You would set the groups during users signup the same way you would do the expiration in the following example.

http://support.cjwsoft.com/code/moreinfo170-1.htm

The groups field need to be set the exact same way it would look like in the database of course

So, if a user was part of groups 1, and 2

You would look in the database and see this in the groups fields for that user

*1*,*2*

so in the signup code you set that like so

CmdAddUser.Fields("Groups") = "*1*,*2*"

This info only applies to resgitrations and signups using the "users" folder.
if you wanted to make different sceanrios you would need to carefully make a copy of the users folder and adjust it accordingly

Ok I used the following for the sql string.. is this correct?

SELECT COUNT(Album_ID) AS Alb_Count FROM " & tbl_label_albums & " WHERE (User_ID = " & CmdListUsers("User_ID") & " AND Album_Active = '-1'" & ")"

It almost seems like allow images is denied.  When I look at the ad it doesn't even show a place where the thumbnail or image would go:

Columns now are Ad Name/ Price / Expires / Hits

There used to be one before Ad Name.

Even unchecked (saved) and checked

Use_Picture_Upload

< = value=True name=Use_Picture_Upload> Check this if you will be using the picture uploading feature.

Good Evening,

I have been trying to log into my site using the protected pages comments you have in support. I have copied the code in the ASPprotect 7 guide.

<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

and pasted it in my page, set the the IIS to open this page and the page will not open it and the page will not open and the error is

Error Type:
Active Server Pages, ASP 0126 (0x80004005)
The include file 'check_user_inc.asp' was not found.
/olem/reldt/introduction.asp, line 3

When I remove the two lines of code everything goes normally.

I have aspprotect in its own directory in the website. I have read the installation several times and I am afraid I am missing something blatently obvious so I really appreciate you thoughts.

I am presently using redirects. I like not haveing to use them as your comments have suggested. I have pulled all that code from the pages I desire to protect during this test.

I have three test users in my database - 1 administrator

Any suggestions?

Thanks and best regards

1) Does everything, i.e. every user, every category, every product, etc., get stored in just one single database, or are there multiple databases at work and are linked to one another?  I am asking because there is only one table in the DB, and it is the "Users" table.  So I am presuming that there must be other databases that are linked to the DB.  Is this correct? 

2) Are user-level security permissions utilized in the sample Access DB that is shipped with the software?  I am asking because we cannot seem to remove the "temp" password no matter what we try, and this is the only reason I can think of. 

Got it working.    Had purchased a long time ago and forgot about needing to run the userreg.exe.  All is well and thanks for the follow up.

Lance

Things have now changed I found out godaddy has persitis aspUPload and aspjpeg as value added products, I have the aspjpeg working but have been unable to upload when using aspUPload, everything works fine with the vbscript method so I think my permissions are correct. Whenever you get a chance, any help would be appreciated.

Thanks

Mark

I believe what happened is we received the older copy of ASP Banner iwht our purchase of ASP Protect and were notified of a free update to download aspbanner_unlimited_v8.2_feb_26_2005.zip which we did, and that's the one i recently put on our site.

  Sounds from your reply that something technical is going on to the point where I will have to hire one of our Web consutants to dissect for us.  We'll try again and track our issues and send another request for information when we can show you a specific example of what is happening.  I'll be in touch.

Yup everything looks ok - but why no error?

This just gets better - now the email a friend link says sent successfully and doesn't send out - what the heck...

What would cause it to 'think' it is doing the task yet still fail?

humm.. can I possibly see this happening ?
any changes to that part of the code ?

The stat not show when  impression over  xxxxxx

I use  aspbanner v8.1   MS SQL version

Total Impressions	83523
Total Clicks	7
Total Clickthru	.0%

Microsoft VBScript runtime error '800a0006'

Overflow: 'CInt'

/aspbanner/stats_window_admin.asp, line 257

Hello,

It is very possible (just basic ASP and database accessing techniques)
It is just not the sort of thing I support in the forums as it is a customization related.

Even for me something like that would take 1-3 hours of coding time. Basically, it is just not something I could just explain to you real quick.

You might want to pick up a good book on ASP or check out some of the great resources out there. http://support.cjwsoft.com/forum/forum_topics.asp?FID=17

Doing stuff like this is relatively easy, but can be time consuming work.


In the future please use a more descriptive topic for yours posts "I need help" is not exactly helpful to anyone else searching through the forums . I therefore renamed your post accordingly.

I really try to keep the forums organized and clean. That's all.

Thanks

Hello,

What is the difference between the paypal_sub_signup and the paypal_signup directories?  Also, I know it depends, but what directories and files can I delete from my web server if I am not using them?  I copied the entire set of files that came with the program over to the webserver and I am concerned that there is too much out there.

Jess

Good Morning - I am receiving an Http 500 internal server error when I go to add a new user via the register.asp page.   the url when the error appears is: .../users/add_new_account.asp

I think the error has to do with my email component setting - becuase it works fine otherwise.

I have the email component setting set to CDOSYS (using remote server) with the mail.remote.server set to email.cidra.com - email address set to webmaster@cidra.com

Note: I receive the email notification and the user does get added.

Can you help please? Shirley

UPDATE...I just figured out that it only errors when the email address I use for the user is NOT from cidra.com -- Any idea why?

Additional Information.

A set of these variables get created for every user that logs in to your site.
For performance and memory conservation reasons some of them can be turned off and are optional.

If you look in the "check_user_inc.asp" file or the "check_admin_inc.asp" file you will see a section of code like this


   ' Start of optional session variables to be set
   ' Recommended that you remark out any of the session variables below that you don't really need to use
   ' This will save a lot of server resource because every user logged in has a set of these
   
   ' I added some code here to not create these if they are empty
   If CmdCheckUser("First_Name") <> "" Then Session("First_Name") = CmdCheckUser("First_Name")
   If CmdCheckUser("Last_Name") <> "" Then Session("Last_Name") = CmdCheckUser("Last_Name")
   If CmdCheckUser("Company_Name") <> "" Then Session("Company_Name") = CmdCheckUser("Company_Name")
   If CmdCheckUser("Email") <> "" Then Session("Email") = CmdCheckUser("Email")
   If CmdCheckUser("Address") <> "" Then Session("Address") = CmdCheckUser("Address")
   If CmdCheckUser("City") <> "" Then Session("City") = CmdCheckUser("City")
   If CmdCheckUser("State_Province") <> "" Then Session("State_Province") = CmdCheckUser("State_Province")
   If CmdCheckUser("Zipcode_Postal_Code") <> "" Then Session("Zipcode_Postal_Code") = CmdCheckUser("Zipcode_Postal_Code")
   If CmdCheckUser("Phone") <> "" Then Session("Phone") = CmdCheckUser("Phone")
   If CmdCheckUser("Custom1") <> "" Then Session("Custom1") = CmdCheckUser("Custom1")
   If CmdCheckUser("Custom2") <> "" Then Session("Custom2") = CmdCheckUser("Custom2")
   If CmdCheckUser("Custom3") <> "" Then Session("Custom3") = CmdCheckUser("Custom3")
   If CmdCheckUser("Custom4") <> "" Then Session("Custom4") = CmdCheckUser("Custom4")
   If CmdCheckUser("Custom5") <> "" Then Session("Custom5") = CmdCheckUser("Custom5")
   If CmdCheckUser("Custom6") <> "" Then Session("Custom6") = CmdCheckUser("Custom6")
   
   ' End of optional session variables to be set

If you do not need a particular variable to be set as a session variable simply comment that line out with single quote.

If you have an extremely busy site with a lot of users this is a good idea. If not, you probably don't need to bother doing this. I added some code in there so they will not be created if they are empty and that alone helps out a lot.

I dont understand why I would get an error? -- I'm not sending the email from internal - so why would it try to validate?

I'm trying to send an email to an independent place - just like I would send an email to you

Am I using the wrong email setting - should I be doing something other than using "remote server"

is that lindsey lohan and her fake boobs as ur avatar?

I am installing IIS and all of its glory on the other computer now... gotta love remote desktop (the pc is at work  )

While my host says the permissions are now correct....its still trying to download the setup ASP file instead of executing it.

I really need to get this application working asap too.  I noticed the purchasing page said that install came free.....so any help would reaallly be great.

re

The company that hosts our business web site has been impossible to deal with in assisting me in getting asp protect to work. Getting the rights set correctly took 6 days and then getting parent paths enabled has been impossible. There last response was simply this:

The includes were changed so that if your server does not support "parent paths"
' and the "../" that you could easily change a few files like this and make the
' includes virtual includes instead of file includes. We didnt make them virtual
' includes by default because depending on where in your site you put the application
' the virtual include path would be different. They are also much different on a local
' development server than they would be on your real server
'
' Here are some examples of what you might change these includes to
'
' If you put the aspprotect folder in the root of your domain at your server
' example: www.mydomain.com/aspprotect
' then you would probably use
'
' #INCLUDE VIRTUAL="/aspprotect/dataconn_inc.asp"
' #INCLUDE VIRTUAL="/aspprotect/config_inc.asp"
' #INCLUDE VIRTUAL="/aspprotect/scripts/emailing_subs_inc.asp"
'
' Or if you didnt use the aspprotect folder and just put the contents of it in the root
' of your domain
' then you would probably use
'
' #INCLUDE VIRTUAL="/dataconn_inc.asp"
' #INCLUDE VIRTUAL="/config_inc.asp"
' #INCLUDE VIRTUAL="/scripts/emailing_subs_inc.asp"
'
' It really all depends on what works for your situation
' If you want more information on server side includes read this article at PowerASP
'
' http://www.powerasp.com/content/code-snippets/includes.asp

I am assuming that they will not enable parent paths and I need to modify some code. I do not know asp. WHere do I modify the code for a server that will not enable parent paths?

Thanks,

D

ok... glad ya figured it out.

Yes.. for ASP server side code to run the page extension must be ".asp". I was gonna mention that but I guess I just didnt think anyone would do that.

no offense.. not everyone works with this stuff every day..

Dear Support Team

I have read and Installed your v8 banner software

exactly as explained on XP pro which contains other asp working app.

I have problems with the " Application " and " Session" in your scripts

things that make the iis fall dead.

also in the file asp _unlimited_config.asp

you have exlained that every thing must be kept without the "" marks.

well i get http 500 error cause of it.

Please advise

Thanks

Ran

Thanks.

Nick

I dont know about your error on line 6 when uploading..

as far as the manaully edited import file not working I would really need to see it. There has to be somethin wrong with it's format.

I really need more information and possibly acess to the system to do some troubleshooting...

This is anot a feature anyone has ever had an issue like this with.

ASPProtect protects ".asp" pages only.

That is your problem.

New Version 8.1 Released

Whats new..
http://www.aspbanner.com/v8_notes.asp

Upgrade Instructions...

Upgrade at your own risk. Though we try new versions are not always perfect due to minor bugs we may miss.

Back up your old setup so you can revert back if necessary..!!!
Save your data connection string info in a text file so you have it.
You can get that by viewing the system info page in the admin area.

Carefully copy all the ".asp" files from the new version to the old.
Your going to want all the .asp files in the aspbanner folder.
Your going to want all the .asp files in the aspbanner/scripts folder

Copy the aspbanner/images folder because there are some new images

Be sure to also copy the "data/config" folder files.folders as well as a lot of that is new including the actual config file. If you dont get the new config file copied in there you will have problems later on with some of the new features.

Be sure to create a new folder in the "data" folder called "tempstats"
Make sure it has proper permissions if you plan on using the delayed stats feature as the stats gets temporarily stored there. 

Go back to the area where you originally setup the data connection and do that again...

From the web browser run the following URL

http://yoursite/data/config/aspbanner_unlimited.asp

Replace "yoursite" with the proper url info relevant to your web site location.

When run via the web server that page will ask for a password. By default it is "temp". You should change it later on for security reasons. That page tells you how.

Now... moving on..

There were no changes to the database except for SQL Server users so you can use your existing database.

SQL Server users that want to use the new stored procedures feature (it's optional) will need to update their SQL database with the stored procedures.

Scripts to do that are provided.


ALSO: I have been running this new version using SQL Server Stored Procedure mode for a 1 week on a special banner server that serves banners to many of my own sites. I have also been using the new Delayed Stats feature.

All I can say is it is running like a champ and the SQL server is using less memory than it ever did before.

ASPProtect v7 comes with working example code of protecting a file download.

This comes with the system as an example folder with some files in it.

(some of the initial purchaser's of the system might not have that directory.. if that is the case please ask)

Here is how it works...

Basically we protect the file download by only allowing a logged in user to download it. The special ".asp" page we use the stream the file is password protected. It also hides the true location of the file so you can keep your files out of your web or keep them in a folder in your web that does not allow file browsing. Under this scenario even if someone looks at the html source they can not tell where the file really came from and they can only download if they are logged in and you offered them the link to the file.

For the file download protection examples to work you may need to edit some values
in the stream_download.asp file that are valid for your setup.

Look at the source. The values you can edit are commented.

Now, you also need to call a valid "download file name" from the download_link.asp file which is an example of how make a download link to the streamed download.

If I would like a link on my web page that will take someone to the login page (I would also like this page to contain forgot passord? and register)   I am not entirely clear what file to link to to do this.  Would it be check_user_inc.asp?

Thanks in advance?

Hi all,

I have the photo gallery set up at www.kashabowieoutposts.com/gallery

It's great - love to work with it.

But I've never been able to get those with just User permissions to be able to upload... Only an administrator is successful in uploading.  This was no problem in the past, but now this client would like to give their guests a means to share their pictures on their site - so now I have to figure out the bug...

... this is the error I keep getting...

Your upload did not succeed, most likely because your browser does not support Upload via this mechanism.

Your browser must support a standard called RFC 1867. Please check with your browser vendor for support of this standard.

------- anyone else experienced this?

Many thanks all!!

Doug

I am trying to import a file, and I get this error:

Microsoft VBScript compilation error '800a03f9'

Expected 'Then'

/aspprotect/password_admin/upload_post.asp, line 6

If Session("Admin") <> "True"
-----------------------------^

Any suggestions on how to fix it?

Thank you.

Upgrade from V6 to v7.x with an MSACCESS DATABASE

1st of all, backup your existing ASPProtect files and database before performing this upgrade. Please be really careful while performing this upgrade. Version 7.x  is a highly advanced application compared to any previous versions. CJWSoft under no circumstances is responsible if you lose information or have website downtime.

BOTTOM LINE: (PERFORM THIS UPGRADE AT YOUR OWN RISK)

To do this upgrade you're going to need to have the Microsoft Access Application.
To work with an Access .mdb file it can not be newer than the version of Microsoft Access you are running.

That being said, on with the upgrade..

Open you're existing Acccess Database up in Microsoft Access..
You should see this something like this.



By right clicking on then choosing rename
Rename "Users" to "ASPP_Users"
Rename "Groups" to "ASPP_Groups"

If you do not have a "Groups" table do not worry about it right now.

Now right click and DELETE the Config Table.
Yes, delete it..

You should now see this. (with or without the "Groups" table)



Now, right click on "ASPP_Users" and go into design view.
It should look like this.


Rename the "Password" field to "Old_Password"
Be sure to spell it perfectly using the Underscore
It will look like this.


Now scroll down to the bottom a bit It should look like this.



Now..

If you have a "Groups" Field... leave it alone
If you do not have a "Groups" Field add one and make it a memo field.

Now, we are going to add a few more new fields.

Add a field called "Redirection_URL" make it a "text" field with 150 field size
Add a field called "PayPal_Subscriber_ID" make it a "text" field with 100 field size
Add a field called "Newsletter" and make it a yes/no field
Add a field called "Password" and make it a "text" field with 100 field size

It should now look like this.
(you do not need to worry about the field descriptions.. that part is optional and only seen when working on the database)



Now close that window and save the changes..

Your now going to open up another Access Database while still leaving the one you have on your screen open. You going to open up one of the new databases that came with v7.x. This database has some info we are simply going to copy and paste.

You'll want to open it and put it side by side on your desktop like so.
(the old database is on the left.. the new one is on the right)



Now, for the fun part.

On the new database to the right.. right click on the "ASPP_Config" table and pick "Copy"

Then move your mouse over to the old database on the left. Right click in the open white area and click "paste"

It will ask you for a database name. Type in "ASPP_Config"
Leave "Structure and Data" checked and hit OK

Your old database on the left should now have a nice new "ASPP_Config" table.

OK, now for the "ASPP_Groups" table

If you already have a "ASPP_Groups" table in your old database you are done.

If you do not have one your going to copy and paste the table from the New Database to your old database just like we just did with the "ASPP_config" table.

Your old database should now look like this.



Now, you are done upgrading your database from within Microsoft Access.

The existing passwords still have to be encrytped and moved from the "Old_Password" to the "Password" field

To that we have a special page we run in the application that will take care of that.

So, for now... go install the application, but using the database we just created.
Follow these instructions for the most part...
http://support.cjwsoft.com/forum/forum_posts.asp?TID=181& ; ;PN=1

When you get to the part where you finally get into the admin area and need to make an admin account you will notice that your existing user database is there but none of the users have passwords if you look at them in the edit screen.

That is normal. Simply do what the instructions say and create and admin account using a username that does not exist..

Then log off... then back in as that new admin account. If that works you are ready to convert the passwords.

This part is very easy.

You want to run a special page via the browser.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

Replacing the part in blue with your website info.

Once you get the page running you will see a login prompt and one form field just like before with the "get_me_in.asp" page

You will need to paste the "PasswordEncryptionKey" value that you used in the "config_inc.asp" file in the form field and hit enter.

If all goes well you will see a page telling you to click here to encrypt the passwords and copy them over.

So do what it says... dont click more than once and wait.

Eventually it should say it is finished. So go log in to the admin area of the system using the new admin account.

Now edit some users but dont save... you want to see if the passwords are showing up. If they are the conversion worked. If you see nothing or a garbled mess it did not work and you made a mistake during this whole process.

If things went well backup and delete the conversion file below.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

You do not need it anymore.

Once you are positive every thing is running smoothly and everyone's passwords are ok you can go in and delete the "Old_Password" field as well.



If things didnt go well.. try again from scratch and go slowly.
If they still dont go well get ahold of us for help.

We are here to help, but if you really want us to we can be hired to do the conversion.

I have an asp page that includes other asp pages via an include.  for example:

snippet code: file name: collaboration.asp

 <table bgcolor="#bed1e4" border="0" cellspacing="0" cellpadding="10" marginwidth="0" marginheight="0" leftmargin="0" topmargin="0"> 
    <tr>
    <td>     
     <!--#include file="../../../filetransfer/directory_listing2.asp" -->
    <BR><BR>
     <!--#include file="../../../filetransfer/upload.asp" -->
    </td></tr>
   </table>

I can add the code below to collaboration.asp and it seems to work,but I cant seem to figure out how to protect the other files such as upload.asp at the same time. -- can you help?  - Note: as soon as I add the code below (and adjust the path) - I cant bring up the page.

This is the protection code I am using.

<!--#INCLUDE FILE="../../../../aspprotect/check_user_inc.asp"-->

Shirely

Cool.

Well I'm in the middle of uploading the txt file and it's about half way done and sitting there...so I'm keeping my fingers crossed.