ahhh ok.. I was going to wait till morning to answer this one..

glad ya figured it out

Well, thats not normal.
(it should work just like our online demo does)

Do you have everything turned on in the settings ?

Uploading needs to be enabled and you also have to pick a valid upload method.

Hi,

I did some layout customizing on the register page on my site. ( http://www.lonestaricon.com/aspprotect/paypal_sub_signup/reg ister.asp)

Now when I tried to register, it seems like it goes to the next page, but it is blank.
( http://www.lonestaricon.com/aspprotect/paypal_sub_signup/add _new_account.asp)

If I log in under administration, it shows that I have registered. I can't seem to figure out what part of the code is wrong, so that the new account page will not load.

I'd would greatly appreciate any help with this.

Thanks,

Allison

ya,

any variation of a site url is going to have its own set of application and session variables.. soy you have to be consistant with your navigation links

example (for anyone that comes across this thread)

http://www.examplesite.com/somepage.asp

is going to have a different set of application and session variables then

http://examplesite.com/somepage.asp

even though they are basically the same page

yes, like macnap says.... you have to protect your ".asp" pages the way the directions tell you to...

and like in the "example" protected pages we provide

or they will not be protected and nothing will happen as far as ASPProtect goes

I guess I just didnt understand what you were talking about

If you want to have a login form on a non protected page that posts
to a protected ".asp" page use code like this.

Change the action of the form to the page you want them to log into.
Make sure to page you send them to is protected by the "check_user_inc.asp" file.

<center>
  <table border="0" width="400" height="200" bgcolor="#000000">
    <tr>
      <td bgcolor="#F4F4F4">
        <form method="POST" action="memberarea.asp">
          <input type="hidden" name="Status" value="Checkem">
          <p align="center"><font face="Arial">ASPProtect Login</font></p>
          <div align="center">
             <center>
             <table border="0" bgcolor="#C0C0C0">
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Username</font></small></stro ng></td>
                 <td><input type="text" name="Username" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Password</font></small></stro ng></td>
                 <td><input type="Password" name="Password" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB" colspan="2"><font face="Verdana, Arial, Helvetica" size="-1"><input type="checkbox" name="KEEPMESIGNEDIN" value="True">Keep
                   me signed in on this computer unless I log off.</font></td>
               </tr>
             </table>
             </center>
          </div>
          <div align="center">
             <center>
             <p>&nbsp;<input type="submit" value="Login"></p>
             </center>
          </div>
       
        </form>
      </td>
    </tr>
  </table>
  </center>

the sql databse is the same.. the sql script is the same for any version

as the site says they are essentially the same app with very minor changes... if you are trying to share the same sql database with both it's not gonna happen because the table names are the same

truthfully:
that app runs nealry as well with msaccess as it does with sql so I wouldnt get too excited about running it withe sql. You will not see any benefits unless you have a ton of simultaneus (sp) users.

OK.. I went with using ASPEMAIL.  The above did not seem to work.  No worries though, where there is a will (with options) there is a way.

I am also getting the "Unspecified Error" message.  I just transferred my site to IIS 5.0 and I get that error now.  However it does not happen everytime.  I can click on a page and it opens fine and then I hit refresh in the browser and I get the "Unspecified Error" message.  What could be causing this?

If you have an album with more than 96 pictures, the spacing in the tables can become incorrect, with pictures touching each other. (This program is not designed to handle more than 96 pictures due to server speed, but it can handle more than 96 with minor changes to the code.) Also, after 96 pictures, the pictures will not have 6 on a line, but rather 6 on a line up to 96 pictures and then the rest of the pictures on one line next to each other extending to the right of the screen endlessly. To fix this, I simply edited the ASP code using the following loop. It can be a perminent fix, because I used the maxpicsperalbum variable to define the spacing.

<%
Dim SixInterval
For SixInterval = 2 to maxpicsperalbum
 SixInterval = SixInterval + 5
%>
 <% If PicIndex = SixInterval THEN %> 
  </tr>
  <tr>
 <% End If %>
<% Next %>

Then, the following code must be commented out:

<% If PicIndex = 6 or PicIndex = 12 or PicIndex = 18 or PicIndex = 24 or PicIndex = 30 or PicIndex = 36 or PicIndex = 42 or PicIndex = 48 or PicIndex = 54 or PicIndex = 60 or PicIndex = 66 or PicIndex = 72 or PicIndex = 78 or PicIndex = 84 or PicIndex = 90 or PicIndex = 96 Then %>
 </tr>
 <tr>
<% End If %>

This code can be found in scripts/view_album_style*STYLE NUMBER*_inc.asp . (STYLE NUMBER depending on which style you are using (found in config file))

This change in code will enter a new table row after each 6th picture. You can have more or less than 6 pictures per line depending on the width of your files and preference by changing  changing the number 5 in this line of code: SixInterval = SixInterval + 5

If you have any questions, JPortnoy@Checkernet.com

so use the connection string the readme.txt in the sql installation folder file tells you to... it has the correct username.. I just posted that info above

or change the username in the connection string so its rigfht

or go into sql and give any user you want access to the database and use them

Any connection strings that come in the datacon_inc.asp file the way it ships are examples. We fully expect people to edit them.

Also.. the SQL scripts primarly goal is give you a properly set up database with correct files and table settings. Users and permissions often need a little extra attention from the installer as that part doesn't always get set right by the scripts It really all depends on what sql user you are when you execute the scripts. Many times the user someone logs in with doesn't have permission to make users and set permissions.

thats a new one... I need some sort of error to go on..

No error ever ? It must eventually show something ?

I'm using ASPimage and have the maximum width set to 320 in the settings.  Also using SAFileUP ver. 4.0.

Files upload okay, and the script displays a confirmation that the image was resized to 320, but the actual image uploaded is displaying full size rather than reduced to 320.

Also, the thumbnails are not displayed in the Picture Manager. Would indicated ASPImage is not working or the script is not communicating with it.

Suggestions?

I am getting closer.

This error actually does not have anything to do with the forgotten password feature or your database.

It has to do with the settings you chose for emailing.

it relates to aspmail and it not liking the remotehost you used, or something like that.... etc etc

I run F-secure on my laptop which has the anti-virus and firewall modules, and the servers aren't running anything like that.

also.. the log out page shouldnt really need this
but you can try adding this to it where all the other ones are set to nothing..

<% Session("Groups") = "" %>

Hi all

User activity screen shows history of logged-in users.

Is it possible to view only those users that are currently logged in ? not the all users that have logged in previously

thanks in advance

I installed the ASPProtect.NET project no problem.  I am using VS.NET 2003 on Windows XP SP2 (and fully patched).  I am able to build the project successfully, however I cannot debug the project.  I get an error "Unable to start debugging on the web server. The project is not configured to be debugged."  The web app runs fine just browsing to it.

I know this is an isolated problem particular to this project.  I have MANY other .NET projects that I can debug without any problems.  I have tried going into IIS and turn on the debugging for server-side script debugging and making sure my IIS application setting were configured correctly.

Can anyone shed any light on this at all?  Christopher, is there any reason I should not be able to debug this?  (i.e. the aspprotectlicense.dll)

Thanks,

K

if that account isnt there thats normal because if it doesn't have any permissions for that folder so it wouldnt be listed

you simply dig into the menus a liitle deaper and find it then add it.

The default database password is "temp"

This is noted in the docs. You can also see the current password by looking at your connection string.

That bit about zones makes perfect sense and seems surpassingly simple for me to integrate due to our categories and page contents being based on the same if/then functionality.

Regarding the user, I guess you mean that I could simply recreate a limited admin interface for users based on the interface you have included for me, is that correct? I realize how subjective the question is, but do you think that this would be a bad idea?

I'm leaning toward your software here. I have a budget that could easily cover a variety of programs, but the UI for advertisers at banmanpro, for example, seems far too complicated for my users. Also, banmanpro doesn't have supporting compatible softare I am interested in, such as your classifieds software.

I guess I am trying to buy a good shell from which I can do my own customization and coding, and into which I can integrate future additions such as your classified ads. Does this seem like the right place to be?

Thanks much for your time!

Is there anyway to limit the number of Albums each user can make?