When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner. 

The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though) 

Really the best way to show it is with an example as seen below.

Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.

All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser, 

The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser. 

In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.



On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.

http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html

This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code. 

Chris:

I just got done trying it myself and it worked great for me too. I was aware of the security issue, but I'd already planned on using SSL for this particular call, as well as for the secured pages accessed through the normal process, so the bad guys will be kept at bay.

Thanks for the help.

The links to view that info are on the main users screen of the admin area.

Down below...

They wont show up unless you have that stuff enabled in the settings screen as well.

This issue came up once before and when I investigated I could find no error in the html that aspprotect generates and those files do exist where they are supposed to. We concluded it was a parsing error from the log file system.

There just really isn't anything I can do about it. I spent a week trying to figure it out. It is just the log parser screwing up under certain circumstances where there is no reason anything is wrong. They have trouble dealing with some of the complex URL/querystrings that the ASPProtect admin area uses. They think there is a 404 eror when there isn't... etc etc

Hi Chris,

The password is HANNAH.  If you're into trouble shooting mode and would like the key, I can send it to you.  If not, no big deal, I've email the guy a new password.  We'll see how many rounds it takes him to get it right. 

Thanks,
Mick

Different Versions of the Access Database

Below is a zip file with many alternate versions of the Access Database provided to help with installation and general usage.

2005-02-20_155310_ASPProtect_Database_Versions.zip

ASPProtect.mdb is saved as an Access97 database (password "temp")
ASPProtect_access2000.mdb is saved as and Access 2000 database (password "temp")
ASPProtect_access2000.mdb is saved as and Access 2002-2003 database (password "temp")
ASPProtect_access2002_no_password.mdb is saved as and Access 2002-2003 database with no password set on it

Try to use the newest version as server odbc drivers sometimes have to use the newest version for everything to work correctly. No password version is provided because sometimes there are issues connecting to a database with a password set on it.

Default username for access databases is of course "admin" but you really dont use that except in the data connection information.

Just an update,,,

the permission were all correct.... i left it and tried from my pc at work and it works fine... so i dont know what hahhpened.... thansk for your quick response

regards

Domenic

Sydney, Australia

[QUOTE=cwilliams]Humm, Did you make any changes to the code ?
Solid Black is not the default so it must have changed at least once.[/quote]

I did change the top_logo.gif and the associated link. That was on the default page not the Solid Black skin which is unchanged. After downloading/uploading the skins I tried changing it to one of the Beach skins and that's when it changed to Solid Black and has been stuck there ever since.

[quote]Otherwise it might be some sort of application variable problem.
I would make sure the web is and "application" in the IIS console.[/quote]I don't have access to the Microsoft IIS console as this is a host site. I can access the site's "control panel" but it does allow for those type of settings. Mostly just permissions, DSN entries, etc.

Thanks.
Al

it has been 3 days since I logged myself in under Admin, and all the user information on the User Activiy screen seemed to be gone.

is there any specific length of period it refreshes its user information??

Is it possible to set the user account time limits when they register? I am using email verification and am trying to have their accout expire 32 days after their initial login.

Also I have an issue with the email notification not notifying me when a new user logs in. It does a beautiful job notifying the new user.  I do not understand why my server will send to one and not the other, I ahve searched the links but none seem to answer this.

Thank you for your help and insight

thx for posting this..


Just a few notes... more than 100 pictures specified in the config file is not supported. You are of course on your own if you specify more than 100

Also, technically the post above should say more than 102 pictures... "I think" as you wont need more html cell code until then..

The loop in the code is probably how I should have done it in the 1st place but I was in a hurry to get this finished and I also never expected/wanted anyone to specify more than 100 pics per album.

Lastly.. depending on what style you are using in the config file the code above may not work as some of the styles do not use cells but line breaks instead..   At least from what I remember.

Microsoft VBScript compilation error '800a0400'

Expected statement

/asplog/check_user_inc.asp, line 404

End If
^

Is this a standard database connection error so I should ask my IIS to make sure permissions are correct?

Thanks..!

Does ASPprotect support Paypal's Website Payments Pro option, where a user can use a credit card directly on a web site, without passing to paypal.com?

Nick

The company that hosts our business web site has been impossible to deal with in assisting me in getting asp protect to work. Getting the rights set correctly took 6 days and then getting parent paths enabled has been impossible. There last response was simply this:

The includes were changed so that if your server does not support "parent paths"
' and the "../" that you could easily change a few files like this and make the
' includes virtual includes instead of file includes. We didnt make them virtual
' includes by default because depending on where in your site you put the application
' the virtual include path would be different. They are also much different on a local
' development server than they would be on your real server
'
' Here are some examples of what you might change these includes to
'
' If you put the aspprotect folder in the root of your domain at your server
' example: www.mydomain.com/aspprotect
' then you would probably use
'
' #INCLUDE VIRTUAL="/aspprotect/dataconn_inc.asp"
' #INCLUDE VIRTUAL="/aspprotect/config_inc.asp"
' #INCLUDE VIRTUAL="/aspprotect/scripts/emailing_subs_inc.asp"
'
' Or if you didnt use the aspprotect folder and just put the contents of it in the root
' of your domain
' then you would probably use
'
' #INCLUDE VIRTUAL="/dataconn_inc.asp"
' #INCLUDE VIRTUAL="/config_inc.asp"
' #INCLUDE VIRTUAL="/scripts/emailing_subs_inc.asp"
'
' It really all depends on what works for your situation
' If you want more information on server side includes read this article at PowerASP
'
' http://www.powerasp.com/content/code-snippets/includes.asp

I am assuming that they will not enable parent paths and I need to modify some code. I do not know asp. WHere do I modify the code for a server that will not enable parent paths?

Thanks,

D

Good Evening,

I have been trying to log into my site using the protected pages comments you have in support. I have copied the code in the ASPprotect 7 guide.

<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

and pasted it in my page, set the the IIS to open this page and the page will not open it and the page will not open and the error is

Error Type:
Active Server Pages, ASP 0126 (0x80004005)
The include file 'check_user_inc.asp' was not found.
/olem/reldt/introduction.asp, line 3

When I remove the two lines of code everything goes normally.

I have aspprotect in its own directory in the website. I have read the installation several times and I am afraid I am missing something blatently obvious so I really appreciate you thoughts.

I am presently using redirects. I like not haveing to use them as your comments have suggested. I have pulled all that code from the pages I desire to protect during this test.

I have three test users in my database - 1 administrator

Any suggestions?

Thanks and best regards

Yes I did see that, and created the new project as well as imported the DLL's. I guess my question is; is it as easy as rename the file from aspprotectlogin.aspx to login.aspx and then running the release to regenerate? I know this is a novice question as I am a novice to .NET but the fastest way to learn is to do. Also I know you’re an advanced programmer with better things to do so if I’m stepping over the line from technical help to basic programming I should already know, feel free to point me somewhere ells.

Sorry about earlier post in wrong area-

I have followed instructions to set up access levels (adding the

<% CHECKFOR = "4" %>    for user level 4 for instance.) The database is connecting properly and the basic check for login is taking place, but it seems that all users have access to all levels no matter what is on the database; i.e I set up a test page with "checkfor=4" and all users have access to it, even those with lower leve access.

Any ideas?

Thanks

Really awesome, thanks..

If possible please be sure to respond to the email they send so the review ends up authenticated

The setting I am most interested in is what you have for the "Pic_Max_Image_Width" used when the image resizing components resize the big image

setting it to nothing or zero could cause this

More Info in Case Anyone is Interested:

This bug was mentioned by a couple people. The cause of it was never really understood until I recently re-wrote some of the banner code for an upcoming version.

The fix for this bug was very simple. It was just one of those weird situations where code should have worked but did not. I added some code to do it a bit differently and it worked as it should have..

It really still makes no sense to me why it didnt work the way it was, but at least there is a fix.

You can mix and match banner calling methods all you want.
Try it and see what happens.

However, the only method that is going to work on non ".asp" pages is the javascript or the new iframe method listed in the support forums.

Hi,

Sorry, but if  ".asp" pages download instead of run on a server then that means ASP is not working on the server and is not configured correctly. That is about as low level as it gets and it is really the hosting companie's responsibilty to sort that one out.

It is totally a system admininister's job to make sure that sort of thing is working. If this place supports ASP they really need to fix that for you. There really is nothing  I can do for you until ".asp" pages at least run.

As for the Free install... that is no problem. Of course you need to get the hosting company to fix the web before I can be of any help. There is more to that problem then permissions.

For starters I would make a simple ".asp" page with hardly anything it (even some simple html text is fine) and ask them why it is downloading instead of executing and to please fix things.

Hi,

The source code comes with it.
They are the.vb files.

I don't give out any project files for reasons stated in the article below.

Please read this in full if you want to edit the application in Visual Studio.NET

http://support.cjwsoft.com/code/moreinfo85-1.htm

I have an asp page that includes other asp pages via an include.  for example:

snippet code: file name: collaboration.asp

 <table bgcolor="#bed1e4" border="0" cellspacing="0" cellpadding="10" marginwidth="0" marginheight="0" leftmargin="0" topmargin="0"> 
    <tr>
    <td>     
     <!--#include file="../../../filetransfer/directory_listing2.asp" -->
    <BR><BR>
     <!--#include file="../../../filetransfer/upload.asp" -->
    </td></tr>
   </table>

I can add the code below to collaboration.asp and it seems to work,but I cant seem to figure out how to protect the other files such as upload.asp at the same time. -- can you help?  - Note: as soon as I add the code below (and adjust the path) - I cant bring up the page.

This is the protection code I am using.

<!--#INCLUDE FILE="../../../../aspprotect/check_user_inc.asp"-->

Shirely

Thanks Chris.

Your solution worked!

I finally spoke with someone who knew what I was asking for and they set the rights and all is fine.

Thanks for your help. Wish all business' had customer support like here