Now that I think about you may very well be able to use the existing login_form_inc.asp page

the header and footer files for the users area may be ok as well.

probably the smart thing to do is try your old ones and compare them to the new and see if everything you need is there. If not add it by looking at the source html and comparing.

All other files should definetly be replaced with the new.

Is there a simple way to upgrade from 7.x Lite to 7.x Full?  I was testing out the software and I just purchased it.  I have made some look and feel changes to the lite version (ie: login page), but no look and feel changes to the admin section.  Is there certian files that I can add to have the full version without shorting myself features or functionalbity? 

Thanks

Hi,

Ok, well... you have a lot of stuff going on there.

More importantly than that.. you cant even log into the admin area using the admin account. There is something majorly wrong with the installation.

I also notice you havent even saved any path settings in the settings page of the admin area. I am looking that over now and filling in the missing info. That information needs to be populated.

Hello..

I actually noticed something was up with your install earlier...
(I saw you in my log files when you clicked to cjwoft from the docs)

I need more info... like what uploading method your using.. what image resizing component, what widths yoru resizing things to... etc

have you tried it while telling it to delete the pics and also while not telling it not to delete them from the import folder

I might have to take a look tommoro as well to really figure it if that is ok

I have to go the bar to meet some friends so I wont be of much more help tonight :)

I been working steady all week and need a few.

CJW

When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner. 

The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though) 

Really the best way to show it is with an example as seen below.

Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.

All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser, 

The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser. 

In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.



On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.

http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html

This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code. 

Thanks for the info.  We'll do as you suggest.

NPA

I have connected to countless DB's using my own applications written in dreamweaver and have tested them on my own server and also my web facing one.  BUT this seems to be different.  no matter what I try I still get this error.

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x440 Thread 0x6b0 DBC 0x1f995bc Jet'.

On both a windows 2000 server and also a windows 2003 server. Also using both DSN and DSN less connection and oledb.

Any help would be greatly apprectiated.

Thanks

If you can would you do it for a price as a mod or will this be added to the new version.

Nope,

No changes to any scripts - just a response.write added to Email_Password.asp to print out the SQL.

Sure - here's the address.

www.omegaphibeta.net/aspprotect/users/Email_Password.asp

-Toni

P.S.  E-mail address to look for is serena_5@hotmail.com

This is what it says in that thread I pointed you to

This zip file contains 3 sets of alternate files depending on your situation. You simply replace your existing aspprotect v7.x files with these new ones.

I really dont see what is confusing about it. I think I explained it all in detail in that thread.

My site is composed of mostly asp based pages with some javascripting thrown in, but a fair amount is strictly html and javascripting. Currently I am using the javascript banner method throughout the site.

You have mentioned in the past that several other methods might be a better option for asp pages.

Examples would be:  XML Parser Method or asphttp method.

I was wondering if it is possible to use the javascript method on my non-asp pages and maybe the asphttp method on the asp pages and all in the same Zone?

Or, is it possible to use the asphttp method on all pages, whether they are asp or not?

I'm just trying to figure out what is the most efficient way to use the banner system.

Or maybe should I just keep it all javascript method?

Any helpful feedback would be appreciated!

Thanks.

-john

sorry your having so much trouble. A good host is a must.

Yes, that is most likely permissions related.
http://support.cjwsoft.com/code/moreinfo27-1.htm

You may want to read over my article on how permissions are set. It will give you a very good understanding of the process and may help yo when dealing with your hosting company.

http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

there is also an xp pro version of the article for people doing locl development and running iis on their xp box
http://www.powerasp.com/content/new/windows_xp_pro_and_permi ssions.asp

I really need more info on what you have going on?

This can sometimes be cause by a slow server / bad data connection.

Sometimes caused when someone is using the option pack but did not make the proper changes to the database.

Sometimes caused when a user adds users the database on his own and does some "incorrect" things..

The more details you can provide the better. Think of anything and everything and describe it.

SQL or MSACCESS... version of either
Server OS
Using Option Pack or not
Did you have your host set permissions...

etc etc etc

This may be an old question ??? If it is please point me to the post or documentation where I can find the answer please.

When creating protected pages I am using the following to protect them:

<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="/aspprotect/check_user_inc.asp"-->

But that is not working. I get the following error when I try to access the members logon page in the directory that I wish to add the pages to:

Active Server Pages error 'ASP 0130'

Invalid File attribute

/filelocation/filename.asp, line 3

File attribute '/aspprotect/check_user_inc.asp' cannot start with forward slash or back slash.

However if I create the pages in the root of the AspProtect directory and use a link to the same page that exists in the AspProtect directory and the following include:

<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

The pages work fine.

I really do not want to put all of my protected pages in the root of the AspProtect directory.

 I would like to mix protected and unprotected pages throughout the site in order to #1 make it easier to administer. #2 keep the AspProtect directory solely for authentication. And, #3 keep any user authentication pages out of the AspProtect directory.

TIA

Hi Chris

After turing off the delayed stats feature the internal errors have stopped and it still serves banners, although I havent checked the logs yet. I will and post any errors.

I left my test page up last night at say 11pm serving 4 banners of different sizes rotating every 15 seconds, now at 9am the page is just displaying 1. If I refresh the page they all reappear.

Regards
Colin

Hi, I have not gotten anything from you about it.

click on the PM button below and send it that way through the forums.

Thanks

Hello,

I need to see if this is possible. I want to create a browsing system such that, the user selects a Province from a drop down list on the main page. Based the selection, the username of all the users in that province will be shown. Then the user can click on a specific username and his/her portfolio (photo album) will be displayed.

is this possible? If so, How can I do this, please help.

Thanks

Sean

No I didn't...

The one I tried is the hosted one at my provider which I gave you the link for.

Thanks very much.  I will get that one and it may be much easier if I need to get into the Nitty Gritty of the database at some time.

Thanks

Well. fontpage publishing is evil. That you have found out.

Do not use it. It usually wont work right when running asp code locally and also at the server because of differences with the paths and virtual directory structure. etc etc etc

You can definetly use frontpage to connect to the web site live and drag and drop files into it/edit them... but the sooner you stop using the publishing feature the better off you will be.

OK.  If no return page is set, do they end up on a PayPal confirmation page and have to navigate back to my site by going Back or typing the web address?

Nick

Hi Chris,

Thanks for the answer. No, I am not using Paypal since these are employees and sales reps. I guess i'm on my own on this one. :)

Thanks
Sylvain

When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner. 

The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though) 

Really the best way to show it is with an example as seen below.

Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.

All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser, 

The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser. 

In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.



On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.

http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html

This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code. 

There was nothing wrong with the server configuration. It turned out that the problem was that I disabled the email notification of new user registrations that I continually receive. That appears to disable the authorization email to new users as well.

One other issue. It appears that AOL email addressee's are not getting the authorization email. Does AOL have any blocks to CDONT generated emails?

I am trying to protect and ASP page written in Javascript.  The first part of the page goes:

<%@LANGUAGE="JAVASCRIPT"%>
<!--#include file="../Connections/connWINGAP.asp" -->

When I insert the aspprotect code it looks like this:

<%@LANGUAGE="JAVASCRIPT"%>
<!--#INCLUDE VIRTUAL="/GIS/WCGIS/GISProtect/check_user_inc.asp"-->
<!--#include file="../Connections/connWINGAP.asp" -->

and I get this error: 

Microsoft JScript compilation error '800a03f7'

Unterminated string constant

/GIS/WCGIS/GISProtect/check_user_inc.asp, line 2

I think I understand that your code is written in VBscript and that is why it is not working.  If this is the case, how can I switch to VB to execute your stuff then switch back?

Thanks,

Jess

This is what "John Evans" of CJWSoft has to say on the matter...

"I think that’s pretty much impossible. If the server sees a .JPG or .JPEG extension why in the world would it go and try to read it or do anything with it.

I believe there may have been some issues with Outlook and Outlook express that made it look like a vbs script sent as an attachment was actually a JPG because someone found an exploit in those programs and it would appear as if double extension files were one thing when in fact they were not.

Having a real time virus scanner on the server (which any good host will) should also catch anything infected being built on the server drives as the file uploads. Always worked for me and I had a lot of people uploading ZIP files on winxptheme.com at one point. Many had viruses in them although I suspect it was totally innocent on the end users part. Some people didn’t even know they had a virus on their rig. 

Fact is anything is possible but I think chances of getting a virus or being hacked in some way from this sort of upload are really slim."

[QUOTE=cwilliams]actually, passwords can be up to 75 characters long in ASPProtect.
the only requirement when entered from a non admin user is that they are at least 4 characters long.

what does MSAccess have to do with this ? Are you trying to convert and old system or something? I noticed you created and "old password" field in there ? Is there something I do not know about as far as what you are trying to do?

Passwords in version 7 are encrypted so I hope you understand all of that and realize you can not enter or change passwords right from SQL server. Also if you import info you must handle that accordingly and convert the passwords to encrypted format. [/QUOTE]

First off, I haven't imported anything from MS Access.. The only reason I mentioned it is cuz I thought initially it worked with Access and not SQL server.

I am not converting nor entering any data manually into the db, nor have I changed anything in the way the registration is made (don't know where the "Old password" has come from? thought it was a function you made?)