Ok time for some more questions!!!

Is there a way to make the person's email address their default username... or force it in somehow instead of allowing them to create their own?

actually  I just went to it again and it was somewhat slow coming up this time..

perhaps you have some issues with the sql database.

it should be instant.. like this one I run on my server
http://banserver.powerasp.com/aspbanner/

I suppose it could also have something to do with sql server resources but its hard to say..

I would look on the pictures folder on the server and see what is there for pictures. Also, when you see a broken X on the site right click and see where it is trying to get the picture from and what the pictures name should be.

I would also be sure to clear out your temporary internet files in IE. clost and restart all browsers..

maybe show me the site ? so I can see this happening ?

I am still a little confused... one thing I would like to mention is that the passwords in the aspprotect database are encrypted... meaning you cant just add a password to the user database by hand because it wont be the encrypted value and wont work.

It is something the application takes care of when you add a user via the web based interface.

You can however still add users manaully or with careful import/exporting... but you will have to use the existing password conversion technique which is covered at the end of our upgrade instructions in these forums.
http://support.cjwsoft.com/code/moreinfo174-1.htm

Basically you want to add a field to the "ASPP_Users" table called "Old_Password" and that is where you enter the password in plain text. Then after you are finished adding users to the database manually you do this.

You want to run a special page via the browser.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

Which will convert the passwords to the encrypted value for you.
See the bottom of this thread for all the info on that.
http://support.cjwsoft.com/code/moreinfo174-1.htm

that really does not make any sense...

I dont know what else to tell you as this really shouldn't be anything too difficult to sort out...

redirection based on criteria is not something aspprotect does by default... I try to help a bit... I've shown everyone how to do it in this thread...I know plenty of people doing it... I've done it myself... I know it works

let me ask you this... are you using ASPProtect 6 with the Option Pack ?
I assume you must be or you would not have the Groups feature ?
And you asked this question in the ASPProtect 6 section.

but then maybe your using 7.. I do not know

this should all work the same either way

Christopher

Many Thanks

Seems like its working just got to test it bit to see, though it wasnt going to work as I had one too many End If's after the last part of the code you done for me. But even I eventually sussed it, nothing to do with your bit just another mistake on my part

Great to get support like this especially on a Saturday

regards

John

I am using cdont to send email. what do i have to do send email to other display my full name instead  of email address. In other word I want to see first name last name  in their email client instead of email address.

thanks for your help

Hi Chris,

The password is HANNAH.  If you're into trouble shooting mode and would like the key, I can send it to you.  If not, no big deal, I've email the guy a new password.  We'll see how many rounds it takes him to get it right. 

Thanks,
Mick

Below is the email I received when testing the self-registration. Does anyone know what setting I configured incorrectly?

I received the email to confirm the registration but the link to activate is invalied.

Thanks!

Your registration still has to be validated.
Go to
?u=bubbaj&v=4579
to verify your registration.

lets get back to using the forum and not the pm's  please only use the PM's for sensative information. its too hard for me to keep track of all of this as well as help everything else when I got an inbox full of pm's

Ok, so you say no paypal subscription info is being put in the database at all.

I know we have a bunch of people using the paypal subscription code with no issues so I know it works but obviously you got something wrong.

It could be a few things.

Did you enable IPN in the paypal system and put in a postback url like my directions say ?

Are you sure you are not getting paypal single payments and paypal subscriptions mixed up ?

Are the paypal links you made for paypal subscriptions in the correct format like are directions state ? That is critical and another example of something important that you have not shown me.

Did you populate all settings correctly for our paypal subscription code ?
This includes a correct and valid postback url because if that is not right paypal cant communicate with the aspprotect system and no info will get posted back from them at all.

You say your upgrade went well but if you did all all field names perfectly there could be issues with that.

There is just way too much for me to figure out under free support with the info you keep providing me.

I dont think we are going to get anywhere unless I go into your system and spend a considerable amount of time checking everything out. That is not something I do under normal support so if you are interested it is going to involve a fee paid via paypal. It's probably going to take me a while to check everything out and I need you to be 100% sure IPM is enabled in your PayPal account. If you are not sure how to turn it on search their help system as they have plenty of documentation on the process.

Hello,

Unfortuantely I can not help you much regarding the javascript because I am a server side code kinda guy. Client side javascript just isn't my thing. That was free javascript code that I used for that function. I really do not know enough about editing client javascript. Sounds like you might though.

Style 1 is really a relic left over from the standard version. I just left it in in case someone wanted to use it. Like I said because it is javascript making it do more than it does is tricky (at least for me)

Now,, for actually getting description code. The thing to do is check out how that all works in the pic_window.asp file which is what style 2 two uses. Bascially descriptions for an particular album get stored in one text file. We read that test file. Put the lines into an array. Then display the info which gets run through a functions to convert some special characters used when saving back to normal.

I tried to look at your site but it woulnt load for some reason.

If you can would you do it for a price as a mod or will this be added to the new version.

no, you cannot unless you plan to write a lot of custom code.

That is why the option pack has groups which eliminate the need to use access levels because groups can do everything access levels can and more.

There is an article here regarding that.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=32& PN=1

Your SQL statement to the database is the key.

You want to change the sortby hyperlink on that page so that it will in turn change the dynamic sql statement to sort the way you want

Find

?SORTBY=Date_Created

change it to

?SORTBY=Date_Created+ASC

or maybe

?SORTBY=Date_Created+DESC

One of them is the default anyway, but I cant remember which is which off hand so just try them both till you get the desired result

near the top you can also change the default sortby when thet page is loaded

SORTBY = Request("SORTBY")
If SORTBY = "" Then
 SORTBY = "Name"
End If

there you would use a space though.. not a "+" sign when adding the ASC or DESC

The + sign is only used in the hyperlinks because it means a space for browsers that can't deal with spaces in links

ya,

any variation of a site url is going to have its own set of application and session variables.. soy you have to be consistant with your navigation links

example (for anyone that comes across this thread)

http://www.examplesite.com/somepage.asp

is going to have a different set of application and session variables then

http://examplesite.com/somepage.asp

even though they are basically the same page

Same here.  Thinking it might be server load or the bandwidth to the server.

Thanks for checking!
Lance

Hi

I would like to ensure the the user uses a UK style postcode not a clue how to ensure this as I am new to asp. Any ideas?

regards

John

Redirecting is not something ASPProtect does because you can
do that sort of thing using simple ASP redirects.

In all of these examples you are going to want to protect the pages you send these users to accordingly.
So that if they know the url they just cant go their directly without loging in.

Redirecting example..
This page will redirect admins or level 4 users to a certain page  and anyone else to
another page.
 
 
<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
 
<%
If Session("Admin") = "True" or Session("Access_Level") = "4"  Then
    Response.Redirect("sompage.asp")
Else
    Response.Redirect("someotherpage.asp")
End If
%>

Redirecting example..
This page will redirect level 1 users to a certain page. level 2 users to certain page, and anyone else to
another page.
 
 
<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
 
<%
If Session("Access_Level") = "1"  Then
    Response.Redirect("level1.asp")
ElseIf Session("Access_Level") = "2" Then
    Response.Redirect("level2.asp")
Else
    Response.Redirect("allothers.asp")
End If
%>

Redirecting example..
This page will redirect user "PistolPete" to a certain page.

 
<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
 
<%
If Session("Username") = "PistolPete" Then
    Response.Redirect("somedirectory/somepage.asp")
End If
%>

 
then just make sure the page you send the user to to also checks to see if the user is the right user.... to make sure others users can't access each others pages
 
<%
If Session("Username") <> "PistolPete" Then
    Response.Write("You do not have access to this page.")
    Response.End
End If
%>

etc etc etc.... these code snippets should point you in the right direction...

This is great FREE SQL Server Web Data Administrator App from Microsoft..

http://www.microsoft.com/downloads/details.aspx?FamilyID=C03 9A798-C57A-419E-ACBC-2A332CB7F959&displaylang=en

It is an ASP.NET web application that you install locally on your development server and then use to connect to a SQL database whether remote or local.

It can do nearly everything enterprise manager can do.

I have tested it and it works great for me.

Got it working.    Had purchased a long time ago and forgot about needing to run the userreg.exe.  All is well and thanks for the follow up.

Lance

Thanks very much for the tip. I'm a beginner with all this stuff so forgive me for the inate stupidity!

By the way, I think the system is great and I am very pleased my purchase.

It happens at least once per hour or every time a banner is edited in the system by the admin.

Changing its frequency would be somewhat complicated. You'll have to make changes to the code in a few places and you will effect performance adversely by doing it more often as it will mean a lot more database queries which defeats the purpose of doing it once per hour to conserve resources. The reason is when you change the frequency of that you also change the frequency of the entire banner application variable caching system. It difficult to explain but it unlike most banner systems out there it basically fetches banner rotation info every so often instead of every single time your page needs a banner. It stores this rotation and cycling information in ultra fast application variables. The docs actually go over a little bit of how that process actually functions under "using the system / Setting Up Banners
"

Its a customization I just can not support and I do not recommend doing, but if you really want to you should look at the "aspbanner_inc.asp" file

this is the part that makes it happen at least once per hour (requires visitors to your site to happen obviously)... you'd have to cleverly recode it to work slightly more often

' Checks the time the banner data was last updated and basically updates it if an hour or more has passed
If Cint(Application("BannersLastUpdated")) <> Cint(Hour(time)) Then
%>
<!--#INCLUDE FILE="appinfo_inc.asp"-->
<%
End If

There may be more to changing this than that, but this is all I can tell you.

Christopher,

Thank you again Sir. Your quick responses and helpful demeanor add greatly to the value of your software.

I have written asp.net application pages- obviously i knew what viewstate was, or else when they made a mistake on that page it would not have saved their filled in info. Same thing for after they submitted, when they hit the back button their info would be gone.

For someone who wrote this software it seems you are not able to do simple things. Im begining to think you didn't write it. The only reason no one else asked this many questions is possibly because they didnt NEED the functions i am TRYING to do.

I know how the log boxes work. Esp. reg ASP... they all allow you to enter your username and password and then when you hit submit it gets verified and transfers you to your destination. ASP.NET has that capability also.. i didn't purchase a program to go and have to re-write it in visual studio. It would take me longer to re-write YOUR code than it would to have LEARNED ASP.NET and made MY OWN.

The program seems to have some great complex features, however, your not able to incorporate this easy login from a diff. page function... fishy

The links to view that info are on the main users screen of the admin area.

Down below...

They wont show up unless you have that stuff enabled in the settings screen as well.

Thanks for the info.  We'll do as you suggest.

NPA

I am having problems accessing the admin site at the following URL:

http://www.drsweisberg.com/password_admin/default.asp

It brings up the login page, but when I enter the admin/test, it times out.  The DB is the copy with no password and it resides in a directory on the same server hosting the site but it is not in a folder viewable by web users.  This is how the dataconn_inc.asp is set:

<%
'*** Below are the only two settings you need to edit in this file
 
ConnectionString = "DSN=drweisberg;Driver={Microsoft Access Driver (*.mdb)}"
DatabaseType = "MSACCESS"
%>

The ODBC is setup and the IUSR has read/write/modify permissions.

Any help would be greatly appreciated.

I installed the ASPProtect.NET project no problem.  I am using VS.NET 2003 on Windows XP SP2 (and fully patched).  I am able to build the project successfully, however I cannot debug the project.  I get an error "Unable to start debugging on the web server. The project is not configured to be debugged."  The web app runs fine just browsing to it.

I know this is an isolated problem particular to this project.  I have MANY other .NET projects that I can debug without any problems.  I have tried going into IIS and turn on the debugging for server-side script debugging and making sure my IIS application setting were configured correctly.

Can anyone shed any light on this at all?  Christopher, is there any reason I should not be able to debug this?  (i.e. the aspprotectlicense.dll)

Thanks,

K