Blog Entry: 3/25/2006 4:35:32 PM
I just upgraded from 6.0 to 7.0 primarily because we were limited in the choices of email systems we could use to send an email validation message.
Previously, with 6.0, we were using CDONTS to send an email validation message to new registrants. Unfortunately, AOL email addressee's were not receiving the vaildation email from us. I received a reply to another post I made on this forum that the problem was due to the fact that aCDONTS generated email has no MX record and AOL blocks non-MX record containing emails.
Well, I upgraded to 7.0, switched to CDOSYS (Using SMTP Virtual Server) with SMTP Authentication and it appears that AOL is still blocking the validation email.
Any suggestions, comments?
, Hi, its just not something i can suppport as I do not support custmizations to the code epecially when dealing with an image component that is not supported by the application.
Sorry, its something you have to figure out. Bascially I would suggest looking at the existing asp image resizing code and using that as a guide.
Have you considered just buying a license of ASPImage and asking the host if they will install it after you purchase it. It sounds like it may save you a lot of time.
If you are ever looking for a good host for ASP. www.alentus.com is one of the best. There 9.95 plan gives you access to 3000.00 of commercial quaility asp components also which is nice.
,
I am not sure totally understand your question.
I need you to explain it differently.
Any ".asp" page that is protected is going to automatically prompt them for a login box or log them in automatically depending on if they set that option.. In the end returning them to that same page.
So, it really all takes care of itself for the most part.. It doesn't even matter if the bookmark a protected page deep in your site. The system is smart enough to keep them at that page as well as handle their access.
Now of course if they are at an unprotected page of your site and navigate to a protected page they get a loin prompt or are allowed in if they already logged in...
Also.. when you say unprotected page ? do you mean ".htm" or ".asp" cwilliams38298.6571759259, just FYI -- i added in a new data table into the database. I
havent finished implementing the whole thing across the entire site,
but it wasn't too difficult. Once I have all of the functionality
complete I'll post some details. Some of the changes are the
addition of a new album nav style which combines style 2 and some of
the features of the new data table.
Very easy app to work with guys.
, Hey, I thought I'd share this tip with the ASPProtect community...
If you'd like to remove, modify, or add fields to the "Users" view in
the password_admin default.asp page, it's really easy to do. Well, at
least it was for me. I'm using an MS Access database, by the way.
For me, I don't need "Company" info, but I do need last access and # of
times accessed displayed. Therefore, I had to change the default page
in three areas:
In /password_admin/default.asp, go to about line 185 or so, where you see stuff like:
[code]<td valign="bottom"><font face="Arial" color="#000000"
size
="2"><b>First Name& lt;/b> </font></td> [/code]
OK, those are the column headings. Each one corresponds to a column
from your USERS table in your database. There are two more areas to
consider, both of which appear immediately after this section.
The next section has statements that look like this:
[code]<td valign="bottom"><a href="<% =THISPAGE
%>?SORTBY=First_Name+ASC&MyPageSize=<% =MyPageSize
%>&Keyword=<% =Server.URLEncode(Keyword)%>"><img
border="0" src="../images/sort_ascending.gif" Alt="Sort
Ascending"></a><a href="<% =THISPAGE
%>?SORTBY=First_Name+DESC&MyPageSize=<% =MyPageSize
%>&Keyword=<% =Server.URLEncode(Keyword)%>"><img
border="0" src="../images/sort_descending.gif" Alt="Sort
Descending"></a></td>[/code]
See the "First_Name" items? The first is for an ascending sort, the
second for a descending. This particular line corresponds to the code
snippet immediately above it. But all this does is handle the sorting.
For the actual data, look lower for this stuff:
[code] <td bgcolor="<% = Cellbgcolor
%>"><font face="Arial" size="1"> <%=
CmdListUsers("First_Name")
%& gt; </font></td> [/code]
It's a good ways down, so don't be impatient if you don't see it in 10
lines from the end of the last mentioned section. This stuff handles
the display of the data from the database (where else ya gonna get
data, anyway?)...
Now, to remove a field, you need to find the three sets that go with
that data. The ascending/descending sort is potentially the trickiest,
because it's the longest set of data and can take a number of lines.
Just clear it from the start td to the end /td and you'll be fine.
To *add* a field, copy and paste the code from an existing field and
modify it. In the first one, the column title, you can type whatever
you want to describe your info. Nobody but you and your admins will see
it. For the next two sections, though, you need to get the correct
column heading from the USERS table and use that to correct the lines
in the copied code you pasted in.
For example, when I added a column to show the number of times a user
logged in, I copied the above snippets and pasted them in where I felt
the column I needed should be. Then, in the first one, I changed "First
Name" to "Logins". In the ascending/descending snippet, I changed
First_Name to Counter. Same for the last snippet.
The result? A new column, showing the number of logins my users were successful with.
Of course, before you experiment, back up your existing default.asp file, JUST IN CASE.
Have fun!
, Hello,
While there is no option in the admin area / asp code we give you here is what I can tell you.
You have the source code and we also use an open database structure. (MSAccess or MSSQL) So that means you can really run any query you want on the database whether with ASP code or directly in your database. You can even tie other systems and code into the database via OBDC and manipulate data. The sky is the limit.
In MSSQL you can run queries in SQL enterprise manager or query analyzer. Using Access you can run queries in query view.
It's really not that hard if you do some research on SQL Statements and how to use them. You can do some very powerful queries and save yourself a lot of time. ,
I can no longer send e-mails to my configured accounts through aspbanner. It was working for over a year and now it stopped.
At one point I was using CDONTS_Installed but since I moved to a new Windows 2003 server I was told by my ISP that either one of these will work
but neither one works. Can some one assist?
JMAIL_Installed
ASPEMAIL_Installed , Tony,
ASPBanner.NET was discontinued about 14 months ago. It is no longer supported in any way because quite frankly the classic ASP version is faster, more stable, has more features, and is a lot easier to install and get running.
If you PM me via the forum you are welcome to a copy of the current ASP Unlimited Version. It can serve banners to any type of page extension. All you have to do is ask for a copy.
Whether or not your existing ASPBanner.NET database is exactly the same structure I do not know, but I believe it is. You should compare the two if you plan to keep using the old database and make any neccessary changes so the old database has the exact same structure as the new version. If there are any differences they are very few. ,
I have switched to Alentus and have the permissions set correctly and Parent paths turned on. I cannot figure out how to connect to the database. Should I have the database in the aspprotect/data/database folder, or in the data folder that Alentus has in my root directory? once that is determined, how do I decide what the path to that database is? I have tried many things, but this is what the setup page tells me to enter in the data_conn file DBQ=D:\Websites\www.mysite.com\aspprotect\data\database\ASPP rotect_access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp
Thank You , You shouldn't be renaming or moving anything... unless you really really understand what you are doing and are at an expert level expert as far as ASP coding goes.
like I said earlier..
http://support.cjwsoft.com/code/code_info.asp?TID=354&ge t=last#1130
redirecting with version 6 is not supported but this thread tells you exactly how to set it up (I showed you this thread in an that earlier post)
http://support.cjwsoft.com/code/code_info.asp?TID=17&KW= redirect
This thread below may also help in case the page you want to start on with a login form should not be password protected..
http://support.cjwsoft.com/code/moreinfo18-2.htm , Yeah sorry you are right. It works for me
http://www.rottys.net/gallery/default.asp?CatLevel=2&Cat 1_ID=5
, as far as sql goes if you follow the instructions with give for setting up a new database you shouldnt have any issues and permissions should be already set. because we handle that in the sql script we give you.. "its a good thing to look at and it is pretty easy to understand what is going on""
however using another account could cause permissions issues.."yes, even sa" basically the username your using needs datareader and datawriter permissions to all tables used by the photo gallery system and you probably have to go specifically set them usin ght e security tab for your database in enterprise manager. This is more of SQL server 101 than anything to do with the Photo Gallery Code so I am not going to get into it too deeply, but that is definetly the issue. Permissions...
cwilliams38303.6065740741, Got it working.  Had purchased a long time ago and forgot about needing to run the userreg.exe. All is well and thanks for the follow up.
Lance , yes, there is upgrade pricing
http://www.aspprotect.com/purchase_v7_upgrade_pricing.asp
and upgrade instructions here in the forums
if you install it in the same directory structure you wont have to make any changes to the pages in your site you have already protected.. because the code to protect a page will be the same
now, anytime you upgrade an application like this there is going to be a lot of work involved especially when there have been so many changes
http://support.cjwsoft.com/code/moreinfo173-1.htm
whether or not you upgrade is up to you
Like I said you can make version 6 work with CDOSYS and a remote email server. You just need to do some research on CDOSYS code and spend the time needed to make the code use it. I however am not going to spend time detailing all of that when I created a new version that does it.
, sorry,
there is not.. it gets really complicated
its practically a miracle it does what it does due to the nature of the web
perhaps with some modications it could do mroe but the current version pretty much does what it does
, again I will ask you what is the real error??
see the link above when I asked you the 1st time.
(I need the error details and line number.. etc etc)
and what kind of a server are you trying to run it on ?
you mention xp pro but in a confusing way ? , Hello,
You are correct regarding what you noticed.. ASPBanner only allows one person to administrate. If if did what you are asking about it would probably cost more.
(you get the ASP source so if you really wanted that you could always add it on your own fairly easily, but it all depends on your skills)
AS for keyword advertising and different ads based on certain pages ASPBanner does not get into that. The main reason being performance as I built ASPBanner primarily as a performance banner rotation solution.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=144& ; ; ; ; ;PN=1
Like that thread says, you could make different zones for different conditions.. then surround the banner calling code with if else logic so a different banner zone was called under certain conditions.
Regardless, if you really need something that has every bell and whistle. BanManPro is where it is at. cwilliams38434.7100578704, This relates to a part of the new documentation that wasn't ready yet.
I just made a thread about it though.
Here you go.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=198& ; ;PN=1&TPN=1 cwilliams38419.5353587963, If they changed the paths they moved the site.
That means permissions for the database folder must be set again.
If permissions are not set and you are not using the correct new path info then you will still get errors.
Those errors the server reports back and quite generic and do no mean exactly what they say. They just mean everything is not perfect.
And everything just has to be perfect.. cwilliams38306.5069328704, Awesome -thanks - I'll give it a try , cool.. let see if that works. This was the command line that I had to enter in order for it to register. Chris, as you stated before, you can try one of the other emailers, but you need a email server to tie to.
"regsvr32 cdonts.dll" , Does ASPProtect 7 work with SQL 2005?, When I go to set up a new user, my user name and password are already in the window. And I am un-sure why. I start a new browser, and again that my same user name and password is in that window., I'll try to help when I get back tues night,, see the contact page for info on where I am .
http://www.cjwsoft.com/contact/default.asp?Subject=CJWSoft+G eneral+Inquiry ,
ok "ace45",
I just spent a bunch of time in your setup using SQL server and I didnt have a single issue. It all seems to be working perfectly to me.
I got into the system using the "get_me_in.asp" page like the instructions say to to.. then I deleted those two users you had there.
I created a new user called "admin".. then I edited that user to make him an admin.
I have logged off and back on as that user a bunch of times without issue.
admin
test
is the user info..
I just didnt see any problems whatsoever???
I also took the liberty of going into the settings page and setting all that up for you as well so all the url paths are right now and emailing from the application works.
I am going to wait an hour or so and try to log in a few more times but it honestly seems to be running perfectly to me. , Disallowed Parent Path
The Include file '../dataconn_inc.asp' cannot contain '..' to indicate the parent directory.
When you get an error like this it is because parent paths are disabled on the web server. This is a setting in the IIS console for your website.
If it is not enabled on you server you will have to ask your host to enable parent paths for your website.
This is what the settings screen looks like on an XP Machine
Additional Information:
It is enabled by default on IIS4-IIS5 but in IIS6 it is disabled by default.
It is a minor security risk to have enabled and some hosts can be difficult about setting it.
Truth is, if your hosting ASP for customers you need to enable this setting if the customer requests it. Especially since 90% of the ASP applications out there require the setting.
Hosting companies should if they are serious about hosting ASP.
If they won't your only option is to go through all the code and convert the file includes to virtual includes.
http://www.powerasp.com/content/code-snippets/includes.asp
The trouble with virtual includes is they are different depending on the layout of your website. (that's why web application developers generally don't use them)
Basically if you are in a sub domain the path for the virtual include is going to be different then if you were in the root.. etc etc
Also.. someone developing on a local machine would need totally different virtual includes on the development server than they would on the live server. Server Side includes are processed before ASP so there is no way to make them SMART, so to speak. Server Side includes are hardcoded and that's that.
In my opinion virtual includes are pretty useless for commercial web based applications... Since you don't know where the customers plan to install the apps.
And YES there are some tricks when designing the applications that make it less of an issue but they are not perfect solutions.
For example...
The virtual include below would work if the application or code was installed in the root
<!--#include virtual = /somefile.asp"-->
But if the application or code was installed in a directory called "somedirectory" the virtual include directive would need to look like this
<!--#include virtual = "/somedirectory/somefile.asp"--> cwilliams38391.6033101852, As I already had directories in my web site root called 'images' and 'templates' I loaded the files into a sub directory called 'aspprotect' as suggested in the installation guide where it say 'either way it really doesn't matter'.
However, it does.
The scripts are often looking for a file which it can't find because the /aspprotect part of the path is missing. Example:
I can't find a way of editing all the scripts that need changing. I'm assuming it would be easier to change my site to avoid using subdirectories used by aspprotect and reinstalling from scratch straight into the root directory.
Anyone with any suggestions?
Many thanks
Ian , The path is correct for the logfile directory. This is still not working.
, you can not limit image size using the pure code upload method. Its not possible using a pure asp method that I know of.
You would have to be using one the supported commercial upload components and edit the upload code accordinly to limit upload sizes (you would do this by looking through their documentation and samples) I didnt include any support for upload file size limitations with the supported 3rd party upload components because in my testing I found it problematic with all but aspupload from persits software. (I have example coe for that component I can provide that limits the upload size and seems to do it well) I am sure it could work with safileup and dundas as well but I gave up trying.
As for image resizing..
Image resizing requires the use of one of the supported 3rd party image resizing components. You didnt mention if you are using one or not. If you dont have one available image resizing is just not possible as asp can not do that on its own. ,
Hello,
I want to create a user for my manager. This user should be able to see
all statistics (Reports) and all (Banners). But, he should not be able
to edit anything.
How can I create the type of user described above?
Best regards,
Mohammad Al-Mohsin
, I really do not know for sure, but I imagine there are customers using their windows hosting. Usually I do not know what hosting company a customer uses and I am usualy the only one that responds to forum questions.
Why not download the current Free lite version and try it out ?
CJW
, I do not really know a lot about but it is basically code that lets you specify however many number of images and links... and then display a certain number of them at once.
You'd have to search google for it.. there are 1000 of sites that offer free javascript code and that is where you find scripts like that.
You could certainly set up all the images and links for each banner in aspbanner but if you used them with code like that you be limited to tracking clicks on banners. Tracking page impressions would not be possible because the javascript would be handling what images get displayed at any given time. Basically each link for each image would be going through aspbanners tracking url feeding it the banner id and therefore tracking the click and sending the user to the desirec URL.
Regardless, it is not something I would support. You would have to sort it out as it is nothing ASPBanner was designed to do and not something I want to deal with because client side javascript code is not something I am NOT very good with. , probably.. better than what we are accomplishing here LOL
or if you like send me the import file and your encrpytion key and I will try it out here and see what happens
either way PM me any sensitive info if any
, More Upgrade Info
To upgrade an existing ASPBanner system please follow these steps.
Back up your old system completely before starting.
Install the new system per the installation instructions that came with it.
Once it is running simply use your old ASPBanner database with the new system.
You may also want to keep your banner images folder from before in the same location so your existing banners still link to valid image urls because the new system stores banner images in a new location.
Since the config table in the database is no longer used you will need to go to the settings screen of aspbanner again and configure things. The config table in your old database can be deleted or left alone. It won't be used anymore so it does not matter either way.
That is all there is to it. If you have any issues please ask in the forums and we will help you out. cwilliams38211.7525231481, You would set the groups during users signup the same way you would do the expiration in the following example.
http://support.cjwsoft.com/code/moreinfo170-1.htm
The groups field need to be set the exact same way it would look like in the database of course
So, if a user was part of groups 1, and 2
You would look in the database and see this in the groups fields for that user
*1*,*2*
so in the signup code you set that like so
CmdAddUser.Fields("Groups") = "*1*,*2*"
This info only applies to resgitrations and signups using the "users" folder.
if you wanted to make different sceanrios you would need to carefully make a copy of the users folder and adjust it accordingly , 1st of all when I look at the site I see a lot of non US characters and I can see the regional settings of the site are foreign.
ASPClassifieds in only intended to run under US and Canadian regional settings as stated on the site.
Thus the BIG notice on the purchase page.
http://www.aspclassifieds.com/purchase.asp
It won't run right like that for a lot of reasons and it is not supported like that as that notice says.
The categories showing 0 is just one of the problems you will have.
If I help you fix this it will just lead to 4 more issues right after.
If you would like support with the classifieds application you need to run it on a server with US or Canadian regional settings like the site says. , YAY! I FOUND A BUG IN MY TESTING!!! Do I get a cool t-shirt or a coupon for Ben & Jerry's Ice Cream? 
Hehehe... seriously, thanks for digging deeper and spotting the error.
You got some mad skillz and some excellent service, Mr. Cwilliams!
, I'm in the process of incorporating the ASP Gallery functionality within my current site design.
To begin this process I'm taking each page and I'm wrapping the ASP
Gallery code with my site design [essentially I'm allocating this
application the center of the page]. When I pull in the
default.asp into the site the contents of this page make the entire
page too wide. I can't see where ASP Gallery assigns itself a
width.
I'm working on this as a side project so I'm not terribly far along
since I need to change all of the font assignments within the system to
style assignments and it's a slow go.
Any insight would be a great help, there's a lot of re-write in what I'm doing and i don't want to affect functionality.
if you want to see the page and what happens -- http://www.iphotosite.com/galleryapp/default.asp
Don't go to www.iphotosite.com because I havent moved it to its own location yet.
, That did the trick. Once again a quick very helpfull reply.
Thanks. , The login page sends the user to redirect.asp (which is as follows)
<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
<%
If InStr(Session("Groups"),"*1*") Then
Response.Redirect("gp01.asp")
End If
%>
<%
If InStr(Session("Groups"),"*2*") Then
Response.Redirect("gp02.asp")
End If
%>
I am not being redirected to gp02.asp if I am a member of group2. Also, we wish users who are part of group 2 and 3 to go to a different page (ie. gp2-3.asp)
Thanks in advance.
,
Timecard Entry: 3/25/2006 4:35:32 PM
CVX Training, DMS-10 Planning, Manning NOC. Resetting open modems. Busying out a card on total control for a complete reset of the card., Resetting modems and downloading Netscape Customization Kit for a customer who wants to disable content filtering., Every call I took in was in regards to Modems. In all cases the reason customer could not get logged in was due to defective modems except 1 in which case I added PCTell strings and that solved that modem issue. Customers being very good today. Other techs doing a very nice job., travel from WDT to clayton, Lunch, signed up a new customer and did a setup. also had did some voicemails, Steady morning. Quality checked sign ups, cancellations, reports, callbacks from voicemail, checled emails, answering phone, taking sign ups., Reset Total Controls, and Compaq's., travel to watertown for meeting watertown scholl district, Looking at Matts project to help him locate errors, helping bill with events calendar., on phone for a long time with Pat Anderson, acct. no. 200. Still not resolved. Wonders where website billing comes from. Unable to contact amy or lisa about this yet., working on a mess of different task for the receptionist down stairs.....one machine has messed up perms, another needed access to Konica....helped Joann set up her ICQ. Working with Ron to temp replace DHCP server with a faster one with more memory so we can fix the problem with the admin login (whoever built this one should be shot),
pick up info from clayton,check emial/voice mail- jeff mart- blue maxx- domain promary number information- left message for changes
do reports for weekly sales
sne emails to staff regarding supplies
new intern- show hearld building, trsain on frontopage- go thru web site with JD
fill out forms for thousand islands interns last week
, *CommArts, Billing w/ Carol for Bell Atlantic. Using new database as I worked on billing making corrections and updates, work on 401k paperwork and insurance paperwork, More email, including note to Chris Wms and Steve about problem with cortlandmls.com listing sys, Drive back to Clayton, learning - CHR conference call, enter multiple deposits, pull invoices, file, email / timecards, Calls from the Lowville area. 3 calls with WIN Modems conflicting with IRQ's. System configurations, Called users back on voice mail, and RAD. , BERNIERCARR.COM STARTED FORMATTING PAGES AND INSERTED PHOTOS, budgets, Clayton Meetings, picked up later in the evening., The night went pretty well. Nothing overly busy. A lot of ring no answers on 5000 and 5500 numbers. Other than that, things went pretty smooth,
|
