You really should check out the documentation regarding the config file before you go any farther.

If the server supports ASP.NET you do not have to spend any money to have real fast loading thumbnails.


Also, licenses of ASPImage only cost 69.95 and regardless any quality host supporting ASP should have one of the 3 supported resizing components installed or else you should consider a better host like www.alentus.com Places like that have good hosting prices and give you access to 3000.00 worth of 3rd party asp components.

I really need more info on what you have going on?

This can sometimes be cause by a slow server / bad data connection.

Sometimes caused when someone is using the option pack but did not make the proper changes to the database.

Sometimes caused when a user adds users the database on his own and does some "incorrect" things..

The more details you can provide the better. Think of anything and everything and describe it.

SQL or MSACCESS... version of either
Server OS
Using Option Pack or not
Did you have your host set permissions...

etc etc etc

I am successfully using ASP protect on our site. I have one question:

The file Check_user_inc.asp looks a bit bland as I can't seem to use the sites Dreamweaver template. If I apply a template to this page, it is duplicated on other pages with this template.

How can I apply a template to this page?

Thanks

Clark

When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner. 

The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though) 

Really the best way to show it is with an example as seen below.

Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.

All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser, 

The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser. 

In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.



On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.

http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html

This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code. 

For some odd reason, the the export path has two backslashes (\\) at the end, thus generating an error each time I try to export. For example

C:\path\website\protect\data\export\\

This appears toward the bottom of the import_export_manager.asp page and is called by =ExportDirectory.

I checked under settings tab, no path ends with a "\". Any idea where else I need to look?

Nick

Christopher

I have gone back to your original files and uploaded them to another server folder and instead of using a DSN I have tried this with a DSN less connection and changed the database to MS Access 2002.

This has corrected the problem.
I will check this out again using the DSN with access 2002 to see if this was the problem. It may be something to do with an older format of database on this particular server.

I will let you know what I find.

Thanks for your  quick reply.

(User Search & Contact Mod) for ASPProtect Version 7.x

This will allow an individual user to search for other users as well as email or call them.

Notes: This is a down and dirty mod. The users page from the admin area was used as a starting point. I then edited it up real quick to be used as a user search. The way it is it shows the user email as a regular email link. If you want to set it up so emailing is done from the application and emails are not actually shown you will have to do some extra work. If you don't want phone numbers shown you will have to remove that column which is not very difficult.

Directions:
Back up your existing ASPProtect installation.

copy "search.asp" into your "users" folder

2006-03-10_143253_User_Search_Contact_Mod.zip

Direct your users there. They will have to be logged in to view the page.

WARNING: This has not been extensively tested for SQL Injection attacks.
I think it is perfectly fine the way it is by looking it over quickly, but use it at your own risk.

Testing for XML Parser Support

the microsoft xml parser is generally installed by default on all new server setups..

It allows ASP code to make calls to other pages anywhere on the new as well as a lot of other handy things..

download and run this ".asp" page to verfiy that it is installed and be sure it is available for you to use

2004-12-10_132620_test_xmlparser.zip

Make sure you run it from your web server through the web browser

Hi -

We are trying to set up ASPProtect 7 so that the user is redirected to a specific web page based on their group membership.

For example, immediately upon successful login:

Group 1 members are directed to page A
Group 2 members are directed to page B
Group 3 members are directed to page C

Users will only ever belong to one group.

We tried to use the Redirect_URL feature but it causes the browser to loop.

Could you let us know exactly how to do this.  We are not ASP programmers and need to work from an example.

Thanks!

Is it actually possible, with your product, to password-protect the folder that has the actual database without having to require customers browsing the listings to enter a password, or will password-protecting the database folder prevent customers from browsing the classifeds listings?

If they changed the paths they moved the site.

That means permissions for the database folder must be set again.

If permissions are not set and you are not using the correct new path info then you will still get errors.

Those errors the server reports back and quite generic and do no mean exactly what they say. They just mean everything is not perfect.

And everything just has to be perfect..

Hi - When I try the mass email feature, I get an error that says:

ODBC Microsoft access driver) too few parameters expected 1

/aspprotect/password/admin/send_mass_email.asp line 280

Oddly...this feature works fine when I use the original admin user that you setup. 

But I setup another one with my username and password (not test) - because I was afraid anything with "test" could get deleted. 

Any ideas on why the new admin userid would not work?  Note: I have not change any code from the original installation.

The default database password is "temp"

This is noted in the docs. You can also see the current password by looking at your connection string.

been working on this for about 5 hours today.. I think I found the problem and it involves a vbNullChar that the encryption process is creating only during login attempts

it then messes up during ASPProtect authentication because it blows up the SQL Statement to the database

like I mentioned before the chances off this happening are slim but possible as two people so far have been able to create the situation

I seem to have the HANNAH password working now using your encrption key

I need a little bit more time to clean up the files I have been working on. Then I will give you new "check_user_inc.asp" and "check_admin_inc.asp" files to try out

I am not sure totally understand your question.
I need you to explain it differently.

Any ".asp" page that is protected is going to automatically prompt them for a login box or log them in automatically depending on if they set that option.. In the end returning them to that same page.

So, it really all takes care of itself for the most part.. It doesn't even matter if the bookmark a protected page deep in your site. The system is smart enough to keep them at that page as well as handle their access.

Now of course if they are at an unprotected page of your site and navigate to a protected page they get a loin prompt or are allowed in if they already logged in...

Also.. when you say unprotected page ? do you mean ".htm" or ".asp"

People who have the option pack have a new feature called groups.

Groups are meant as a replacement for using the access levels as they are much more powerful. Support for pages protected using access levels is left in tact for backward compatiability for a customers older protection code.

A customer recently told me groups could not be used like access levels and that 8 access levels was not enough. This is how I explained that groups can do everything access levels can do.



Groups can honestly do everything access levels can do if you really think about it.
Using groups and protecting pages accordingly you could actually create a system that basically worked identically to the way the access levels works.

For example..

You make 8 groups and assign users to them accordingly

Protection code on page allows access to groups 1-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "1,2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any one of those groups would have access..

Protection code on page allows access to groups 2-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  2-8 would have access..

Protection code on page allows access to groups 3-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  3-8 would have access..

OK, well, that error is pretty self explanatory really. There isn't anything else it could mean.

What you showed me in that screen shot all looked correct, but still permissions to that file just can't be correct. The paths are correct. The path to the file looks correct. The ASPNET (ASP.NET) account looks correct.

I would try settings permissions directly on that XML file. Perhaps child permissions did not go through the way you intended. (the advanced tab must be used for that) If that doesn't work try giving ASPNET and Everyone full permissions on the file directly.

Possibly check the paths in the web.config file just for the heck of it.

Last case scenario, you can edit that XML file directly instead of using the screens in the application. Of course if that file does not have correct permission chances are other things like log files will give you issues as well.

That is all I can think of right now.

Yes, that’s all I wanted to know. The problem is on my end. The server is not creating the .NET site correctly. I think I got it working now. Thanks.

In case you wanted to know? The only reason I asked you is because you mentioned that you where having trouble with overseas piracy and my account is new. I figured it was my user error by just though I’d ask you first. Hope you have no more piracy issues and have a good rest of the day.

Thanks again for the quick response.

Hi Chris

I've just recently purchased ASPBanner and have been testing out serving multiple Tradedoubler code using the IFRAME method. I have four types of banner on the same page refreshing every 15 seconds. (this will change on the live site) 

I've been leaving the IE page up for x hours and coming back to find between 1-3 of the banners has stopped and in place is an "internal error".

BannerZone=3&Refresh=15|40|800a0046|Permission_denied 80

I thought it may have been the SQL permissions from one of your other messages so I gave the banner user the DataReader and DataWriter permissions.

Its still happening and around the same time in the logs theres a couple of file not found errors.

BannerZone=2&Refresh=15|23|800a0035|File_not_found 80 - 80.65.240.159

BannerZone=4&Refresh=15|25|800a0035|File_not_found 80 - 80.65.240.159

BannerZone=1&Refresh=15|25|800a0035|File_not_found 80 - 80.65.240.159

Any ideas? I'm hoping its not the server as there is currently only 2 sites on it and this is pretty much the only traffic.

Thanks

Colin

No I didn't...

The one I tried is the hosted one at my provider which I gave you the link for.

Thanks very much.  I will get that one and it may be much easier if I need to get into the Nitty Gritty of the database at some time.

Thanks