The only other thing I can think of if you are not getting any errors.

Is that you may have the path to the server include file correct but ASP server side code is not executing in that part of your web site.

You can do a simple test to tell if it is...

Make a simple ".asp" page in the same folder.

Put only this code in it.

<% Response.Write ("ASP is executing") %>

then run the page via the web browser thru the server..

If the text prints out ASP is running... if you don't see anything it is not

Sorry about earlier post in wrong area-

I have followed instructions to set up access levels (adding the

<% CHECKFOR = "4" %>    for user level 4 for instance.) The database is connecting properly and the basic check for login is taking place, but it seems that all users have access to all levels no matter what is on the database; i.e I set up a test page with "checkfor=4" and all users have access to it, even those with lower leve access.

Any ideas?

Thanks

I do not have any programming knowledge and have what might be a simple question.

I am having a hard time getting my hosting company to modify the rights on the data folder. They state they support ASP and access databases however this is the response I got when I requested the modify permissions set for the internet guest account:

Were the rights changed on the data folder?  No, we do not manage rights to folders.

My question to you is: Doesn't supporting asp require those permissions be set on the database folder or can asp (not just aspprotect) work without those rights modified?

Thanks

How can i get to this to register someone in the database only after the Paypal payment has been accepted.  I was testing it out to see if it makes it to my Paypal account (which it did just fine) then I closed Paypal before paying.  I logged in as the administrator and looked at the member list and the account was created anyway.  How can I stop this from being created until "only" after the Paypal payment has been "approved"?

What if this person never comes back to "try again"? Now the username he used (and is inactive) is not available for anyone else to use.  And it takes up database space.

I am using the Paypal (non-subscription)

Thanks in advance,
scottyFlasher

I do not think it it anything to do with the Application.

You most likely have some sort of ad blocking software that is doing it.

It is seeing the word "banner" or "ad" and blocking the images in your browser.

I doubt it is anything built into xp doing it. XP with SP2 has built in pop-up blockers but no ad blockers like that really. It is norton ad blocker or something of that nature.

I have connected to countless DB's using my own applications written in dreamweaver and have tested them on my own server and also my web facing one.  BUT this seems to be different.  no matter what I try I still get this error.

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x440 Thread 0x6b0 DBC 0x1f995bc Jet'.

On both a windows 2000 server and also a windows 2003 server. Also using both DSN and DSN less connection and oledb.

Any help would be greatly apprectiated.

Thanks

ok

thanks

It's not normal at all. My guess you accidently edited the code in a bad way.

(thats the same code the every guestbook in every application I sell uses including ASPGuest which gets downloaded for free about 50 times a day)

No one has ever said it acted funny.

I would do a default installation with the original code somewhere and see if the problem occurs. If it does I can take a look.

In the meantime I wouldn't be running that as it is probably using up massive processor time because of whatever is wrong with it. 

Can you do a better price deal for that version in place of the one I've just purchased ie for a single licence rather than unlimited Christopher?

Or failing that can you give me an idea of how many changes you had to make to convert 7.3 to work with Mysql?

Regards,

Dave

It's seems to work fine after renaming the file, rebuilding the application, and editing the web.config file to point to login.aspx. It looks like I can use your fine product and thanks again for the help. It was unusually easy. Merry Christmas…

Just got back 10 minutes ago..
Missed plane yesterday because of traffic and the flight today was 3 hours plus 4 hours of driving

The fact that you are using Server 2003 is not relevant. I am very familiar with it and all my sites run on it.

The ASPNET account will be there by default once the .NET framework is installed. It won’t just show up in the list, you have to search for it like my article mentions.

http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

The protection code for my group3 is:

<!-- Begin ASPProtect Code -->
<!-- Groups with access to this page. ( * GP03 * ) -->
<% GROUPACCESS = "3" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
<!-- End ASPProtect Code -->

btw - sorry but I am using v7
and thanks for the assistance

I got ya. Well hey, that's what's great about the iframe right?

Hi

ASPBanner is great...

I have a little problem I have a ASP site http://www.bythebeach.com.au/

I understand how Zones (location on a pages) works but i need only to display those banners that pertain only to that catorgries or sub catorgries.

How would i do that would ....  Would i have to add a new field in the database...?

Any help would be greatly apprecaited

regards

Domenic

Sydney, Australia

In addition to that I just noticed the </href> you have in there.. man that is some scary stuff you came up with.. that may appear to work and make a link but it is not correct. Each link will work but never truly be closed.

That is just not valid proper use of the anchor tag.
You make a link in html like so

<a href = "somepage.htm">somepage.htm</a>
http://www.w3schools.com/tags/tag_a.asp

Then your surrounding each link with <span lang="en-us"> </span>
Not sure why ?

I want to try this on the machine im using now; which is windows XP.

Is this possible? I don't think i can set folder permissions on XP... there is no option to do so...

Is there a way to do it?

IMPORTANT UPDATE - READ THIS
http://support.cjwsoft.com/forum/forum_posts.asp?TID=205& ; ; ; ; ; ; ; ; ; ; ;PN=1

The 2Checkout Support Pack which is built in to ASPProtect 7 contains all the pre-built scripts you need to implement 2Checkout Payments with ASPProtect. You must be using version 2 of the 2checkout system. They are phasing out version 1 regardless so everyone will be using version 2 very soon if they are not already.

THIS IS NOT INTENDED OR DESIGNED TO USE 2CHECKOUT SUBSCRIPTIONS. (see bottom of this thread for more info on that)

This Support Pack basically gives you an additional signup and registration directory "2checkout_signup" and it should not interfere with any changes or customizations you have made to your ASPProtect setup in general. New users can register in this directory and pay for membership at the same time. Existing users whether active or expired can be sent to this directory where they can lookup their account and buy additional membership time online. You can also assign various Access and Group Levels during signup and you can set up various prices for various amounts of time as well. This is a real-time setup for the most part. As soon as a user pays via 2Checkout your system is updated and they will have access.

The 2checkout pack is NEW.. and was released on March 19, 2005. If you don't have it and would like it please just ask.

To start using this edit the "2checkout_signup/2checkout_config_inc.asp" file

You will be entering your 2Checkout Account number in that file as well as the URL you want a user to go to after payment. It is all commented in that file. (There is also a testing variable you can set to True if you want to do testing without real charges being applied)

After editing that file run this page.

http://www.mysite.com/2checkout_signup/show_postback_path.asp

Replacing the part in blue with your website info.

It will report back that postback url you need to use in the 2checkout system.

Log into your 2checkout version 2 account and under the "look & feel section" enter that postback url for both the "Approved URL" and the  "Pending URL"

Trust me: You want the URL there for a pending URL because the 2Checkout system is quite random and 95% of the payments that come in go to the pending URL and end up being legitimate sales. (at least for me they do)

Now make sure the Direct Return option on that page is on as well. 

If set to Yes buyers will be immediately directed to your URLs below once they click the Complete Order button. If set to No the buyers will have to click a button to return to your URLs below.

Save that page... and leave 2checkout.

Now, delete this page from your ASPProtect setup.
http://www.mysite.com/2checkout_signup/show_postback_path.asp

It's a minor security risk and is no longer needed needed.

The basic setup is finished. All you have to now is set up payments options the way you want them.


Changing Payment Options

In the "2checkout1.asp" file there are form options set up.

They look like this and you can have as many as you like.

<option selected value="30,9.95,3,">30 Days, 9.95</option>

In this option... A user has the option to purchase 30 days for $9.95 and he will be set to Access Level 3 when payment in completed.

Here is how it works.

The value setting (red) is essentially and array that can be made up 4 elements separated by comma's
They must be separated by a comma and there can be no spaces. In this example the 4th value was not used but the last comma must still be there. If you didn't want to set an access level and left out the "3" there would 2 commas at the end.  etc etc
Basically there must always be 3 commas but you only have to set the 1st 2 values which are days and price.

days,price,access level,groups

The 1st value is the amount of days.
The 2nd value is the price for the amount of days.
The 3rd value is the access level you want to user assigned to.
The 4th option is the groups you want the user assigned to. (see PayPal subscription thread for examples of specifying group info)

Now, the label for the option in (blue) can say whatever you like.

Just wanted to say how much I like the program! I hunted for days and finally purchased a Perl based product. After several days of goofing with it I gave up. ASPPhoto worked right on first install!!!!

Way to go!

Honestly cannot comment much about v7 since it was just installed on a new server.  We have been running 5.03 for years so I'm looking forward to the new features in v7.

Lance

Ohhh...

I was thinking it worked like this; A user goes to that page and logs in.. and from there they can then browse the site and do what they want..

So in order for it to work i need to edit a page say... members.aspx (i assume it needs to be an asp.net page) and in the header put that protect code and when a user accesses it, it will prompt them for their un and pw and then if correct will allow them to view the page... and likewise if they are still logged in will be able to use the page?

If that is how to works as i mentioned above thats great...

I understand the redirect principle...but say i have a log in box on the main page... you know like most pages have a user log in on the left hand side... i wanted to do that. But i cant obviously protect the main home page or else normal users will not be able to view it without logging in or registering

For pay signups you set the groups during signup it like this thread tells you to

http://support.cjwsoft.com/code/moreinfo186-1.htm

only difference is you need to specify the groups info like so
(basically getting rid of the commas and just leaving behind the group numbers with a * around everything)

Also be sure to have no double asterisks

so, *1*,*2* would just be *1*2*

so, *1*,*2*,*5* would just be *1*2*5*

We want to insert a hyperlink i the mesage area when we e-mail users from the Password Admin area.  Is ther an easy way to insert the hyperlink so when the user gets the e-mail, they can just click on it and go the the page we want them to?

Thanks,

Andy

Hi

I downloaded the .chm format installation documentation but when I open it I get the index but can't see any of the pages so am a bit stuck.

The problem was that I did not have

ConnectionString = "Driver={Microsoft Access Driver (*.mdb)}.... in the connection string.

Thank You.

Hey, I run a business and I will not have things like that mentioned in these forums.

Change the action of the form to the page you want them to log into.
Make sure the page you send them to is protected by the "check_user_inc.asp" file.

<center>
  <table border="0" width="400" height="200" bgcolor="#000000">
    <tr>
      <td bgcolor="#F4F4F4">
        <form method="POST" action="memberarea.asp">
          <input type="hidden" name="Status" value="Checkem">
          <p align="center"><font face="Arial">ASPProtect Login</font></p>
          <div align="center">
             <center>
             <table border="0" bgcolor="#C0C0C0">
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Username</font></small></stro ng></td>
                 <td><input type="text" name="Username" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Password</font></small></stro ng></td>
                 <td><input type="Password" name="Password" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB" colspan="2"><font face="Verdana, Arial, Helvetica" size="-1"><input type="checkbox" name="KEEPMESIGNEDIN" value="True">Keep
                   me signed in on this computer unless I log off.</font></td>
               </tr>
             </table>
             </center>
          </div>
          <div align="center">
             <center>
             <p>&nbsp;<input type="submit" value="Login"></p>
             </center>
          </div>
       
        </form>
      </td>
    </tr>
  </table>
  </center>

you not seeing the real error

http://support.cjwsoft.com/forum/forum_posts.asp?TID=11& PN=1

sure and thats probably what you should do... that pure asp upload thing must not be able to handle the size of your import file... another thing which can very .. also some versions of IIS require registry changes to upload bigger files via asp code alone

Our login works great, variables even help determine menu options.  When user logs on, however, it opens in a new page.  Is there a setting somewhere that sets whether you can open in a new or existing page?

Also, when you log off

Hallo,

Can I change the number of the access levels?

I want to have about 20 levels...

My hosting company uses ASPEMAIL - and I am trying to setup the mailing settings on ASPPROTECT - but cant seem to get it to work.   I've tried many different options - here are two that are the closest - but have issues:

1. If I use the settings:

email component: aspemail

Mail remote server: my internal server name

*no smtp authentication

email mail notification - my email address on my internal server

***I get the following results:

       I can get get notified when a new user logs in, email a user from aspprotect user screen if they are in my company and have a valid email -- but I can not send to the outside world - I get an relay prohibited error.

2. If i try to change the setting to use the Hosting Website email server - I get the following results:  I dont get notified when a new user registers, I cant send to internal company people - but I can send to the outside world.

**any suggestions on what to do? I'm trying to work with the people who manage the mail servers - but since I dont know anything about them - its a bit difficult.

It is refered to as the internet guest account but that isn't the actual username. The username is different for every machine. It usually starts off with "IUSR_" and then your machine name. "Internet Guest Account" is always the account's full name as labeled by IIS when it is installed.

Regardless,

If an account isn't listed you have to add it.

Click (add-advanced-find now) and it will list off all the user accounts on the machine

You can also click (add-advanced) and simply type in the account name or part of it.

Some more tips:

If on a local machine you always just give the "everyone" account full control which is pretty much going to make anything work.

You can also go to computer management in your server's administrative tools and view all of the accounts  and groups there under "Local Users and Groups".

Editing the look of the login page.

In this version editing the look of the login page is very easy.
You can make this login page look exactly like you web site if you like.

You want to edit the "scripts/login_form_inc.asp" file.

It can be edited with any editor as long as the existing bits of server side code in it and the login form remain in tact.

The best thing to do is back it up before you start editing it.
Then if you goof it up you can revert back to the original.

If you edit this page with FrontPage enable the "show all" feature.
Its the little PIE sign in your icons. It will show the server side code as yellow things on the screen so you know where they are and can be careful not to delete them.

see screenshot