When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner. 

The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though) 

Really the best way to show it is with an example as seen below.

Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.

All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser, 

The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser. 

In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.



On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.

http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html

This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code. 

Banners no longer show up on my site ?

If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.

The web server must have crashed or lost power and now the application variables are in limbo/not working.

I have seen this happen a few times.

Basically the application variable system gets messed up because it was not shut down properlly.

The way to cure it are as follows.

Edit and save a banner in the system. Hopefully that gets things going again.

YES.. you need to edit your SWF file to link to the aspbanner system...

example.. the link may look something like this
http://banserver.powerasp.com/aspbanner/banner_redirect.asp? Banner_ID=60

of course you need to put in the right information for your site and whatever banner ID it is in your system

Like it says above.. if you save the new banner at least once and then come back to edit that link will be generated for you at the bottom of the edit page.

then when your flash banner is clicked on it will go track the click and then send them to the "link_url" specified for that banner when you edited it.
(you need to enter the final destination url there if you want that to work)

Wondering what might be causing a long delay to display the login screen?  This does seem to be intermittent.  Could be server/ISP related? Have experienced enough times to justify posting this question.

I can count up to 20 seconds after clicking on the link.  After login all other selections zip right along without problem.

http://gibsoncity.us/aspbanner/

Thanks, Lance

Protecting ASP Pages

To protect a page without using the Access_Level or Groups feature simply add this code to the top of that page.

Put this under the <%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

This is an example of a File Server Side Include. You could also use a Virtual Server Side Include.

The following URL explains what Server Side Includes are.
http://www.powerasp.com/content/code-snippets/includes.asp

Now when someone runs that page they will prompted to login. They will not be allowed access to that page until they successfully logged in.

An example of doing this is provided in the "default.asp" file included in the root of the Password System.
Look at the source code with a text editor to see the working code. It is quite simple.

 Protecting ASP Pages Using Access Levels

To protect a page using the Access Level feature simply add this code to the top of that page.
You simply specify the Access Level before the include file is called. In this example we are protecting the page with Access Level 4.

Put this under the <%@ LANGUAGE="VBSCRIPT" %>

<% CHECKFOR = "4" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

This is an example of a File Server Side Include. You could also use a Virtual Server Side Include.

The following URL explains what Server Side Includes are.
http://www.powerasp.com/content/code-snippets/includes.asp

Now when someone runs that page they will prompted to login. They will not be allowed access to that page until they successfully logged in as a Level 4 user.

Examples of managing Access Levels are provided in the "multiple_access_levels" folder included in the root of the Password System.
Look at the source code of the ASP pages in that folder with a text editor to see the working code. Again, It is quite simple to follow.

Protecting ASP Pages Using Groups

Please see the code generators in the admin are for the code to do that.

I am using cdont to send email. what do i have to do send email to other display my full name instead  of email address. In other word I want to see first name last name  in their email client instead of email address.

thanks for your help

How to bring up the Code Generators

Simply go to the zones screen.
Select a Zone from the list.
Check the "Show Banner Code" option.

Click on "Display Banners in Selected Zone"

SQL Server Datareader Datawriter Permissions..

here is a screenshot that shows how to set datareader and datawriter permissions on an aspbanner database using "SQL Enterprise Manager"

In this example we are making sure the aspbanneruser has those permissions on the aspbanner table in the database

btw: who is this hosting company anyway ?

and did they give you access to a control panel that lets you manage your site ? sometimes that is where you manage those permissions if their interface supports it

lastly, are frontpage extensions installed in your web so it can be connected to via frontpage ?

If the physical path isnt right and the permissions are not right it just plain will not work. You will not get an error.

If the filesystem object is disabled on the webserver it will not work either.
Something has to be wrong.

Please start a new thread when the topic changes.. thanks

It helps to keep the forums organized for other users in the future.

How can I make so it goes to certain webpages if user enters valid username and password??

I suppose user enters its information on check_user_inc.asp page, and username and password are stored on SQL database.

Thanks

False alarm. Dumb user alert (both the classifieds customer and me).

When I test fixes, I need to be looking at the right Ad_ID to get correct results

Also, I found this page which specifically talks about hidden IPN form values to change currencies

https://www.paypal.com/us/cgi-bin/webscr?cmd=p/acc/ipn-info

mc_currency	For payment IPNs, this is the currency of the payment. For non-payment subscription IPNs, this is the currency of the subscription.
	"USD"	The currency of the payment is U.S. Dollars.
	"CAD"	The currency of the payment is Canadian Dollars.
	"GBP"	The currency of the payment is Pounds Sterling.
	"EUR"	The currency of the payment is Euros.
	"JPY"	The currency of the payment is Yen.

right..

I had to open up the permissions to get it to work.  I now have to go back and uncheck each one for directory listing.. :)

Microsoft VBScript compilation error '800a0400'

Expected statement

/asplog/check_user_inc.asp, line 404

End If
^

Is this a standard database connection error so I should ask my IIS to make sure permissions are correct?

Thanks..!

sorry.. you just said above you were using XP SP2 so that is the article I referred you to as I just assumed you were talking about your local web server

here is my article on permissions regarding server 2003
http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

I can look at your installation monday if you like. In about an hour I leave for a wedding thingie and I wont be around again untill monday around noon

Try the uploading using VBSCRIPT method just for the heck of it. Perhaps there is an issue with the installation of the dundas component.

CJW

Okay, hopefully I'm posting in the correct area this time.

Currently we are utilizing ASPProtect 7.x

When using the Newsletter function, many members are indicating they are not receiving email.  No evidence of email in SPAM folders.  Also, when checking with email provider, they insist it is not being filtered prior to delivery to member's email address.

The following message does appear when a newsletter is sent.

error '8004020f'

/newsite/ASPprotect/scripts/emailing_subs_inc.asp, line 124

Line 124 is the line of code to 'send' the emails.  We have approx. 860 members who are on the list to receive the newsletter emails.  I have no way of knowing how many are not getting the email. Based on anecdotal evidence, I'm guessing it could be as high as 20%.

We are using CDOSYS / SMTP authentication with a real external email with MX records. Our website is hosted by Cbeyond.  They insist it isn't at their end. (for what it's worth)

Thanks for your assistance.

NPA

Connecting user is dbo of database.

User_ID is primary key with auto increment identity.

SQL Script of current table:
CREATE TABLE [dbo].[Security_Users] (
 [User_ID] [int] IDENTITY (1, 1) NOT NULL ,
 [First_Name] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Last_Name] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Company_Name] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Username] [nvarchar] (75) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Password] [nvarchar] (15) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Access_Level] [nvarchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Notes] [nvarchar] (1000) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Admin] [bit] NOT NULL ,
 [Active] [bit] NOT NULL ,
 [Expiration_Date] [smalldatetime] NULL ,
 [Email] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Address] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [City] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [State_Province] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Zipcode_Postal_Code] [nvarchar] (20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Phone] [nvarchar] (20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Counter] [int] NULL ,
 [Last_Access] [smalldatetime] NULL ,
 [Login_Limit] [int] NULL ,
 [Custom1] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Custom2] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Custom3] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Custom4] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Custom5] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Custom6] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [ValidateEmailCode] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Date_Created] [datetime] NULL ,
 [Validated] [bit] NOT NULL
) ON [PRIMARY]
GO

ALTER TABLE [dbo].[Security_Users] WITH NOCHECK ADD
 CONSTRAINT [PK_Security_Users] PRIMARY KEY  CLUSTERED
 (
  [User_ID]
 )  ON [PRIMARY]
GO

Please be more specific. What hit count are we talking about ?

User Logging ? Albums ? Something else ?

Please descriube the situation in detail. There are really no settings for any sort of hit count.

actually  I just went to it again and it was somewhat slow coming up this time..

perhaps you have some issues with the sql database.

it should be instant.. like this one I run on my server
http://banserver.powerasp.com/aspbanner/

I suppose it could also have something to do with sql server resources but its hard to say..

the reason being is because when I do installs I do not touch any of your existing content. I only install the base application and make sure everything in it working correctly and also that the example protected pages are working. I do not integrate it with your existing site or edit any of your existing web content. That is up to you

sorry about that, but it would be way too time consuming and editing people's existing pages is a good way to cause a lot of headaches for me and the customer if something goes wrong. Not only that but everyone uses the system differently and it wouldnt make sense for me to be the one doing that based on access levels, groups.. etc etc  which will all be custom to how you want things set up.

more on installation policies here.
http://www.cjwsoft.com/installation_service.asp

This is great FREE SQL Server Web Data Administrator App from Microsoft..

http://www.microsoft.com/downloads/details.aspx?FamilyID=C03 9A798-C57A-419E-ACBC-2A332CB7F959&displaylang=en

It is an ASP.NET web application that you install locally on your development server and then use to connect to a SQL database whether remote or local.

It can do nearly everything enterprise manager can do.

I have tested it and it works great for me.

Just installed software,  when I attempt to log on I get the following error (actually this is after I moved some of the include files to user).

Active Server Pages error 'ASP 0131'

Disallowed Parent Path

/gallery_admin/default.asp, line 25

The Include file '../dataconn_inc.asp' cannot contain '..' to indicate the parent directory.

What do I need to do to fix?

thanks.

Or at least I think so.  I have been trying to get this software to work so I can see if it meets our needs for an upgrade purchare. Here is my error.

Microsoft JET Database Engine error '80040e10'

No value given for one or more required parameters.

/aspprotect/scripts/populate_config_variables_inc.asp, line 15

My provider says that the problem is NOT on there end, that it is a problem with the code.  I think that it is a database connection problem.  Can you please help.  Below is my connection string based on what the setup page directed me to do:

ConnectionString = "data source=\\NAWINFS03\home\users\web\b1347\rh.957theride\asppro tect\data\database\ASPProtect_access2002.mdb; Provider=Microsoft.Jet.OLEDB.4.0;Jet OLEDB:Database Password=temp"

When I first set up the program I got this error:

Provider error '8000ffff'
Catastrophic failure
/aspprotect/scripts/populate_config_variables_inc.asp, line 11

Once again, the looked into it and said the permissions were fine and that the code was most likely bad.  But then the errror changed to the one that I first listed.  Which is the one I am currently getting. 

BTW here is the page address

http://www.957theride.com/aspprotect/password_admin/get_me_i n.asp

Thank you!

SQL Server Datareader Datawriter Permissions..

here is a screenshot that shows how to set datareader and datawriter permissions on a database using "SQL Enterprise Manager"

In this example we are making sure the aspbanneruser has those permissions on the aspbanner database in the SQL Server

Not sure because of the nature of the javascript method

for starters tighten up the html around the banner call

change

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<!------- ASPBanner Ad code ------------->
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >

</td>

to

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >
</td>

If that doesn't help I would suggest using the ASP 3.0 version of ASPBanner. It can serve banners to a any type of page extension and it runs just as well as the .NET version. There is a new iframe method for calling banners that you can try instead of the javascript. The iframe method is explained in the ASPBanner Unlimited section of the forum.

Thank you....  yes it does

Is there a limit in the number of Zones you can have in the database.

thanking you

OK, thanks.

Nick

If you want to have a login form on a non protected page that posts
to a protected ".asp" page use code like this.

Change the action of the form to the page you want them to log into.
Make sure to page you send them to is protected by the "check_user_inc.asp" file.

<center>
  <table border="0" width="400" height="200" bgcolor="#000000">
    <tr>
      <td bgcolor="#F4F4F4">
        <form method="POST" action="memberarea.asp">
          <input type="hidden" name="Status" value="Checkem">
          <p align="center"><font face="Arial">ASPProtect Login</font></p>
          <div align="center">
             <center>
             <table border="0" bgcolor="#C0C0C0">
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Username</font></small></stro ng></td>
                 <td><input type="text" name="Username" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Password</font></small></stro ng></td>
                 <td><input type="Password" name="Password" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB" colspan="2"><font face="Verdana, Arial, Helvetica" size="-1"><input type="checkbox" name="KEEPMESIGNEDIN" value="True">Keep
                   me signed in on this computer unless I log off.</font></td>
               </tr>
             </table>
             </center>
          </div>
          <div align="center">
             <center>
             <p>&nbsp;<input type="submit" value="Login"></p>
             </center>
          </div>
       
        </form>
      </td>
    </tr>
  </table>
  </center>

yes, admins have access to absolutely anything...

as for the other question what you should do is only show links to people logged in that they have access to.. then they wont get logged out when they go to a page they do not have access to

for example if someone doesn't have access to a level 4 page dont give them a link to go there... you can do that by checking the session variables and creating your hyperlink html code accordingly .. using simple if-else logic... you could even make a hyperlink non-clickable and add some text to it like (no access)

it's all about taking the time to intelligently designing the different areas of your web site. It takes a bit of time and work to really make a system flow the way you want it to.

other than that it becomes extremely complicated to not grant them access when they go to a page they dont have access to but also keep them logged in. It is just not designed to flow that way. If someone goes to a page they do have access to they get logged out. It sort of has to be that way because of the ways things flow.

more info on accessing user info after login so you can do that
http://support.cjwsoft.com/code/moreinfo198-1.htm

another good thing to check out is the provided examples for mutliple access levels. You can see that if you log into the default page for that that it only shows you links to pages you have access to. Done with simple if-else logic around the html links. It is using groups but you can do the same sort of concept using groups.

I'm having an issue importing. It moves the images from the /import folder and creates the thumbnails with no problem, but the full-size photos all have a size of 0 bytes.

http://www.larrysampas.com/gallery2/default.asp?CatLevel=2&a mp;Cat1_ID=1

This first one may be an obvious one, but is it only .asp files that I can protect as in no HTML files.

Can the program be set to protect my whole https directory contents (though the answer to the last question may have bearing here - there are html files as well as .asp in there) as in http://secure.mydomain.com

Thanks in advance

Hello,

I have ASPprotect 7 installed on my remote server.  I am able to go to the examples/default.asp page and login in without any difficulties.  If I copy the code from that page and paste it in a new page called the same thing but in a different folder, I get this error;  (Keep in mind that this is essentially the same exact page in a different location of the website)

Error Type:
Active Server Pages, ASP 0126 (0x80004005)
The include file '../../check_user_inc.asp' was not found.
/aspprotect/Pages/default.asp, line 3

I get the same error if I paste the "protection code" I have generated into the top of a current (.asp) page in my site.

Basically, the only pages that work are the ones that came with the program as examples.  Thats great, but now I need to make it work for my pages.  Any thoughts?

Is there a way to know if it is a SQL server with IIS5? My database type is MSACCESS.

Thanks!
Rhona (rookie)