Just got back 10 minutes ago..
Missed plane yesterday because of traffic and the flight today was 3 hours plus 4 hours of driving

The fact that you are using Server 2003 is not relevant. I am very familiar with it and all my sites run on it.

The ASPNET account will be there by default once the .NET framework is installed. It won’t just show up in the list, you have to search for it like my article mentions.

http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

That did the trick. Once again a quick very helpfull reply.

Thanks.

http://support.cjwsoft.com/code/code_info.asp?TID=319&KW =paypal

>>I should also mention that the paypals scenarios used in ASPProtect can not be tested using PayPal's sandbox.

>>Also test using two real PayPal accounts and on a live setup. (You'll allowed two paypal accounts) then you can log into the other and refund the transctions and of course it makes sense to use low amount like 1 cent and what not.

Yeah, been messing around with that.  Got everything going except the return page which I can't do until the site is live. 

>>Also, I'd love to see what you came up with with the integration. I have been working on it here as well and took it in a different direction as I plan to sell directions for it as an add-on for aspprotect.

Ok.  Will email you with a username and password for access to the site once it's live. 

Sounds like a great add-on for ASPProtect!

I think I've got it to work somewhat.  I modified the 2checkout1 & 2 asp file to use and pass Product_id.  It now identifies the product correctly.  I'm good fo now. Thanks for the info though.

-Jason

UPDATE..

Installed a new rack mount 1u server this week.

3.2 ghz hyperthreading 1 mb l2 cache prescott cpu
2 gb pf pc3200 kingston memory
SATA Raid.. (2) 120 gb drives running hardware raid 1

It is a supermicro 1u server case and server motherboard.
The hard drives are SATA 150 120 gb 7200 rpm Diamondmax Maxtors

All high end server type stuff... It's a very powerful server and has been running great all week. 500+ hours uptime so far.

Running Windows 2003 Server Enterprise
SQL 2000 Enterprise SP3
SmarterMail
SmarterStats
Windows DNS
ZipEnable (which I am reviewing for them)
ServerMask (which I am reviewing for them)
A ton of ASP Components which I have purchased over the years.

So that means I can now focus my attention on creating software again instead of being a system admin. (Due to these server issues over the past few months I am now back to godly status as far as windows system administration goes.. not to mention I am now back up to speed on the latest processors and hardware)

So, getting back to ASP Photo Gallery...

I spent about 20 more hours this week on the new version of ASP Photo Gallery Pro.. I have another 40 or more to put into it as I have a lot I want to do.

I think it will be ready within the next three weeks. I know a lot of you have been waiting for something.

http://support.cjwsoft.com/code/moreinfo286-2.htm

http://support.cjwsoft.com/code/moreinfo391-1.htm

http://support.cjwsoft.com/code/moreinfo385-1.htm

Yup everything looks ok - but why no error?

This just gets better - now the email a friend link says sent successfully and doesn't send out - what the heck...

What would cause it to 'think' it is doing the task yet still fail?

I am trying to protect and ASP page written in Javascript.  The first part of the page goes:

<%@LANGUAGE="JAVASCRIPT"%>
<!--#include file="../Connections/connWINGAP.asp" -->

When I insert the aspprotect code it looks like this:

<%@LANGUAGE="JAVASCRIPT"%>
<!--#INCLUDE VIRTUAL="/GIS/WCGIS/GISProtect/check_user_inc.asp"-->
<!--#include file="../Connections/connWINGAP.asp" -->

and I get this error: 

Microsoft JScript compilation error '800a03f7'

Unterminated string constant

/GIS/WCGIS/GISProtect/check_user_inc.asp, line 2

I think I understand that your code is written in VBscript and that is why it is not working.  If this is the case, how can I switch to VB to execute your stuff then switch back?

Thanks,

Jess

Weird things happening, when I upload using the vb method the image fails and error is that the image was empty.

Utilizing ASPUpload and after clicking upload file I get a blank screen, no preview, no nothing (it loads with the proper header/footer) but a completely blank body.

Any hints?

also.. the log out page shouldnt really need this
but you can try adding this to it where all the other ones are set to nothing..

<% Session("Groups") = "" %>

Chris, I'm having problems getting this to work. When I plug in the redirect URL and then try to load the web page, the Flash ad never loads successfully - just its black background in the 468 x 60 space. Here's an example of what I'm seeing:

http://www.innovationtools.com/Articles/ArticleHeadlines.asp

Just keep refreshing the page until the black rectangle appears. And here is the code I've loaded for this flash ad:

<OBJECT classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
 codebase=" http://active.macromedia.com/flash2/cabs/swflash.cab#version =4,0,0,0" ID=banner WIDTH="468" HEIGHT="60">
 <PARAM NAME=movie VALUE=" http://www.innovationtools.com/aspbanner/aspbanner/banner_re direct.asp?Banner_ID=25">
 <PARAM NAME=quality VALUE=high>
 <PARAM NAME=bgcolor VALUE=#000000>
 <embed src=" http://www.innovationtools.com/aspbanner/aspbanner/images/ba nners/mindmatters_innovation3.swf "
quality="high" bgcolor="#3CBDCD" WIDTH="468" HEIGHT="60" TYPE="application/x-shockwave-flash" PLUGINSPAGE=" http://www.macromedia.com/shockwave/download/index.cgi?P1_Pr od_Version=ShockwaveFlash">
</OBJECT>

What am I doing wrong? By the way, I'm using the standard version of ASPBanner. Not sure of the version, but it dates from about 2002.

need more info..

are you using aspimage to resize images and make true thumbnails..
(because if you have it turned on and it isnt actually installed on the server you will get broken thumbnails.)

what kind of images are you using ? gif or jpegs

are you uploading images over existing images ?

really need to know exactly what to do to reproduce the situation from scratch and then I can give you a better answer ??

If you want to have a login form on a non protected page that posts
to a protected ".asp" page use code like this.

Change the action of the form to the page you want them to log into.
Make sure to page you send them to is protected by the "check_user_inc.asp" file.

<center>
  <table border="0" width="400" height="200" bgcolor="#000000">
    <tr>
      <td bgcolor="#F4F4F4">
        <form method="POST" action="memberarea.asp">
          <input type="hidden" name="Status" value="Checkem">
          <p align="center"><font face="Arial">ASPProtect Login</font></p>
          <div align="center">
             <center>
             <table border="0" bgcolor="#C0C0C0">
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Username</font></small></stro ng></td>
                 <td><input type="text" name="Username" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Password</font></small></stro ng></td>
                 <td><input type="Password" name="Password" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB" colspan="2"><font face="Verdana, Arial, Helvetica" size="-1"><input type="checkbox" name="KEEPMESIGNEDIN" value="True">Keep
                   me signed in on this computer unless I log off.</font></td>
               </tr>
             </table>
             </center>
          </div>
          <div align="center">
             <center>
             <p>&nbsp;<input type="submit" value="Login"></p>
             </center>
          </div>
       
        </form>
      </td>
    </tr>
  </table>
  </center>

Larry,

I have a new computer up and running and am back on the Internet full time. I am here to help when you are ready to continue with this.

I went to your site to look around and "try it" like you mentioned but I can not really try anything as the admin username/password seems to be something other than the default

Please Note : Users with the option pack a new feature called groups that is much more powerful than access levels.


More On Access Levels

Again, Examples of managing Access Levels are provided in the "multiple_access_levels" folder included in the root of the Password System. Look at the source code of the ASP pages in that folder with a text editor to see the working code.

Access Levels and how they work can be re-coded to work in many different ways. However, you have to be a good ASP developer to make changes to it. Here is some information on how they work by default and also info on an alternate scenario we have provided.

In the "check_user_inc.asp" that comes in the root of this system Access Levels works as follows.

Level 1 has Access to - Level 1
Level 2 has Access to - Level 1,2
Level 3 has Access to - Level 1,2,3
Level 4 has Access to - Level 1,2,3,4
Level 5 has Access to - Level 1,2,3,4,5
Level 6 has Access to - Level 1,2,3,4,5,6
Level 7 has Access to - Level 1,2,3,4,5,6,7
Level 8 has Access to - Level 1,2,3,4,5,6,7,8
ADMIN has Access to - Level 1,2,3,4,5,6,7,8,ADMIN

The "check_user_inc.asp" included in the "extras" directory is an example of changing the access level checking code
to work differently. In that "check_user_inc.asp" Access Levels works as follows.

Level 1 has Access to - Level 1
Level 2 has Access to - Level 2
Level 3 has Access to - Level 3
Level 4 has Access to - Level 4
Level 5 has Access to - Level 5
Level 6 has Access to - Level 6
Level 7 has Access to - Level 7
Level 8 has Access to - Level 8
ADMIN has Access to - Level 1,2,3,4,5,6,7,8,ADMIN

If you get creative you can create some interesting access level checking scenarios.

Here is some additional info..

If the access levels are too restrictive you can ignore them all together and create your own totally custom solutions.
Here is a quick rundown of some of the things you can do.

Ok... so if you want to be really specific about what each user can see and
can't .. here's an example of what you can do

Don't use the access levels before the include file..
Don't worry about what you set a user to in the admin area since the access levels won't be used.

Do something like this..

Every time a user logs in session variables are set that you can access at
any time.. thus allowing you to know who they are.

So you could do something like this...


<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

<%
If Session("USERNAME") = "bob1267" or Session("USERNAME") = "carl45" or Session("ADMIN") = "True" Then
Session("PASSWORDACCESS") = "Yes"
Else
Session("PASSWORDACCESS") = "No"
Response.Redirect(Request.ServerVariables("script_name"))
End If
%>

The following URL explains what Redirects are.
http://www.powerasp.com/content/code-snippets/redirects.asp

That would in effect create totally custom access levels.. but you would
have to do it manually for each user.

You can also do things like this after a person logs in

Show custom html to any specific user based on either their username or
access level ... like so

say there was a menu and a certain link should only show up to username
"paully67"

you could do something like this


<HTML>
<HEAD>
<TITLE></TITLE>
</HEAD>
<BODY>


<br>
<a href="main.asp">Home Page</a>
<%
If Session("USERNAME") = "paully67" Then
%>
<br>
<a href="paullys_page.asp">Pauls Stats Page</a>
<%
End If
%>
<br>
<a href="links.asp">Links Page</a>

</BODY>
</HTML>

Or you can show custom HTML or links based on Access Levels or any other info.

You can do just about anything with if-then statements and
using the built in vbscript functions..

Hopefully this info will help to give you some ideas...

Bottom line is you have to do some work within your site to make the Access Level system really come alive.

If you code support for it yes, the application comes with no paypal code or support built in.

If you think it will help you, you are welcome to a copy of the classic asp version which supports paypal subscriptions. Perhaps looking at the code would help you.

Is it actually possible, with your product, to password-protect the folder that has the actual database without having to require customers browsing the listings to enter a password, or will password-protecting the database folder prevent customers from browsing the classifeds listings?

Please be aware folks..

This file is not provided by CJWSoft. Though this may work very well use of it is not supported in any way. We have not tested it.

This user is not using the option pack so this file will not be compatible with anyone using that because it does not have support for groups and some of the other new features.

Regardless..we appretiate users sharing ideas and solutions that they have come up with.

Hi,

I need to be able to add about 9 checkboxes to the register.asp. would I be able to use one of the custom fields?

The other thing is once I add the checkboxes the value must be written to the DB and later read when displaying the person's Album.

Any idea on how I can do this.

Thanks

sure (XP PRO), see my article on that

http://www.powerasp.com/content/new/windows_xp_pro_and_permi ssions.asp

You not getting a blank page.. you getting an error. You just can't see it because it appears you edited the page background to black.

error '80040211'

/aspprotect/scripts/emailing_subs_inc.asp, line 174

Hi, its just not something i can suppport as I do not support custmizations to the code epecially when dealing with an image component that is not supported by the application.

Sorry, its something you have to figure out. Bascially I would suggest looking at the existing asp image resizing code and using that as a guide.

Have you considered just buying a license of ASPImage and asking the host if they will install it after you purchase it. It sounds like it may save you a lot of time.

If you are ever looking for a good host for ASP. www.alentus.com is one of the best. There 9.95 plan gives you access to 3000.00 of commercial quaility asp components also which is nice.

Right,  I've done that.  My concern is that it will time out again while I'm trying to import the file.

The import/export manager does not show up under the users tab when I log in normally.  I have to pull up the page in frontpage and then preview it a browser to get it to show.

Hi Chris,

We installed our key onto the live server.

However, since our temp key has expired, we can't access our application on our development machine because the login won't work anywhere except on the live server.

Of course we can access the application on dev, if we remove the aspprotect tags, but if we need to log in to do something unique to the user, then we have a problem.

Can we get another temp key from you? And would there be a better long term solution to this debug/maintanence issue?

--JP

Whenever you are running software that can block scripts from certain things you are going to have issues like this.

I imagine many complex asp scripts you will download will do things like this as well.

A highly doubt it is anything to worry about regarding people that use your site.

ASP code delivers standard html to the browser... nothing weird goes on as far as that goes.

This system has been sold for 6 years and this is just not something to worry about. Trust me.. though you may want to tone down black ice so it doesn't give you issues as it tries to block various things.

If I were you I would do some google searches on black ice and issues with it blocking asp scripts.. etc etc

Now, if you are running black ice right on the server that a whole other story and something you as a server admin need to decide what to do about. I doubt that is the case as black ice is not probably suitable for a commercial webserver but I just thought I would throw that out there.

thanks!! the file took care of the extra slash. I also fixed the problem by modifying the permissions.

dazed

Nope,

No changes to any scripts - just a response.write added to Email_Password.asp to print out the SQL.

Sure - here's the address.

www.omegaphibeta.net/aspprotect/users/Email_Password.asp

-Toni

P.S.  E-mail address to look for is serena_5@hotmail.com

User Information

After a user logs in there are variables that you can always access.
They can be used to check various things or to display information
dynamically based on who has logged into the system.

   Session("PasswordAccess")
   Session("Access_Level")
   Session("Admin")
   Session("Active")
   Session("Expiration_Date")
   Session("User_ID")
   Session("Groups")
   Session("Redirection_URL")
   Session("Password")
   Session("Username")
   Session("First_Name")
   Session("Last_Name")
   Session("Company_Name")
   Session("Email")
   Session("Address")
   Session("City")
   Session("State_Province")
   Session("Zipcode_Postal_Code")
   Session("Phone")
   Session("Custom1")
   Session("Custom2")
   Session("Custom3")
   Session("Custom4")
   Session("Custom5")
   Session("Custom6")

You can display them on a page at any time using Response.Write like so

<% Response.Write(Session("FIRST_NAME")) %>

or like this

<% = Session("LAST_NAME") %>

ya, that firewall could mess that up.

just edit which ever style include you are using
(with a text editor)

it will be one of these depending on your settings.. and they are located in the "scripts" directory

view_album_style1_inc.asp
view_album_style2_inc.asp
view_album_style3_inc.asp

find this section of code and remove the part in red


If Last_Counter_IP <> Request.ServerVariables("REMOTE_ADDR") Then
 
 Set CmdUpdateCounter = Server.CreateObject("ADODB.Recordset")
 cmdTemp.CommandText = "SELECT " & tbl_label_albums & ".* FROM " & tbl_label_albums & " WHERE (Album_ID = " & Album_ID & ")"
 cmdTemp.CommandType = 1
 Set cmdTemp.ActiveConnection = ConnGallery
 CmdUpdateCounter.Open cmdTemp, , 1, 3
 
 CmdUpdateCounter.Fields("Album_Counter") = (Album_Counter + 1)
 CmdUpdateCounter.Fields("Last_Counter_IP") = Request.ServerVariables("REMOTE_ADDR")
 
 CmdUpdateCounter.Update
 CmdUpdateCounter.Close
 
 Album_Counter = Album_Counter + 1
 
End If

Hi,

I am using the upload_post_VBSCRIPT.asp to upload the pictures. My concern is the security of this. For instance I've seen some sites get hacked by a user uploading a file (going through the same process) and ending up crashing the entire server.

I tried adding .jpeg to the end of a text file (filename.vbs.jpeg) and then uploading it, and the file was actually uploaded. Is this a potential problem?

Thanks

S

This is great FREE SQL Server Web Data Administrator App from Microsoft..

http://www.microsoft.com/downloads/details.aspx?FamilyID=C03 9A798-C57A-419E-ACBC-2A332CB7F959&displaylang=en

It is an ASP.NET web application that you install locally on your development server and then use to connect to a SQL database whether remote or local.

It can do nearly everything enterprise manager can do.

I have tested it and it works great for me.