Sorry, should have added,  if i change the connection string, i can also get this...

[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

that really does not make any sense...

I dont know what else to tell you as this really shouldn't be anything too difficult to sort out...

redirection based on criteria is not something aspprotect does by default... I try to help a bit... I've shown everyone how to do it in this thread...I know plenty of people doing it... I've done it myself... I know it works

let me ask you this... are you using ASPProtect 6 with the Option Pack ?
I assume you must be or you would not have the Groups feature ?
And you asked this question in the ASPProtect 6 section.

but then maybe your using 7.. I do not know

this should all work the same either way

I appreciate the offer to beta test... but its really more a matter of me getting it ready..

I have a lot done.. but a lot of things are hard coded to only work on my machine and some things have not been sorted out. Giving it to someone else to test would be a waste of time at this point as I they probably couldn’t even run it.

Lately the reason this project has fallen behind has all to do with my main webserver where I collocate.

1st it got compromised (we think by certain competitors who are always up to no good)... then windows 2003 server which I decided to go with on the new server gave me random problems... then the Cisco hardware firewall was acting up and making the sites run slow....then SQL server attacks on port 1433 from Korea when I took the firewall down....and as of the last few days I think the server just needs a new power supply. I swear for the last 2 months I have spent more time administrating my servers than working on code. Yesterday it was locking up every 30 minutes. There have been a lot of days like that and it takes up all my time until I get it situated.  Especially since its over 100 miles to the collocation center. The APC unit I installed that allows me to remotely cut the power to hard reboot is a life saver.

Fun... I tell ya... and expensive.. (hardware, software, lost sales, and time) I am pretty much completely broke at the moment. It has been a very expensive few months.

But I like running my own servers... I run dns servers, email servers, sql servers, web servers.. I do it all. It's keeps me in touch with the latest software/hardware. Regardless , my servers ran well for years and they will again.


anyway.. hopefully I can actually get a new version of the photo gallery out before the month is over. It will probably be the last classic asp version. The version after that will most likely be ASP.net.

Yea.. that error is totally because the asp pages are looking for fields in the database that are not there.. and causing a nasty loop.

if using the option pack you must go over the directions very carefully...
Make sure everything works step by step..

After upgrading to option pack code you either need to upgrade the database from the base system or use the newer database provided with the option pack.

Then.. you want to test every function of the groups.. if pages act slow and seem odd... especially the groups page and edit users page..
Then your not using a valid database. Either you didnt upgrade the old one, are not using the new one, or your connecting to an older verison by accident and not realizing it.

That's pretty much it...

More Upgrade Info

To upgrade an existing ASPBanner system please follow these steps.

Back up your old system completely before starting.

Install the new system per the installation instructions that came with it.

Once it is running simply use your old ASPBanner database with the new system.

You may also want to keep your banner images folder from before in the same location so your existing banners still link to valid image urls because the new system stores banner images in a new location.

Since the config table in the database is no longer used you will need to go to the settings screen of aspbanner again and configure things. The config table in your old database can be deleted or left alone. It won't be used anymore so it does not matter either way.

That is all there is to it. If you have any issues please ask in the forums and we will help you out.

Hi Chris,

I have a small problem, I have installed asp photo gallery pro on a hosted site, and after eventually getting them to modify permissions on directories it is essentially working, except that it won't delete pictures from an album. If I delete an album the pictures are left in the pictures directory, but the album is no longer displayed. If I then make a new album it is labelled incrementally... ie I had one album "album_ID_1", deleted it created a new album it is labelled "album_ID_2". I would have thought that the new album would be called "album_ID_1" ie taking the place of the deleted one. It seems to me that the delete album function isn't fully working either. My hosting comppany swears that the permissions on the pictures directory are set to full access for everybody. What have I done wrong?

Thank you

Nigel

You should read my article on server side includes… the path to the include file must of course be adjusted depending on where in your web you are.
http://www.powerasp.com/content/code-snippets/includes.asp

You will also notice if you look at the provided example pages that the include paths have been adjusted to make sense.

If it is 2 directories down it should probably look different..

example:)   "../../checkuser_inc.asp"

It’s weird that if you are not getting an error because if the path to the server side include is wrong you should get a nasty server error.

Also..

The ASPProtect system and any pages it protects must also be part of the same Application in IIS. It’s the nature of forms based authentication. Do a google search if you are not sure what an application is in IIS.

Lasty…. If you are logged in at the time

Whether your current session at the site is still active… or you have the cookie set to remember you.

Well, nothing will happen… cause your already logged in and you will just see the page as normal.

Perhaps things are working and you just don’t understand that part ?

You need to go to the log off page.. log off… then close all instances of the web browser windows..

Then come back to the site… then see if it prompts you to log in.

How can I make so it goes to certain webpages if user enters valid username and password??

I suppose user enters its information on check_user_inc.asp page, and username and password are stored on SQL database.

Thanks

Microsoft VBScript compilation error '800a0411'

Name redefined

/aspprotect/config_inc.asp, line 15

Dim  Address_Required,CDONTS_Installed,City_Required,Registration _Type,VerifyURL,Log_Off_Page
----^

Can ASPClassifieds display the ads by city?

I have a web directory that lists websites and companies by city.  Is it possible to have specific ads shown to the user depending on what city they click on?  For example, only ads in New York would be shown to users that have already clicked on that city in my directory.

thanks,

thanks... a review at aspin is always appretiated ...no one ever seems to do a review and they help me out a lot.. the aspprotect admin area header has a link

thanks...

I really do not know to tell you the truth. I'll do some research.

The script only allows .jpg, .jpeg, and .gif extensions.

If someone uploads a file called... "filename.vbs.jpeg" with bad vbscript in it I seriously doubt anything can happen because of it because of the extension.

But I really do not know.

It has never happened to any sites I have or know of.

If things are not perfect there will be no log files and no errors.. it can only be one of these things really
http://support.cjwsoft.com/code/moreinfo313-2.htm

You may also want to make your the filesystem on the server is working and not disabled by norton script blocking or anything random like that. Testing the filesystem object is best done by writing a simple text file to a folder. Plenty of examples of doing that can be found at www.aspin.com

Recent activity is temporary and admin activity in the admin area is not tracked. If your application in IIS has reset or there has been no activity in the users area or in pages you protected there will be nothing there. The busier your site the more chance something will be there. For example usually our online demo has something there except right after 4am when my server does an iisreset.

a. Sorry for the missunderstanding

b . Im running XP pro and done what was explained

c. The iis stops responding - Till I make iisrest

thanks

Ran

I have a solution for asp already but thanks anyway. Is there a good book or other learning tool I can purchase that you might know about? I would know where to start about how create a timed subscription in .NET.

Version 8.1 can work with MySQL
http://www.aspbanner.com/aspbanunlimited_v8.asp
It is just not supported at all.

The standard version can not work with MySQL.
There were a lot of changes to make the new version work with it and I really only did ift because I have a couple friends with busy sites that could only use MySQL.

It sounds like your site is way too busy for using an access database as you mentioned.

ok, I just sent you a private message with download information.

replace you existing

"check_user_inc.asp"

"admin/check_admin_inc.asp"

"admin/email_user.asp"

with the new versions in the download

Do some testing to make sure that HANNAH password works ok for you.

Hopefully this cures the issue...
If it works ok for you for a while I will offer the fixes to everyone and start using this code from now on

BTW:
"admin/email_user.asp" had an unrelated bug in it that only happened if its error handling got triggered... it was posting back to the wrong page when that happened and causing an error

The redirection feature isn't working as I exected.

If I clear a user's redirection_URL, they can navigate to any protected page on my website as expected.

However, if I set the user's redirection_URL to a protected page, they cannot login. More specifically, their browser just keeps displaying the login form while the browser's progress bar just increments ad infinitum.

If I set the user's redirection_URL to a NON-protected page, the user is directed to that non-protected page, but if they then try to navigate to a protected page, they are redirected back to the redirection_URL.

Is this the way the redirection feature is supposed to work?

My application requires that a user is directed to a protected page and from there, they can navigate to any page that they are allowed to go to.

What can I do?

I'm using the groups protect feature on my pages. None of them seem to close the session after clicking 'logoff'. I can tell because if I hit the back button and return to the group-protected page, hit 'refresh', the page refreshes, I'm not asked to log in again.

On the other hand, when I open a page that's protected by an access level and click 'logoff' (uses same logoff asp file to logoff), it seems to work fine - if I go back a page and refresh, it asks me to log in.

Just wondering - is anybody else having problems like this? Maybe I screwed something up in the few adjustments I made a while back. Any idea what it might be?

did you fix it because I see all the pictures just fine ?

http://mcintoshcounty.org/real_estate/view_item.asp?Ad_ID=1

Terribly sorry, but we are not software-technical.  So can you please tell us exactly which folder the database would be in.

Thanks in advance.

Hello,

I have ASPprotect 7 installed on my remote server.  I am able to go to the examples/default.asp page and login in without any difficulties.  If I copy the code from that page and paste it in a new page called the same thing but in a different folder, I get this error;  (Keep in mind that this is essentially the same exact page in a different location of the website)

Error Type:
Active Server Pages, ASP 0126 (0x80004005)
The include file '../../check_user_inc.asp' was not found.
/aspprotect/Pages/default.asp, line 3

I get the same error if I paste the "protection code" I have generated into the top of a current (.asp) page in my site.

Basically, the only pages that work are the ones that came with the program as examples.  Thats great, but now I need to make it work for my pages.  Any thoughts?

Hi Chris:

Is there a way I can include the username and password in the URL of a protected page to gain access to a that page without going through the log-in page?

I'm not quite sure what the syntax would be in the URL.

Warren

ok, well as far as what else to try I already told you..

you need to manually compare all those field settings with the sql script and make sure they all got set correctly...

you also need to tell me what email/name you ordered the application under... before I will continue this support with you.. at this point I don't know if you purchased the application or if you are using the unsupported lite version

Not sure because of the nature of the javascript method

for starters tighten up the html around the banner call

change

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<!------- ASPBanner Ad code ------------->
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >

</td>

to

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >
</td>

If that doesn't help I would suggest using the ASP 3.0 version of ASPBanner. It can serve banners to a any type of page extension and it runs just as well as the .NET version. There is a new iframe method for calling banners that you can try instead of the javascript. The iframe method is explained in the ASPBanner Unlimited section of the forum.

Yes, that was it! I had not created the banner for that zone yet. Once I did it came up fine. Do I win the Bonehead of the Year award?

I am just implementing the product, and I deleted the included zones instead of renaming them. That is why it is up to 6. I am migrating banners from my current system before I implement the code onto my pages.

If I may, I'd like to ask another question. I use rotation on all pages of my site except for the home page, where the banners are all smaller and static - an advertiser can expect their banner to always be in the same spot on the page.

I am currently hard coding this via html, but then I do not have the ability to collect stats on home page banner clicks, so I want to use ASPBanner. My question is, can I do this without creating a seperate zone for each banner? In other words, is there a way to modify the html code (that works just fine) so that in addition to indicating the zone, it can indicate the specific banner I want to appear? I would then paste the code in each cell of the table, and alter the banner #. If I do this with just the zone, I expect that the page will randomize the position of each banner across the page. You can see what I'm talking about by clicking here: http://www.PoconoCommuter.com/

Thanks for your help!

Hi

I downloaded the .chm format installation documentation but when I open it I get the index but can't see any of the pages so am a bit stuck.

i've got a client who has handed me a 151 character banner URL, and i see that the database is designed to take 150 characters. i took the obvious step of just increasing the size of that text field in the database, but i still get this error when i try to enter the URL in the proper form field:

Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.

/banners/aspbanner/save_banner.asp, line 200

now, line 200 is just this:

If Banner_Link_URL = "" THEN
 CmdEditBanner.Fields("Banner_Link_URL") = NULL
Else
 CmdEditBanner.Fields("Banner_Link_URL") = Banner_Link_URL
End If

which tells me that something is blocking the assignment of that long value to that field, even though i believed i had extended the length of that field in the source database.

where else might i look?