Chris, that fixed it.  Found 2-references to guestbook2 in the file show_messages_inc.asp located in the \guestbook\ directory.

Suggestion for future release.  Create an option to email the admin when a message is posted.  If this code already exists please advise.

Thanks, Lance

Need to know more about ASP ?
Check out these links.

	PowerASP This site was started on October 8th, 1998 and is a great resource.
	ASP101 This site has been around a long time.
	ASPSchools Intro to ASP Good intro to asp

15 Seconds Free resource for developers working with Microsoft Internet Solutions. 15 Seconds is the biggest IIS and ASP development resource in the world.

ASP FAQ Have a question about ASP? Check the ASP FAQ site. They've probably got the answer.

ASP Free Your 1st source for free ASP and ASP.NET live demos, downloads and more!!!

ASP Connections ASP Connections Conference for the ASP Developer features sessions on ASP Performance, IIS 5.0, ASP 3.0, XML, ADO, E-Commerce, VID, COM, COM+, MTS, DHTML, load balancing, and more. Speakers include Mike Amundsen, Wayne Berry, Charles Carroll, Michael Corning, Jeff Niblack, & Ken Spencer.

4GuysFromRolla 4GuysFromRolla: Web Technology, Programming, Humor... All this and it counts as work!

CoverYourASP.com A great new site. It's got some great stuff and is using JScript! A must see!

askASP Promising new site! Check out the question archives!

CodeHound CodeHound ASP - The ASP Developer's Search Engine!

CodeAve.com A neat ASP reference with some interesting features. Check out their "Script Writers"

ASPZone The website for advanced ASP developers.

Programmer's Resource This site is geared towards Activer Server Pages and Access developers.

Planet Source Code Search over half a million lines of free code!

DevASP A relatively new ASP site. Straight forward and informative.

www.LearnASP.com This in another site maintained by Charles Carroll, and it specializes in Active Server Pages programming issues. Contains links to a wide range of resources and articles.

ASPin.com The ASP Resource Index. Here you will find the stuff you need to take advantage of ASP and make your website an interactive mecca.

411ASP.NET The ASP.NET Resource Directory

ASP Sites A great place to go to find ASP resources fast!

Haneng.com A different ASP site.

Macromedia - DevNet While much of the content is Dreamweaver MX-centric, they also have a fair amount of plain vanilla ASP.NET content as well.

The Web Developer's Virtual Library The WDVL is part encyclopedia and part e-zine dedicated to covering all sorts of information about developing web sites... including ASP.

 

pretty clever...

If anyone is interested in what the Mod function actually does this article explains it nicely. They even use it for the same purpose in the examples.

http://www.asp101.com/articles/steven/mod/default.asp

so use the connection string the readme.txt in the sql installation folder file tells you to... it has the correct username.. I just posted that info above

or change the username in the connection string so its rigfht

or go into sql and give any user you want access to the database and use them

Any connection strings that come in the datacon_inc.asp file the way it ships are examples. We fully expect people to edit them.

Also.. the SQL scripts primarly goal is give you a properly set up database with correct files and table settings. Users and permissions often need a little extra attention from the installer as that part doesn't always get set right by the scripts It really all depends on what sql user you are when you execute the scripts. Many times the user someone logs in with doesn't have permission to make users and set permissions.

I was actually able to do similar thing by allowing our dedicated search engine to access the site unchallanged.

<%
If Trim(Left(Request.ServerVariables("HTTP_USER_AGENT"),11)) = "MYPASSWORD" Then  
 SearchFlag = True
End If
 
If SearchFlag <> True Then
If Session("Access_Level") > CHECKFOR or Session("Access_Level") = "" Then 
%>
<!--#include virtual="/Auth/check_user_Code.asp" -->
<head>
<title>My Title</title>

</head>

<body>

My Protected stuff here

</body>

</html>

For this to work, the search engine must pass the PW to the web site. I just was not sure how to do the same thing with IPs. I will play with the code and see what happens. If it works, I will post it here to help others, if this is OK with forum rules.

Thanks,

Mo

[/QUOTE]

I just added couple of lines and it works fine

If (Request.ServerVariables("REMOTE_ADDR")) = "xxx.xx.xxx.xxx" Then 
 ' Session("PasswordAccess") = "Yes"
 SearchFlag = true
End If

I've downloaded this neat little app, but I'm having troubles understanding what I should be using.  Cassinni or IIS, can you help?  I've tried to look at the help, but it is very vague on what to use in each situation. 

Any help is appreciated. 

Cheers

really all depends on the sql connection string you are using and the names of your sql user you are using...

you really havent described very much..

I'd double check all of it.. something is wrong

We would like to use some of the variables from the user account in our web pages after they log in (something like, 'hello <user>"), but for professional printout reports using company name and user.

Could you offer some help as to what variable string we use to print that information on logged in pages?

By the way,  the program is working great!!!

I wonder what that ENDSQLMail send failure is all about ?
I dont use anything regarding SQLMAIL in the ASPProtect code.

I think I might need to go in so I can debug a bit. Everything seems to work fine with a SQL installation here so I just don't know at the moment.

If that is ok with you I would need ftp access or something so I can trry a few things and hopefully figure it out. Admin access to the aspprotect admin area as well so I can see what you have set up in there.

PM me with that info if you want me to take a look.

sure (XP PRO), see my article on that

http://www.powerasp.com/content/new/windows_xp_pro_and_permi ssions.asp

Please be aware folks..

This file is not provided by CJWSoft. Though this may work very well use of it is not supported in any way. We have not tested it.

This user is not using the option pack so this file will not be compatible with anyone using that because it does not have support for groups and some of the other new features.

Regardless..we appretiate users sharing ideas and solutions that they have come up with.

I think you getting all confused about dsn's and what they really are.

A system dsn gets created via the ODBC control panel and gets listed there. A system dsn is nothing more than a registry entry telling information about where the database is an how to connect to it. Then every time code accesses the database it has to do a registry lookup. The whole process adds a lot of delays, causes very poor performance and is unnecessary.

A dsn-less connection simply connects directly to the database by specifying the driver being used, where the database is, and some other information like the password if there is one.

To get aspprotect or any other ASP application using a database all you have to do is make sure the database folder has correct permissions and then make a connection string like so. (with the correct info for your directory structure of course)

DBQ=c:\inetpub\wwwroot\aspprotect_6\data\database\ASPProtect _access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp

If you are wondering Access databases always use the same username.

So, basically if permissions are set correctly and the directory is valid it will work.
It is really that simple. 99% of the time when people have problems it is one or the other.

That being said, don't worry about the odbc control panel and what is listed there for connections. All we really care about is that odbc drivers are installed and somewhat current.


One last thign for reference: even if you do make a system dsn the database folder still needs the correct permissions.

Christopher,

Thanks for the reply. I think I've found my problem, but can't test until later in the evening as it is on a live site.

Darrell

how di I change the currency dollar sign to gdp pound sign ?

I need all my tranactions in gdp puund sterling to use on paypal

regards

simon

I'm having an issue importing. It moves the images from the /import folder and creates the thumbnails with no problem, but the full-size photos all have a size of 0 bytes.

http://www.larrysampas.com/gallery2/default.asp?CatLevel=2&a mp;Cat1_ID=1

At one point I was using CDONTS_Installed but since I moved to a new Windows 2003 server I was told by my ISP that either one of these will work

I encountered a problem that I haven't been able to solve. I'm trying to get .pdf files to byte serve (page-by-page load in the browser) but unable to do so. I've narrowed it down to stream download file where it creates the header object. I haven't made any success with the changes I've tried. Any help would be very nice.

This maybe useful:
http://msdn.microsoft.com/library/default.asp?url=/library/e n-us/act/htm/actml_ref_href.asp

I have narrowed it down.  The ../ for includes will not work with .asp files but will work in .shtml files.

any ideas?

Did you see this thread. It shows how to set up the project in Visual Studio in detail.

http://support.cjwsoft.com/code/moreinfo85-1.htm

Things have now changed I found out godaddy has persitis aspUPload and aspjpeg as value added products, I have the aspjpeg working but have been unable to upload when using aspUPload, everything works fine with the vbscript method so I think my permissions are correct. Whenever you get a chance, any help would be appreciated.

Thanks

Mark

Hi,

Ok, well... you have a lot of stuff going on there.

More importantly than that.. you cant even log into the admin area using the admin account. There is something majorly wrong with the installation.

I also notice you havent even saved any path settings in the settings page of the admin area. I am looking that over now and filling in the missing info. That information needs to be populated.

so, on control_pics.asp where you see

<% =TempDesc %>

you could try doing this instead

<% =Replace(TempDesc,"&nbsp","") %>

I just upgraded from 6.0 to 7.0 primarily because we were limited in the choices of email systems we could use to send an email validation message.

Previously, with 6.0, we were using CDONTS to send an email validation message to new registrants. Unfortunately, AOL email addressee's were not receiving the vaildation email from us. I received a reply to another post I made on this forum that the problem was due to the fact that aCDONTS generated email has no MX record and AOL blocks non-MX record containing emails.

Well, I upgraded to 7.0, switched to CDOSYS (Using SMTP Virtual Server) with SMTP Authentication and it appears that AOL is still blocking the validation email.

Any suggestions, comments?

I just added this line to the paypal1.asp page

<input type="hidden" name="currency_code" value="CAD">

and it worked.  Clearly other values can be entered for other currencies.  Everything was listed in this manual https://www.paypal.com/en_US/pdf/subscriptions.pdf.

Cheers
Roy

Update..

I have support for the ibulc image uploading client working.

http://www.ibulc.com/

There is also an option in asp photo gallery pro to store the images original filename in the description field which is pretty cool.

Ibulc client bulk upload support currently only works with the pure vbscript upload or the safileup component. (I may support the other two components asp photo gallery can use but it really depends on time) The pure vbscript upload code I am using for this is much better than the code I was using before so that method should be offer decent performance for anyone though using a component is always better.

I still have to add the ibulc feature to the users side. It currently all only works for an admin user.

The whole process is very cool. You install the ibulc client on you computer. It's tiny, and free for uploading up to 10 (100kb) pictures at once. You have to by a domain license from them to do more than 10. Anyway.. it lets you select multiple pictures off your hard drive and it then uploads them all at once with individual progress info for each picture. Its really cool and since it really treats each picture as an individual upload it doesn't hammer the server with one big upload at once.

I also made it so you can start the picture uploads at any picture number.
So if you already have pictures in an album you can add more without losing what is already there.

This was one of the main features of the new version and now that it is working hopefully I can tie up any loose ends and get the new version out soon.

How can I make so it goes to certain webpages if user enters valid username and password??

I suppose user enters its information on check_user_inc.asp page, and username and password are stored on SQL database.

Thanks