I finally spoke with someone who knew what I was asking for and they set the rights and all is fine.

Thanks for your help. Wish all business' had customer support like here

Banners no longer show up on my site ?

If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.

The web server must have crashed or lost power and now the application variables are in limbo/not working.

I have seen this happen a few times.

Basically the application variable system gets messed up because it was not shut down properly.

The way to cure it is as follows.

Edit and save a banner in the system. Hopefully that gets things going again.

If this happens a lot it is a server issue, not ASPBanner's fault.

I pull that crap on myself once and a while... or my favorite is leaving a bootable CD in the drive and then wondering why the heck the OS doesn’t come back up. I pretty much promised myself back in 2002 that I would never mess with anything minor after 10PM. For whatever reason I always start messing around trying to "fix" something and end up sorry... Granted if it’s an emergency I am all for it, but I get dresses in advance anticipating the practically inevitable drive down to the datacenter.

Good luck with that, I am sure you will be much better off in the long run.

Hello cwilliams, and thank you for the fast reply.

Well, i have tryed with the ASPImage enabled and disabled, with the same results. I have used gifs and jpgs in the tests.
I have made some different test. Some with uploading the picture over an excisting picture and some as the first picture. Same results.
Everytime, it´s the 2nd thumbnail that won´t show itself, but the large picture will show, if you press the thumbnail.

I have tryed to look in the code (view_ad.asp), but as far as i can see, everything seems just fine ?!

I know, it wasn´t much help i could give you, but i think i have tryed all the possibilities.

Best regards, Erling

(Password_Email_Confirmation_Mod) for ASPProtect Version 7.x

This will change the basic registration pages so that the email address and password entered must be confirmed when signing up. This eliminates the auto generated password during signup.

Some may prefer it working this way.

Directions:
Back up your existing ASPProtect installation.

Copy the two new files into your "users" folder

"register.asp"
"add_new_account.asp"

2005-12-01_182201_Password_Email_Confirmation_Mod.zip

If we wanted to user groups, is the "Access Level" in the User setup the same ID as what the group access would be?  Ex. If John had Access Level 4 and the page specified <% GROUPACCESS = "4" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

I'm asking because there is no Group Access Level in the user setup.  Thanks

I am attempting to have the page dedirect from the group, as some of my users are part of different and multiple groups (they are not structured in access levels, b/c they cannot be part of multiple levels(?)).  So I think I need to redirect by group.  I am having trouble having this work correctly.

-j

No can do.  In both cases there is an icon that says "Not uploaded".  I click in it and nothing happens.  There is no link to upload.  Am I missing something?

By the way, I appreciate and am impressed with your rapid response. Thanks.

Ya, you must have tried to upgrade from a really really old version like you said which wouldnt really work out because those instructions are specifically for upgrading a version 6 database to version 7.

That line error you had was looking for the User_ID field and I bet the version you had was so old that you didnt have a field named that as a few years ago the field "ID" got renamed to "User_ID"

As for all the cool stuff... yup there is a lot of cool stuff in this version... glad ya like it so far

yea.. it sounds like aspimage is not working right.

You wont get any errors..

I would suggest using some of aspimage's sample asp pages in your web and see if they do their thing. You need to be sure aspimage is working correctly under the ,ost simple of circumstances

Though ASPImage is the standard in ASP image resizing and has been around forever and it works very well. Their support is almost non-existant.. in 6 years they have never answered any email I have sent them. I have sent them 6 or so over the years and then just stopped trying. I bought a server bundle too way back then for like 300.00 or so when we had a company called gisco. You would think they could answer my emails. I think that guy just made a ton of asp components back in the day and then just took a seriously long vacation. Updated them a few times in between when he felt like it and making good money the whole time.. More power too him I guess. I'd love to be in his shoes when he sells an enterprise license for 3000.00. Maybe he isn't even around anymore and the someone he knows just kept the sales going. Who knows..

Anyway... it does a great job when ya get it working.

Personally this is how I install it and it works every time.
I like to put their dll in the system32 folder.
Register it.
Run their licensing prog to make it a full version if you paid for it yet.
Right click on the dll and give the "everyone" account modify permissions
Right click on the "windows/temp" folder and give it the same permissions

I'm using the groups protect feature on my pages. None of them seem to close the session after clicking 'logoff'. I can tell because if I hit the back button and return to the group-protected page, hit 'refresh', the page refreshes, I'm not asked to log in again.

On the other hand, when I open a page that's protected by an access level and click 'logoff' (uses same logoff asp file to logoff), it seems to work fine - if I go back a page and refresh, it asks me to log in.

Just wondering - is anybody else having problems like this? Maybe I screwed something up in the few adjustments I made a while back. Any idea what it might be?

thanks.. it was not taken as a complaint.
I just wanted to explain

When you said you tried using the web version of sql manager. Did you use the microsoft one I link to here "just curious"

http://support.cjwsoft.com/code/moreinfo127-1.htm

IT worked just as cwilliams said. I did see the IP address being stored in the table but it didn't dawn on me that it was tied in to the view count, I tried it from a different IP address and it worked great .

Good coding Christopher

Thanks

John

               Also, I’ve been trying to modify the code to adapt it for our application -- by removing fields that we do not need such as address, city, state, phone, but I am having trouble getting visual studio to compile.  It could be due to the fact that the rest of the project is in C#.  Or it could be due to some other factor in ASP Protect.

The redirection feature isn't working as I exected.

If I clear a user's redirection_URL, they can navigate to any protected page on my website as expected.

However, if I set the user's redirection_URL to a protected page, they cannot login. More specifically, their browser just keeps displaying the login form while the browser's progress bar just increments ad infinitum.

If I set the user's redirection_URL to a NON-protected page, the user is directed to that non-protected page, but if they then try to navigate to a protected page, they are redirected back to the redirection_URL.

Is this the way the redirection feature is supposed to work?

My application requires that a user is directed to a protected page and from there, they can navigate to any page that they are allowed to go to.

What can I do?

That did the trick. Once again a quick very helpfull reply.

Thanks.

let's try this... edit that page with a text editor like notepad...

Carefully replace any instance of "Cint" with "CDbl".. I may have missed some of those when testing the last time I edited the code.

When did you download the ASPProtect Version 7 zip file ?

what did you enter as a wrong password to make that happen ?

does it it do it when other wrong passwords are entered ?

I'm using ASPimage and have the maximum width set to 320 in the settings.  Also using SAFileUP ver. 4.0.

Files upload okay, and the script displays a confirmation that the image was resized to 320, but the actual image uploaded is displaying full size rather than reduced to 320.

Also, the thumbnails are not displayed in the Picture Manager. Would indicated ASPImage is not working or the script is not communicating with it.

Suggestions?

That carrot doesn't really exist in the file, so I'm not sure.

I did download and place the ASPTEST file in www.drsweisberg.com/asptest and when I try to load the 2 pages it fails to load.  I have another site on the same server and I uploaded the same exact set of files and the asp pages load.  www.klarman.com/asptest

http://www.drsweisberg.com/asptest/server_info.asp

http://www.klarman.com/asptest/server_info.asp

This is how I set the connection:

ConnectionString = "DBQ=D:\clients\rklarman\klarman\asptest\_database\asptest.m db;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

ConnectionString = "DBQ=D:\clients\rklarman\drsweisberg\asptest\_database\aspte st.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

Thank you so so much! I went to the admin area and changed the email component from CDOSYS (using remote server) to CDOSYS (using port 25 forwarding) and all is working great now!

Again, thanks!

the menu file.. "menu.asp" or something... just follow the logic of the code to find things like that. Look for server side include files and what not in the source code.

This is a good article on figuring out what pages to edit as well as other things.
http://www.powerasp.com/content/hintstips/common_sense.asp

If it was working and you changed code you could have possible messed up how all of that works... you may need to revert back and be really careful as you make changes testing every step of the way.

Hi,

I wanted to see if you had any suggestions for converting from Access to SQL sever database. I attempted this earlier today performing the following steps.

1) Create SQL Tables using Enterprise Manager / SQL Scripts
2) Use DTS to move all of the existing table data to the sql tables.
3) Update dataconn_inc.asp to use SQL and the required connection string.

When these steps were complete I was able to login to ASPProtect as an admin and search / find both groups and users. However, any attempt to edit or create users resulted in a "the page ... had a problem ... " type problem. It seems that I can read from the db fine but and getting errors writing to the tables. The user id that is being used to connect to the db is the [dbo].

Any additional hints for this procedure?

Thanks

Darrell

also.. every once in a while I get some nervous person concerned about security... and the pros and cons of having parent paths enabled.

etc etc etc

so let me add this bit of info..

I don’t know what your hosting company will say because it is an iffy topic and those that understand it have a hard time explaining it to someone who doesn't. Also usually the hosting company doesn't have a clue except they heard it was a security risk.

I am successfully using ASP protect on our site. I have one question:

The file Check_user_inc.asp looks a bit bland as I can't seem to use the sites Dreamweaver template. If I apply a template to this page, it is duplicated on other pages with this template.

How can I apply a template to this page?

Thanks

Clark

I would check out this article for starters... aspprotect is very similar to asp photo gallery and so are a lot of the page names.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=49& PN=1

Jeromy, You should have access to that page.

sometimes those emails take a bit... all depend on wht you are using to send them and whether a pickup directory is involved

as for the other I do not know.. PM me the site details I can look

if it is a 2003 server parent paths must of course be enabled.. its a requirement of aspclassifieds

nope ,sql server has nothing to do with this

I am talking about the folder pictures are stored in.. it needs modify permissions set for the internet guest account like those articles talk about