dsn-less is the way to go..
http://support.cjwsoft.com/code/moreinfo9-2.htm

you also need to use newer versions of the database as the odbc drivers on the server are sometimes very new and no longer work with access 97 databases

Hi, I am glad you like the system.
Thx for the comments..

The banner logic in aspbanner it tweaked for speed and performance.. that sort of thing really wouldn't fit into the current code structure very well. It would slow things down and be a nightmare to code because of the way aspbanner uses ultra fast application variables for the banner rotation. Basically its a feature I didnt incorporate for performance and pricing reasons.

I would suggest making different zones for different conditions.. then surrounding the banner calling code with if else logic so a different baner zone was called under certain conditions.

That way performance would not be effected and you could actually show a different group of banners based on certain conditions.

Sorry, but that is the best advice I can offer at this time.

I built ASPBanner for performance and at this time I refuse to sacrifice that for any feature that will slow it down and consume more resources.

well, assuming that function works and is vbscript not vb
(if it is vb code it may need some conversion work)

anyway

in "users/add_new_account.asp"

you would put the code for that function anywhere in the page.. it does not matter where as long as it is in code tags <% %>

then.. right under this part of the same page

If Zipcode_Postal_Code_Required = True Then
 If  Zipcode_Postal_Code = "" Then
  ErrorMessage = ErrorMessage & Server.URLEncode("You need to enter a Zipcode_Postal_Code.\n\n")
 End IF
End If

add this

If Check_Postcode(Zipcode_Postal_Code) <> True Then
  ErrorMessage = ErrorMessage & Server.URLEncode("You need to enter a Valid Zipcode_Postal_Code.\n\n")
End If

No guarantees but that is the gist of it

(User Search & Contact Mod) for ASPProtect Version 7.x

This will allow an individual user to search for other users as well as email or call them.

Notes: This is a down and dirty mod. The users page from the admin area was used as a starting point. I then edited it up real quick to be used as a user search. The way it is it shows the user email as a regular email link. If you want to set it up so emailing is done from the application and emails are not actually shown you will have to do some extra work. If you don't want phone numbers shown you will have to remove that column which is not very difficult.

Directions:
Back up your existing ASPProtect installation.

copy "search.asp" into your "users" folder

2006-03-10_143253_User_Search_Contact_Mod.zip

Direct your users there. They will have to be logged in to view the page.

WARNING: This has not been extensively tested for SQL Injection attacks.
I think it is perfectly fine the way it is by looking it over quickly, but use it at your own risk.

Excellent

For all you advanced users..

Here are two examples of ASP.NET code you can use on your ".aspx" pages to call banners from the ASP 3.0 version of ASPBaner Unlimited V8

This code is not supported... and you of course must change things accordingly like the variable names and zone numbers to match the zone you want to call banners from as well as the url.

2004-08-27_153832_asp.net_examples.zip

Not sure because of the nature of the javascript method

for starters tighten up the html around the banner call

change

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<!------- ASPBanner Ad code ------------->
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >

</td>

to

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >
</td>

If that doesn't help I would suggest using the ASP 3.0 version of ASPBanner. It can serve banners to a any type of page extension and it runs just as well as the .NET version. There is a new iframe method for calling banners that you can try instead of the javascript. The iframe method is explained in the ASPBanner Unlimited section of the forum.

ASPProtect Version 7
Expiry Notices go out to members who have recently renewed by subscription.

When an existing member from ASPProtect Version 6, with an expiry date, renews with SUBSCRIPTION in v7, the previous expiry date remains unchanged.
We assume the expiry date remains blank with NEW Subscriptions and that Paypal takes care of notifications.

 But our notifications to the "about to expire" dating from v6 catches the "Renewed by subscrtiption" as well, as the date has nor been changed or removed, and this REALLY confuses our members.

Can this be resolved?

Most likely it is no longer supported on the web server. The web host probably moved you site to a windows 2003 server which does not support cdonts or they stopped running the IIS SMTP server.

You usualy wont get an error..

it is also possible that cdonts is boned up as it is pretty flaky and that tends to happen. For example sometimes the emails it is suppost to send get caught up in the smtp pickup directory and never get sent out until the server is rebooted.

You should really ask the hosting company why cdonts has stopped working. It definetly has nothing to do with the code if it has been working all that time.  If CDONTS still is supportd tell them you emails are in limbo. Ask them to look and see if a bunch of ".eml" files are stuck in the stmp pickup directly and if so to please reboot the server.

lastly:
cdonts has been deprecated and now everyone uses cdosys.
see my article
http://www.powerasp.com/content/new/sending_email_cdosys.asp

Yes, that’s all I wanted to know. The problem is on my end. The server is not creating the .NET site correctly. I think I got it working now. Thanks.

In case you wanted to know? The only reason I asked you is because you mentioned that you where having trouble with overseas piracy and my account is new. I figured it was my user error by just though I’d ask you first. Hope you have no more piracy issues and have a good rest of the day.

Thanks again for the quick response.

I'am in the process of modifing registration and tieing in paypal. When I get live I will send you a link. Thanks for help.

John

upgrade pricing is here
http://www.aspbanner.com/purchase_unlimited_v8.1_classic_upg rade.asp

what is different
http://www.aspbanner.com/v8_notes.asp

the changes to make it work with MySQL were vast to say the least
more on that from an old thread
http://support.cjwsoft.com/code/code_info.asp?TID=37&PN= 1&TPN=1

just please remember use of MySQL is just not supported
http://www.aspbanner.com/mysql.htm

I can assure you it works well as I have people using it

Hello,

You are correct regarding what you noticed.. ASPBanner only allows one person to administrate. If if did what you are asking about it would probably cost more.
(you get the ASP source so if you really wanted that you could always add it on your own fairly easily, but it all depends on your skills)

AS for keyword advertising and different ads based on certain pages ASPBanner does not get into that. The main reason being performance as I built ASPBanner primarily as a performance banner rotation solution.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=144& ; ; ; ; ;PN=1

Like that thread says, you could make different zones for different conditions.. then surround the banner calling code with if else logic so a different banner zone was called under certain conditions.

Regardless, if you really need something that has every bell and whistle. BanManPro is where it is at.

The problem with that is when a user deletes an album, the album record does not get deleted from the DB, so counting all the records would return the accurate result. :(

Any hints?

Our webhost changed converted all sites from c: to d:, and without us doing anything else, our customers now get the following error message when trying to access our Classifieds site:

***********

Microsoft][ODBC Microsoft Access Driver] Not a valid password.

This means there is most likely a problem with the "ConnectionString" info that you specified.

If you are using a DSN-Less Connection with MSACCESS.

Check that the physical path to the database has been specified correctly.
It has to be perfect and correct. It cannot be specified using "http://" or by using "server.mappath".
It has to be specified like the following example.

ConnectionString = "DBQ=D:\Inetpub\wwwroot\advpass_pro\_database\passwords.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=admin;PASSWORD=Xpass"

If this is running on an NT server or Win2000 Server make sure that permissions have been set on the database.
Only the server admins can do this. If you are not the admin you will have to ask for this to be done.

If you are using a System DSN

It is not set up correctly. Again, make sure the permissions have been set for the database and that the system DSN has been set up correctly by the server admins.

************************************************************ *********************

We did everything the web host asked us to do, that is, changed all references to the C drive to new references to the D drive, but the error is still there.  We also never changed any passwords (as far as we can remember).  Can someone please tell us where to look (also which file might tell us what the correct password is in case it has in fact been changed.

Is there a way to protect other virtual sites on the server that are not under the default web site considering people may have different websites running off one server?  I get the following error:

Parser Error Message: Cannot use a leading .. to exit above the top directory.

Source Error:

Line 1: <%@ Register TagPrefix="aspprotect" TagName="checkaccess" Src="../../protectpage.ascx" %> Line 2: <aspprotect:checkaccess level="4" groups="null" runat="server"></aspprotect:checkaccess> Line 3:

Thanks!

Can ASPClassifieds display the ads by city?

I have a web directory that lists websites and companies by city.  Is it possible to have specific ads shown to the user depending on what city they click on?  For example, only ads in New York would be shown to users that have already clicked on that city in my directory.

thanks,

Don't want to install the application ? Having trouble doing it ? Don't think you can ? No problem, have us install it for you. PLEASE READ ALL OF THIS Installation service is generally available Mon - Fri during the hours of 10 am - 7 pm EST. We may very well be around to do installs at other times but we do not guarantee that. To do an install we generally need FrontPage Explorer or FTP access to your site. We also need a way to set permissions on any necessary directories, etc etc. To do a SQL Server install we need to access your SQL server via Enterprise Manager. Some installs may require access to other things not mentioned. The server must be a properly set up NT/2000/2003 server running IIS 4-6 for ASP 3.0 applications. (with support for ASP scripts and database connectivity.) Parent Paths must be enabled on the server. Please Note: These ASP scripts do not run under Chillisoft ASP. That means they do not run under Unix, Linux, Apache, etc etc. We do not install our applications on free ASP Hosting solutions. Why, because they are more trouble than they are worth. Free hosts like that are usually zero help if we need something changed. There is a reason they are free. We install the software in it's base configuration. We make sure it is running correctly. If you break the installation you will have to pay to have it fixed. We do not integrate it with your existing site or edit any of your existing web content. That is up to you. Installation fees are non refundable as is the digital source code we sell. When you purchase anything from us you agree to this. We do not do installs for IPNFulfill and Color Sequence Protection as they are simple scripts and do not even use a database.. We also do not install the IPN Support Pack as it is just a folder you copy into your web and some configuration files that you must decide how to configure based on your needs and your PayPal account info.

Any CJWSoft ASP 3.0 application (Access Database Installation)	25.00
Any CJWSoft ASP 3.0 application (SQL Database Installation)	40.00

Contact us if you have any questions.

I am using ASPProtect's password program, which has been very successful, for managing over 1,500 military veterans' memberships at http://www.vspa.com.  What I am trying to do now is utilize the "Groups" code, as generated by the Admin page, to prevent members with expired accounts (and non-members) from accessing restricted "members only" .ASP pages they may have bookmarked, or found via web search. The code generated and used is as follows:

<%@ LANGUAGE="VBSCRIPT" %>
<!-- Begin ASPProtect Code -->
<!-- Groups with access to this page. ( * ADMIN * Member Current * Member Life * Officer/Staff * ) -->
<% GROUPACCESS = "10,12,14,19" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
<!-- End ASPProtect Code -->

The above is placed over the <html><head> statements on the page.

When I am logged in the code works perfectly! When I log off and try the URL again, the page appears in its entirety but with a Login box for Username and Login Password at the top of the page. You may view the problem at: http://www.vspa.com/aspprotect/vspa-password-enter.asp .

What I would like to have happen is expired members and non-members would be sent (or Redirected) to a Login page. I do not want the Login password box to merely be inserted above the page that I am trying to keep them from visiting.

Don Poss,
VSPA Webmaster

I am an experienced ASP developer. Can you tell me whether this would be a very involved process, or whether it is pretty straightforward? I don't yet have a merchant account, so I am not yet familiar with any aspect of accepting credit cards online.

Thanks.

This issue came up once before and when I investigated I could find no error in the html that aspprotect generates and those files do exist where they are supposed to. We concluded it was a parsing error from the log file system.

There just really isn't anything I can do about it. I spent a week trying to figure it out. It is just the log parser screwing up under certain circumstances where there is no reason anything is wrong. They have trouble dealing with some of the complex URL/querystrings that the ASPProtect admin area uses. They think there is a 404 eror when there isn't... etc etc

Tell tell me some info about your install?

How am I supposed to know what is going on when you are not showing me what you have in your web config file and also the directory structure of the install or what you are putting in a page you are trying to protect ? It almost sounds like you are not editing the paths correctly in the various places.  I mean yes you told me something about the "map" folder but what I saying is tell me more detail.

BTW: this is a very important setting in the web.config file and must be edited accordingly so the path is right.

<forms name=".aspprotect~net" loginUrl="/aspprotectlogin.aspx" protection="All" timeout="60" path="/" />

Basically your showing me random errors and posts left and right and I honestly have no idea what your doing ?

Ulitmately though I am trying to help you in this situation like the web site says.

We offer tech support for installation of the base application purchased in it's native form. In some cases in order to receive proper tech support your application will be need to be installed on a live server on the Internet. We simply cannot troubleshoot all issues when the application is only installed on your local machine.

Meaning I am not going to keep this up if you keep asking question after question after question regardign your local XP Pro installation. There is only so much I can assume or guess when you are running this on a local development server. I know you got all sorts of problems getting a decent live server to run this on but that just isn't my problem. Get this up and running on a professionaly and correctly setup live server and when these random configuration errors pop up atl least I can go run the pages and look at them. Right now I am just confused by nearly everything you have posted today. Half of looks like basic ASP.NET path issues that you need to sort of on your own based on where you installed the application on the machine and what you have in the web.config file.. etc etc etc

It is sounding more and more like ASP.NET is way over your head. If you want a copy of the classic ASP version of ASPProtect you are welcome to it. I think you will be a lotter better off sticking to classic ASP unless you really start reading up on ASP.NET and learning more about how forms based authentication and the web.config file work.

ok... lets forget about all this redirecting business for a minute

when I go to "GP01.asp" directly via your web site I get a big nasty error that says this

Microsoft VBScript compilation error '800a0411'

Name redefined

/protect/config_inc.asp, line 15

Dim  Address_Required,CDONTS_Installed,City_Required,Registration _Type,VerifyURL,Log_Off_Page
----^ 

then when I look at what you did in that file I see why

you have this code which is totally wrong because you cannot include the password protection file twice

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
<% GROUPACCESS = "*1*" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

it should be

<%@ LANGUAGE="VBSCRIPT" %>

<% GROUPACCESS = "*1*" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

and that is probably the root of this entire problem.. the redirection was working...
but you were sending them to invalid pages with errors

all those pages are wrong...

if you dont see the real error above see this

http://support.cjwsoft.com/code/moreinfo11-1.htm

if you look over the aspprotect 7 installation instructions that is the very 1st thing I tell people to do

hopefully this is the info you need to continue and get some work done

I just purchased the software and it looks great however, I have been fighting for 4 hours trying to get a protected page to do what it is supposed to.

I was trying the examples you provided and they worked fine, then I would use the code at the top of my pages with no luck.

When I installed the software, I used an FTP package as I have found lately that anything with a database gets all messed up when I publish with FP.

On a whim, I took the page I was publishing in FP and published the same page with my FTP program.  It worked!  What I can't figure out is what FP does to the files to screw them up so they won't function.  Is there a setting in FP that I have to change to get it to work?  The files look the same, but they are different sizes when I overwrite them with FTP.

Any ideas?  I don't want to have to publish my entire site with FTP as it is a FP template site.

Thanks,

Dave

  Much thanks, the duplicate incl's I spaced on and should have caught.  The hidden form variable was a key issue.  Thanks for the syntax and the help.  Now I get this page together. j  As a note - I got faster results by dropping my timeout to 3 minutes temporarily while progging and cleared browser cache between tests.  Thanks again.

ConnectionString = "DBQ=C:\TradersReportsCom\aspprotect\data\database\ASPProtec t_access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

I have already set the folder permissions as indicated in the documentation.

Parent Paths ?

http://support.cjwsoft.com/forum/forum_posts.asp?TID=5&P N=1

Access to some sections of the forums must be requested.
Please Click on the following link and read all of it carefully.

http://support.cjwsoft.com/

When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner. 

The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though) 

Really the best way to show it is with an example as seen below.

Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.

All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser, 

The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser. 

In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.



On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.

http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html

This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code.