It's seems to work fine after renaming the file, rebuilding the application, and editing the web.config file to point to login.aspx. It looks like I can use your fine product and thanks again for the help. It was unusually easy. Merry Christmas…

Hey, I run a business and I will not have things like that mentioned in these forums.

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
 
<%
    Response.Write(Session("Groups"))
%>

This has not been officially released yet, but it is ready.
Here is the overview...
http://www.aspprotect.com/demo3/paypal_signup2/overview.asp

And the Code for the IPN Subscription Pack is 30.00.
http://www.aspprotect.com/ipn_subscription_support_pack.asp

A few people are using it and say it works very well.

Like the IPN Single Purchase System it is a separate directory you copy into the web site. One change must be made to your database so it’s pretty easy to get working. 

Though I am not guaranteeing this you should be able to accept Single IPN payments and IPN Subscriptions at the same time without the two bothering each other. I haven’t tested it but one customer is doing it and said it is working fine. It just involves manually specifying the IPN URL for one of the systems so it overrides the default IPN URL on your paypal settings. (As each system needs its own IPN URL) Its easy to do… just a form field you would add to the subscription form. I already looked it up. See below. 

Specifying Your Notification URL

If you only need to receive your IPNs at a single URL, you can enter that URL in the Preferences section of your Profile. If you would like to receive payment notifications for different payments at different URLs (i.e. if you need to separate payments made to different websites you run), you can manually pass the IPN URL with each payment by including it in that payment’s HTML code. Use the notify_url field to pass this information. The notify_url for a specific payment will be saved, and any subsequent updates to that payment (e.g. cleared eCheck) will be sent to that notify_url. When you pass a notify_url in your HTML code, it will override any preferences you set in your Profile. 

Anyway.. the Code for the IPN Subscription Pack is 30.00.
http://www.aspprotect.com/ipn_subscription_support_pack.asp

well, I was curious myself so I just tried it.

Good news is it worked just as I thought.

Only problem is your changing things to allow authentication info to be passed over the net in a url. If you can live with the security implications then it will work. I mean a sniffer could see that and end up knowing the username and password.. not likely but just putting that out there.

Of course now that I think about it unless you are running under SSL (https://) when you log in normally that info is in the post info anyway and possible to get at.. course not right out in the open like when you put it in the url and less likely to be noticed.

As long as your not doing it to access critical areas like the admin pages... and you monitor the log files once in a while it's probably nothing to worry about.

Perfect. Thanks buddy :)

I dont know about the unspecified errors. I really need more detailed information. (Since it has been working fine for quite a long time you might want to consider installaing the application from scracth again and see if you still get errors)

As for the log in not persiting. Did you by chance turn off cookies in your browser ? They are required for forms based authentication to function. Otherwise, yes you would need to log in to each and every page as you moved around.

Wondering what might be causing a long delay to display the login screen?  This does seem to be intermittent.  Could be server/ISP related? Have experienced enough times to justify posting this question.

I can count up to 20 seconds after clicking on the link.  After login all other selections zip right along without problem.

http://gibsoncity.us/aspbanner/

Thanks, Lance

It's not working because i guess im copying the viewstate also...and it comes up

Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.

Hi,

I need to be able to add about 9 checkboxes to the register.asp. would I be able to use one of the custom fields?

The other thing is once I add the checkboxes the value must be written to the DB and later read when displaying the person's Album.

Any idea on how I can do this.

Thanks

MySQL Database Setup

Use of MySQL is 100% unsupported as you can see from the site.
http://www.aspbanner.com/mysql.htm

Even still I recently had an encouter with an extremely Jerky person (read the thread above for more on that) and because of him I am adding this tutorial showing one way to set things up on a windows server using the official MySQL tools available.

Let me just say as well that there are 100's of 3rd party tools to work with MySQL databases and many ways to create the database and apply the database creation script. In the past it had to be done via the command line, but now there are a lot of visual tools you can do it with. Furthermore all hosting companies set MySQL up differently and give you access to varius interfaces to manage it which are all different, and that is primarily why I do not support it. How the hell could I support all those different interfaces many of which are totally custom?

The fact is 99% of the people that purchased ASPBanner to use with MySQL have done so without issue and love how it runs. Regardless here is how I set up a working MySQL database on a windows server proving it does indeed run with a MySQL database.

1st of all if you are setting up the server you need to download some things from http://www.mysql.com/ 
(btw: you local developers can install this on XP Pro as well if you like.)

For this article we are going to download the current non beta windows version of MySQL which is 5.0. ALso known as the Windows Essentials (x86) download. It's about 17 meg.

Because ASPBanner uses the MyODBC drivers (now called Connector/ODBC) to connect to the MySQL database you need to download those as well. (Our site flat out says this is required for MySQL use)

So I download those from here. http://dev.mysql.com/downloads/connector/odbc/3.51.html
Version 3.51 has been the current version for a couple years now.
You want the windows driver install which is about 2 meg.

The two downloads should look like this.



Now, on the webserver you run the version 5 setup (mysql-essential-5.0.19-win32.msi) I will guide you through it step by setp.



Hit Next



I am going to choose typical for the sake of this article.

Hit Next



Hit Next



Wait for a bit



I skipped this part.



Choose to configure the MySQL Now

Hit Finish

Hit Next

I am going to choose Detailed Configuration



Since I am on a development machine for this install I am going to choose Developer Machine. For a Real Server choose one of the server options.



For this article I am going to choose Multifunctional Database: You may want to pick one of the other options. That is up to you. ASPBanner will work under any of the scenarios.



I am going to leave the location at its default

Hit Next



Since this is a development machine these options are fine.

Hit Next



These options are fine as well.

Hit Next



Standard is fine for my development machine.

Hit Next



I am going to choose both of these options. The 1st one is Important and should be enabled on a real server so MySQL always runs. The 2nd is not so important.

Hit Next



Set the "root" password and do not forget it. You will need it to manage your MySQL server. I do not advise creating an anonymous account unless it is a development server and you just do not care. Whether you enable root access from remote machines or not is up to you so do some research on that. For this articles needs I am not choosing it.

Hit Next



Hit Execute and wait



If all goes well you will see this. (I actually got an error message about not being able to connect... I went to to Administrative tools/services and restarted the MySQL service and hit retry which cured that... it probably only did this to me since I have installed this before.. new installs probably will not have any trouble)

Hit Finish

Your done.. You just installed the MySQL Server (TIP: its usally a good idea to reboot and make sure the MySQL servce is running by default)

Now, moving on..

Lets install the MyODBC drivers.. (now called Connector/ODBC)

This one is a bit of a no-brainer so I am not going to go into detail.
Just run (mysql-connector-odbc-3.51.12-win32.msi) and run through all the defaults until it is done.. Choose typical when that comes up.

Your done setting up MyODBC on the server. If its not your server I guess you don't need to worry about installing all of this as its your hosts job to do that.

It a generic error that means something is wrong with your data connection.

http://support.cjwsoft.com/code/moreinfo27-1.htm

http://support.cjwsoft.com/code/moreinfo136-1.htm

Access to some sections of the forums must be requested.
Please Click on the following link and read all of it carefully.

http://support.cjwsoft.com/

It should be released sometime late May 2004 or early June 2004 but no gurantees as I am pretty busy right now with some projects.

There will be upgrade instructions and it should be a fairly easy upgrade.

Chris -

I am encountering a problem with items showing up.  When I click on a category and then select an item to view I get

THIS ITEM IS NO LONGER ACTIVE
DO NOT CONTACT THIS USER AS THIS ITEM HAS BEEN TURNED OFF
OR THE USER HAS SOLD THE ITEM.

I have verified the item has the item_active check.  For giggles, I even unchecked with the same results.

Thoughts?

ok... glad ya figured it out.

Yes.. for ASP server side code to run the page extension must be ".asp". I was gonna mention that but I guess I just didnt think anyone would do that.

no offense.. not everyone works with this stuff every day..

Need to know more about ASP ?
Check out these links.

	PowerASP This site was started on October 8th, 1998 and is a great resource.
	ASP101 This site has been around a long time.
	ASPSchools Intro to ASP Good intro to asp

15 Seconds Free resource for developers working with Microsoft Internet Solutions. 15 Seconds is the biggest IIS and ASP development resource in the world.

ASP FAQ Have a question about ASP? Check the ASP FAQ site. They've probably got the answer.

ASP Free Your 1st source for free ASP and ASP.NET live demos, downloads and more!!!

ASP Connections ASP Connections Conference for the ASP Developer features sessions on ASP Performance, IIS 5.0, ASP 3.0, XML, ADO, E-Commerce, VID, COM, COM+, MTS, DHTML, load balancing, and more. Speakers include Mike Amundsen, Wayne Berry, Charles Carroll, Michael Corning, Jeff Niblack, & Ken Spencer.

4GuysFromRolla 4GuysFromRolla: Web Technology, Programming, Humor... All this and it counts as work!

CoverYourASP.com A great new site. It's got some great stuff and is using JScript! A must see!

askASP Promising new site! Check out the question archives!

CodeHound CodeHound ASP - The ASP Developer's Search Engine!

CodeAve.com A neat ASP reference with some interesting features. Check out their "Script Writers"

ASPZone The website for advanced ASP developers.

Programmer's Resource This site is geared towards Activer Server Pages and Access developers.

Planet Source Code Search over half a million lines of free code!

DevASP A relatively new ASP site. Straight forward and informative.

www.LearnASP.com This in another site maintained by Charles Carroll, and it specializes in Active Server Pages programming issues. Contains links to a wide range of resources and articles.

ASPin.com The ASP Resource Index. Here you will find the stuff you need to take advantage of ASP and make your website an interactive mecca.

411ASP.NET The ASP.NET Resource Directory

ASP Sites A great place to go to find ASP resources fast!

Haneng.com A different ASP site.

Macromedia - DevNet While much of the content is Dreamweaver MX-centric, they also have a fair amount of plain vanilla ASP.NET content as well.

The Web Developer's Virtual Library The WDVL is part encyclopedia and part e-zine dedicated to covering all sorts of information about developing web sites... including ASP.

 

import/export feature WARNING !!

I just want to warn everyone that the built in import/export feature can be a little dangerous.
The reason being is when you import users they get new "Users_ID"s in the database.

The "User_ID" field is an autonumber field and that is why and there is nothing you can do about it.

So, if you are using a user's current "User_ID" to keep track up something important NEVER export the users and re-import them. Because their "User_ID" will change and you will be in trouble.

The PayPal signup features of ASPProtect actually use the "User_ID" like this and that is the main reason this warning is here.

now, that being said

If you are importing new users into ASPProtect

or

simply exporting existing users to another system

then this is nothing to worry about.


Basically, the moral of this story is dont think of the built in Import/Export feature as backup system because it is not. It is not a substistute for backing up your database.

It is a just a tool that can come in handy for various things.

Hi

I have purchased the Standard version about a week ago. Its a great script.

I have been able to select  uploaded banners from day one... but just now i dont seem to be able to select...

i know its hard for you to trouble shoot with such little information.. but i had to ask..

Should i maybe upload the site again ( but same the database first)?

regards

Domenic

Sydney, Australia

Adding Support For ServerObjects ASPMail

ASPProtect as you know does not support ServerObjects ASPMail component by default.

Here are directions to make it work.

In the ASPProtect admin settings area simply pretend as if you are using the softartisans sasmtp mailer component. ASPMail and that sasmtp component share the same properties… and the code used for them is nearly identical.

So search through the code for any place where email is sent and simply change

Set Mailer = Server.CreateObject("SoftArtisans.SMTPMail")

To

Set Mailer = Server.CreateObject("SMTPsvg.Mailer")

It is about 4 places. They are not too hard to find.

That’s the easy way to get all the emailing functions working with ASPMail

It's custimization work. and just not something I can support.
Basically it is basic ASP/Database work.

Something you kind of need to figure out on your own. It's not difficult work for a good asp coder but there is no easy way and it is time comsuming.

I wouldn't use the custom fields though. I would make your own.
It's simpler that way.

ok...

you got problems if you cant import a file created by the system..

You using SQL or MSACCESS and do any of the users data have apostraphes in it ?

I have been having some display issues with the .NET version of ASPBanner.  I set the size of the image, and I set the size of the banner and there is still white space above and below the image.  I am not using a text link below the banner, so I have it set to blank.

Here is a link to my page. 

http://www.nababaseball.com

Two of the three banners in the rotation on the main page have non-white backgrounds so it's easy to see the issue I'm talking about.

Is there a way to tighten up the formatting so that the image fits onto the page in the size specified?

JDooley

How can i get to this to register someone in the database only after the Paypal payment has been accepted.  I was testing it out to see if it makes it to my Paypal account (which it did just fine) then I closed Paypal before paying.  I logged in as the administrator and looked at the member list and the account was created anyway.  How can I stop this from being created until "only" after the Paypal payment has been "approved"?

What if this person never comes back to "try again"? Now the username he used (and is inactive) is not available for anyone else to use.  And it takes up database space.

I am using the Paypal (non-subscription)

Thanks in advance,
scottyFlasher

ITS WORKING

...I have earned a beer (dont tell anyone im underage)

... in addition it is a virtual include not a file.  I just tried to use file instead of virtual and then the ../ includes worked on the asp pages.

This is strange because they used to work like that on the 2000 server I had these sites running on.

Understood.... can you point me to a place where there are other methods of calling banners?  Do you mean not use Flash?  I am new to this and will need some pushing over the cliff!

Thanks

Dave

Yup, it probably means the virtual directory is not configured as an Application in IIS.

You did put this in a plain folder in your web, correcct ?
Not a subweb

Regarding the application settings for the virtual directory.. if it is your server you set that stuff up in the IIS console.

If hosted somewhere it is there responsibility to have that set up correctly for you and you need to contact them and ask them what the deal is.