Christopher,

Thanks for the reply. I think I've found my problem, but can't test until later in the evening as it is on a live site.

Darrell

ok, 1st we need to rule out the #1 reason people sometimes think that is not working.

Is is set up never to allow the same IP to increment the count more than once in a row so when testing it is real easy to think the count isn't working because unless you can change your ip you can not increment the count more than once per album

It's a poor mans spam abuse type of deal..
For the most part it will keep some Joker from hitting refresh 100 times and inflating the count of an album.

Do you think that is possible what is happening ?

Also, here is an older thread about the same issue?
http://support.cjwsoft.com/code/moreinfo54-2.htm

You really should check out the documentation regarding the config file before you go any farther.

If the server supports ASP.NET you do not have to spend any money to have real fast loading thumbnails.


Also, licenses of ASPImage only cost 69.95 and regardless any quality host supporting ASP should have one of the 3 supported resizing components installed or else you should consider a better host like www.alentus.com Places like that have good hosting prices and give you access to 3000.00 worth of 3rd party asp components.

Please be more specific. What hit count are we talking about ?

User Logging ? Albums ? Something else ?

Please descriube the situation in detail. There are really no settings for any sort of hit count.

Hi Chris,

When I run the physical map test this is what I get:

The Physical path to this virtual website is: \\NAWINFS04\home\users\web\b2623\rh.vickery2004

Will that work correctly without a drive letter specified?

Thanks

Rhona

But can you guess as to why the following might be happening:

1) The password is still "temp", and we verified that by checking dataconn_inc.asp ; 2) People are able to place new ads, etc. ; 3) We then download the DB.  Sometimes we are able to open up the DB just downloaded with the password "temp", but only see the USERS table.  At other times, we cannot open the same DB with any password, and get a "password not valid" message even when using the password "temp".

So what can the problem be?

My hosting company uses ASPEMAIL - and I am trying to setup the mailing settings on ASPPROTECT - but cant seem to get it to work.   I've tried many different options - here are two that are the closest - but have issues:

1. If I use the settings:

email component: aspemail

Mail remote server: my internal server name

*no smtp authentication

email mail notification - my email address on my internal server

***I get the following results:

       I can get get notified when a new user logs in, email a user from aspprotect user screen if they are in my company and have a valid email -- but I can not send to the outside world - I get an relay prohibited error.

2. If i try to change the setting to use the Hosting Website email server - I get the following results:  I dont get notified when a new user registers, I cant send to internal company people - but I can send to the outside world.

**any suggestions on what to do? I'm trying to work with the people who manage the mail servers - but since I dont know anything about them - its a bit difficult.

Not really.  The way I thought activity would work is that I would always see the last 50 users.  Not sure what controls that and why I wasn't seeing it, but it sounds like it is an IIS thing and since my site is not all that busy, it will not show the users if some process has reset the numbers.  Not a big deal.

As for the log files, I think it is related to my other question regarding the export directory.  I have the ISP looking into things at thier end to see if they are doing anything that could cause the directories to disappear.

Thanks,

Dave

I had never noticed this before, but a customer sent me email to say that they had set up their aspclassifieds profile such  that they be contacted by email and not by phone.

However, in their ad, their phone number still appears. The lines in view_ad.asp that check for True values for the Contact_Via_Email and Contact_Via_Phone before displaying that information seem to always evaluate to True, regardless of their setting in the database.

I'm using an Access2000 DB for this. When I open the DB in access, I see the checkboxes correctly unchecked for phone and checked for email. However, if I do a quick test to display the retrieved values in the view_ad.asp (<%=contact_via_phone%> <%=contact_via_email%> they both display True.

What gives? I have had nightmares with Access and its weird handling of true/false 0/1 yes/no fields, but this is driving me nuts.

1) Does everything, i.e. every user, every category, every product, etc., get stored in just one single database, or are there multiple databases at work and are linked to one another?  I am asking because there is only one table in the DB, and it is the "Users" table.  So I am presuming that there must be other databases that are linked to the DB.  Is this correct? 

2) Are user-level security permissions utilized in the sample Access DB that is shipped with the software?  I am asking because we cannot seem to remove the "temp" password no matter what we try, and this is the only reason I can think of. 

I'm using the groups protect feature on my pages. None of them seem to close the session after clicking 'logoff'. I can tell because if I hit the back button and return to the group-protected page, hit 'refresh', the page refreshes, I'm not asked to log in again.

On the other hand, when I open a page that's protected by an access level and click 'logoff' (uses same logoff asp file to logoff), it seems to work fine - if I go back a page and refresh, it asks me to log in.

Just wondering - is anybody else having problems like this? Maybe I screwed something up in the few adjustments I made a while back. Any idea what it might be?

Your users with Internet Explorer may have received the "Page Expired" error.  For ASPProtect users, it happens when  the user is not logged on and tries to invoke the target page. check_user_inc.asp puts up the login form, and IE sees it as part of the target page.  Any later attempt to Back up and reload from cache gives the errror. 

Hi,

How do you know permissions are ok in that folder ?
Please tell me more on how they were set.

Please read through my article on how they are set correctly.
http://support.cjwsoft.com/code/moreinfo136-1.htm

Often times they are not set correctly or people thingk they set them somehow but in fact did not do it the correct way.

I would also suggest using the "test_physical_path.asp" page in the "extras" folder to verify if the path you are using to the database mdb file is in fact correct. That page should work whether permissions are set or not. At least then you will know if the path is correct or not and you can go from there.

Chris -

I am encountering a problem with items showing up.  When I click on a category and then select an item to view I get

THIS ITEM IS NO LONGER ACTIVE
DO NOT CONTACT THIS USER AS THIS ITEM HAS BEEN TURNED OFF
OR THE USER HAS SOLD THE ITEM.

I have verified the item has the item_active check.  For giggles, I even unchecked with the same results.

Thoughts?

a. Sorry for the missunderstanding

b . Im running XP pro and done what was explained

c. The iis stops responding - Till I make iisrest

thanks

Ran

I'am in the process of modifing registration and tieing in paypal. When I get live I will send you a link. Thanks for help.

John

The sql script creates aspgalleryuser

dataconn_inc.asp out of the box indicates aspgallery as the user.

GalleryConnectionString = "Provider=sqloledb;Data Source=127.0.0.1;Initial Catalog=aspgallery;User Id=aspgallery;Password=temp;"

It is refered to as the internet guest account but that isn't the actual username. The username is different for every machine. It usually starts off with "IUSR_" and then your machine name. "Internet Guest Account" is always the account's full name as labeled by IIS when it is installed.

Regardless,

If an account isn't listed you have to add it.

Click (add-advanced-find now) and it will list off all the user accounts on the machine

You can also click (add-advanced) and simply type in the account name or part of it.

Some more tips:

If on a local machine you always just give the "everyone" account full control which is pretty much going to make anything work.

You can also go to computer management in your server's administrative tools and view all of the accounts  and groups there under "Local Users and Groups".

Sorry about earlier post in wrong area-

I have followed instructions to set up access levels (adding the

<% CHECKFOR = "4" %>    for user level 4 for instance.) The database is connecting properly and the basic check for login is taking place, but it seems that all users have access to all levels no matter what is on the database; i.e I set up a test page with "checkfor=4" and all users have access to it, even those with lower leve access.

Any ideas?

Thanks

For all you advanced users..

Here are two examples of ASP.NET code you can use on your ".aspx" pages to call banners from the ASP 3.0 version of ASPBaner Unlimited V8

This code is not supported... and you of course must change things accordingly like the variable names and zone numbers to match the zone you want to call banners from as well as the url.

2004-08-27_153832_asp.net_examples.zip

Got any info for me on this ?

Chris

The links to view that info are on the main users screen of the admin area.

Down below...

They wont show up unless you have that stuff enabled in the settings screen as well.

Sorry, should have added,  if i change the connection string, i can also get this...

[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

Can ASPClassifieds display the ads by city?

I have a web directory that lists websites and companies by city.  Is it possible to have specific ads shown to the user depending on what city they click on?  For example, only ads in New York would be shown to users that have already clicked on that city in my directory.

thanks,

do you have the smtp part of iis installed on your machine

cdonts needs that

then again I am not sure you can even use cdonts on a xp box without making some changes...

cdonts has kinds died out and as of windows 2000 basically got replaces by cdosys

If you are using version 6 CDOSYS is not supported. That is one reason why version 7 came out. If you want to rewrite the code to work with CDOSYS in version 6 that is something you need to sort out on your own as I do not support custimization to the code.

Yeah, its working great witht he Access database. Now I just need to get it all set up. I like how the config file is set up with all the comments, it really helped allieviate the 40k thumbnails, .

yes, admins have access to absolutely anything...

as for the other question what you should do is only show links to people logged in that they have access to.. then they wont get logged out when they go to a page they do not have access to

for example if someone doesn't have access to a level 4 page dont give them a link to go there... you can do that by checking the session variables and creating your hyperlink html code accordingly .. using simple if-else logic... you could even make a hyperlink non-clickable and add some text to it like (no access)

it's all about taking the time to intelligently designing the different areas of your web site. It takes a bit of time and work to really make a system flow the way you want it to.

other than that it becomes extremely complicated to not grant them access when they go to a page they dont have access to but also keep them logged in. It is just not designed to flow that way. If someone goes to a page they do have access to they get logged out. It sort of has to be that way because of the ways things flow.

more info on accessing user info after login so you can do that
http://support.cjwsoft.com/code/moreinfo198-1.htm

another good thing to check out is the provided examples for mutliple access levels. You can see that if you log into the default page for that that it only shows you links to pages you have access to. Done with simple if-else logic around the html links. It is using groups but you can do the same sort of concept using groups.