Admin access to the aspprotect admin area as well so I can see what you have set up in there.

PM me with that info if you want me to take a look.

That’s about all I can tell you. It's just not something I support.

Hi Chris,

I tried changing using Notepad in the config_inc.asp

from:

If  Application("SERVER_SOFTWARE") = "" Then
 Application("SERVER_SOFTWARE") = Request.ServerVariables("SERVER_SOFTWARE")
End If

To

Application("SERVER_SOFTWARE") = "iis/6"

and the albums still do not show up under the categories

Rhona (rookie)

Could be a mod I guess - it would be nice to have an option on the admin settings page to lock down access of all pages and redirect to a specified  "lockdown" page upon attempted login.

If I'm updating the large files on the server and someone attempts a download, they'll get a partial ZIP file or an error.

Can we get access to the source project files for ASPProtect.net since we'd like to put in some of our own branding on the pages and not everything can be done in HTML.

Thanks

ok, that probably means the physical path you have set for the logfile directory (in the admin settings area) is not correc t

the error pretty much means just what it says

Not sure because of the nature of the javascript method

for starters tighten up the html around the banner call

change

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<!------- ASPBanner Ad code ------------->
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >

</td>

to

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >
</td>

If that doesn't help I would suggest using the ASP 3.0 version of ASPBanner. It can serve banners to a any type of page extension and it runs just as well as the .NET version. There is a new iframe method for calling banners that you can try instead of the javascript. The iframe method is explained in the ASPBanner Unlimited section of the forum.

I am getting the same error looking at the previous post, I looked in settings and my Registration-URL is pointing at the correct location.

Is there any other thoughts on this issue

Thank you!

Matt2112

ACCESS DENIED

INVALID Username & Password

Username HAS EXPIRED

Suprising I started this tread off on ASPImage, but I resolved my issue and forgot to change the thread topic.  I will try your suggestion.

Now, we can connect to the MySQL database with ASPBanner using the following connection string if we like.

"driver={MySQL ODBC 3.51 Driver};server=localhost;port=3306;uid=root;pwd=temp;databas e=aspbanner;option=16386"

But we really do not want to connect to the aspbanner MySQL database using the "root" account

So, lets make an account to use..

In MySQL Administrator select "User Administration"

Down below you will see the user "root"

Right click on "root" and select "Add new user"



Type in a New MySQL Username and Password

I am going to call my new user "aspbanneruser"

Hit the Schema Privileges" tab



In this case since I am using the root account to manage my MySQL system I am just going to give this new user account what it needs to use the aspbanner database.. you may want to apply more permissions to the new account, that is up to you.. I am giving the new user (select, insert, update, delete, execute) So I right click on the aspbanner and then bring over the permissions I need for it.. and hit apply changes down in the bottom right.

We can now connect to the aspbanner MySQL database using this new account like so.

"driver={MySQL ODBC 3.51 Driver};server=localhost;port=3306;uid=aspbanneruser;pwd=tem p;databas e=aspbanner;option=16386"

------------------------------------------------------------ -----
article still in the process of being written (3/14/06)

No rush, I have it out on the internet, but have not gone live with the site yet.

Thanks for responding,

Enjoy your well deserved break

Hi

ASPBanner is great...

I have a little problem I have a ASP site http://www.bythebeach.com.au/

I understand how Zones (location on a pages) works but i need only to display those banners that pertain only to that catorgries or sub catorgries.

How would i do that would ....  Would i have to add a new field in the database...?

Any help would be greatly apprecaited

regards

Domenic

Sydney, Australia

Yes, that was it! I had not created the banner for that zone yet. Once I did it came up fine. Do I win the Bonehead of the Year award?

I am just implementing the product, and I deleted the included zones instead of renaming them. That is why it is up to 6. I am migrating banners from my current system before I implement the code onto my pages.

If I may, I'd like to ask another question. I use rotation on all pages of my site except for the home page, where the banners are all smaller and static - an advertiser can expect their banner to always be in the same spot on the page.

I am currently hard coding this via html, but then I do not have the ability to collect stats on home page banner clicks, so I want to use ASPBanner. My question is, can I do this without creating a seperate zone for each banner? In other words, is there a way to modify the html code (that works just fine) so that in addition to indicating the zone, it can indicate the specific banner I want to appear? I would then paste the code in each cell of the table, and alter the banner #. If I do this with just the zone, I expect that the page will randomize the position of each banner across the page. You can see what I'm talking about by clicking here: http://www.PoconoCommuter.com/

Thanks for your help!

Is there a way to protect other virtual sites on the server that are not under the default web site considering people may have different websites running off one server?  I get the following error:

Parser Error Message: Cannot use a leading .. to exit above the top directory.

Source Error:

Line 1: <%@ Register TagPrefix="aspprotect" TagName="checkaccess" Src="../../protectpage.ascx" %> Line 2: <aspprotect:checkaccess level="4" groups="null" runat="server"></aspprotect:checkaccess> Line 3:

Thanks!

I would highly suggest setting up a DSN-LESS connection.

That system dsn is most likely the source of your trouble It is probably that or permissions are still not correct.

I can't tell you how many people have had trouble with system dsn's and finally set up a dsn-less connection and everything then worked as it should.

The location of your database is fine as long as permissions are truly set correctly like I mentioned.

Also, be sure you are setting the database type correctly in the dataconn_inc.asp file. That can cause problems as well as some people have been known to delete that line.

See my articles...

http://support.cjwsoft.com/code/moreinfo9-1.htm

http://support.cjwsoft.com/code/moreinfo136-1.htm

http://support.cjwsoft.com/code/code_info.asp?TID=40&KW= system+dsn

Hello,

My guess your having trouble setting up a system dsn because the database has a password set on it. Your hosting company most likely sets up DSNs without using the advanced tab which is where the authentication information goes. Or they have some sort of web interface for the customers to use that doesn’t allow setting up that information.System DSN’s are actually difficult to set up correctly when the database has a password on it. There is of course a password on the database for security reasons so if someone ever downloads it somehow they will not get your information.

System DSN’s are not the way to go regardless as you will see mentioned at our support site.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=9&P N=1

You really should try setting up a DSN-less connection. It is the best way to go. They are easier to set up, perform better, and are less load on the server. Any host that wants it customers to use system dsn’s is not on the ball as far as server performance and server resource conservation goes. They are really asking for trouble down the road.

All you need to do to make dsn-less connection is the following.

Get permissions set for the folder the database is in (by your host)… then figure out the physical path on the server to the database by using server.mappath or you simply ask your host for the info.

An article I wrote on using server.mappath

http://www.powerasp.com/content/hintstips/physical-path.asp

Then your connection string will look something like this.. (of course you edit the path to match what server.mappath tells you. And you make sure the database name is correct)

ListingsConnectionString = "DBQ=C:\Inetpub\wwwroot\asplistings\_database\asplistings_ac cess2000.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

Another option would be to simply remove the password from the database using MSACCESS.. then try to connect to it using a System DSN without the password. If your host is storing the databases outside of your web in the root of the server then removing the password on the database is not that bad of a thing to do as there is no way anyone will be able to dload it from your site. Of course there is a still a performace loss when using a system dsn with an Access Database

The Double DIM needs to be removed for this code to work properly.

<%
Dim BannerZone, BannerConnectionString, BannerDatabaseType, ConnBannerSystem
Dim CmdCheckUser, CmdGetConfiguration, App_Name, Config_SQL, BodyTag, BanDataConn
Dim CmdBannerTemp, CmdGetZones, ZoneString, ZoneArray, ZoneIndex, CmdUpdateWaiting
Dim CmdUpdateExpired, CmdRetrieveImpLimitedAds, CmdRetrieveImpressions
Dim CmdUpdateImpHit, CmdRetrieveAds, CycleBannerTotal, CycleList, NewCycleList
Dim Dim LoopBanner, CycleLoop, CycleListArray, CycleListArrayIndex, BannerCycleData
Dim Banner_Array, CurrentBanner, NewCycleListArray, Banner_Array2, LocationIndex
Dim Stop_Processing, Keep_Processing, CmdUpdateStats
%>

again I will ask you what is the real error??

see the link above when I asked you the 1st time.
(I need the error details and line number.. etc etc)

and what kind of a server are you trying to run it on ?
you mention xp pro but in a confusing way ?

If you re-start the web via IIS, reboot the server, or (possibly) just add and remove a category... that will clear up.

ASPClassifieds and ASPListings must be installed in seperate IIS applications if they are the same web. Otherwise the category caching system of each system will interfere with each other. They were never intended to be installed in the same web together since ASPListings is merely a stripped down version of ASPClassifieds and they share a lot of the same code. Like I said though if different IIS applications are set up in the web site you can do it because each IIS application will have it's own set of application and session variables.