Okay thanks, I'll have to consider wether or not to go down the path of the upgrade or cut my losses as the Access cannot handle the pressure

It's just errored out again with the following message:

msxml3.dll error '80072ee2'

The operation timed out

/forum/banner.asp, line 15

Regards,

Dave

that would probably work...

any ".aspx" page can grab that data after someone logs in..

Session("Username")
Session("User_ID")

etc etc

anything you see set in the "aspprotectlogin.aspx.vb" file will be there

any data not set there would have to be added and then the project recomplied so that data gets saved...

Microsoft VBScript compilation error '800a0411'

Name redefined

/aspprotect/config_inc.asp, line 15

Dim  Address_Required,CDONTS_Installed,City_Required,Registration _Type,VerifyURL,Log_Off_Page
----^

Yeah, its working great witht he Access database. Now I just need to get it all set up. I like how the config file is set up with all the comments, it really helped allieviate the 40k thumbnails, .

--------------------------------------------
(( TRY THIS AT YOUR OWN RISK !!))
--------------------------------------------

2004-08-19_122127_ASPBanner_V7.3_code_banner_encode_decode_m od.zip

This is an Expirmental MOD for ASPBanner Version 7.3 Only
Do not use it on other versions....

It encodes CODE Banner information before saving it into the application variables that handle banner rotation. It then decodes that information before displaying them on your web pages.

The reason for this is SOME very complex javascript does not always save correctly into the application variables that rotate banners (even when not using the JavaScript Method to display the banners)

This way the javascript or whatever you entered comes out on your web page exactly as you entered it and runs correctly.. but there is little more processing going on to handle the encoding and decoding. But its probably nothing to worry about and won't effect performance at all.

Unless your having a problem don't use this mod. It is not officially supported in any way.

-- DIRECTIONS --

( COPY THESE FILES INTO YOUR ASPBANNER DIRECTORY AND BACK UP ALL THE FILES THAT YOU WILL BE REPLACING ))
(( SO YOU CAN REVERT BACK IF THERE IS TROUBLE ))

If you are wondering if the "appinfo_inc.asp" included has the weight banner bug fix applied to it already. That is a bug mentioned in our forums

ALSO:

(( YOU CAN NOT USE THE INCLUDE METHODS OF CALLING BANNERS WITH THIS CODE ))

(( YOU CAN NOT USE THE JAVASCRIPT METHOD OF CALLING BANNERS WITH THIS CODE ))

(( USE ONE OF THE OTHER METHODS ))

Using "Email Authentication" as a registration option you cannot do that. There is no possible way I know of to have a delay on the authentication email like that. Also that method is not intended to involve any sort of manual registration like what you are doing.

Because you want to review people manually you need to change to registration process to "manual" and then send the email out manually from the users screen after making a user active.

That is by design, removing and deleting are two different things as far as the classifieds system goes.

A regular user can only remove an ad from the category index. (which makes the ad inactive)

An admin however can truly delete an ad from the system.

Okay Chris, I wold like to get rid of the encryption then if it's not too much trouble.

I have no option of running the production server against an ms access db, since the db needs to be online and accessible from another system.

Probably not... javascript calling complex javascript is not a good thing and is often a problem.

I would try one of the other methods such as the xml parser if possible.

The links to view that info are on the main users screen of the admin area.

Down below...

They wont show up unless you have that stuff enabled in the settings screen as well.

here is a thread that may help you if this is what you were getting at

http://support.cjwsoft.com/code/moreinfo389-1.htm

I just upgraded from 6.0 to 7.0 primarily because we were limited in the choices of email systems we could use to send an email validation message.

Previously, with 6.0, we were using CDONTS to send an email validation message to new registrants. Unfortunately, AOL email addressee's were not receiving the vaildation email from us. I received a reply to another post I made on this forum that the problem was due to the fact that aCDONTS generated email has no MX record and AOL blocks non-MX record containing emails.

Well, I upgraded to 7.0, switched to CDOSYS (Using SMTP Virtual Server) with SMTP Authentication and it appears that AOL is still blocking the validation email.

Any suggestions, comments?

I had both ASP Listings & Classified on the same website.  The categories seem to be getting mixed up. I removed ASP Classified but classfieds categories is still appearing in the student of ASP Listing.

How do I fix this?

Thanks

Thanks for that. The upload size is just as effective and possibly a better solution to maintain server space.

What about individual gallery permissions. So only 1 member can post in only 1 gallery. I have a forum of 500 plus members so if they want to add a gallery than setting a permission would be idea for each gallery.

Javascript Popup/Pop Under Generator

Until I have time to make one I suggest using the one on the banmanpro support site as it is pretty nice.

Just dont use option 2 on that page as that is specific to banmanpro

http://www.banmanpro.com/support/popupgenerator.asp

The main users screen... the 1st screen you see when you go to the admin area..  where you email an individual user..

The settings I am referring to being the various emailing settings on the settings screen, The settings you showed me.

As for emailing via a remote server over dsl. It may not be working because the ISP's block the port (25) to stop people from running email servers over their dsl.

Your POP3 works because POP3 uses port 110.

If you want to send emails from your local server on your dsl you should probably install the SMTP service of IIS if you have not and send emails using that with CDOSYS. Either that or get a commerical DSL account with a static IP that allows for running email servers.

I want to try this on the machine im using now; which is windows XP.

Is this possible? I don't think i can set folder permissions on XP... there is no option to do so...

Is there a way to do it?

Just got back 10 minutes ago..
Missed plane yesterday because of traffic and the flight today was 3 hours plus 4 hours of driving

The fact that you are using Server 2003 is not relevant. I am very familiar with it and all my sites run on it.

The ASPNET account will be there by default once the .NET framework is installed. It won’t just show up in the list, you have to search for it like my article mentions.

http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

thats because you can not have exchange server running at the same time as the windows IIS virtual smtp server..

they clash with one another... and thats why the emails never get picked up by the iis stmp server

you have to send the emails another way like using a true remote mail server..  I am not sure but if your exchange server can do pop 3 you can probably use that that way

you may be able to change the pickup directory that cdosys uses under the virtual SMTP scenario, but I am not sure if that will work with exchange picking it up, but maybe it will work ok because you said it does when you paste them in there manually.. I do not really know.. you'd have to try it and edit the email sub routine to use that pickup path

"scripts/emailing_subs_inc.asp" is where you could try editing that path

nope ,sql server has nothing to do with this

I am talking about the folder pictures are stored in.. it needs modify permissions set for the internet guest account like those articles talk about

do you have the smtp part of iis installed on your machine

cdonts needs that

then again I am not sure you can even use cdonts on a xp box without making some changes...

cdonts has kinds died out and as of windows 2000 basically got replaces by cdosys

My ISP uses ASPSmartMail. The email confirmation works except when I try to register an AOL user the server returns an error 500.

When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner. 

The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though) 

Really the best way to show it is with an example as seen below.

Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.

All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser, 

The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser. 

In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.



On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.

http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html

This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code. 

Weird things happening, when I upload using the vb method the image fails and error is that the image was empty.

Utilizing ASPUpload and after clicking upload file I get a blank screen, no preview, no nothing (it loads with the proper header/footer) but a completely blank body.

Any hints?

Hi,

I am just wondering if anyone else has had this problem. Even though the guestbook is empty, it takes just about 20 to 30 seconds for the guestbook/default.asp lto oad. Is this normal has anyone else has had this problem.

Thanks

Hello,

I think you’ll definitely like aspbanner. It's very easy to setup and use and it should work great with your portal. 

You’ll have banners rotating in no time. All you have to do is add banner calling code in your pages where you want the banners to show. There are enough methods that you will definitely find a few that work well for you. 

BTW, there are actually 7 methods now as we have a new one.
Information about it can be found in our ASPBanner support forums

Larry,

I have a new computer up and running and am back on the Internet full time. I am here to help when you are ready to continue with this.

I went to your site to look around and "try it" like you mentioned but I can not really try anything as the admin username/password seems to be something other than the default

I purchased and installed the full version ASPProtect 6.0 in Feb 05 (must have been just before 7.0 came out) and have been using CDONTS for email authorization during the registration process.

It was working fine for about three months. Now, after registering, the  email  authorization is NOT delivered to the new registrant. There are no error messages.It just doesn't arrive.

Any thoughts on the subject would be appreciated.

IMPORTANT UPDATE - READ THIS
http://support.cjwsoft.com/forum/forum_posts.asp?TID=205& ; ; ; ; ; ; ; ; ; ; ;PN=1

The 2Checkout Support Pack which is built in to ASPProtect 7 contains all the pre-built scripts you need to implement 2Checkout Payments with ASPProtect. You must be using version 2 of the 2checkout system. They are phasing out version 1 regardless so everyone will be using version 2 very soon if they are not already.

THIS IS NOT INTENDED OR DESIGNED TO USE 2CHECKOUT SUBSCRIPTIONS. (see bottom of this thread for more info on that)

This Support Pack basically gives you an additional signup and registration directory "2checkout_signup" and it should not interfere with any changes or customizations you have made to your ASPProtect setup in general. New users can register in this directory and pay for membership at the same time. Existing users whether active or expired can be sent to this directory where they can lookup their account and buy additional membership time online. You can also assign various Access and Group Levels during signup and you can set up various prices for various amounts of time as well. This is a real-time setup for the most part. As soon as a user pays via 2Checkout your system is updated and they will have access.

The 2checkout pack is NEW.. and was released on March 19, 2005. If you don't have it and would like it please just ask.

To start using this edit the "2checkout_signup/2checkout_config_inc.asp" file

You will be entering your 2Checkout Account number in that file as well as the URL you want a user to go to after payment. It is all commented in that file. (There is also a testing variable you can set to True if you want to do testing without real charges being applied)

After editing that file run this page.

http://www.mysite.com/2checkout_signup/show_postback_path.asp

Replacing the part in blue with your website info.

It will report back that postback url you need to use in the 2checkout system.

Log into your 2checkout version 2 account and under the "look & feel section" enter that postback url for both the "Approved URL" and the  "Pending URL"

Trust me: You want the URL there for a pending URL because the 2Checkout system is quite random and 95% of the payments that come in go to the pending URL and end up being legitimate sales. (at least for me they do)

Now make sure the Direct Return option on that page is on as well. 

If set to Yes buyers will be immediately directed to your URLs below once they click the Complete Order button. If set to No the buyers will have to click a button to return to your URLs below.

Save that page... and leave 2checkout.

Now, delete this page from your ASPProtect setup.
http://www.mysite.com/2checkout_signup/show_postback_path.asp

It's a minor security risk and is no longer needed needed.

The basic setup is finished. All you have to now is set up payments options the way you want them.


Changing Payment Options

In the "2checkout1.asp" file there are form options set up.

They look like this and you can have as many as you like.

<option selected value="30,9.95,3,">30 Days, 9.95</option>

In this option... A user has the option to purchase 30 days for $9.95 and he will be set to Access Level 3 when payment in completed.

Here is how it works.

The value setting (red) is essentially and array that can be made up 4 elements separated by comma's
They must be separated by a comma and there can be no spaces. In this example the 4th value was not used but the last comma must still be there. If you didn't want to set an access level and left out the "3" there would 2 commas at the end.  etc etc
Basically there must always be 3 commas but you only have to set the 1st 2 values which are days and price.

days,price,access level,groups

The 1st value is the amount of days.
The 2nd value is the price for the amount of days.
The 3rd value is the access level you want to user assigned to.
The 4th option is the groups you want the user assigned to. (see PayPal subscription thread for examples of specifying group info)

Now, the label for the option in (blue) can say whatever you like.

the sql databse is the same.. the sql script is the same for any version

as the site says they are essentially the same app with very minor changes... if you are trying to share the same sql database with both it's not gonna happen because the table names are the same

truthfully:
that app runs nealry as well with msaccess as it does with sql so I wouldnt get too excited about running it withe sql. You will not see any benefits unless you have a ton of simultaneus (sp) users.