Hello,

You'll need to find a validation function to test for it.
Either server side or right in the form via client side javascript.

I dont have any experience with validating zip codes here much less UK.

Google it would be my best advice.. or maybe find some free app written in UK format and see how they did it.

Good Luck..

And if ya find anything post it here if ya like

The count is in the album area where the small pictures and description of album.   Viewed 1 time(s)  This count never changes.

Thanks

 John

The version of aspbanner you have should not matter.

What you are doing here is wrong.

<PARAM NAME=movie VALUE=" http://www.innovationtools.com/aspbanner/aspbanner/banner_re direct.asp?Banner_ID=25">

PARAM NAME=movie is supposed to link to your ".swf" file.
And thats why all you see is black.

I don't think you quite understood all of that information fully.

Your ".swf" files needs to be coded in FLASH to link to the aspbanner redirect url. You don't change that flash calling code like that.

The ".swf" file links to the aspbanner redirect url which tracks the click and then redirects the user to the Link URL

You basically need to code your ".swf" flash file to go to that aspbanner URL or code your flash file so it can take a parameter for the url it clicks to (like the macromedia article talks about. This has to be done when editing the flash file in the flash editor before the file is saved.

If you dont have access to the original ".swf" to edit it and re-save it.. your out of luck as far as tracking clicks goes

ASPProtect v7 comes with working example code of protecting a file download.

This comes with the system as an example folder with some files in it.

(some of the initial purchaser's of the system might not have that directory.. if that is the case please ask)

Here is how it works...

Basically we protect the file download by only allowing a logged in user to download it. The special ".asp" page we use the stream the file is password protected. It also hides the true location of the file so you can keep your files out of your web or keep them in a folder in your web that does not allow file browsing. Under this scenario even if someone looks at the html source they can not tell where the file really came from and they can only download if they are logged in and you offered them the link to the file.

For the file download protection examples to work you may need to edit some values
in the stream_download.asp file that are valid for your setup.

Look at the source. The values you can edit are commented.

Now, you also need to call a valid "download file name" from the download_link.asp file which is an example of how make a download link to the streamed download.

I am not sure totally understand your question.
I need you to explain it differently.

Any ".asp" page that is protected is going to automatically prompt them for a login box or log them in automatically depending on if they set that option.. In the end returning them to that same page.

So, it really all takes care of itself for the most part.. It doesn't even matter if the bookmark a protected page deep in your site. The system is smart enough to keep them at that page as well as handle their access.

Now of course if they are at an unprotected page of your site and navigate to a protected page they get a loin prompt or are allowed in if they already logged in...

Also.. when you say unprotected page ? do you mean ".htm" or ".asp"

Chris,

I have had a couple of users log out of the system as they are supposed to, move to another computer and not be allowed to login because of "they are currently logged in using another IP address" when in fact they logged off properly.  Is there anything that they should be doing differently?

Thanks,

Jess

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
 
<%
    Response.Write(Session("Groups"))
%>

I think its great to share a mod.

I will have  few with the new album.

Hello,

You are correct regarding what you noticed.. ASPBanner only allows one person to administrate. If if did what you are asking about it would probably cost more.
(you get the ASP source so if you really wanted that you could always add it on your own fairly easily, but it all depends on your skills)

AS for keyword advertising and different ads based on certain pages ASPBanner does not get into that. The main reason being performance as I built ASPBanner primarily as a performance banner rotation solution.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=144& ; ; ; ; ;PN=1

Like that thread says, you could make different zones for different conditions.. then surround the banner calling code with if else logic so a different banner zone was called under certain conditions.

Regardless, if you really need something that has every bell and whistle. BanManPro is where it is at.

Sorry, I guess you did say you finally found them.
Regardless, sorry then, I tried

I dont know what else to tell ya.. except to search www.aspin.com

Perhaps you will find something you can use there.

For pay signups you set the groups during signup it like this thread tells you to

http://support.cjwsoft.com/code/moreinfo186-1.htm

only difference is you need to specify the groups info like so
(basically getting rid of the commas and just leaving behind the group numbers with a * around everything)

Also be sure to have no double asterisks

so, *1*,*2* would just be *1*2*

so, *1*,*2*,*5* would just be *1*2*5*

need more info..

are you using aspimage to resize images and make true thumbnails..
(because if you have it turned on and it isnt actually installed on the server you will get broken thumbnails.)

what kind of images are you using ? gif or jpegs

are you uploading images over existing images ?

really need to know exactly what to do to reproduce the situation from scratch and then I can give you a better answer ??

Hello,

Unfortuantely I can not help you much regarding the javascript because I am a server side code kinda guy. Client side javascript just isn't my thing. That was free javascript code that I used for that function. I really do not know enough about editing client javascript. Sounds like you might though.

Style 1 is really a relic left over from the standard version. I just left it in in case someone wanted to use it. Like I said because it is javascript making it do more than it does is tricky (at least for me)

Now,, for actually getting description code. The thing to do is check out how that all works in the pic_window.asp file which is what style 2 two uses. Bascially descriptions for an particular album get stored in one text file. We read that test file. Put the lines into an array. Then display the info which gets run through a functions to convert some special characters used when saving back to normal.

I tried to look at your site but it woulnt load for some reason.

ok, I am home.. missed flight.. just got home an hour ago.

lets see.. I really need more info...

For starters are you using the delayed stats feature ? that is expirmental and could cause that problem

Good Evening,

I have been trying to log into my site using the protected pages comments you have in support. I have copied the code in the ASPprotect 7 guide.

<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

and pasted it in my page, set the the IIS to open this page and the page will not open it and the page will not open and the error is

Error Type:
Active Server Pages, ASP 0126 (0x80004005)
The include file 'check_user_inc.asp' was not found.
/olem/reldt/introduction.asp, line 3

When I remove the two lines of code everything goes normally.

I have aspprotect in its own directory in the website. I have read the installation several times and I am afraid I am missing something blatently obvious so I really appreciate you thoughts.

I am presently using redirects. I like not haveing to use them as your comments have suggested. I have pulled all that code from the pages I desire to protect during this test.

I have three test users in my database - 1 administrator

Any suggestions?

Thanks and best regards

Chris:

I just got done trying it myself and it worked great for me too. I was aware of the security issue, but I'd already planned on using SSL for this particular call, as well as for the secured pages accessed through the normal process, so the bad guys will be kept at bay.

Thanks for the help.

Now I am having trouble using the log function. 

I have checked the box in administration area for UseLogFiles.  I have put the expected path for the LogFileDirectory in the box.  I have modified the permissions for the anonymous web site user to modify this directory.  However the log file does not get updated and there is nothing when I go to view the logs. 

thx

Chris,

2Checkout.com has added to their required cart parameters:

https://www.2checkout.com/documentation/newparameters.html

Do you have a version of 2checkout2.asp that will support these?

Thanks,

Nick

like I said you made changes to something to cause that...

users/user_area.asp

runs fine the way it ships "it is one of things I tested earlier when I looked at your installation for you"

If you want I'll go look via FTP and tell you what is wrong

Chris:

The string is being saved and I get a .wav ring sound to confirm.  I have tried editing in "notepad" and then running the "data/show_path_info.asp" file after with the same results.

Ken

Hi Chris,

Thank you for your prompt response.

Our current project requires alot of customization.

Yes, the error is probably a data problem and not due to your code, because we needed to make modifications to the database.  But that's why debugging would be helpful.

Basically our intent to modify the asp protect code stems from the fact that our client doesn’t want certain fields to be recorded or to appear: address, city, state, zip etc…

We are happy to be able to modify the HTML, but we also want to modify some other default behavior, such as which page opens when the "cancel" button is hit in the editaccountinfo.aspx page.

Three questions here:

1. I am having a problem with characters being displayed properly when viewing listings. Some alphabet characters and punctuation characters do not display properly when viewing the pages.

Sample here:

http://www.hibari2.com/lanoitanretni/kokusai_profiles/view_i tem.asp?Ad_ID=102&CatLevel=2&Cat1_ID=3&Cat2_ID=& amp; amp; amp; amp;Cat3_ID=&Cat4_ID=&FromSearch=True&SearchPage =%2Flanoitanretni%2Fkokusai%5Fprofiles%2Fdefault%2Easp%3FCat Level%3D2%26Cat1%5FID%3D3

In the access database I was looking at the properties for the ‘Ad_Custom’ fields. Unicode Compression is 'Yes' but IME Mode is set to 'No Control'. I wonder by changing this to ‘Hiragana’ if will solve the issue.

Note: the essays are typed in English on computer with Japanese OS, and then pasted up. Even though they are typed in English, there are several setting that may affect the output.

2. I want to reverse sort order for listings instead of listing 4, 5, 6, 7, I’d like to sort 7, 6, 5, 4… Could you tell me which page has to be edited, and in simplest terms what has to be changed?

3. Also, I’d like to increase the default display of ‘items per page’ from 25 to 100. Could you tell me which page has to be edited, and in simplest terms what has to be changed?

Thanks

The file check_user_inc.asp as the lines: (which include Session("groups")

 Here we set some valus about the user into session variables
   Session("PasswordAccess") = "Yes"
   Session("Access_Level") = CmdCheckUser("Access_Level")
   Session("Admin") = CmdCheckUser("Admin")
   Session("Active") = CmdCheckUser("Active")
   Session("Expiration_Date") = Expiration_Date
   Session("User_ID") = CmdCheckUser("User_ID")
   Session("Groups") = CmdCheckUser("Groups")
   Session("Redirection_URL") = CmdCheckUser("Redirection_URL")
   Session("Password") = RC4(CmdCheckUser("Password"), PasswordEncryptionKey)
   Session("Username") = CmdCheckUser("Username")

There is no way I'm going to spend hundreds of dollars for a thumbnail creation program. Mine is a family web site and all out of my pocket.

Is there any free products that work with Gallery that will create the thumbnails? If not can I create them on my own and link them to the pics? There are tons of Perl based freebies out there.

Steve

I assume that if I am using this product, search engines such as Google cannot access and index my content. Can somebody confirm that; I want to be 100% sure.

In case it matters, I am using a basic, cheap ISP setup where my site is on a shared server.

Thanks in advance.