Hello,

I think you’ll definitely like aspbanner. It's very easy to setup and use and it should work great with your portal. 

You’ll have banners rotating in no time. All you have to do is add banner calling code in your pages where you want the banners to show. There are enough methods that you will definitely find a few that work well for you. 

BTW, there are actually 7 methods now as we have a new one.
Information about it can be found in our ASPBanner support forums

False alarm. Dumb user alert (both the classifieds customer and me).

When I test fixes, I need to be looking at the right Ad_ID to get correct results

The links to view that info are on the main users screen of the admin area.

Down below...

They wont show up unless you have that stuff enabled in the settings screen as well.

No worries

then..

is there any way I can get rid of those information shown on User activity screen, so I can at least know who logged in current day?

thank you in advance

Hi,

The source code comes with it.
They are the.vb files.

I don't give out any project files for reasons stated in the article below.

Please read this in full if you want to edit the application in Visual Studio.NET

http://support.cjwsoft.com/code/moreinfo85-1.htm

I am not sure totally understand your question.
I need you to explain it differently.

Any ".asp" page that is protected is going to automatically prompt them for a login box or log them in automatically depending on if they set that option.. In the end returning them to that same page.

So, it really all takes care of itself for the most part.. It doesn't even matter if the bookmark a protected page deep in your site. The system is smart enough to keep them at that page as well as handle their access.

Now of course if they are at an unprotected page of your site and navigate to a protected page they get a loin prompt or are allowed in if they already logged in...

Also.. when you say unprotected page ? do you mean ".htm" or ".asp"

you basically have to edit the html in the links in the various pages and remove them... some are in includes files

use a text editor and be causious / back things up before you remove links so you can revert back

IT worked just as cwilliams said. I did see the IP address being stored in the table but it didn't dawn on me that it was tied in to the view count, I tried it from a different IP address and it worked great .

Good coding Christopher

Thanks

John

yup. that is correct... they can't log in so they can't see any pages you protect

its the nature of forms based authetication

The main root of your web site needs a "aspnet_client" folder for .NET apps like ASPProtect.NET to run.

If this isnt quite right one of two things can happen.

1.) You'll get a pop-up error like this.
'Unable to find script library WebUIValidation.js'

2.) The ASPProtect login screen will come up but just not let you log in.

This folder only goes in the root. Not in subfolders and subwebs.

If you dont have this folder in the root of your web.

Read this article to learn how to properly create the folder.
http://msdn.microsoft.com/library/default.asp?url=/library/e n-us/cpguide/html/cpconconfiguringaspnetapplicationforaspnet version.asp

If the app is installed on a hosted server you'll need to ask them to do that for you.

You can also try copying a the folder from your own machine after creating it the way the article above says.

or

here is a copy of my "aspnet_client" folder created under the latest framework at the time of this writing. v 1_1_4322

2004-11-03_134912_aspnet_client.zip

I am not sure if copying it in is as good as having created by the server as I haven't had time to really test all of that but it should work. Ultimately all this does is put some files .net needs in the web.

I believe I'm having trouble with Domain masking in that it appears to affect the ASP Photo Gallery login screen.

My address is forwarded and masked by my domain "company" (in this case: Godaddy.com). It is forwarded to a Win2000 Server running at my static home IP.

From outside of my network, the website appears to work fine...even the default.asp page works to the point of the login page. After entering a login and password - you hit the login button and the page simply reloads only with all of the header and footer information removed.

I found that by eliminating the domain masking feature at the domain company, the problem gets eliminated and the entrie site works fine.

Has anyone else run into this problem? I'm guessing it's the way the domain name is held in the browser cache but I'm not sure how to resolve it so that the ASPPhotoGallery scripts and pointers work correctly.

Eric

thanks.. it was not taken as a complaint.
I just wanted to explain

When you said you tried using the web version of sql manager. Did you use the microsoft one I link to here "just curious"

http://support.cjwsoft.com/code/moreinfo127-1.htm

Hi,

Its just not enough information to go on. I need more details on what is going on. There are a lot of configuration settings in these applications. I really do not know what to make of that screen shot.

My 1st guess is that if you cannot delete a picture that the picture folder does not have delete permissions ??

I also need to mention that I am not sure what this has to do with ASPImage ?

Microsoft VBScript compilation error '800a0411'

Name redefined

/aspprotect/config_inc.asp, line 15

Dim  Address_Required,CDONTS_Installed,City_Required,Registration _Type,VerifyURL,Log_Off_Page
----^

Actually it would because you would just count records for that user that are also active

and yes, users cant delete albums.. they can only turn them off which really means the albums lose their active status

only the admin can truly delete an album the way the code is
(that's just the way I did it for some reason.. I don't remember why)

Hello,

It is very possible (just basic ASP and database accessing techniques)
It is just not the sort of thing I support in the forums as it is a customization related.

Even for me something like that would take 1-3 hours of coding time. Basically, it is just not something I could just explain to you real quick.

You might want to pick up a good book on ASP or check out some of the great resources out there. http://support.cjwsoft.com/forum/forum_topics.asp?FID=17

Doing stuff like this is relatively easy, but can be time consuming work.


In the future please use a more descriptive topic for yours posts "I need help" is not exactly helpful to anyone else searching through the forums . I therefore renamed your post accordingly.

I really try to keep the forums organized and clean. That's all.

Thanks

that would probably work...

any ".aspx" page can grab that data after someone logs in..

Session("Username")
Session("User_ID")

etc etc

anything you see set in the "aspprotectlogin.aspx.vb" file will be there

any data not set there would have to be added and then the project recomplied so that data gets saved...

yes, How can I have fixed size height and width image without distortion. Is there a component that I can use or how can I change the existing code.

yes, unless its ratio matches

how could it not be ?

Please keep questions like this in the forums... thx.
there is no need for this to be a private message

-- Previous Private Message --
Sent by : eeye
Sent : April/29/2005 at 2:19pm


If I choose fixed width and height is the thumbnail image going to be distorted?

-- Previous Private Message --
Sent by : cwilliams
Sent : April/29/2005 at 1:17pm

that is not possible unless you rewrite the code.

You onlyahve the two options we give in the config file for thumbnails

fixed width and height all the time

or

fixed width / dynamic height



-- Previous Private Message --
Sent by : eeye
Sent : April/29/2005 at 1:07pm

Hi William

One more questions for you. is there a way to make sure that all the thumbnails are the same size without distorting the images (in the thumbnails). Or if a picture's height is bigger than its width is there to create the thumbnail such that the height of the orginal becomes the width of the thumbnails and vice versa.

Basically I just want the thumbnail pictures to be in a perfect row with all the picture heights the same and all the pic width the same.

Thanks

Sean

You are right, there are NO entries in the "PayPal_Subscriber_ID" field at all. Any way of fixing this?

if it is your own XP machine there is no reason you should edit that config file manually.

simply set permissions on the data folder and all the folders in it and the application will write to the config files on its own... if you are having problems chances are you are not setting permissions correctly.. please read all of this
http://support.cjwsoft.com/code/moreinfo56-1.htm

if is not an XP machine (your post was confusing and I am not sure) then this is an article for 2003 server
http://support.cjwsoft.com/code/moreinfo136-1.htm

Most importantly whats the real error ? error 500 does not help figure out anything
http://support.cjwsoft.com/code/moreinfo11-1.htm

lastly make sure you go into iis and make that web its own application

Our home page is not showing up gives this error:

Active Server Pages error 'ASP 0126'

Include file not found

/Default.asp, line 246

The include file 'elib/articles/home_feature1.asp' was not found.

Glad it is working.. for anyone reading this the customer bascially did this
http://support.cjwsoft.com/forum/forum_posts.asp?TID=36& PN=1

That being said asp photo gallery actually has a few more places that send email that you going to need to modify as well. Off hand the reply to album, admin massemail, admin send email,and postcard features come to mind possibly as 3 of them.

using a multiple file search and replace utility like ReplaceEm would be the easy way to do all of this in one step and find all the instances

http://www.orbit.org/replace/

[QUOTE=cwilliams]Humm, Did you make any changes to the code ?
Solid Black is not the default so it must have changed at least once.[/quote]

I did change the top_logo.gif and the associated link. That was on the default page not the Solid Black skin which is unchanged. After downloading/uploading the skins I tried changing it to one of the Beach skins and that's when it changed to Solid Black and has been stuck there ever since.

[quote]Otherwise it might be some sort of application variable problem.
I would make sure the web is and "application" in the IIS console.[/quote]I don't have access to the Microsoft IIS console as this is a host site. I can access the site's "control panel" but it does allow for those type of settings. Mostly just permissions, DSN entries, etc.

Thanks.
Al

It's real easy actually if ya sniff around the source code.
ASP is so easy to (work with/edit) even if you dont know any code.


edit   "save.asp" with a text editor

change

If Request("First_Name") = "" Then
  ErrorMessage = ErrorMessage & Server.URLEncode("You must enter a First Name.\n\n")
End If

to

If Request("Company_Name") = "" Then
  ErrorMessage = ErrorMessage & Server.URLEncode("You must enter a Company Name.\n\n")
End If


From looking at that save code I dont see where Last_Name was required. The only name I saw required was a 1st name.

Also.. making the First_Name not required may break something somwhere else. I dont think it will but it might. You are warned.

The problem was that I did not have

ConnectionString = "Driver={Microsoft Access Driver (*.mdb)}.... in the connection string.

Thank You.

If you are using an ACCESS Database try to avoid using a system DSN. They are much slower because they go through ODBC which then uses the Jet Drivers to access the database. They also have to do a registry lookup.

ttp://www.4guysfromrolla.com/webtech/070399-1.shtml

http://www.powerasp.com/content/database/dsn_vs_dnsless.asp



It's funny because in the 4guys article they ask the question..

"Hmmmm... so who was right, Microsoft or Wrox?"

I'll tell you who was right and who said it 1st.  It was me and I said it on my old powerasp.com site before anyone else ever did.

I found it out on my own by experimenting when I was the Systems Analyst for an large ISP. We we had web servers that were not running well. I didn't read about this solution anywhere because no one was talking about it at the time. Microsoft said use System DSN's so everyone just took their word for it.

I took a lot of heat for saying that back in the day but over time everyone started saying it.

question 2 is answered best here

http://support.cjwsoft.com/code/code_info.asp?TID=319&KW =paypal

I should also mention that the paypal scenarios used in ASPProtect can not be tested using PayPal's sandbox. Also test using two real PayPal accounts and on a live setup. (You'll allowed two paypal accounts)

then you can log into the other and refund the transctions and of course it makes sense to use low amount like 1 cent and what not.

Also, I'd love to see what you came up with with the integration. I have been working on it here as well and took it in a different direction as I plan to sell directions for it as an add-on for aspprotect. I have it all working here but so far I dont see an easy way to let other people do it as I had to change things in both systems in a lot of places. Utimately if done under a SQL environment triggers should be used at the database level and that is another consideration.

OK.. I went with using ASPEMAIL.  The above did not seem to work.  No worries though, where there is a will (with options) there is a way.

Thanks for that.

I have tried InStr("*2*",>"0") in the query design window but it does not return any members.  

I have orded a Access Bible to help me in furture