yes, there is upgrade pricing
http://www.aspprotect.com/purchase_v7_upgrade_pricing.asp

and upgrade instructions here in the forums

if you install it in the same directory structure you wont have to make any changes to the pages in your site you have already protected.. because the code to protect a page will be the same

now, anytime you upgrade an application like this there is going to be a lot of work involved especially when there have been so many changes
http://support.cjwsoft.com/code/moreinfo173-1.htm
whether or not you upgrade is up to you

Like I said you can make version 6 work with CDOSYS and a remote email server. You just need to do some research on CDOSYS code and spend the time needed to make the code use it. I however am not going to spend time detailing all of that when I created a new version that does it.

I am trying to import a file, and I get this error:

Microsoft VBScript compilation error '800a03f9'

Expected 'Then'

/aspprotect/password_admin/upload_post.asp, line 6

If Session("Admin") <> "True"
-----------------------------^

Any suggestions on how to fix it?

Thank you.

if you use either of those options the mail server info you use must of course be valid (example: mail.somesite.com) your host can provide that info

you should also make sure your sending the emails using an account at your email server.. not some other email you have


other than that if it does not send emails it could be because your hosting company may require authentication for outgoing emails...

ask them ...

if that is the case the version of ASPBanner you have does not support sending email that way and you would need to add the necessary code to any places that send email... in order for emailing to work

Chris, that fixed it.  Found 2-references to guestbook2 in the file show_messages_inc.asp located in the \guestbook\ directory.

Suggestion for future release.  Create an option to email the admin when a message is posted.  If this code already exists please advise.

Thanks, Lance

I'm having an issue importing. It moves the images from the /import folder and creates the thumbnails with no problem, but the full-size photos all have a size of 0 bytes.

http://www.larrysampas.com/gallery2/default.asp?CatLevel=2&a mp;Cat1_ID=1

grrrrrr

As far as the users thing... my fault that was setup wrong in the settings of the admin login page.

but still dont have a solution for what im trying to do

I did a sign up.. your verify URL is not saved/set in the application variables.

try saving the admin settings page again.. or reboot the server so the settings get reloaded

if you can make sure the web is it's own application in IIS

if it is your server do and "iisreset" from the command prompt

if all else fails you got iis application issues with the site... wait till tommoro to see if the setting gets loaded

Thanks.

Nick

If you are using version 6 CDOSYS is not supported. That is one reason why version 7 came out. If you want to rewrite the code to work with CDOSYS in version 6 that is something you need to sort out on your own as I do not support custimization to the code.

Javascript Popup/Pop Under Generator

Until I have time to make one I suggest using the one on the banmanpro support site as it is pretty nice.

Just dont use option 2 on that page as that is specific to banmanpro

http://www.banmanpro.com/support/popupgenerator.asp

When I add a user, I can not activat it.

What do you have the registration type set to in the settings ?
They wont be activated automatically unless you have "automatically" selected ?

It sends me back to log on and will now allow me to log in as admin???

I am not quite sure I understand ? Seems to me like that would be normal because you can always log in as the admin at any time. If you cant log in as the user you just signed up as that could be for a couple reasons relating to the registration type you have slected in the settings. There are 3 types all epxlained in the settings screen. Some require manual activation byt the admin, some involve a registration email.. etc etc

I can restart the APP and log in as Admin, but the user I added
is still not activated??

How and why are you restarting the applicaton ? Please explain what your doing there.

My system will also not allow me to set the Stay Loged in FLag.
It just ignores it....

As I told you in an email earlier cookies must be enabled for authentication to work. You mentioned now you can not log off ? I am not sure I know what you mean by that. I assume you know to close all browser windows when testing things like this and I assume you know you have specifically log off and confim it in order to remove the remember me cookie and have to log in again when you return to the site.

Regarding (ASP Photo Gallery Pro)

If you are looking to import a very, very, large number of images, the upload feature might not be sufficient for you. I have done some work using a unix terminal to be able to upload as many images as I would like by simply placing the images in the directory and renaming the images. There are other ways to rename the images, but I am very familiar with Linux, so I chose to do it this way. If you are running Linux, MacOS, or another Linux-based OS, you can simply pull up a terminal and run the following command in the appropriate directory. If you run Windows, I'd suggest CygWin, which creates a Linuxenvironment (Linux shell). It can be found at www.cygwin.com In order to be recognized by the ASP software, the images must be in the format of pic_"Album Number"_"Picture Number".jpg . Therefore, the following code is run to accomplish the file name change (on one line without wordwrap):

ls -1 DSC* |
sed 's/DSCN//g'
sed 's/.JPG//g' |
awk '{print "mv DSCN"$1".JPG pic_9_"$1".jpg"}'
This command will change all files beginning in "DSCN" to "pic_9_*Picture Number*".

This does have a slight problem however. If there is a large number of pictures, 0's become a problem. For example, if there are 200 pictures, picture 1 will show up as pic_9_001.jpg. This can be fixed by the following command, which will eliminate unneccesary 0's (All on one line once more):

ls -1 --color='never' pic_9_0*
|sed 's/_0/_/g'
|sed 's/pic_9_//g'
|sed 's/.jpg//g'
|awk '{print "mv pic_9_0"$1".JPG pic_9_"$1".JPG"}'

This command eliminates 1 zero. It should be run as many times as needed to eliminate all zero's.

Please Note: These commands will only show the resultant set (The list of picture names). In order to execute them, they must be output to a shell script using the ">" character as follows:

ls -1 DSC* |
sed 's/DSCN//g'
sed 's/.JPG//g' |
awk '{print "mv DSCN"$1".JPG pic_9_"$1".jpg"}' > temp.sh

Then, the shell script must be run using the following command:

sh temp.sh

This might take a few moments, depending on the amount of picture names that are being changed.

IMPORTANT: BACK UP all files before changing file names. Also, view the resultant sets to make sure it's what you want before outputting to a shell script.

If you have any questions, please feel free to post or e-mail me @ JPortnoy@checkernet.com

Ok nevermind that... i got by that wasn't paying attention...

The problem is even before this which i didn't know until now.

I placed the protect tag in a page i called members.aspx

When i go to this page is says ACCESS DENIED etc etc etc.

When i go to login to view this page i get the error..which i DIDNT know because i assumed it was working. This is the error im getting:

Server Error in '/MAP' Application.

---

The resource cannot be found.

Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable.  Please review the following URL and make sure that it is spelled correctly.

Requested URL: /map/users/aspprotectlogin.aspx

btw it says /map because that is the subfolder within the root folder

Hi. Chris.  I'm not a programmer of any sorts, so I am not comfortable plugging in the changes you suggested and not knowing for sure if it will "break something somewhere else".  If the programmer tells me "you have been warned", its a pretty good sign its a no win situation. If you don't know, theres no way i can know.

I saw in the code where you mentioned the changes. I don't see where it mentions the last name is required either, but the bottom line is it does require it it the actual new user form.

Thanks anyway Chris. I'll figure something out.

-john

Humm, Did you change something in a bad way? Thats my guess.

I need more information on what is going on because by default it does not do that ?

The only possible way I can think of that could cause that is if you changed things around too much and the config_inc.asp file is getting run/included twice on that page your logging in to.

Also, when you sign in "where" ? What page ?

Tony,

ASPBanner.NET was discontinued about 14 months ago. It is no longer supported in any way because quite frankly the classic ASP version is faster, more stable, has more features, and is a lot easier to install and get running.

If you PM me via the forum you are welcome to a copy of the current ASP Unlimited Version. It can serve banners to any type of page extension. All you have to do is ask for a copy.

Whether or not your existing ASPBanner.NET database is exactly the same structure I do not know, but I believe it is. You should compare the two if you plan to keep using the old database and make any neccessary changes so the old database has the exact same structure as the new version. If there are any differences they are very few.

I would check out this article for starters... aspprotect is very similar to asp photo gallery and so are a lot of the page names.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=49& PN=1

Jeromy, You should have access to that page.

• What kind of encryption do you use with version 7?
• If I purchase version 7 and use it on my site with a new SQL database then migrate the old records from version 6 so I can by-pass the issue with my home-grown Base 64 encryption, do you forsee other issues with the upgrade?

check the action for the button in the code... its probably not posting back the the right page which should the same page it is...

I bet ya it is posting to guestbook2 which is the wrong directory... an old mistake I forgot to correct...

I wonder why the banners in ASPBanner 8.1 are moving from one place to another when opening my site www.helserevyen.no in a Mac Safari browser and click on refresh?

Can you take a look at my site and response?

how about translating the error to english..

Looks to me off hand that it would have something to do with the SQL server itself not being run in an english lcid/format and causing some sort of date issue.

I would also suggest you start off with a brand new blank SQL ASPBanner database and make sure that works before you attemp t to import any data into it.

Everything seems to work fine and I thank you very much for you quick response!!!

ok,

IE and firefox do some things differently.

It could very well have to do with MIME types set on the server for your website. pdf probably isnt set as a mime type which can cause issues with file streaming situations.

Mime types are either set in the IIS console for your web site under the http headers tab or you can try setting the content-type header to 'application/pdf' right on the asp page the does the streaming

see this article which shows how to do that
http://psacake.com/web/gj.asp

'Specify a MIME type such as "text/html", "image/gif" or "application/pdf"
Response.contenttype = "application/pdf"
'Useful in cases for unknown file types

You would want to put the code that sets the contentype as close to the top of the asp page doing the streaming as possible.

Every application we sell that has a password on the database uses "temp"

Also, the password is in the connection string in the dataconn_inc.asp file.

After all, the ASP code needs to know the password just like anyone that wants to open the database would.

[/QUOTE]

That i have, my question revolves around the all the users and passwords that I in that database. I need to be able to export that list to word for a mail merge list, but when I do the passwords show up encrypted. I need to be able to get an unencypted list.

thanks

I have narrowed it down.  The ../ for includes will not work with .asp files but will work in .shtml files.

any ideas?

Editing the look of the login page.

In this version editing the look of the login page is very easy.
You can make this login page look exactly like you web site if you like.

You want to edit the "scripts/login_form_inc.asp" file.

It can be edited with any editor as long as the existing bits of server side code in it and the login form remain in tact.

The best thing to do is back it up before you start editing it.
Then if you goof it up you can revert back to the original.

If you edit this page with FrontPage enable the "show all" feature.
Its the little PIE sign in your icons. It will show the server side code as yellow things on the screen so you know where they are and can be careful not to delete them.

see screenshot