Hi, its just not something i can suppport as I do not support custmizations to the code epecially when dealing with an image component that is not supported by the application.

Sorry, its something you have to figure out. Bascially I would suggest looking at the existing asp image resizing code and using that as a guide.

Have you considered just buying a license of ASPImage and asking the host if they will install it after you purchase it. It sounds like it may save you a lot of time.

If you are ever looking for a good host for ASP. www.alentus.com is one of the best. There 9.95 plan gives you access to 3000.00 of commercial quaility asp components also which is nice.

It's probably something I could do for you as a custom project if you are interesting in paying to have that work done, but it is probably not something that will be added to this version of aspbanner as it is in my opinion a feature more suited for a more expensive software package.

It is also difficult to get ASP code to do things on it's own. Scheduling something to run on the server or some other clever scenario is necessary and that usually means it would be unique to each persons setup.

http://www.cjwsoft.com/custom_work.asp

Banners no longer show up on my site ?

If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.

The web server must have crashed or lost power and now the application variables are in limbo/not working.

I have seen this happen a few times.

Basically the application variable system gets messed up because it was not shut down properlly.

The way to cure it are as follows.

Edit and save a banner in the system. Hopefully that gets things going again.

Thanks!  Will try both.

Appreciate the support.

humm, I dont know.

If you want me too I would be glad to go into your web site and troubleshoot. If so PM me the info I need and I will take a look and see if I can figure it out.

CJW

Nope,

No changes to any scripts - just a response.write added to Email_Password.asp to print out the SQL.

Sure - here's the address.

www.omegaphibeta.net/aspprotect/users/Email_Password.asp

-Toni

P.S.  E-mail address to look for is serena_5@hotmail.com

Hello,

It is very possible (just basic ASP and database accessing techniques)
It is just not the sort of thing I support in the forums as it is a customization related.

Even for me something like that would take 1-3 hours of coding time. Basically, it is just not something I could just explain to you real quick.

You might want to pick up a good book on ASP or check out some of the great resources out there. http://support.cjwsoft.com/forum/forum_topics.asp?FID=17

Doing stuff like this is relatively easy, but can be time consuming work.


In the future please use a more descriptive topic for yours posts "I need help" is not exactly helpful to anyone else searching through the forums . I therefore renamed your post accordingly.

I really try to keep the forums organized and clean. That's all.

Thanks

Protecting ASP Pages

To protect a page without using the Access_Level or Groups feature simply add this code to the top of that page.

Put this under the <%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

This is an example of a File Server Side Include. You could also use a Virtual Server Side Include.

The following URL explains what Server Side Includes are.
http://www.powerasp.com/content/code-snippets/includes.asp

Now when someone runs that page they will prompted to login. They will not be allowed access to that page until they successfully logged in.

An example of doing this is provided in the "default.asp" file included in the root of the Password System.
Look at the source code with a text editor to see the working code. It is quite simple.

 Protecting ASP Pages Using Access Levels

To protect a page using the Access Level feature simply add this code to the top of that page.
You simply specify the Access Level before the include file is called. In this example we are protecting the page with Access Level 4.

Put this under the <%@ LANGUAGE="VBSCRIPT" %>

<% CHECKFOR = "4" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

This is an example of a File Server Side Include. You could also use a Virtual Server Side Include.

The following URL explains what Server Side Includes are.
http://www.powerasp.com/content/code-snippets/includes.asp

Now when someone runs that page they will prompted to login. They will not be allowed access to that page until they successfully logged in as a Level 4 user.

Examples of managing Access Levels are provided in the "multiple_access_levels" folder included in the root of the Password System.
Look at the source code of the ASP pages in that folder with a text editor to see the working code. Again, It is quite simple to follow.

Protecting ASP Pages Using Groups

Please see the code generators in the admin are for the code to do that.

Running in parallel for testing is actually a smart way to do it, but the truth is you don't use anything from version 6 except the upgraded database (we have a tutorial on how to upgrade the database)

Version 7 was a drastic change /rewrite to all of the asp files that come with the application. So you will be starting out with fresh version 7 ".asp" files and folders... You will also find that once you get version 7 running that editing certain things like the look of the users area and the login screens is much easier to do.

That being said any of your own ".asp" pages that you protect use the same protection code they always did, so there will be no drastic changes needed there when you do finalize the upgrade.



If using MSACCESS as the database I suggest installing the application somewhere in your web and using a fresh ASPProtect 7 database. Once you are familiar with the setup and everything is working fine. Attempt the database conversion and when your done stick your converted database in there and see if everything is ok.

Also, if you already purchased the application download the latest version before doing the install. It's the same download URL. If you don't have it email me and I can hook you up. I have added some new features and fixed a couple minor things since it's release.

So far the feedback on version 7 has been awesome..

At one point I was using CDONTS_Installed but since I moved to a new Windows 2003 server I was told by my ISP that either one of these will work

Hi Chris,

Our company has a big dilemma on how to manage the database for accounts that are expiring/expired.

We saw the function to email a batch of users who are expiring soon but this doesn't help us to complete the renewal process.

Once the email is sent, what happens afterwards? how can we setup the system so that we can renew their expiry dates or accounts without too much hassle?

The system currently doesn't have any renewal functions or to allow batch changes on multiple accounts at the same time so we have to manually edit one account at a time. This is extremely tedious if we have over 1000 accounts to manage (and we will).

If you have anything to suggest on all this I would appreciate it :)

Thanks alot
Sylvain

thanks.. it was not taken as a complaint.
I just wanted to explain

When you said you tried using the web version of sql manager. Did you use the microsoft one I link to here "just curious"

http://support.cjwsoft.com/code/moreinfo127-1.htm

I am having problems accessing the admin site at the following URL:

http://www.drsweisberg.com/password_admin/default.asp

It brings up the login page, but when I enter the admin/test, it times out.  The DB is the copy with no password and it resides in a directory on the same server hosting the site but it is not in a folder viewable by web users.  This is how the dataconn_inc.asp is set:

<%
'*** Below are the only two settings you need to edit in this file
 
ConnectionString = "DSN=drweisberg;Driver={Microsoft Access Driver (*.mdb)}"
DatabaseType = "MSACCESS"
%>

The ODBC is setup and the IUSR has read/write/modify permissions.

Any help would be greatly appreciated.

Cool.

Well I'm in the middle of uploading the txt file and it's about half way done and sitting there...so I'm keeping my fingers crossed.

Hi

ASPBanner is great...

I have a little problem I have a ASP site http://www.bythebeach.com.au/

I understand how Zones (location on a pages) works but i need only to display those banners that pertain only to that catorgries or sub catorgries.

How would i do that would ....  Would i have to add a new field in the database...?

Any help would be greatly apprecaited

regards

Domenic

Sydney, Australia

I have reviewed the permissions requirements for folders from the support documentation but do not see the 'internal guest' account shown in our system to allow internet access to read/write to the access database. 

How else can we locate the proper account (or is it possible there is none?) to use to allow permissions to access the Data directory if it doesn't show up as 'Internal Guest'?

Whenever you are running software that can block scripts from certain things you are going to have issues like this.

I imagine many complex asp scripts you will download will do things like this as well.

A highly doubt it is anything to worry about regarding people that use your site.

ASP code delivers standard html to the browser... nothing weird goes on as far as that goes.

This system has been sold for 6 years and this is just not something to worry about. Trust me.. though you may want to tone down black ice so it doesn't give you issues as it tries to block various things.

If I were you I would do some google searches on black ice and issues with it blocking asp scripts.. etc etc

Now, if you are running black ice right on the server that a whole other story and something you as a server admin need to decide what to do about. I doubt that is the case as black ice is not probably suitable for a commercial webserver but I just thought I would throw that out there.

I've encountered another problem.  When i edit the link for existing banners and save it, the banner reverts to the old link instead of the new one.

The directory where the the database is located to rwed so the permissions is not a problem.

Any advice?

Thanks

Your users with Internet Explorer may have received the "Page Expired" error.  For ASPProtect users, it happens when  the user is not logged on and tries to invoke the target page. check_user_inc.asp puts up the login form, and IE sees it as part of the target page.  Any later attempt to Back up and reload from cache gives the errror. 

ASPProtect v7 comes with working example code of protecting a file download.

This comes with the system as an example folder with some files in it.

(some of the initial purchaser's of the system might not have that directory.. if that is the case please ask)

Here is how it works...

Basically we protect the file download by only allowing a logged in user to download it. The special ".asp" page we use the stream the file is password protected. It also hides the true location of the file so you can keep your files out of your web or keep them in a folder in your web that does not allow file browsing. Under this scenario even if someone looks at the html source they can not tell where the file really came from and they can only download if they are logged in and you offered them the link to the file.

For the file download protection examples to work you may need to edit some values
in the stream_download.asp file that are valid for your setup.

Look at the source. The values you can edit are commented.

Now, you also need to call a valid "download file name" from the download_link.asp file which is an example of how make a download link to the streamed download.

The problem was in config_inc.asp. we had renamed the field in the DB but didn't change it in this file.

But we changed it, it is back to normal.

Thanks

Installed latest verison  Doesn't seem to have corrected problem.  Still with same message.  I wonder if deleting this user and putting him back in might help.  I have not however tried any other user names and passwords.

I was actually able to do similar thing by allowing our dedicated search engine to access the site unchallanged.

<%
If Trim(Left(Request.ServerVariables("HTTP_USER_AGENT"),11)) = "MYPASSWORD" Then  
 SearchFlag = True
End If
 
If SearchFlag <> True Then
If Session("Access_Level") > CHECKFOR or Session("Access_Level") = "" Then 
%>
<!--#include virtual="/Auth/check_user_Code.asp" -->
<head>
<title>My Title</title>

</head>

<body>

My Protected stuff here

</body>

</html>

For this to work, the search engine must pass the PW to the web site. I just was not sure how to do the same thing with IPs. I will play with the code and see what happens. If it works, I will post it here to help others, if this is OK with forum rules.

Thanks,

Mo

[/QUOTE]

I just added couple of lines and it works fine

If (Request.ServerVariables("REMOTE_ADDR")) = "xxx.xx.xxx.xxx" Then 
 ' Session("PasswordAccess") = "Yes"
 SearchFlag = true
End If

I'm using the groups protect feature on my pages. None of them seem to close the session after clicking 'logoff'. I can tell because if I hit the back button and return to the group-protected page, hit 'refresh', the page refreshes, I'm not asked to log in again.

On the other hand, when I open a page that's protected by an access level and click 'logoff' (uses same logoff asp file to logoff), it seems to work fine - if I go back a page and refresh, it asks me to log in.

Just wondering - is anybody else having problems like this? Maybe I screwed something up in the few adjustments I made a while back. Any idea what it might be?

like I said... you would have to modify the code
(and really I dont think it is possible, how could it be when images uploaded are of all shapes and sizes)

How are pictures of various shapes and size going to resized to a fixed width and height without distortion on either a horizontal or vertical level ? Uness the image uploaded matches the fixed thumbnail ratio you have set there is going to be distortion.

There is no component that is going to make it any easier. You are already using an image resizing component.

I give you two options the way the code ships.

fixed width and height for thumbnails

or

fixed width / dynamic height for thumbnails

The only other possible option would be

fixed height / dynamic width for thumbnails

and that you would have to code on your own because that option is not there

The last thing I will say is this. Sorry, but I do not support custimizations to the code. It's just not easy to explain. Its a lot of code work. Its a lot of time.

Hi

I've tried almost anything here... I'm using an online SQL SERVER database with ASPProtect 7, and I can't login after my initial creation of the admin account.

It works fine with Access... I believe I have checked all the fields created by the sql statement (which was run with no errors),

What could be the problem here? could it be a problem that I run my local IIS against the online sql server?

sincerely,

Morten

Thanks for that.

I have tried InStr("*2*",>"0") in the query design window but it does not return any members.  

I have orded a Access Bible to help me in furture

It sounds like permissions... to the database folder specifically
they are not correct

It could also be that your odbc drivers are very new and you are not using a new enough version of the access Database. I recommened using the 2002-2003 verison of MSACCESS


Now.. if using a SQL Server Database permissions to certain tables are handled in enterpise manager

If I also password protect the pricelist pages then someone will have to login twice.

nobody should have to log in twice... ?

session variables keep track of access... once your in - your in and you can browse to and from any password protected pages you like

If it is making you log in each time then cookies are most likely disabled.. session variables requires cookies being on to work.. cookies being on  is a requirement of aspprotect and is how Formed Based Authentication works..

let me know if that is the issue there...

you shouldnt have to be logging in more than once per session

Thats the whole point of the application...