It does not matter what directory name the ASPProtect files and folders are in but you cant go moving around critical file and folders like it appears you did nor is there any reason to.

All that is is saying is that the users folder, the password_admin folder, the scripts folder, the check_user_inc.asp file, and all the other files and folders that come with the system can be in any directory name as a whole.... but that doesn't mean you can go messing around with the files and folders in that directory.

I assure you 100's of users do not use "aspprotect" as the main folder name and they have no issues doing so.

Regardless, you need to explain in much clearer detail exactly what you did and what paths you used and what is where.  At this point I really do not know what is you did as your post was not clear to me.

You should also check that you have entered correct path info in the admin settings page area. The register page is one of the paths that geths set there.

OK.  If no return page is set, do they end up on a PayPal confirmation page and have to navigate back to my site by going Back or typing the web address?

Nick

Please be more specific. What hit count are we talking about ?

User Logging ? Albums ? Something else ?

Please descriube the situation in detail. There are really no settings for any sort of hit count.

Testing for XML Parser Support

the microsoft xml parser is generally installed by default on all new server setups..

It allows ASP code to make calls to other pages anywhere on the new as well as a lot of other handy things..

download and run this ".asp" page to verfiy that it is installed and be sure it is available for you to use

2004-12-10_132620_test_xmlparser.zip

Make sure you run it from your web server through the web browser

Hello,

If you see that when doing a view source then that code is not running.

I will need to go into your site and look as something is very wrong on a low level and I have no more ideas.

PM or email me the info and I will figure out what is going on.

I'll need ftp or frontpage access to the site.
I'll also need to know the urls for the asprotect system as well as the page you are trying to protect.

CJW

We can't seem to find the purchase emails for this install of ASPProtect.

It would have been in May 2004 for NetOptions LLC or CareerMatrix.com

We noticed it should have been v6 of ASPProtect.

Can you resend the download links?

maybe this is the issue...

do you realize that the descriptive name you give a group is not always going to be the same ID in the database ? The two are not related.

Perhaps what you named Group 1 is really group ID 3

You can tell for sure by generating protection code for group 1 and see what ID it tells you to use..



You also need to remember that you are testing this with different users and it is really easy to get confused so you need specifically log off using the log off page to ensure session info from the previous login doesn't show up and cause confusion when you log in with a different user... etc etc

in addition to logging off that way you may also want clear the session and application info via the code at the bottom of my article
http://www.powerasp.com/content/new/displaying-session-and-a pplication-variables.asp

and do that in between any user you log in as

Regarding installation in a subfolder

Though this should be common sense and ASP.NET 101 "so to speak" One thing not mentioned in the docs..


If you do not install ASPProtect.NET in the true root of a web there a key in the web config you must adjust.

it looks like this

<forms name=".aspprotect~net" loginUrl="/aspprotectlogin.aspx" protection="All" timeout="60" path="/" />

The way it comes it is valid for a root installation..

lets say you installed the application in folder called.
"aspprotectnet"

the key would change to this

<forms name=".aspprotect~net" loginUrl="/aspprotectnet/aspprotectlogin.aspx" protection="All" timeout="60" path="/" />

That would be great.

I am sure you know that many virus that are sent via email have the same property. (double extension). The code can be executed even though Windows identifies them as simple text files etc.

Thanks again

ok, 1st we need to rule out the #1 reason people sometimes think that is not working.

Is is set up never to allow the same IP to increment the count more than once in a row so when testing it is real easy to think the count isn't working because unless you can change your ip you can not increment the count more than once per album

It's a poor mans spam abuse type of deal..
For the most part it will keep some Joker from hitting refresh 100 times and inflating the count of an album.

Do you think that is possible what is happening ?

Also, here is an older thread about the same issue?
http://support.cjwsoft.com/code/moreinfo54-2.htm

let's try this... edit that page with a text editor like notepad...

Carefully replace any instance of "Cint" with "CDbl".. I may have missed some of those when testing the last time I edited the code.

The only other thing I can think of if you are not getting any errors.

Is that you may have the path to the server include file correct but ASP server side code is not executing in that part of your web site.

You can do a simple test to tell if it is...

Make a simple ".asp" page in the same folder.

Put only this code in it.

<% Response.Write ("ASP is executing") %>

then run the page via the web browser thru the server..

If the text prints out ASP is running... if you don't see anything it is not

Hi, its just not something i can suppport as I do not support custmizations to the code epecially when dealing with an image component that is not supported by the application.

Sorry, its something you have to figure out. Bascially I would suggest looking at the existing asp image resizing code and using that as a guide.

Have you considered just buying a license of ASPImage and asking the host if they will install it after you purchase it. It sounds like it may save you a lot of time.

If you are ever looking for a good host for ASP. www.alentus.com is one of the best. There 9.95 plan gives you access to 3000.00 of commercial quaility asp components also which is nice.

This is what "John Evans" of CJWSoft has to say on the matter...

"I think that’s pretty much impossible. If the server sees a .JPG or .JPEG extension why in the world would it go and try to read it or do anything with it.

I believe there may have been some issues with Outlook and Outlook express that made it look like a vbs script sent as an attachment was actually a JPG because someone found an exploit in those programs and it would appear as if double extension files were one thing when in fact they were not.

Having a real time virus scanner on the server (which any good host will) should also catch anything infected being built on the server drives as the file uploads. Always worked for me and I had a lot of people uploading ZIP files on winxptheme.com at one point. Many had viruses in them although I suspect it was totally innocent on the end users part. Some people didn’t even know they had a virus on their rig. 

Fact is anything is possible but I think chances of getting a virus or being hacked in some way from this sort of upload are really slim."

For pay signups you set the groups during signup it like this thread tells you to

http://support.cjwsoft.com/code/moreinfo186-1.htm

only difference is you need to specify the groups info like so
(basically getting rid of the commas and just leaving behind the group numbers with a * around everything)

Also be sure to have no double asterisks

so, *1*,*2* would just be *1*2*

so, *1*,*2*,*5* would just be *1*2*5*

That would not happen unless you added a target to the login form or you're code had a base target set.

Like so..

<base target="_blank">

I would really need more detailed information. It's nothing the system does the way it ships under normal circumstances. For example you shouldn't see that behavior in any of the example protected ".asp" pages

that is unless you have something odd going on with your browser settings or you made changes to the login form or code around it causing it. (or you are using frames and dont have some of the targets and what not set correctly)

My guess is that it has to be something you added or did, but I really need to know more to offer more than that.

(Indemnification Agreement Mod)

This very simple mod will add an Indemnification Agreement Pop-up to the registration signup form which must be agreed to before continuing. This is often done for legal reasons to help cover yourself if something should come up later on.



Instructions:

Download 2006-03-19_212700_Indemnification_Agreement_Mod.zip which contains "terms.js" and put it in your scripts folder. It contains the text that will be displayed in the pop-up. You can of course carefully edit it with a text editor to say whatever you like.

Now carefully edit "users/register.asp" with a text editor. Add this bit of code in blue right after the include to the "footer_inc.asp" file like so. It will be near the bottom of the page.


<!--#INCLUDE FILE="footer_inc.asp"-->

<% If ErrorMessage = "" Then %>
<script language="JavaScript" src="../scripts/terms.js">
</script>
<% End If %>

Your done, that's it. Now when "users/register.asp" is run for the 1st time the pop-up will come up.

I am running .asp pages and using the longer code method to display flash banners on my site.

I have noticed a considerable decrease in the loading of my index page when I have a banner called.  When I remove the banner, all is fine.

Any suggestions?

Dave

ASPProtect v7 comes with working example code of protecting a file download.

This comes with the system as an example folder with some files in it.

(some of the initial purchaser's of the system might not have that directory.. if that is the case please ask)

Here is how it works...

Basically we protect the file download by only allowing a logged in user to download it. The special ".asp" page we use the stream the file is password protected. It also hides the true location of the file so you can keep your files out of your web or keep them in a folder in your web that does not allow file browsing. Under this scenario even if someone looks at the html source they can not tell where the file really came from and they can only download if they are logged in and you offered them the link to the file.

For the file download protection examples to work you may need to edit some values
in the stream_download.asp file that are valid for your setup.

Look at the source. The values you can edit are commented.

Now, you also need to call a valid "download file name" from the download_link.asp file which is an example of how make a download link to the streamed download.

Now that I really think about it.. instead of logging that info to a text file and worrying about folder permissions you could probably just save the post info into an application variable during the paypal ipn.asp post like so

For Each Item In Request.Form
formdata = formdata & vbCrLf & Item & "=" & Request.Form(Item) & vbCrLf
Next

Application("PayPalPost") = formdata & " - " & NOW


then anytime you wanted to see if that info was there or when it happened you could make a simple asp page in your site to display the results like so

<%
Response.Write "(" & Application("PayPalPost") & ")"
%>

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
 
<%
    Response.Write(Session("Groups"))
%>

I have narrowed it down.  The ../ for includes will not work with .asp files but will work in .shtml files.

any ideas?

Is it actually possible, with your product, to password-protect the folder that has the actual database without having to require customers browsing the listings to enter a password, or will password-protecting the database folder prevent customers from browsing the classifeds listings?

You are not supposed to use "../" with a virtual include

Thats goes against what a virtual include is and makes no sense.
When using a virtual include you give the path as if accessing from the root of the main web / virtual directory

I find it very hard to believe it ever worked like that and if it ever did it was wrong.

Same here.  Thinking it might be server load or the bandwidth to the server.

Thanks for checking!
Lance

Yup everything looks ok - but why no error?

This just gets better - now the email a friend link says sent successfully and doesn't send out - what the heck...

What would cause it to 'think' it is doing the task yet still fail?

If we wanted to user groups, is the "Access Level" in the User setup the same ID as what the group access would be?  Ex. If John had Access Level 4 and the page specified <% GROUPACCESS = "4" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

I'm asking because there is no Group Access Level in the user setup.  Thanks

Alternate Method to call banners from non ".asp" pages.

<iframe src ="http://localhost/aspbanner/aspbanner/aspbanner_inc.asp?Ban nerZone=4" width="468" height="60" frameborder="0" marginwidth="0" marginheight="0" scrolling="no"></iframe>

Be sure to delete the space in the BannerZone variable above. I am not sure why it is doing that in this post.

You can try calling the banners in an simple iframe like so.
This method should work much better than the javascript method because users with javascript turned off will still see the banners. You also will not have any of the limitations the javascript method has. Iframe is now supported by most recent browsers so it is now a good solution. Here is a chart that shows which browser versions support iframe.

Be sure however to edit the height and width values accordingly as that is very important.

The links to view that info are on the main users screen of the admin area.

Down below...

They wont show up unless you have that stuff enabled in the settings screen as well.