enjoy the bar.. drink one for me.. cause that was the problem..

If logfiles do not get created it is most likely one of 3 things

1. invalid physical path specified
2. permisssions
3. filesystem object is disabled on the server

that path doesn't look correct to me for a live professionally set up server but only you or your server admins can know that for sure

you will not get any errors when things arent perfect.. just no physical logs

RecentActiveUsers and RecentPageRequrests are not related to the stored logfile feature.. Recent Activity is a different thing

whether you use SSL or not really does not effect aspprotect in any way

I say, the smart thing to do there is too not start them off at a http:// url

one way to do it is put a simple ASP redirect on that default page and send them to an SSL version of the page instead...

http://www.powerasp.com/content/code-snippets/redirects.asp

another way would be not start them off on a protected page right off the bat and offer links to the the protected area...

in my opinion thats pretty odd to be starting them off on a protected page anyway
SLL maybe, but protected right from the time they hit the default page of the site.. thats just odd.. usually you want o say a little something about the site your at and then link people to protected areas or give them a login form which posts to a protected area.


Regardless if you always want users at your site under https:// you should have code on every single page in your site checking the url info at every page load. Then if someone ever hits a page and is not using the https://  you can do something about it like redirect them to the SSL home poge or redirect to that same page but with the https:// in the url..

Ya, you must have tried to upgrade from a really really old version like you said which wouldnt really work out because those instructions are specifically for upgrading a version 6 database to version 7.

That line error you had was looking for the User_ID field and I bet the version you had was so old that you didnt have a field named that as a few years ago the field "ID" got renamed to "User_ID"

As for all the cool stuff... yup there is a lot of cool stuff in this version... glad ya like it so far

Yes worked fine

thanks

After I approve someone's username and password, then go to send them the default e mail telling them of the approval, the e mail never goes through.  The e mailing used to work well for many months, but it stopped working.  Any thoughts?

Spider

Christopher

Found this but I dont really know what to do with it or even if its the right thing.

<%
'=========================================================== ==================='

' Application:     Utiity Function
' Author:          ; John Gardner
' Date:         & nbsp;  20th December 2004
' Description:     Used to check the validity of a postcode
' QueryString:     None
' Version:         V1.0

' Required routines:        &nb sp; None
                    
'----------------------------------------------------------- -------------------'

function Check_Postcode (byRef strPostcode)

' This routine checks the value of the form element specified by the parameter
' for a valid postcode.

' The definition of a valid postcode has been taken from:
' http:'www.royalmail.com/docContent/other/Downloadable_Files/ PAF_Digest_Issue_5_0.pdf

' If the element is a valid postcode, the function value is returned as TRUE
' and the postcode is returned in uppercase with the separating space in the
' right place.

  Dim strPostcodeRegExp(2)   ' holds the regular expressions for valid postcodes
  Dim intCount        &nbs p;      ' For loop counter
  Dim strPostcodeCopy        ' Copy of postcode
 
  ' Variables used to hold regular expression object  
  Dim objRegExp, objMatches, objMatch
 
  ' Expression for postcodes: AN NAA, ANN NAA, AAN NAA, and AANN NAA
  strPostcodeRegExp(0) = "^([a-z]{1,2}[0-9]{1,2})([0-9]{1}[abdefghjlnpqrstuwxyz]{2})$"

  ' Expression for postcodes: ANA NAA, and AANA  NAA
  strPostcodeRegExp(1) = "^([a-z]{1,2}[0-9]{1}[a-z]{1})([0-9]{1}[abdefghjlnpqrstuwxyz]{2})$"
 
  ' Exception for the special postcode GIR 0AA
  strPostcodeRegExp(2) = "^(gir)(0aa)$"

  ' Copy the parameter and convert into lowercase
  strPostcodeCopy = Lcase(strPostCode)
 
  ' Assume we're not going to find a valid postcode
  Check_Postcode = false
 
  ' Strip out spaces
  strPostcodeCopy = Replace (strPostcodeCopy, " ", "")
  Check_Postcode = False
 
  Set objRegExp = New RegExp
 
  ' Check the string against valid types of post codes
  For intCount = 0 to Ubound(strPostCodeRegExp)
 
    ' Check next pattern in list
    objRegExp.Pattern =  strPostcodeRegExp(intCount)
    If objRegExp.Test (strPostcodeCopy) Then
   
      ' Post code found. Ensure input parameter is in correct format.
      Set objMatches = objRegExp.Execute (strPostcodeCopy)
      Set objMatch = objMatches(0)
      strPostcodeCopy = Ucase (objMatch.subMatches (0)) & " " &  Ucase (objMatch.subMatches (1))
     
      ' Show that we have found the postcode
      Check_Postcode = True
    End if
  Next
 
  ' Ensure that the uppercase postcode gets returned if valid
  If Check_Postcode Then strPostcode = strPostcodeCopy
 
End Function
%>

regards

John

Well I have the web hosting tech looking into the memory issues at this point.  Unfortunately I don't have another machine to be able to run the asp on that would run it correctly so that I can just publish it over.

After taking another look at this and trying your suggestions without success, it appears that in Windows 2003 server it is nearly impossible to remove the READ ONLY attribute from the _database folder.  I'm wonder if this could the cause?

Thanks 

Glad it is working.. for anyone reading this the customer bascially did this
http://support.cjwsoft.com/forum/forum_posts.asp?TID=36& PN=1

That being said asp photo gallery actually has a few more places that send email that you going to need to modify as well. Off hand the reply to album, admin massemail, admin send email,and postcard features come to mind possibly as 3 of them.

using a multiple file search and replace utility like ReplaceEm would be the easy way to do all of this in one step and find all the instances

http://www.orbit.org/replace/

Microsoft VBScript compilation error '800a03f9'

Expected 'Then'

/aspprotect/password_admin/upload_post.asp, line 6

If Session("Admin") <> "True"



If I upload the text file by FTP and then try to import it it only tends to import the first two existing rows.

All collumns match but not sure if I need to add "User_ID". I have added it and created consequecutive numbers.

Any assistance would be appreciated.

Thanks

sorry.. you just said above you were using XP SP2 so that is the article I referred you to as I just assumed you were talking about your local web server

here is my article on permissions regarding server 2003
http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

I can look at your installation monday if you like. In about an hour I leave for a wedding thingie and I wont be around again untill monday around noon

Try the uploading using VBSCRIPT method just for the heck of it. Perhaps there is an issue with the installation of the dundas component.

CJW

I have sent an registration email (as test) to both a yahoo account and also my own email server and in both cases I get the same issue, all else is working great. I am sure its somthing simple, perhaps I am over looking somthing else. the site url is www.rochestertek.us/asp/users/register.asp if this helps

Again thanks.

glad it is working now

sorry ya had trouble.

The version of aspbanner you have should not matter.

What you are doing here is wrong.

<PARAM NAME=movie VALUE=" http://www.innovationtools.com/aspbanner/aspbanner/banner_re direct.asp?Banner_ID=25">

PARAM NAME=movie is supposed to link to your ".swf" file.
And thats why all you see is black.

I don't think you quite understood all of that information fully.

Your ".swf" files needs to be coded in FLASH to link to the aspbanner redirect url. You don't change that flash calling code like that.

The ".swf" file links to the aspbanner redirect url which tracks the click and then redirects the user to the Link URL

You basically need to code your ".swf" flash file to go to that aspbanner URL or code your flash file so it can take a parameter for the url it clicks to (like the macromedia article talks about. This has to be done when editing the flash file in the flash editor before the file is saved.

If you dont have access to the original ".swf" to edit it and re-save it.. your out of luck as far as tracking clicks goes

This has not been officially released yet, but it is ready.
Here is the overview...
http://www.aspprotect.com/demo3/paypal_signup2/overview.asp

And the Code for the IPN Subscription Pack is 30.00.
http://www.aspprotect.com/ipn_subscription_support_pack.asp

A few people are using it and say it works very well.

Like the IPN Single Purchase System it is a separate directory you copy into the web site. One change must be made to your database so it’s pretty easy to get working. 

Though I am not guaranteeing this you should be able to accept Single IPN payments and IPN Subscriptions at the same time without the two bothering each other. I haven’t tested it but one customer is doing it and said it is working fine. It just involves manually specifying the IPN URL for one of the systems so it overrides the default IPN URL on your paypal settings. (As each system needs its own IPN URL) Its easy to do… just a form field you would add to the subscription form. I already looked it up. See below. 

Specifying Your Notification URL

If you only need to receive your IPNs at a single URL, you can enter that URL in the Preferences section of your Profile. If you would like to receive payment notifications for different payments at different URLs (i.e. if you need to separate payments made to different websites you run), you can manually pass the IPN URL with each payment by including it in that payment’s HTML code. Use the notify_url field to pass this information. The notify_url for a specific payment will be saved, and any subsequent updates to that payment (e.g. cleared eCheck) will be sent to that notify_url. When you pass a notify_url in your HTML code, it will override any preferences you set in your Profile. 

Anyway.. the Code for the IPN Subscription Pack is 30.00.
http://www.aspprotect.com/ipn_subscription_support_pack.asp

Connecting user is dbo of database.

User_ID is primary key with auto increment identity.

SQL Script of current table:
CREATE TABLE [dbo].[Security_Users] (
 [User_ID] [int] IDENTITY (1, 1) NOT NULL ,
 [First_Name] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Last_Name] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Company_Name] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Username] [nvarchar] (75) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Password] [nvarchar] (15) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Access_Level] [nvarchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Notes] [nvarchar] (1000) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Admin] [bit] NOT NULL ,
 [Active] [bit] NOT NULL ,
 [Expiration_Date] [smalldatetime] NULL ,
 [Email] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Address] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [City] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [State_Province] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Zipcode_Postal_Code] [nvarchar] (20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Phone] [nvarchar] (20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Counter] [int] NULL ,
 [Last_Access] [smalldatetime] NULL ,
 [Login_Limit] [int] NULL ,
 [Custom1] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Custom2] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Custom3] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Custom4] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Custom5] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Custom6] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [ValidateEmailCode] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Date_Created] [datetime] NULL ,
 [Validated] [bit] NOT NULL
) ON [PRIMARY]
GO

ALTER TABLE [dbo].[Security_Users] WITH NOCHECK ADD
 CONSTRAINT [PK_Security_Users] PRIMARY KEY  CLUSTERED
 (
  [User_ID]
 )  ON [PRIMARY]
GO

A very common and extremely bothersome error encountered when running ASP apps that connect to a database is the "80004005" error. It comes in many varieties.

These articles cover it.


(an article I wrote)
http://www.powerasp.com/content/hintstips/permissions.asp

(more articles)
http://www.aspfaq.com/show.asp?id=2009

http://support.microsoft.com/default.aspx?scid=kb;en-us;3065 18

http://www.aspfaqs.com/aspfaqs/ShowFAQ.asp?FAQID=115

http://www.macromedia.com/support/ultradev/ts/documents/8004 005_cannot_open_unknown.htm

I just upgraded from 6.0 to 7.0 primarily because we were limited in the choices of email systems we could use to send an email validation message.

Previously, with 6.0, we were using CDONTS to send an email validation message to new registrants. Unfortunately, AOL email addressee's were not receiving the vaildation email from us. I received a reply to another post I made on this forum that the problem was due to the fact that aCDONTS generated email has no MX record and AOL blocks non-MX record containing emails.

Well, I upgraded to 7.0, switched to CDOSYS (Using SMTP Virtual Server) with SMTP Authentication and it appears that AOL is still blocking the validation email.

Any suggestions, comments?

Larry,

I have a new computer up and running and am back on the Internet full time. I am here to help when you are ready to continue with this.

I went to your site to look around and "try it" like you mentioned but I can not really try anything as the admin username/password seems to be something other than the default

Hi,

I don't see any good reason to rename any of those files.

Changing them though may involve changes to the code recompiling, etc etc... it is not something I support.

OK, I updated the server with the SP 8 Jet updates and this had no effect.

Then I loaded the asptest file and put in the correct path. The results were:

Failed: Database could not be connected to....

Error reported from server:
Error source: Microsoft OLE DB Provider for ODBC Drivers
Error number: -2147467259
Error description: [Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x784 Thread 0x854 DBC 0x2101014 Jet'.

I purchased two site licenses for ASP Protect a while back and am now trying to implement the application.

The connection to the database is fine, because it recognizes the user and displays the user name.  However, there must be a problem with the permission because I get the DNS error information from the On Error in the check_user_inc.asp file.

I set the permissions on my PC as you indicated, both on the folder and the database file.  But get the error and cannot access the database to view or modify.  I also uploaded the file to my web server and set the permissions as well, but get the same problem.

You mention on your forum that it is not the code, but I don't understand if the code is correct and if it finds the database and the permissions have been set as you indicate, why doesn't the code work?

If you would like me to, I also have no problem going into your machine real quick via remote access and setting permissions / putting the right connecting string in there for you.

I need to go in as an administator though to set the permissions.