I am brought to a logon page in which I cannot access the page.  This must be due to the check_user_inc.asp include.  Without the include I get a blank page.

Using "Email Authentication" as a registration option you cannot do that. There is no possible way I know of to have a delay on the authentication email like that. Also that method is not intended to involve any sort of manual registration like what you are doing.

Because you want to review people manually you need to change to registration process to "manual" and then send the email out manually from the users screen after making a user active.

Weird

Did you see this thread. It shows how to set up the project in Visual Studio in detail.

http://support.cjwsoft.com/code/moreinfo85-1.htm

you have to check the session variables for groups a little differently.. info on that is here

http://support.cjwsoft.com/code/moreinfo198-1.htm

All fixed and working

Thanks

"save_pic_desc.asp"

in both the admin and users area needs to be edited

You'll see something like this...

If Len(Image_Description) > 250  Then

just change 250 to something higher.. I wouldn't go much over 500 though as it may cause problems.. I am really not sure.. Changing it higher is done at your own risk.

in Control_pic.asp is there way to wrap the description field so that it doesn't go outside the table.

Thanks

it is not uncommon for folder permissions to be lost or changed on a server.. a lot of things can cause it

if it was working and now you can not edit or write new data to the database it is most likely permissions

I would triple check permissions... see my articles if there is any doubt on how permissions are set

http://support.cjwsoft.com/code/moreinfo136-1.htm

http://support.cjwsoft.com/code/moreinfo56-1.htm

I am getting closer.

This error actually does not have anything to do with the forgotten password feature or your database.

It has to do with the settings you chose for emailing.

it relates to aspmail and it not liking the remotehost you used, or something like that.... etc etc

One is for paypal subscriptions (recurring billing) and the other is for single payments

http://support.cjwsoft.com/forum/forum_posts.asp?TID=185& ; ; ;PN=1

http://support.cjwsoft.com/forum/forum_posts.asp?TID=186& ; ; ;PN=1

You can delete any of the 3rd party payment directories you are not using including the the 2checkout one... (all those folders really are is a copy of the users folder specially modified to handle a certain payment processor)

Just Don't delete the "users" folder though as there are things you do there that you can not do anywhere else..  quite a few things..  editing existing account info, looking up passwords... etc etc

Different Versions of the Access Database

Below is a zip file with many alternate versions of the Access Database provided to help with installation and general usage.

2005-02-20_155310_ASPProtect_Database_Versions.zip

ASPProtect.mdb is saved as an Access97 database (password "temp")
ASPProtect_access2000.mdb is saved as and Access 2000 database (password "temp")
ASPProtect_access2000.mdb is saved as and Access 2002-2003 database (password "temp")
ASPProtect_access2002_no_password.mdb is saved as and Access 2002-2003 database with no password set on it

Try to use the newest version as server odbc drivers sometimes have to use the newest version for everything to work correctly. No password version is provided because sometimes there are issues connecting to a database with a password set on it.

Default username for access databases is of course "admin" but you really dont use that except in the data connection information.

Now that I really think about it.. instead of logging that info to a text file and worrying about folder permissions you could probably just save the post info into an application variable during the paypal ipn.asp post like so

For Each Item In Request.Form
formdata = formdata & vbCrLf & Item & "=" & Request.Form(Item) & vbCrLf
Next

Application("PayPalPost") = formdata & " - " & NOW


then anytime you wanted to see if that info was there or when it happened you could make a simple asp page in your site to display the results like so

<%
Response.Write "(" & Application("PayPalPost") & ")"
%>

My Admin user got corupted, and I need to reset the password and user, what is the defualt password for this database, as I do not think I have changes this (hopefully) as of yet.

Regards,

Paul

LOL

I downloaded the skins, ftp'd them to the skins folder and can see them in the list of available skins. No matter which one I try to apply it keeps solid_color_black.

Al

The stat not show when  impression over  xxxxxx

I use  aspbanner v8.1   MS SQL version

Total Impressions	83523
Total Clicks	7
Total Clickthru	.0%

Microsoft VBScript runtime error '800a0006'

Overflow: 'CInt'

/aspbanner/stats_window_admin.asp, line 257

Or at least I think so.  I have been trying to get this software to work so I can see if it meets our needs for an upgrade purchare. Here is my error.

Microsoft JET Database Engine error '80040e10'

No value given for one or more required parameters.

/aspprotect/scripts/populate_config_variables_inc.asp, line 15

My provider says that the problem is NOT on there end, that it is a problem with the code.  I think that it is a database connection problem.  Can you please help.  Below is my connection string based on what the setup page directed me to do:

ConnectionString = "data source=\\NAWINFS03\home\users\web\b1347\rh.957theride\asppro tect\data\database\ASPProtect_access2002.mdb; Provider=Microsoft.Jet.OLEDB.4.0;Jet OLEDB:Database Password=temp"

When I first set up the program I got this error:

Provider error '8000ffff'
Catastrophic failure
/aspprotect/scripts/populate_config_variables_inc.asp, line 11

Once again, the looked into it and said the permissions were fine and that the code was most likely bad.  But then the errror changed to the one that I first listed.  Which is the one I am currently getting. 

BTW here is the page address

http://www.957theride.com/aspprotect/password_admin/get_me_i n.asp

Thank you!

Just wanted to say how much I like the program! I hunted for days and finally purchased a Perl based product. After several days of goofing with it I gave up. ASPPhoto worked right on first install!!!!

Way to go!

yes, usernames and passwords are both case sensitive. It increases security.

Hi,

I did some layout customizing on the register page on my site. ( http://www.lonestaricon.com/aspprotect/paypal_sub_signup/reg ister.asp)

Now when I tried to register, it seems like it goes to the next page, but it is blank.
( http://www.lonestaricon.com/aspprotect/paypal_sub_signup/add _new_account.asp)

If I log in under administration, it shows that I have registered. I can't seem to figure out what part of the code is wrong, so that the new account page will not load.

I'd would greatly appreciate any help with this.

Thanks,

Allison

ConnectionString = "DBQ=C:\TradersReportsCom\aspprotect\data\database\ASPProtec t_access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

I have already set the folder permissions as indicated in the documentation.

is that lindsey lohan and her fake boobs as ur avatar?

I am installing IIS and all of its glory on the other computer now... gotta love remote desktop (the pc is at work  )

Hello,

I dont know exactly how you go about that and it would really depend on a lot of things like when the ad started and how yu wanted t handle that. it would involve custom coding though, not a change in the database.

There are 8 Access Levels by default.. they work like this.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=166& ; ; ;PN=1

Access Levels exist in ASPProtect Version 7 for backward compatibilty for customers using previous versions.

Truth is Groups are the replacement for Access Levels and they are much more powerful and flexible. You can also make as many of them as you want in the admin area.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=167& ; ; ;PN=1

On a side note:
We also coded ASPProtect Version 7 so there could technically be as many access levels as you wanted. It's not supported but if you really wanted more Access Levels you would carefully add more Access Levels to the drop down choices when you edit a user. "edit.asp"

I don't know why anyone would want to use Access Levels however when they can use Groups.

sometimes those emails take a bit... all depend on wht you are using to send them and whether a pickup directory is involved

as for the other I do not know.. PM me the site details I can look

if it is a 2003 server parent paths must of course be enabled.. its a requirement of aspclassifieds

I uploaded the files designed for an aspprotect folder at the root of my site (mysite.com/aspprotect) and went to mysite.com/password_admin/get_me_in.asp and receive this error:

Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0xf54 Thread 0x908 DBC 0x90c41dc Jet'.

/aspprotect/scripts/populate_config_variables_inc.asp, line 11

I am assuming my host has still not set rights properly and that is why I receive this error. Am I correct?

 I will definitely recommend hosting company you suggested for our businees site.

no, its part the concurrent login checking system.

currently when that is on logging off does not come into play..
(pretty much because it is such a complex system I wasnt able to make it quite that intelligent this time around)

when concurrent login checking is enabled the only way to log in again at another system with the same username and with a different IP is to wait till that time period is over

sorry

as you may recall it was rush feature at the last moment before I got version 7 finished. Hopefully I can improve on the feature in the next version but I dont really see it as being a big issue at the moment. Sometimes when you want maximum security you have to make some tradeoffs and that is why the feature is optional.

If you want to have a login form on a non protected page that posts
to a protected ".asp" page use code like this.

Change the action of the form to the page you want them to log into.
Make sure to page you send them to is protected by the "check_user_inc.asp" file.

<center>
  <table border="0" width="400" height="200" bgcolor="#000000">
    <tr>
      <td bgcolor="#F4F4F4">
        <form method="POST" action="memberarea.asp">
          <input type="hidden" name="Status" value="Checkem">
          <p align="center"><font face="Arial">ASPProtect Login</font></p>
          <div align="center">
             <center>
             <table border="0" bgcolor="#C0C0C0">
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Username</font></small></stro ng></td>
                 <td><input type="text" name="Username" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Password</font></small></stro ng></td>
                 <td><input type="Password" name="Password" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB" colspan="2"><font face="Verdana, Arial, Helvetica" size="-1"><input type="checkbox" name="KEEPMESIGNEDIN" value="True">Keep
                   me signed in on this computer unless I log off.</font></td>
               </tr>
             </table>
             </center>
          </div>
          <div align="center">
             <center>
             <p>&nbsp;<input type="submit" value="Login"></p>
             </center>
          </div>
       
        </form>
      </td>
    </tr>
  </table>
  </center>