I have a user who is trying to login. However, I am getting a error that I can't seem to find.
Username: executive.barcheski
Password: executive@amcpc.com

Encrypted Password: Ū?=¨`Ł…Ü

Error on check_user_inc.asp line 114

If (Request.Cookies("PASSWORDSYSTEMCOOKIE")("KEEPMESIGNEDIN") = "True") And (Request.Cookies("PASSWORDSYSTEMCOOKIE")("COOKIE_USERNAME") <> "") And KeepSignedInOption And Status <> "Checkem" Then
CheckUserSQL = "SELECT " & tbl_label_users & ".* FROM " & tbl_label_users & " WHERE (Username = '" & RC4(Request.Cookies("PASSWORDSYSTEMCOOKIE")("COOKIE_USERNAME "), CookieEncryptionKey) & "') And (Password = '" & Replace(RC4(RC4(Request.Cookies("PASSWORDSYSTEMCOOKIE")("COO KIE_PASSWORD"), CookieEncryptionKey), PasswordEncryptionKey),"'","''") & "')"
Else
CheckUserSQL = "SELECT " & tbl_label_users & ".* FROM " & tbl_label_users & " WHERE (Username = '" & Username & "') AND (Password = '" & Replace(RC4(Password, PasswordEncryptionKey),"'","''") & "')"
End If

CmdCheckUser.Open CheckUserSQL, ConnPasswords

error received: unclosed quote after 'Ū?=¨

Any ideas

Jason Johnson

Chris, if there is no way to change this, I understand. I just though maybe it might be possible and I can't find out if i don't ask.

Thanks Chris.

Let me know.

-john

I did all that you sugessted and all failed, you  said "I did a sign up.. your verify URL is not saved/set in the application variables. is this somthing I can change manually?  below are the steps I performed......

1 - made sure the web is it's own application in IIS

2 - Reset IIS in command promt

3 - Restarted the server, the only thing is I have not waited perhaps long enough for it to kick in. but it should have with the restart.

I am running windows 2003 on the front end with wondows 2003 and Exchange 2003 on the back end, is there anything else that may be causing this issure?

Thank you!

Matt...

Hi all

I logged in myself to my website, and I tried to log in to another with same username and password. But I was able to log in again.

It was supposed to block me from logging in, but it let me to log in.

there has got to be some configurations I must have missed.

Could you instruct me on this Concurrrent login so mine works as well...

thanks

that's they way it should be done..

the only other thing would have been to test everything with sql before trying to import any data.. and make sure all was fine at that stage




more info on the errors would be helpful.

Id' also carefully visually compare the SQL tables and fields with the SQL scripts and make sure all field types and settings got set correctly.

Also, make sure the user accessign the database has datareader and datawriter permissions of course.

Yes, thats cool.. post it here for sure.

Also, the way you allowed for your search engine is clever and probably was the easiest way to go.

You could do the same thing with the IP. Much easieri than the way I was thinking of doing it.

My site is composed of mostly asp based pages with some javascripting thrown in, but a fair amount is strictly html and javascripting. Currently I am using the javascript banner method throughout the site.

You have mentioned in the past that several other methods might be a better option for asp pages.

Examples would be:  XML Parser Method or asphttp method.

I was wondering if it is possible to use the javascript method on my non-asp pages and maybe the asphttp method on the asp pages and all in the same Zone?

Or, is it possible to use the asphttp method on all pages, whether they are asp or not?

I'm just trying to figure out what is the most efficient way to use the banner system.

Or maybe should I just keep it all javascript method?

Any helpful feedback would be appreciated!

Thanks.

-john

After turning off the friendly errors, here is the detail.

Active Server Pages error 'ASP 0131'
Disallowed Parent Path

/users/register.asp, line 16
The Include file '../dataconn_inc.asp' cannot contain '..' to indicate the parent directory.

ANSWER:
http://support.cjwsoft.com/forum/forum_posts.asp?TID=5&K W=Disallowed+Parent+Path+

Hello,

Unfortuantely I can not help you much regarding the javascript because I am a server side code kinda guy. Client side javascript just isn't my thing. That was free javascript code that I used for that function. I really do not know enough about editing client javascript. Sounds like you might though.

Style 1 is really a relic left over from the standard version. I just left it in in case someone wanted to use it. Like I said because it is javascript making it do more than it does is tricky (at least for me)

Now,, for actually getting description code. The thing to do is check out how that all works in the pic_window.asp file which is what style 2 two uses. Bascially descriptions for an particular album get stored in one text file. We read that test file. Put the lines into an array. Then display the info which gets run through a functions to convert some special characters used when saving back to normal.

I tried to look at your site but it woulnt load for some reason.

Good Morning - I getting errors in my system log that says "404 file not found" for a number of files - Here are a few examples:

/aspprotect/password_admin/ drop1.gif http://cidra.easycgi.com/ aspprotect/password_admin/edit.asp? User_ID=181	4	0.28%
/aspprotect/password_admin/ drop2.gif http://cidra.easycgi.com/ aspprotect/password_admin/edit.asp? User_ID=181	4	0.28%
/aspprotect/password_admin/ left1.gif http://cidra.easycgi.com/ aspprotect/password_admin/edit.asp? User_ID=181

I ideas on how to fix this?  Note: The system seems to be working fine, but I want my log files as clean as possible. 

Thanks.  shirley

MSACCESS 2000

server: windows

option pack: yes (after the install I have this problems with groups and edit users )

host permissions: yes

MESSAGGE:
Active Server Pages error 'ASP0113' Script time out/password_admin/groups.asp The maximum amount of the time for a script to execute was exceeded. ...

one thing to note... the time period we are talking about is going to to be whatever you have the session timeout set at in the settings.

perhaps making that value lower like 10 minutes is an option for you.. and might help to deal with situation

You really should just look at the documentation that came with the application. It tells you everything you need to know.

it is in the docs folder in html format.. it is also linked to from the aspclassifieds website

http://www.aspclassifieds.com/demo/docs/

cool.. let see if that works.  This was the command line that I had to enter in order for it to register.  Chris, as you stated before, you can try one of the other emailers, but you need a email server to tie to. 

"regsvr32 cdonts.dll"

Chris,

I understand.  I set it to a lower number that will hopefully be a good balance for the user.  I am simply AMAZED at what your software does and I thank you for all you have done.

Jess

I pull that crap on myself once and a while... or my favorite is leaving a bootable CD in the drive and then wondering why the heck the OS doesn’t come back up. I pretty much promised myself back in 2002 that I would never mess with anything minor after 10PM. For whatever reason I always start messing around trying to "fix" something and end up sorry... Granted if it’s an emergency I am all for it, but I get dresses in advance anticipating the practically inevitable drive down to the datacenter.

Good luck with that, I am sure you will be much better off in the long run.

Hello:

When using the Mass Mail feature and selecting the Users to ‘Active’ and the Access Level I want to send to the system will still send e-mails to the ‘Inactive’ users from the same Access Level.

In other words it sends to everyone in the Access Level regardless if you choose “Active” only.

Any ideas to correct?

Thanks,

-Ricardo

When I attempt to upload, it appears that the image uploads. I get a "Original Image Size 0 X 0 pixels"

they don't appear in the web pages, any thoughts? I am using VBscript to upload, my host has safileup but I am unable to use it in this script, thanks for any help

http://mcintoshcounty.org/real_estate/extras/server_info.asp

here's the site link

Never mind, had the path to the image folder screwed up 

Look in the "check_user_inc.asp" file..

You'll see the name of the cookie there and also get an idea how to access it.

In most versions it looks like this.

Request.Cookies("PASWORDSYSTEMCOOKIE")("COOKIE_USERNAME")

You'll want the cookie for the username because the session variable will not exist unless they have actually gone to a protected page during that session at the site.

It would probably be best the check for both the session and the cookie. That will make sure people logged in that arent using the cookie option still see the message you want to display.

Sorta like this..

GetUsername = ""
If Request.Cookies("PASWORDSYSTEMCOOKIE")("COOKIE_USERNAME") <> "" Then
GetUsername = Request.Cookies("PASWORDSYSTEMCOOKIE")("COOKIE_USERNAME")
Else If Session("Username") <> "" Then
GetUsername = Session("Username")
End If

Response.Write GetUsername

I would say that it isn't all that difficult using mySQL for the backend....the main thing is to make sure you set the primary keys for auto-incrementing in your database.  Alos need to make sure that any DELETE SQL statements are formatted like this

DELETE FROM tblName WHERE tblField=SomeValue

and not

DELETE * FROM tblName WHERE tblField=SomeValue

The same holds true for using MSSQL

thx for posting this..


Just a few notes... more than 100 pictures specified in the config file is not supported. You are of course on your own if you specify more than 100

Also, technically the post above should say more than 102 pictures... "I think" as you wont need more html cell code until then..

The loop in the code is probably how I should have done it in the 1st place but I was in a hurry to get this finished and I also never expected/wanted anyone to specify more than 100 pics per album.

Lastly.. depending on what style you are using in the config file the code above may not work as some of the styles do not use cells but line breaks instead..   At least from what I remember.

I am up to speed on how it works. My goal was to not have just a link to a protected page- so that when a user clicks it they get the "access denied" screen and then have to log in. My goal was to avoid that if possible by having them log in and then redirected to the protected page.

So this isnt possible? The only way for it to work is for a user to click a link to the protected page, get the denied screen, then login and be redirected?

Or is there another way..?

I made my point by rebuttling your "cafepress" with agreeing "YES" that is what i want... now you are changing this around on me. I dont think i can be ANY clearer in what i intend to do. It is extremely clear and i am not sure why its becoming more than it should be. I just want the user to be able to log in from ANY PAGE ON THE WEBSITE AND THEN BE REDIRECTED TO THE PROTECTED PAGE IF THE HAVE THE PROPER CREDENTIALS. It would be nice if this software gave an error message when an incorrect username/password was entered instead of simply refreshing the screen.

ok, well as far as what else to try I already told you..

you need to manually compare all those field settings with the sql script and make sure they all got set correctly...

you also need to tell me what email/name you ordered the application under... before I will continue this support with you.. at this point I don't know if you purchased the application or if you are using the unsupported lite version

The problem with that is when a user deletes an album, the album record does not get deleted from the DB, so counting all the records would return the accurate result. :(

Any hints?

It's MS Access, Version 7 (the Full one).

Anyway, I had inadvertently changed the user_id field type to "number".  When I changed it back to "autonumber", everything went back to normal.

Thanks you very much for your quick reply and sorry to have bothered you.

I did a google search and it turns out that error very well might have to do with ASP trying to send an email and that process failing.

That tells me your emailing from the application is not working so it is probably not something you edited incorrectly.

see this article...

80040211
http://www.aspfaq.com/show.asp?id=2026

Emailing was working as when I did your installation (I think I did it months ago, didn't I) so it must be some incorrect changes to your email settings in the admin settings screen. Try sending an individual email to a user from the admin users screen and see if it works. My guess is you will get the same error and means your email sending options are no longer correct or valid.

If that is the case I would ask you if you changed them or possibly something changed as far as your email setup goes. Passwords ? EMail Server .. etc etc etc