People who have the option pack have a new feature called groups.

Groups are meant as a replacement for using the access levels as they are much more powerful. Support for pages protected using access levels is left in tact for backward compatiability for a customers older protection code.

A customer recently told me groups could not be used like access levels and that 8 access levels was not enough. This is how I explained that groups can do everything access levels can do.



Groups can honestly do everything access levels can do if you really think about it.
Using groups and protecting pages accordingly you could actually create a system that basically worked identically to the way the access levels works.

For example..

You make 8 groups and assign users to them accordingly

Protection code on page allows access to groups 1-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "1,2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any one of those groups would have access..

Protection code on page allows access to groups 2-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  2-8 would have access..

Protection code on page allows access to groups 3-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  3-8 would have access..

Weird

ITS WORKING

...I have earned a beer (dont tell anyone im underage)

When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner. 

The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though) 

Really the best way to show it is with an example as seen below.

Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.

All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser, 

The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser. 

In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.



On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.

http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html

This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code. 

here is a thread that may help you if this is what you were getting at

http://support.cjwsoft.com/code/moreinfo389-1.htm

like I said you made changes to something to cause that...

users/user_area.asp

runs fine the way it ships "it is one of things I tested earlier when I looked at your installation for you"

If you want I'll go look via FTP and tell you what is wrong

Some of our users complained that their users id and passwords are sent in the clear. So we decided to invest in an SSL certificate from Verisign. It has been tested fine with all forms and pages in ASPProtect version 6. The only remaining page which I am not sure how to protect is the home page. Let's say my home page is http://www.MyDomain.com/index.asp. When the user goes to this link he/she will be presented with the check_user_inc.asp page so he/she can enter their ID and PW. So how to make the login information send from this page thru HTTPS?

5300 users honetly wouldn't even phase the database or the code... even with MSAccess...you got other problems and I can say that with 150% certainty

my guess is permissions on the database folder are not quite right or the odbc drivers have issues.. something along those lines..

access databases act up when full modify permissions are not given to the folder they are in.... they can also act up if the odbc drivers are very new and you are not using a newer version of the access database such as 2002 version as opposed to a 97 or 2000 version

using a system dsn as opposed to a dsn-less connection can also cause BIG issues. always use a DSN-LESS connection

you can also have big problems if just the database file is given permissions instead of the whole directory it is in

also, the script timeout has nothing to do with it.. if that is happening something is wrong with the data connection like I said... no amount of changing timeouts is going to cure it...

how permissions are correctly set
http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

why system dsn's with access databases are bad news
http://support.cjwsoft.com/code/moreinfo9-1.htm

I know it worked at 1st but it can still be related to all of this because when permissions are not perfect databases will work ok for a while and then act up. it all has to do with the temporay lock files that access creates and deletes on a regualr basis

when you get back to work.. your   "redirect.asp" needs the password include file at the top of it.. or that wont work either..

and of course those pages you send people to all need to be repaired

Microsoft has a free version of SQL server 2000 than you can run on a development machine.

http://www.microsoft.com/downloads/details.aspx?FamilyID=413 744d1-a0bc-479f-bafa-e4b278eb9147&DisplayLang=en

This is really the same thing as the MSDN version of SQL server that comes with Visual Studio

It is limited in two ways.

Just got back 10 minutes ago..
Missed plane yesterday because of traffic and the flight today was 3 hours plus 4 hours of driving

The fact that you are using Server 2003 is not relevant. I am very familiar with it and all my sites run on it.

The ASPNET account will be there by default once the .NET framework is installed. It won’t just show up in the list, you have to search for it like my article mentions.

http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

Hello -

Believe it or not I finally can access the photogallery. You were right Chris regarding the unzipping of the files.

Now onto the next challenge! I have set up three categories and proceeded to create a test album. I uploaded a couple of pictures (yeah that worked!!!) but the album does not show up on the default.asp page under the category.

Please advise -
Rhona (rookie)

The album ID thing is completely normal and by design. Once an ID in the database is used it can not be used again. That is how autonumber fields in a database work.

As far as not being able to delete images... Are you by chance using ASP.NET to show dynamic thumbnails... Because if you are you must turn that feature off and wait 20 minutes or so (maybe more) before you will be able to delete any of the images. It is because the current version of the ASP.NET script used to make the thumbnails locks the images on the server temporarily anytime it creates a thumbnail.

It is a known issue... and there is no fix at the moment other than what I told you above.

I have a customer who is asking the following:

... could you make a link from it to our website and is there a way to see what traffic goes from us to them.  They are going to pay a commission on sales, however I need to be able to track who views their site...

Wishful thinking or could you add code to track their IP address and display in the report section?  Not sure that would be enough to satisfy this request.   Suggestions?

Thanks, Lance

The links to view that info are on the main users screen of the admin area.

Down below...

They wont show up unless you have that stuff enabled in the settings screen as well.

Hello,

If you are using ASPProtect Version 7 it is possible because version 7 supports html emailing. In any other version it would require some custom coding to add html email support. You would have to sort it out by experimenting and editing the emailing code. All the email methods have documentation on the web in some form or another showing how to send html emails.

Also,
sometimes depending on the email component being used and the email client reading the email a link in a text based email will get hyperlinked automatically. For example outlook usually will do that, but it doesn't always in other situations.

Lastly, we have special upgrade pricing should anyone want to upgrade to ASPProtect Version 7. It really has a ton of great features.

Best Regards,

Chris Williams
www.CJWSoft.com

(Indemnification Agreement Mod)

This very simple mod will add an Indemnification Agreement Pop-up to the registration signup form which must be agreed to before continuing. This is often done for legal reasons to help cover yourself if something should come up later on.



Instructions:

Download 2006-03-19_212700_Indemnification_Agreement_Mod.zip which contains "terms.js" and put it in your scripts folder. It contains the text that will be displayed in the pop-up. You can of course carefully edit it with a text editor to say whatever you like.

Now carefully edit "users/register.asp" with a text editor. Add this bit of code in blue right after the include to the "footer_inc.asp" file like so. It will be near the bottom of the page.


<!--#INCLUDE FILE="footer_inc.asp"-->

<% If ErrorMessage = "" Then %>
<script language="JavaScript" src="../scripts/terms.js">
</script>
<% End If %>

Your done, that's it. Now when "users/register.asp" is run for the 1st time the pop-up will come up.

Humm, Did you make any changes to the code ?
Solid Black is not the default so it must have changed at least once.

Otherwise it might be some sort of application variable problem.
I would make sure the web is and "application" in the IIS console.

OK, I figured out the problem.  Not running ASP becasue the pages are not saved as ASP but rather HTM... OK so I am smart like a tractor but strong like an ox.

yes, there is upgrade pricing
http://www.aspprotect.com/purchase_v7_upgrade_pricing.asp

and upgrade instructions here in the forums

if you install it in the same directory structure you wont have to make any changes to the pages in your site you have already protected.. because the code to protect a page will be the same

now, anytime you upgrade an application like this there is going to be a lot of work involved especially when there have been so many changes
http://support.cjwsoft.com/code/moreinfo173-1.htm
whether or not you upgrade is up to you

Like I said you can make version 6 work with CDOSYS and a remote email server. You just need to do some research on CDOSYS code and spend the time needed to make the code use it. I however am not going to spend time detailing all of that when I created a new version that does it.

Microsoft VBScript compilation error '800a03f9'

Expected 'Then'

/aspprotect/password_admin/upload_post.asp, line 6

If Session("Admin") <> "True"



If I upload the text file by FTP and then try to import it it only tends to import the first two existing rows.

All collumns match but not sure if I need to add "User_ID". I have added it and created consequecutive numbers.

Any assistance would be appreciated.

Thanks

I believe what happened is we received the older copy of ASP Banner iwht our purchase of ASP Protect and were notified of a free update to download aspbanner_unlimited_v8.2_feb_26_2005.zip which we did, and that's the one i recently put on our site.

  Sounds from your reply that something technical is going on to the point where I will have to hire one of our Web consutants to dissect for us.  We'll try again and track our issues and send another request for information when we can show you a specific example of what is happening.  I'll be in touch.

I have been able to successfully edit some text colors, but there seems to be one page that wont change the text color. Inside the users/ folder, the login.asp page, i cant seem to change the text color from ffffff to 000000 so it can be read on my background color. Every page in the script is correct but this one.

Thanks.

... in addition it is a virtual include not a file.  I just tried to use file instead of virtual and then the ../ includes worked on the asp pages.

This is strange because they used to work like that on the 2000 server I had these sites running on.

I assume you mean 500 pixels wide

no.. because you cant reliably tell a pictures image width without an image resizing component to look it up.. asp can not do things like that on its own

serverobjects has a free component called "imagesize" that can do it as well but you need access to the server to install the component
http://www.serverobjects.com/products.htm

so if you cant do that with regular asp code you definetly can not stop the upload proces because the picture is too wide..

heck, that would be nearly imposible to do regardless.. even with the best 3rd party components at your disposal

even with an image resizing component you would have to allow the upload.. then check the pixel width.. then delete it.. tell the user what is going on...etc etc  .. all a very complicated process

It's MS Access, Version 7 (the Full one).

Anyway, I had inadvertently changed the user_id field type to "number".  When I changed it back to "autonumber", everything went back to normal.

Thanks you very much for your quick reply and sorry to have bothered you.

Yeah, its a win2k server.

Im up and running now (my guess is ASP wasnt installed, but he did not say), but am not having luck with any of the email.  I contacted my host to see what is available and have yet to hear back.  Do you generally recommend people to run CDOSYS?

Ive been reading through the docs, and the users and protection seems to be pretty straightforward.   Nice!

The only other real question I have (and cant find in the docs) is how to remove the self registration option all togehter.  My client wants to add its users manually, and not give the option for them to sign up themselves.  Do I just find any remove any code that references it?