Blog Entry: 3/25/2006 4:30:07 PM
ok, that is what you are suppose to do... not having that path info set can cause all sorts of trouble., Awesome -thanks - I'll give it a try ,
ok, Actually, your whole site is like that.
http://www.bones.myftpsite.net/rfamilystuff/
You should definetly fix that..
I can't help ya with it though. You'll have to figure it out.
I know ya can do it...
later
cwilliams38394.7738657407, Is this the full version 7.
Did you make any changes to the code ?
Is the User_ID field still an autonumber field in the Access database ?
I do not see how this could happen unless somehow the autonumber field setting for User_ID was changed in the database?
, yes, like it says it is expirimental
turn it off.. the banner system will run just as fast for the most part
or leave it on and an occasional user will see a permission denied error where a banner will be, I checked through the code and could not find anything as well.
However, I do think it may be related somehow to the code as I get the messages popping up in the error log only after I have edited a banner.
If there is nothing obvious, I may just set my error log to filter and automatically delete this type of error. Not something I prefer to do.
Thanks for the quick response.
Otherwise the program is working very well and I'm happy with it.
, Making progress. I have made the appropriate settings and now I have the option to upload. When I upload, I get the following message:
"Your upload did not succeed, most likely because your browser does not support Upload via this mechanism.
Your browser must support a standard called RFC 1867. Please check with your browser vendor for support of this standard"
I am using IE6 XP SP2. I also am using DUNDAS UPLOAD, ASPIMAGE.
I think I set permissions correctly bot not positive. I have given all auth to everyone for the database etc.
, If you want to have a login form on a non protected page that posts
to a protected ".asp" page use code like this.
Change the action of the form to the page you want them to log into.
Make sure the page you send them to is protected by the "check_user_inc.asp" file.
<center>
<table border="0" width="400" height="200" bgcolor="#000000">
<tr>
<td bgcolor="#F4F4F4">
<form method="POST" action="memberarea.asp">
<input type="hidden" name="Status" value="Checkem">
<p align="center"><font face="Arial">ASPProtect Login</font></p>
<div align="center">
<center>
<table border="0" bgcolor="#C0C0C0">
<tr>
<td bgcolor="#EBEBEB"><strong><small><font face="Arial">Username</font></small></stro ng></td>
<td><input type="text" name="Username" size="10"></td>
</tr>
<tr>
<td bgcolor="#EBEBEB"><strong><small><font face="Arial">Password</font></small></stro ng></td>
<td><input type="Password" name="Password" size="10"></td>
</tr>
<tr>
<td bgcolor="#EBEBEB" colspan="2"><font face="Verdana, Arial, Helvetica" size="-1"><input type="checkbox" name="KEEPMESIGNEDIN" value="True">Keep
me signed in on this computer unless I log off.</font></td>
</tr>
</table>
</center>
</div>
<div align="center">
<center>
<p> <input type="submit" value="Login"></p>
</center>
</div>
</form>
</td>
</tr>
</table>
</center>
cwilliams38411.453912037, As I already had directories in my web site root called 'images' and 'templates' I loaded the files into a sub directory called 'aspprotect' as suggested in the installation guide where it say 'either way it really doesn't matter'.
However, it does.
The scripts are often looking for a file which it can't find because the /aspprotect part of the path is missing. Example:
I can't find a way of editing all the scripts that need changing. I'm assuming it would be easier to change my site to avoid using subdirectories used by aspprotect and reinstalling from scratch straight into the root directory.
Anyone with any suggestions?
Many thanks
Ian
, do you have the smtp part of iis installed on your machine
cdonts needs that
then again I am not sure you can even use cdonts on a xp box without making some changes...
cdonts has kinds died out and as of windows 2000 basically got replaces by cdosys
, Thank you! I thought that is what had to be done, just didn't want to miss out on a short cut if there was one. Thanks again, also, just to show you what happens when a user creates a subscription this is the code. you can see in red where the subscrition is is set and also where the exp date is set to null
If txn_type = "subscr_signup" Then
Set ConnPasswords = Server.CreateObject("ADODB.Connection")
Set CmdEditUser = Server.CreateObject("ADODB.Recordset")
ConnPasswords.Open ConnectionString
SQL = "SELECT " & tbl_label_users & ".* FROM " & tbl_label_users & " WHERE (User_ID = " & User_ID & ")"
CmdEditUser.Open SQL, ConnPasswords, 1, 3
CmdEditUser.Fields("Active") = "1"
CmdEditUser.Fields("Validated") = "1"
CmdEditUser.Fields("PayPal_Subscriber_ID") = subscr_id
CmdEditUser.Fields("Notes") = "Successful PayPal Subscription Signup on " & Date
CmdEditUser.Fields("Expiration_Date") = Null
If Access_Level <> "" Then
CmdEditUser.Fields("Access_Level") = Access_Level
End If
If Groups <> "" Then
CmdEditUser.Fields("Groups") = Trim(Groups)
End If
CmdEditUser.Update
CmdEditUser.Close
Set CmdEditUser = Nothing
ConnPasswords.Close
Set ConnPasswords = Nothing
End If , sorry for the confusion. I completely forgot about that flag setup, and how different it is between the two databases., I am trying to import a file, and I get this error:
Microsoft VBScript compilation error '800a03f9'
Expected 'Then'
/aspprotect/password_admin/upload_post.asp, line 6
If Session("Admin") <> "True"
-----------------------------^
Any suggestions on how to fix it?
Thank you.
,
I pull that crap on myself once and a while... or my
favorite is leaving a bootable CD in the drive and then wondering why the heck
the OS doesn’t come back up. I pretty much promised myself back in 2002 that I
would never mess with anything minor after 10PM. For whatever reason I always
start messing around trying to "fix" something and end up sorry...
Granted if it’s an emergency I am all for it, but I get dresses in advance
anticipating the practically inevitable drive down to the datacenter.
Good luck with that, I am sure you will be much better off
in the long run.
, here is a thread that may help you if this is what you were getting at
http://support.cjwsoft.com/code/moreinfo389-1.htm
, Simply not possible, that feature is one of the most complicated things I have ever coded. I am very serious when I say that. There is simply no way to make it do that without spending like 80+ hours on the code and even then I do not know how it would work. There is some very slick stuff going on there and there is no simple way to change it like that. , I had some issues with passwords not working. I cleared them up by
going to the affected user and typing in the desired password manually
on the edit screen. Worked like a champ every time, and I haven't had
to do that for some time now.
, (FREE) Nov 23 2005 Update Files
If you purchased ASPProtect Version 7.x before Nov 23 2005 then you can download these Update Files.
(These are non-critical updates.. only update if you want the described changes below)
These updates do the following..
- Make the Tabs in the Admin area move up and down as you navigate around so they look more like tabs used in a file cabinet.
- Updates the import/export process so the tab delimited text files created now store the passwords in plain text instead of encrypted. I have been thinking about this one for a while now and I think it is better this way as it was confusing a lot of people. If can also kill the whole process if by chance the encrypted output of a password contains a line break of sorts. There is no way to deal with that scenario so this is way the import/export process is going to work from now on. This also means you should be VERY carfeful about leaving export files lying around as they will have the passwords in them.
- Updates the "expected_paths.asp" in the data folder because the paths it was generating had an extra "data/" in it.
- Updates the users page so it will not show the import/export link if you have not entered a path for the export files in the settings.
- Adds an Activity Tab if using the Activity Tracking features instead of the links it used to put on the users page that most people didn't see.
To install these just copy them in over the old files.
Now of course back up your existing files so can revert back if there is a problem or you do not like the changes. If you made any custom changes to any of your pages use your head and realize that copying these in over your existing files will overide any custom changes you made. (that is your business, I am just warning you)
2005-11-23_163025_ASPProtect_v7_11-23-2005_update.zip
, While my host says the permissions are now correct....its still trying to download the setup ASP file instead of executing it.
I really need to get this application working asap too. I noticed the purchasing page said that install came free.....so any help would reaallly be great.
re
, I just purchased the software and it looks great however, I have been fighting for 4 hours trying to get a protected page to do what it is supposed to.
I was trying the examples you provided and they worked fine, then I would use the code at the top of my pages with no luck.
When I installed the software, I used an FTP package as I have found lately that anything with a database gets all messed up when I publish with FP.
On a whim, I took the page I was publishing in FP and published the same page with my FTP program. It worked! What I can't figure out is what FP does to the files to screw them up so they won't function. Is there a setting in FP that I have to change to get it to work? The files look the same, but they are different sizes when I overwrite them with FTP.
Any ideas? I don't want to have to publish my entire site with FTP as it is a FP template site.
Thanks,
Dave
, Makes sense to me. I used the ASPProtect_access2002.mdb supplied.
(I am using 2003). Only added more names and other personal info
to it for test. Uploaded the amended db with FTP. This did not
restrict someone not listed in db from logging in.
Would each individuals' information need to be added to the code in
order to have it check the database first to find out if the person is
authorized to view?
Part of the problem is I dont know which ASP page or script links the
db to the rest of the web, or how one page relates or links to the
other.
Sometimes I wonder if problems I encounter originate with the server.
Thanks for patience.
, Could be a mod I guess - it would be nice to have an option on the admin settings page to lock down access of all pages and redirect to a specified "lockdown" page upon attempted login.
If I'm updating the large files on the server and someone attempts a download, they'll get a partial ZIP file or an error.
, if you are talking about IPN subscriptions and how they work paypal has detailed manauls on their site.. if you are talking about asp.net in general there are probably a lot of good books..
the reason I said look at the aspprotect 7 code is cause the applications and database are very similar and the same techniques will apply for the most part as far as how the ipn subscription posts from paypal talk to the database and what happens during the various post events.. etc etc etc , Personally, I really wouldnt worry about. Personal Client virus software like that is not really meant to run on servers anyway. That software is meant for client machines, not web servers.
Any Server designed virus product will not incorporate script blocking features because servers often need to run scripts when dealing with ASP, PHP, CFM, etc etc
That article I link to has more on all of that.
Turning that off is nothing to worry about. I been running IIS servers for 8 years. , like I said... you would have to modify the code
(and really I dont think it is possible, how could it be when images uploaded are of all shapes and sizes)
How are pictures of various shapes and size going to resized to a fixed width and height without distortion on either a horizontal or vertical level ? Uness the image uploaded matches the fixed thumbnail ratio you have set there is going to be distortion.
There is no component that is going to make it any easier. You are already using an image resizing component.
I give you two options the way the code ships.
fixed width and height for thumbnails
or
fixed width / dynamic height for thumbnails
The only other possible option would be
fixed height / dynamic width for thumbnails
and that you would have to code on your own because that option is not there
The last thing I will say is this. Sorry, but I do not support custimizations to the code. It's just not easy to explain. Its a lot of code work. Its a lot of time.
, ASPProtect Version 7
Expiry Notices go out to members who have recently renewed by subscription.
When an existing member from ASPProtect Version 6, with an expiry date, renews with SUBSCRIPTION in v7, the previous expiry date remains unchanged.
We assume the expiry date remains blank with NEW Subscriptions and that Paypal takes care of notifications.
But our notifications to the "about to expire" dating from v6 catches the "Renewed by subscrtiption" as well, as the date has nor been changed or removed, and this REALLY confuses our members.
Can this be resolved?
,
Flash files cannot track clicks unless you edit the original flash file to link to the aspbanner system redirect URL.. feeding it the correct ID of the banner.
When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner.
The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though)
Really the best way to show it is with an example as seen below.
Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.
All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser,
The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser.
In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.
On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.
http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html
This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code.
cwilliams38085.095150463, I'm all set - after thinking about your replies - i checked a bit more and changed the email component type -- thanks again for all your help.
, humm, I see your using the lite version which is technically not supported.
I know you were responding to an existing thread but I really would rather you have posted this in the ASPProtect Lite area or at least mentioned what version you are using. Usually there are big differences in the versions and it helps me help you if I know what is going on.
Regardless, the code for this feature is actually the same and I just tested a fresh install of the lite version and it stored that verify url perfectly and all worked as it should in the verification email.
All I can think of is that you can try manually editing the "users/add_new_account.asp" file.
This part
EmailBody = EmailBody & "New Registration.." & vbCrLf & vbCrLf & "Your registration still has to be validated." & vbCrLf & "Go to " & vbCrLf & VerifyURL & "?u=" & Server.URLEncode(Request("Username")) & "&v=" & ValidateEmailCode & vbCrLf & "to verify your registration." & vbCrLf & vbCrLf
Would need your verify URL hardcoded into it which would pretty much guarantee it would get put in the email.
EmailBody = EmailBody & "New Registration.." & vbCrLf & vbCrLf & "Your registration still has to be validated." & "http://localhost/aspprotectlite/users/v.asp" & "Go to " & vbCrLf & VerifyURL & "?u=" & Server.URLEncode(Request("Username")) & "&v=" & ValidateEmailCode & vbCrLf & "to verify your registration." & vbCrLf & vbCrLf
Of course change the url to be valid for your setup.
Still, the fact that this isn't working means there is something wrong with your installation. It would probably be a good idea to erase everything, do an iisreset, and re-install the application in a different directory... immediatly log and go to the settings page, carefully set everything and save it... then register as a new user and see what happens.
There is no reason that variable shouldn't get set. I mean I tested it just now with a fresh install of the version you are using and not only that... 1000's of people have been using that same code for over a year in the full version and no one has had this problem except the guy who started this thread who never populated the value.
My guess is still a problem with your "IIS application" for that web. It is not doing it's thing for some reason. When the settings page is saved and application variable gets set telling the config file to reload the variables as it doesn't do it every time to conserve resources.
If that isn't getting triggered and that variable isn't getting set who knows what else isn't getting set and it's not pratical going around hardcoding 15 important variables., Hello,
Again, enspecified error are not very helpful.
An error usually tells you at least a line number and page or something.
Please read this as it might help do tell me more.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=11& PN=1
As for only happening once in a while. It could be a lot of things.
Version being used (when did you purchase.. what name/email was it under and I can look) ?
What banner method being used?
Access or MSSQL ?
How busy the site is ?
Server Resources ?
cwilliams38414.6114930556, Hi, its just not something i can suppport as I do not support custmizations to the code epecially when dealing with an image component that is not supported by the application.
Sorry, its something you have to figure out. Bascially I would suggest looking at the existing asp image resizing code and using that as a guide.
Have you considered just buying a license of ASPImage and asking the host if they will install it after you purchase it. It sounds like it may save you a lot of time.
If you are ever looking for a good host for ASP. www.alentus.com is one of the best. There 9.95 plan gives you access to 3000.00 of commercial quaility asp components also which is nice.
, I use the group feature and would like to know if it is possible to change or delete members from a group in bulk. For example if I have 200 users registered for group 1 and 3 how could I delete all members from group 3 in one pass rather than editing 200 individual members?, How to bring up Banner Calling Code Generators
Simply go to the zones screen.
Select a Zone from the list.
Check the "Show Banner Code" option.
Click on "Display Banners in Selected Zone"
cwilliams38325.7399537037, do you want my help making the database with your import file ?, I just did a quick google search... found a ton of info on how to find the setting. Here is one...
These are directions for IIS6 but the process is similar for IIS4-5
- Click Start, click Administrative Tools, and then click Internet Information Services (IIS) Manager.
- Double-click your computer name in the left pane, and then double-click Web Sites.
- Locate the Web site and directory that houses the ASP application.
- Right-click the application site or directory, and then click Properties.
- Select Home Directory, and then click Configuration.
- Click Options, and then click to select the Enable Parent Paths check box.
- Click OK two times.
cwilliams38148.5822453704, the following error message appears, but only when attempting to log off. all other parts of the program seem to be working.
[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0xa04 Thread 0xa38 DBC 0x21ff024 Jet'.
, Hi,
I did some layout customizing on the register page on my site. ( http://www.lonestaricon.com/aspprotect/paypal_sub_signup/reg ister.asp)
Now when I tried to register, it seems like it goes to the next page, but it is blank.
( http://www.lonestaricon.com/aspprotect/paypal_sub_signup/add _new_account.asp)
If I log in under administration, it shows that I have registered. I can't seem to figure out what part of the code is wrong, so that the new account page will not load.
I'd would greatly appreciate any help with this.
Thanks,
Allison
, did you fix it because I see all the pictures just fine ?
http://mcintoshcounty.org/real_estate/view_item.asp?Ad_ID=1
,
Timecard Entry: 3/25/2006 4:30:07 PM
recieving of new equipement, , signed up a new user and did a setup., Finished work on copy and building a comparison chart based on Pauls print out, placed modified graphics, printed copy and submitted to beth for approval., had a pontential customer call with questions on dsl. authenticator was down and got a few calls on that, setup and start getting familiar with the cobalt server interface and cobalt linux., Lunch.....getting very tired by now.....been awake since Thursday morning errr, very busy...lots of people unable to authenticate...still seems to be problems with 5000., teched phone calls, TI BAIT STORE ADD RIVER REPORT, phones, radlog, voicemail, dial up issues, moving some nortel equipment. email, still real busy, lots of account changes, CC's, return calls from emails on expired accts. this morning. , * Task Force, Caddy Shack (BBQ Chicken), talking to National and Randall Pierce and Tim Badour trying to get the stupid car rented.....couldn't get it......Tim Badour is having Jeff Wood get me a Rent A Wreck in Watertown Monday, Register domain name for fx caprara- put in infopage request, create work order, contact andrea for work order number
over site with peggy, put in request to randy
contact mike campbell for passwords and send in request to peggy
Jeff lewis workforce- request- info sent to peggy
meeting with jim , go over ecommerce site information with dave
taylor concrete- send password - go over billing- send michele notice
lynns dolls cottage- go over billing with michele
colonial yachts- go voer info with michle- lucky star ranch- go ver info with michele
put togther info for watertown business fair
iron block- info for passwords- have peggy contact art
Art called again - password for web site
, Koffee Kove w/Matthew Sheley and Doug, Prepare for Investors Meeting, and IPRS conference call with BA and NS, On phone w/Joan Mavalivitch from Lafargeville Central. Wants to setup a demonstration for SoftGrades Project on April 27, Glenns Field Boces., travel to hoosick falls albany board voter, Walked over to Severance to meet Ed for the survey. , Darrel re: Status Sheet, Herald bldg, Meeting - Discussion re: Costguard, Course # 0303 - SPM, Found additional reading materials for Jeff and the other sales people to review, Team Mtg, enter bills, Reviewed Modem Log & Net. Log & email, E & V mail response, weekly staff meeting,
