In addition to that I just noticed the </href> you have in there.. man that is some scary stuff you came up with.. that may appear to work and make a link but it is not correct. Each link will work but never truly be closed.

That is just not valid proper use of the anchor tag.
You make a link in html like so

<a href = "somepage.htm">somepage.htm</a>
http://www.w3schools.com/tags/tag_a.asp

Then your surrounding each link with <span lang="en-us"> </span>
Not sure why ?

yes, there is upgrade pricing
http://www.aspprotect.com/purchase_v7_upgrade_pricing.asp

and upgrade instructions here in the forums

if you install it in the same directory structure you wont have to make any changes to the pages in your site you have already protected.. because the code to protect a page will be the same

now, anytime you upgrade an application like this there is going to be a lot of work involved especially when there have been so many changes
http://support.cjwsoft.com/code/moreinfo173-1.htm
whether or not you upgrade is up to you

Like I said you can make version 6 work with CDOSYS and a remote email server. You just need to do some research on CDOSYS code and spend the time needed to make the code use it. I however am not going to spend time detailing all of that when I created a new version that does it.

Hope the wedding went well.  I have one this weekend.

I was successful at performing an upload.  The free upload software was either not configure properly (probably) or not working.  I downloaded the trial version of softartisan's upload (which is like over $300) and it started working. 

Can more than one photo be uploaded at one time (like a whole folder full of photos) or does each have to be done individually?

I've got an ecommerce module that's running on it that uses access for the db.  Connecting into that thing is slow as well, but I figured that's because of the complications and volume it handles.

So as far as importing on a faster machine and copying it over to the server...what suggestions do you have?

Just an update,,,

the permission were all correct.... i left it and tried from my pc at work and it works fine... so i dont know what hahhpened.... thansk for your quick response

regards

Domenic

Sydney, Australia

I would kile to see more support for the groups function:

1. on the password_admin/default.asp page have a coulmn listing groups

2. ability to change groups in bulk eg change the expiry date for all group x members

Cheers

New Features added to 7.x

1. Entire application gone through and updated.
2. New graphics, new look and feel
3. Passwords and Cookies are now encrypted using separate keys individual to each customer install.
4. Groups Feature... powerful way to protect pages based on group access
5. Ability to upload a picture for each user.
6. New printable profile user screen.
7. Supports 13 email components as well as outgoing authentication for a few of the email components
8. New Lockout option. "However many" try’s to login and you are locked out for a certain amount of time.
9. PayPal signup routines for both single payments and subscriptions integrated into the application. Everything is handled automatically. Charging for membership couldn't be easier. 
10. New Newsletter Feature allows you to send newsletters to those subscribed. 
11. New ability to Email users soon to expire
12. HTML emailing for people using CDOSYS. This includes an inline html editor so you can send out some really professional looking emails.
13. Ability to redirect a user anywhere on 1st login
14. Option to turn off Login Remember Me Feature
15. Login Form now very easy to edit
16. All paths for places that need permissions can be easily changed.
17. Works with Parent Paths Disabled on the web server.
18. Company Name is now an optional field
19. Handy javascript popup date selectors
20. All date functions now internationl date friendly
21. Password conversion routine to upgrade existing users to the password encryption
22. Import / Export of user database built in
23. Protection Code Generators
24. Notes Feature. Javascript Popup on users screen that allows you to quickly see information without going to their edit screen
25. Mass email users incuding ability to send them usernames and passwords all at one time.
26. Option to not allow concurrent logins by the same username
27. Optional feature to keep track of recent users that have logged in as well as allow you to view the information.
28. Optional feature to keep track of recent users that have logged in, what pages they accessed, and when, as well as allow you to view the information.
29. Ability to protect other files types other than just protecting the viewing of the ".asp" pages. We provide working example code showing you how to protect images and file downloads in your protected ".asp" pages. You can protect nearly any type of file from downloading and viewing. (gif, bmp, jpg, zip, exe, pdf, rar, mp3,etc..)

sure (XP PRO), see my article on that

http://www.powerasp.com/content/new/windows_xp_pro_and_permi ssions.asp

Javascript Popup/Pop Under Generator

Until I have time to make one I suggest using the one on the banmanpro support site as it is pretty nice.

Just dont use option 2 on that page as that is specific to banmanpro

http://www.banmanpro.com/support/popupgenerator.asp

Trying to make sense of this.  I am still confused.  In the file config_inc.asp.  I found the setting for "uploaddirectory".  That entry looks like this [UploadDirectory = CmdGetConfiguration("UploadDirectory")].  I assume there is a config file where the value of upload directory is located. 

The settings in the config_inc.asp file have not been changed.  they are set to the way it was delivered.  Is there a document that gives instructions as to what and where the config settings are to be changes?

Hi - I am a recent user of your software. I administer it for the owner. I probably missed something in your forums somewhere - but I'd like to know how to stop the software from sending an "accept registration" e-mail (after they fill out the registration page) from going out so fast - usually within minutes.  I'd like to know how to defer the message for 24 hours, more or less, so that our company can go over the registration details and decide whether to allow the person registering to actually have access to our protected website pages.  The program is working very well and we are excited about it.  So far, no problems (knock on wood!).

Thanks so much for your help!

I uploaded the files designed for an aspprotect folder at the root of my site (mysite.com/aspprotect) and went to mysite.com/password_admin/get_me_in.asp and receive this error:

Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0xf54 Thread 0x908 DBC 0x90c41dc Jet'.

/aspprotect/scripts/populate_config_variables_inc.asp, line 11

I am assuming my host has still not set rights properly and that is why I receive this error. Am I correct?

 I will definitely recommend hosting company you suggested for our businees site.

Adding Support For ServerObjects ASPMail

ASPProtect as you know does not support ServerObjects ASPMail component by default.

Here are directions to make it work.

In the ASPProtect admin settings area simply pretend as if you are using the softartisans sasmtp mailer component. ASPMail and that sasmtp component share the same properties… and the code used for them is nearly identical.

So search through the code for any place where email is sent and simply change

Set Mailer = Server.CreateObject("SoftArtisans.SMTPMail")

To

Set Mailer = Server.CreateObject("SMTPsvg.Mailer")

It is about 4 places. They are not too hard to find.

That’s the easy way to get all the emailing functions working with ASPMail

Can I have the logon be in a top frame while having the protected pages displayed in a main frame?

Using frames with forms based authentication is not the best thing to be doing. Your much better off not using frames and using includes files to do a virtual frames sort of thing (search google) but if you are going to use frames I would suggest password protecting the frameset page as well as any pages it contains.

If you want to have a login form in a non protected top frame all the time.. that posts to a lower frame that is password protected.. you would do this
http://support.cjwsoft.com/code/moreinfo169-1.htm
but change the target of the form to one of your frames

personally though I think that would be a somewhat goofy setup to have going on


Also, how will it behave if a user moves in between a protected page to a public page and back to the protected page again?

As long as they have cookies enabled which is required for session variables to work... then you will have no issues because once they come back to a page they have permission to they will just be allowed in without login.. at least while that session is still active.. or for a longer time if they choose the remeber me option which keeps track of them with a cookie .

Really, the best thing to do is expirment and see how things behave.

I don't believe that the iframe method is supported in a .NET (aspx) implementation, is it?

JDooley

<!-- Web.Config Configuration File -->

<configuration>
    <system.web>
        <customErrors mode="Off"/>
    </system.web>
</configuration>

<!-- Web.Config Configuration File -->

<configuration>
    <system.web>
        <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
    </system.web>
</configuration>

I just finished implementing the V7 product on our site and someone made mention that on the profile form where you are asked all your personal and user information there are 2 fields for passwords.  The first field uses masking to hide the password as you type it, where the second shows it in clear text.

Now we know that the only people able to see the password are the user and the administrator, but it is playing mind games with my users as they think there is a problem with the application.  I am not a programmer (however, learning ASP slowly now!) and am not sure if you did this on purpose or if it is a bug?

If it was done on purpose, can you advise how I can make the confirm password field masked as well to eliminate the unfounded questions!

Thanks

No luck...this is the message

Return To Import / Export Screen.

Active Server Pages error 'ASP 0113'

Script timed out

/members/aspprotect/password_admin/upload_post.asp

The maximum amount of time for a script to execute was exceeded. You can change this limit by specifying a new value for the property Server.ScriptTimeout or by changing the value in the IIS administration tools.

Does emailing work under the simplest scenario ? (directly from the users screen)

Thats the way to test it..

All that error means is whatever reason the settings you have chosen are not working. It could be the server. It could be what you chosen. (and yes I realize your pop info from outlook should probably work with the settings you chose)

Whenever I do installs I often have to try 3-5 different emailing scenarios before I come across one that works.

Each time making some changes and sending out test emails from the users screen until I get somewhere. Often time getting a working example of how your Hosting Company wants you to send email from ASP is the info to get your hands on. (what method and settings)

In this case they may have blocked the usee of a remote server and want you to use some other settings for sending email from asp. A lot of times they put that info in their help system.

If I were you I would start by trying the other two CDOSYS options for starters, and then try the remote server option again but using "localhost" as the server, if none of those work consult your host for example code and settings to send email from asp. If you still have no luck I can help for sure.

Realize too when testing the emails may take a bit to arrive. A delay of sorts. Best to type in a quick note about which method you are trying in the email text. That way when you finally get one delivered you'll know which method worked.

so, on control_pics.asp where you see

<% =TempDesc %>

you could try doing this instead

<% =Replace(TempDesc,"&nbsp","") %>

Thanks!  Will try both.

Appreciate the support.

Well, I assumed I'd be able to tweak this thing but it is all so intertwined it doesn't pay to mess with any of the files. Hence, I'm going to have buy a different system only a week or two after buying the unlimited version here.

As I leave I want to give you some impressions here. While the system is low-cost, the 99 dollar version is missing a few pieces that I think would bring the value to 99. It is one thing to talk about the speed/performance, but to a degree that's hard to measure, and to anyone with web advertising on their site, performance will always run second to potential site income.

It definitely needs a user interface and registration for advertisers, and it definitely needs a single variables file for changing the hundreds of variables for which there is no control. I had to search on my own just to change the look and feel.

Lack of multi-zone support is a serious drawback. I would submit that anyone with a serious website needs it, and will gladly pay you 139 over 99 for just that one feature.

Take them or leave them, they are just suggestions.

Hi, I have not gotten anything from you about it.

click on the PM button below and send it that way through the forums.

Thanks

Now, we can connect to the MySQL database with ASPBanner using the following connection string if we like.

"driver={MySQL ODBC 3.51 Driver};server=localhost;port=3306;uid=root;pwd=temp;databas e=aspbanner;option=16386"

But we really do not want to connect to the aspbanner MySQL database using the "root" account

So, lets make an account to use..

In MySQL Administrator select "User Administration"

Down below you will see the user "root"

Right click on "root" and select "Add new user"



Type in a New MySQL Username and Password

I am going to call my new user "aspbanneruser"

Hit the Schema Privileges" tab



In this case since I am using the root account to manage my MySQL system I am just going to give this new user account what it needs to use the aspbanner database.. you may want to apply more permissions to the new account, that is up to you.. I am giving the new user (select, insert, update, delete, execute) So I right click on the aspbanner and then bring over the permissions I need for it.. and hit apply changes down in the bottom right.

We can now connect to the aspbanner MySQL database using this new account like so.

"driver={MySQL ODBC 3.51 Driver};server=localhost;port=3306;uid=aspbanneruser;pwd=tem p;databas e=aspbanner;option=16386"

------------------------------------------------------------ -----
article still in the process of being written (3/14/06)

OK, thanks.

Nick

I log all 404 errors on my site and since installing ASPBanner, I get a lot of the following error:

/aspbanner/edit_banner.asp?Banner_ID=11&User_ID=1 contains a broken link:

/aspbanner/right1.gif

ID changes and there are various missing links.  Some missing links include:

/aspbanner/drop2.gif
/aspbanner/left1.gif
/aspbanner/right2.gif
etc.

While not critical, these are filling up my error logs and it takes time for me to sort through them.

Banners no longer show up on my site ?

If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.

The web server must have crashed or lost power and now the application variables are in limbo/not working.

I have seen this happen a few times.

Basically the application variable system gets messed up because it was not shut down properlly.

The way to cure it are as follows.

Edit and save a banner in the system. Hopefully that gets things going again.