Thanks

It wasn't a complaint. I just bought it last night and installed it today. But, I must have missed the part about requiring Enterprise Manager for installing it on SQL.

If you want it the link to the Web Based SQL Manager is : http://www.aspenterprisemanager.com/ which is free and the Trialware that I tried is EMS SQL Manager.

Maybe that will help a little in not requiring that people have an MS SQL license to access their hosted MS SQL to install the software.

Thanks

it has been 3 days since I logged myself in under Admin, and all the user information on the User Activiy screen seemed to be gone.

is there any specific length of period it refreshes its user information??

Hi

I've tried almost anything here... I'm using an online SQL SERVER database with ASPProtect 7, and I can't login after my initial creation of the admin account.

It works fine with Access... I believe I have checked all the fields created by the sql statement (which was run with no errors),

What could be the problem here? could it be a problem that I run my local IIS against the online sql server?

sincerely,

Morten

I have a customer who is asking the following:

... could you make a link from it to our website and is there a way to see what traffic goes from us to them.  They are going to pay a commission on sales, however I need to be able to track who views their site...

Wishful thinking or could you add code to track their IP address and display in the report section?  Not sure that would be enough to satisfy this request.   Suggestions?

Thanks, Lance

I did all that you sugessted and all failed, you  said "I did a sign up.. your verify URL is not saved/set in the application variables. is this somthing I can change manually?  below are the steps I performed......

1 - made sure the web is it's own application in IIS

2 - Reset IIS in command promt

3 - Restarted the server, the only thing is I have not waited perhaps long enough for it to kick in. but it should have with the restart.

I am running windows 2003 on the front end with wondows 2003 and Exchange 2003 on the back end, is there anything else that may be causing this issure?

Thank you!

Matt...

Where is the system getting the random user name and password, and why does it keep selecting the same user name and password every time?

When a new user adds themselves to the db thru the registration page, no user id is assigned in the User_id field.  I can't access the page on-line due to an user_id related error on the page.  I must use access itself and add the user id.  After that, everything works as expected.

What have I done?

Tell tell me some info about your install?

How am I supposed to know what is going on when you are not showing me what you have in your web config file and also the directory structure of the install or what you are putting in a page you are trying to protect ? It almost sounds like you are not editing the paths correctly in the various places.  I mean yes you told me something about the "map" folder but what I saying is tell me more detail.

BTW: this is a very important setting in the web.config file and must be edited accordingly so the path is right.

<forms name=".aspprotect~net" loginUrl="/aspprotectlogin.aspx" protection="All" timeout="60" path="/" />

Basically your showing me random errors and posts left and right and I honestly have no idea what your doing ?

Ulitmately though I am trying to help you in this situation like the web site says.

We offer tech support for installation of the base application purchased in it's native form. In some cases in order to receive proper tech support your application will be need to be installed on a live server on the Internet. We simply cannot troubleshoot all issues when the application is only installed on your local machine.

Meaning I am not going to keep this up if you keep asking question after question after question regardign your local XP Pro installation. There is only so much I can assume or guess when you are running this on a local development server. I know you got all sorts of problems getting a decent live server to run this on but that just isn't my problem. Get this up and running on a professionaly and correctly setup live server and when these random configuration errors pop up atl least I can go run the pages and look at them. Right now I am just confused by nearly everything you have posted today. Half of looks like basic ASP.NET path issues that you need to sort of on your own based on where you installed the application on the machine and what you have in the web.config file.. etc etc etc

It is sounding more and more like ASP.NET is way over your head. If you want a copy of the classic ASP version of ASPProtect you are welcome to it. I think you will be a lotter better off sticking to classic ASP unless you really start reading up on ASP.NET and learning more about how forms based authentication and the web.config file work.

Using "Email Authentication" as a registration option you cannot do that. There is no possible way I know of to have a delay on the authentication email like that. Also that method is not intended to involve any sort of manual registration like what you are doing.

Because you want to review people manually you need to change to registration process to "manual" and then send the email out manually from the users screen after making a user active.

Hello,

My guess your having trouble setting up a system dsn because the database has a password set on it. Your hosting company most likely sets up DSNs without using the advanced tab which is where the authentication information goes. Or they have some sort of web interface for the customers to use that doesn’t allow setting up that information.System DSN’s are actually difficult to set up correctly when the database has a password on it. There is of course a password on the database for security reasons so if someone ever downloads it somehow they will not get your information.

System DSN’s are not the way to go regardless as you will see mentioned at our support site.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=9&P N=1

You really should try setting up a DSN-less connection. It is the best way to go. They are easier to set up, perform better, and are less load on the server. Any host that wants it customers to use system dsn’s is not on the ball as far as server performance and server resource conservation goes. They are really asking for trouble down the road.

All you need to do to make dsn-less connection is the following.

Get permissions set for the folder the database is in (by your host)… then figure out the physical path on the server to the database by using server.mappath or you simply ask your host for the info.

An article I wrote on using server.mappath

http://www.powerasp.com/content/hintstips/physical-path.asp

Then your connection string will look something like this.. (of course you edit the path to match what server.mappath tells you. And you make sure the database name is correct)

ListingsConnectionString = "DBQ=C:\Inetpub\wwwroot\asplistings\_database\asplistings_ac cess2000.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

Another option would be to simply remove the password from the database using MSACCESS.. then try to connect to it using a System DSN without the password. If your host is storing the databases outside of your web in the root of the server then removing the password on the database is not that bad of a thing to do as there is no way anyone will be able to dload it from your site. Of course there is a still a performace loss when using a system dsn with an Access Database

Hi

ASPBanner is great...

I have a little problem I have a ASP site http://www.bythebeach.com.au/

I understand how Zones (location on a pages) works but i need only to display those banners that pertain only to that catorgries or sub catorgries.

How would i do that would ....  Would i have to add a new field in the database...?

Any help would be greatly apprecaited

regards

Domenic

Sydney, Australia

If you can would you do it for a price as a mod or will this be added to the new version.

ACCESS DENIED

INVALID Username & Password

Username HAS EXPIRED

Thanks for that.

I have tried InStr("*2*",>"0") in the query design window but it does not return any members.  

I have orded a Access Bible to help me in furture

Just an update,,,

the permission were all correct.... i left it and tried from my pc at work and it works fine... so i dont know what hahhpened.... thansk for your quick response

regards

Domenic

Sydney, Australia

Line 409:
Line 410:
Line 411:		<authentication mode="Forms">
Line 412:			
Line 413:			<!-- DO NOT CHANGE UNLESS INSTRUCTED TO DO SO -->

Banners no longer show up on my site ?

If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.

The web server must have crashed or lost power and now the application variables are in limbo/not working.

I have seen this happen 3 times. Twice on my own server when the power went out for 2 hours and once on a customers server.

Basically the application variable system gets all messed up because it was not shut down properlly.

The ways to possibly cure it are as follows.

Edit and save a banner in the system. Hopefully that gets things going again.
If not... keep reading for the more drastic cures..


Go to the command prompt on the server and type "iisreset"
Sometimes that is enough.

Reboot the server.
Sometimes that is enough.

Stop the web in the IIS console.
Sometimes that is enough.

Stop the individual processes for each web in iis
"you must really know what you doing and be very careful about doing this"

Remove and recreate new applications in IIS for the web in question.


And sometimes it just takes a combination of the things listed above and a few reboots. I don't know the best way to cure it but I do know why it happens and the steps listed above can get things back on track.

Again, this is because the server lost power or crashed as far as I know.
It was not allowed to shut down properly which sometimes happens.

You'll know things are ok again when you see your banners show up on your site.

ADODB.Recordset error '800a0cc1'

Item cannot be found in the collection corresponding to the requested name or ordinal.

/aspprotect/password_admin/default.asp, line 287

I'm doing an upgrade from an OOOOOOOOOOLD version (not sure if it was 6 or not) and it read my database OK prior to adding a new user. Now I get this error message. I was able to run the password encryption function OK, but I still get this error when I try to view the password_admin stuff. I can log in via the "get_me_in" asp page just fine, but I get the above error.

If I try to log in with my admin account, I get

ADODB.Recordset error '800a0cc1'

Item cannot be found in the collection corresponding to the requested name or ordinal.

/aspprotect/password_admin/check_admin_inc.asp, line 166

*****

OK, my question is this... if I retype all the info from the old DB into a brand new one, never before used, that would work, right? I only have 108 users, so that's about an hour of work. Or is there a 5-minute fix that I can try? I've done some messing around that got nowhere and returned all edited files to their original state, with the exceptions of the ones calling the DB location.

I'll start the C&P process and await your reply...

On a side note, I really love the new format and am excited about the new features. I'm not married to upgrading the DB and if copy and paste is faster (I just need first name, last name, username, password, email, and expiration date), then I'm using v.7 that much faster.

thanks for posting this... Since "private" is the default setting from what I read and setting it to "public" cured the issue chances are leaving it at "public" is the way to go.

http://msdn.microsoft.com/library/default.asp?url=/library/e n-us/iissdk/html/33f2780a-eee8-4601-84b7-b489e4c756df.asp

http://www.w3schools.com/asp/prop_cachecontrol.asp

ALSO: since you are one the few people that has ever contributed anything helpful to the forums I am going to reward you with a free copy of the password expiration mod. I am sending you a PM with the download info.

It's custimization work. and just not something I can support.
Basically it is basic ASP/Database work.

Something you kind of need to figure out on your own. It's not difficult work for a good asp coder but there is no easy way and it is time comsuming.

I wouldn't use the custom fields though. I would make your own.
It's simpler that way.

ok...

you got problems if you cant import a file created by the system..

You using SQL or MSACCESS and do any of the users data have apostraphes in it ?

ok.. so we got an NT server with a 486 with 256 meg of ram. 

hehe  sorry

anyway.. I have the system running without doing any importing and WOW is it chugging.. I mean it takes a while even to edit/save a user

good news is the filesystem object works as I wrote to a text file

this may end up being a simple case of lack of horsepower..

we may need to do the importing on a faster system and then take the database over cause everthing I see on your server looks correct

even so aspprotect is running so slow.. I have never seen it chug like this

I even tried connecting to a 2000 version of the database and no difference.

I am not totally sure what is going on but the server resources available are scaring me... however this could be something new in the code that I never got a chance to try on NT server.. I dont think so though

how does your other stuff run ?

static pages that do not access a database seem to serve up quickly.

are you running any other dynamic code ?

I've downloaded this neat little app, but I'm having troubles understanding what I should be using.  Cassinni or IIS, can you help?  I've tried to look at the help, but it is very vague on what to use in each situation. 

Any help is appreciated. 

Cheers

People who have the option pack have a new feature called groups.

Groups are meant as a replacement for using the access levels as they are much more powerful. Support for pages protected using access levels is left in tact for backward compatiability for a customers older protection code.

A customer recently told me groups could not be used like access levels and that 8 access levels was not enough. This is how I explained that groups can do everything access levels can do.



Groups can honestly do everything access levels can do if you really think about it.
Using groups and protecting pages accordingly you could actually create a system that basically worked identically to the way the access levels works.

For example..

You make 8 groups and assign users to them accordingly

Protection code on page allows access to groups 1-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "1,2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any one of those groups would have access..

Protection code on page allows access to groups 2-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  2-8 would have access..

Protection code on page allows access to groups 3-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  3-8 would have access..