UPDATE

Version 8.1 has code generators for these new methods built in...

These are 4 valid examples of calling a flash movie.

The more simple examples may cause problems for people that don't have the flash plugin installed. I really do not know as I am no flash expert. All these work fine for me. Of course I have the latest flash plugin installed. Perhaps some of you can shed some light in this. The 3rd and 4rth examples are obviously only slightly different and mention different versions of flash as far as downloading the plugin goes.

<EMBED src=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf" WIDTH="468" HEIGHT="60">

<object width="120" height="22">
<param name="movie" value=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf">
<embed src=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf" width="468" height="60">
</embed>
</object>

<OBJECT classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase=" http://download.macromedia.com/pub/shockwave/cabs/flash/swfl ash.cab#version=6,0,40,0"WIDTH="468 " HEIGHT="60" id="myMovieName">
<PARAM NAME=movie VALUE=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf">
<PARAM NAME=quality VALUE=high>
<PARAM NAME=bgcolor VALUE=#FFFFFF>
<EMBED src=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf" quality=high bgcolor=#FFFFFF WIDTH="468" HEIGHT="60" NAME="mybannername" ALIGN="" TYPE="application/x-shockwave-flash" PLUGINSPAGE="http://www.macromedia.com/go/getflashplayer">
</EMBED>
</OBJECT>

<OBJECT classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase=" http://active.macromedia.com/flash2/cabs/swflash.cab#version =4,0,0,0" ID=banner WIDTH="468" HEIGHT="60">
 <PARAM NAME=movie VALUE=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf">
 <PARAM NAME=quality VALUE=high>
 <PARAM NAME=bgcolor VALUE=#FFFFFF>
 <embed src=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf" quality="high" bgcolor="#3CBDCD" WIDTH="468" HEIGHT="60" TYPE="application/x-shockwave-flash" PLUGINSPAGE=" http://www.macromedia.com/shockwave/download/index.cgi?P1_Pr od_Version=ShockwaveFlash">
</OBJECT>

this error really does not mean anything specific

Your browser must support a standard called RFC 1867. Please check with your browser vendor for support of this standard"

If you get an error its real weird that the file is being uploaded.
Generally if you get an error during upload it is because of one of these 3 things

Invalid physical path specified

Unsupported upload method chosen

Permissions

See my article on XP and permissions
http://www.powerasp.com/content/new/windows_xp_pro_and_permi ssions.asp

many people dont do their permissions right on XP Pro and that article covers everything

New Version 8.1 Released

Whats new..
http://www.aspbanner.com/v8_notes.asp

Upgrade Instructions...

Upgrade at your own risk. Though we try new versions are not always perfect due to minor bugs we may miss.

Back up your old setup so you can revert back if necessary..!!!
Save your data connection string info in a text file so you have it.
You can get that by viewing the system info page in the admin area.

Carefully copy all the ".asp" files from the new version to the old.
Your going to want all the .asp files in the aspbanner folder.
Your going to want all the .asp files in the aspbanner/scripts folder

Copy the aspbanner/images folder because there are some new images

Be sure to also copy the "data/config" folder files.folders as well as a lot of that is new including the actual config file. If you dont get the new config file copied in there you will have problems later on with some of the new features.

Be sure to create a new folder in the "data" folder called "tempstats"
Make sure it has proper permissions if you plan on using the delayed stats feature as the stats gets temporarily stored there. 

Go back to the area where you originally setup the data connection and do that again...

From the web browser run the following URL

http://yoursite/data/config/aspbanner_unlimited.asp

Replace "yoursite" with the proper url info relevant to your web site location.

When run via the web server that page will ask for a password. By default it is "temp". You should change it later on for security reasons. That page tells you how.

Now... moving on..

There were no changes to the database except for SQL Server users so you can use your existing database.

SQL Server users that want to use the new stored procedures feature (it's optional) will need to update their SQL database with the stored procedures.

Scripts to do that are provided.


ALSO: I have been running this new version using SQL Server Stored Procedure mode for a 1 week on a special banner server that serves banners to many of my own sites. I have also been using the new Delayed Stats feature.

All I can say is it is running like a champ and the SQL server is using less memory than it ever did before.

btw: who is this hosting company anyway ?

and did they give you access to a control panel that lets you manage your site ? sometimes that is where you manage those permissions if their interface supports it

lastly, are frontpage extensions installed in your web so it can be connected to via frontpage ?

this issue has been resolved.. see following thread

http://support.cjwsoft.com/code/moreinfo316-1.htm

and the permissions, how exactly were they set ?
I find a lot of customers think they are setting permissions correctly when they really are not. That's why I wrote that long article on the subject.

As you probably know a data connection is a very low level thing. It is the foundation of any ASP application that communicates with a database. Unfortunatly it sometimes takes a while to get the hang of setting them up without issue.

Everything must be perfect.. the ODBC drivers must be up to date, folder permission are critical, sometimes you must use a new version of the access database.. etc etc etc  The errors and things that happen when all these things are not perfect and not helpful as you have found out.

I would suggest you download and get ASPTest from CJWSoft running before you go any further. It is designed to be as simple as possible and helps get a hang of the database setup process.

I have been having some display issues with the .NET version of ASPBanner.  I set the size of the image, and I set the size of the banner and there is still white space above and below the image.  I am not using a text link below the banner, so I have it set to blank.

Here is a link to my page. 

http://www.nababaseball.com

Two of the three banners in the rotation on the main page have non-white backgrounds so it's easy to see the issue I'm talking about.

Is there a way to tighten up the formatting so that the image fits onto the page in the size specified?

JDooley

Hi

ASPBanner is great...

I have a little problem I have a ASP site http://www.bythebeach.com.au/

I understand how Zones (location on a pages) works but i need only to display those banners that pertain only to that catorgries or sub catorgries.

How would i do that would ....  Would i have to add a new field in the database...?

Any help would be greatly apprecaited

regards

Domenic

Sydney, Australia

Can we get access to the source project files for ASPProtect.net since we'd like to put in some of our own branding on the pages and not everything can be done in HTML.

Thanks

Hello,

You'll need to find a validation function to test for it.
Either server side or right in the form via client side javascript.

I dont have any experience with validating zip codes here much less UK.

Google it would be my best advice.. or maybe find some free app written in UK format and see how they did it.

Good Luck..

And if ya find anything post it here if ya like

ok.. the count your talking about wont increment until someone other than you views the page.

After that you can increment it one time...

It keeps track of the last IP that hit it.. if it is the same it doesn't increment

This is all by design...  so the same person doesn't increment the count over and over..

It's simplitist and it can be tricked... but it does what it needs to do 

[QUOTE=cwilliams]Humm, Did you make any changes to the code ?
Solid Black is not the default so it must have changed at least once.[/quote]

I did change the top_logo.gif and the associated link. That was on the default page not the Solid Black skin which is unchanged. After downloading/uploading the skins I tried changing it to one of the Beach skins and that's when it changed to Solid Black and has been stuck there ever since.

[quote]Otherwise it might be some sort of application variable problem.
I would make sure the web is and "application" in the IIS console.[/quote]I don't have access to the Microsoft IIS console as this is a host site. I can access the site's "control panel" but it does allow for those type of settings. Mostly just permissions, DSN entries, etc.

Thanks.
Al

Different Versions of the Access Database

Below is a zip file with many alternate versions of the Access Database provided to help with installation and general usage.

2005-02-20_155310_ASPProtect_Database_Versions.zip

ASPProtect.mdb is saved as an Access97 database (password "temp")
ASPProtect_access2000.mdb is saved as and Access 2000 database (password "temp")
ASPProtect_access2000.mdb is saved as and Access 2002-2003 database (password "temp")
ASPProtect_access2002_no_password.mdb is saved as and Access 2002-2003 database with no password set on it

Try to use the newest version as server odbc drivers sometimes have to use the newest version for everything to work correctly. No password version is provided because sometimes there are issues connecting to a database with a password set on it.

Default username for access databases is of course "admin" but you really dont use that except in the data connection information.

far as I can tell it does... that session abandon thing called in the logoff page should be enough to cover everything

once thing to be careful about

If you log in.. then log off... then go back to a page and do a refresh... you  may in fact be reposting the username and password from before.. thus logging yourself right back in

Perhaps not.. all depends on what your doing... but it is something to be careful of when testing 

i will probably end up doing this myself, but dropping all the log data in a sql table would be nice as it offers much more flexibility on how an admin can keep track and use the data. Browsing through each log file is very inconvenient. I can search for text in the files (server-side, others with a shared server would probably have to separately download all log files first), but with the current method I don't have the following important options:

• cannot sort by any criteria
• quickly see a list of all login attempts by a specific user (i need to search each log file individually for this info)

if you had an option during setup perhaps (or elsewhere) in a future version that allowed an admin to specify the preferred logging method (separate files or a table in sql) i'm sure many admins would find it very useful to have a database alternative of keeping track of users becuase it would offer the two benefits listed above, plus more.

actually  I just went to it again and it was somewhat slow coming up this time..

perhaps you have some issues with the sql database.

it should be instant.. like this one I run on my server
http://banserver.powerasp.com/aspbanner/

I suppose it could also have something to do with sql server resources but its hard to say..

Session.LCID = 2057

If you still cant see the upload buttons after checking the settings send me a PM with the info and I will take a look at your installation. It will have to be up on a live server of course.

No can do.  In both cases there is an icon that says "Not uploaded".  I click in it and nothing happens.  There is no link to upload.  Am I missing something?

By the way, I appreciate and am impressed with your rapid response. Thanks.

Thanks!  Will try both.

Appreciate the support.

Hello

I have a strange problem with the thumbnails in the ASPClassifieds.
If i upload some pictures in an ad, the 2nd picture always shows with an x, as the picture doesn´t exists. But if i click on the 2nd thumbnail, the picture shows okay. I haven´t changed enything from the original code.
Does anyone have any idea, where it goes wrong ?

With best regards, Erling Larsen

ok, I moved this thread..

The code in the ASP application handles all encryption and un-encrpytion of passwords in the database. I uses the vbscript RC4 function and the password encryption key specific to your installation to do this.

The whole idea is that if someone gets your database and opens it up that they will not get the passwords (utilitiies to crack access databases are common and work well so they can easily get by the main password)

That being said when you open the database manually your not supposed to see clear text passwords. Your also not supposed to have an easy way to make them clear text. It's a security thing. 

Though I am not officially supporting it I will tell you what I think would be the easisest way to make an export file with clear text passwords in it.

Use the export fire creator in the admin area of aspprotect.
Mosdify "export.asp"

change

Password = CmdDataExport("Password")

to

Password = RC4(CmdDataExport("Password"), PasswordEncryptionKey)

Then make an export file and see if that worked.
you can then import the export file into and access database or do whatever you like with it.

perhaps the filesystem object is disabled on the server ?
or some sort of script blocking is running and causing a problem ?

other than that I can take a look if you put it up on a live server.

I have tried everything to get your CJWSoft code working..I purchased the auto listings software and I am stumped, and actually you stumped my hosting provider, my database is stored in the database directory on the root.

I have even tried your ASPtest and still cannot connect.  My have connected other databases without an issue on this same host, I have named a DNS Auto for my database and ponted to that in my code  but get the following error you see at http://www.burkesauto.com and even when i try you test script found here at http://www.burkesauto.com/asptest.asp .

It's custimization work. and just not something I can support.
Basically it is basic ASP/Database work.

Something you kind of need to figure out on your own. It's not difficult work for a good asp coder but there is no easy way and it is time comsuming.

I wouldn't use the custom fields though. I would make your own.
It's simpler that way.

I purchased two site licenses for ASP Protect a while back and am now trying to implement the application.

The connection to the database is fine, because it recognizes the user and displays the user name.  However, there must be a problem with the permission because I get the DNS error information from the On Error in the check_user_inc.asp file.

I set the permissions on my PC as you indicated, both on the folder and the database file.  But get the error and cannot access the database to view or modify.  I also uploaded the file to my web server and set the permissions as well, but get the same problem.

You mention on your forum that it is not the code, but I don't understand if the code is correct and if it finds the database and the permissions have been set as you indicate, why doesn't the code work?

Thanks Chris.

Your solution worked!

Thanks very much for the quick reply.

That sets my mind at ease

I was just worried if users would see warnings in their firewall software too.

I realize that the admin would have to have to go through some errors...

And since we are throwing things in here... Definately, if you have your own server you need a Hardware Firewall and a Managed one at that. The internet can be pretty dangerous for business if you don't.

Plus, I agree Black Ice although in it's heyday a few years ago was considered great. It is not suitable for todays standards alone even for the normal user (But, it is required by the company I work with for VPN. I think it's stupid too using old technology. I have 2 more firewalls setup besides that just so that I do have some security. And, that's just for my PC)...

Thanks 

I have just purchased ASP v7 and loaded.  Followed instructions.  Obtained codes not prob.  Get to single field login screen, enter password and following page appears:

Method Not Allowed

The requested method POST is not allowed for the URL /temp/aspprotect/password_admin/get_me_in.asp.

Added folder aspprotect under (temp web) folder - temp, but also tried under root folder of web site.

Still no luck.