After I approve someone's username and password, then go to send them the default e mail telling them of the approval, the e mail never goes through.  The e mailing used to work well for many months, but it stopped working.  Any thoughts?

Spider

ok, here's a test page:
http://www.galvinelectricity.org/download_link.asp

user: test
password: test

Our company just got new computers, so everyone here has the same set-up, all Dells, all about 3 weeks old, all Windows XP.

But I did realize after reading your post that I am using Firefox and everyone else was using IE. When I used IE, I was able to duplicate the error.

But, alas, I am unable to resolve it. Client will be using IE, no doubt.

The pages in the ASProtect Full version that have emailing code in them are as follows.

password_admin/email_user.asp

password_admin/send_mass_email.asp

users/add_new_account.asp

users/email_password.asp

How can i get to this to register someone in the database only after the Paypal payment has been accepted.  I was testing it out to see if it makes it to my Paypal account (which it did just fine) then I closed Paypal before paying.  I logged in as the administrator and looked at the member list and the account was created anyway.  How can I stop this from being created until "only" after the Paypal payment has been "approved"?

What if this person never comes back to "try again"? Now the username he used (and is inactive) is not available for anyone else to use.  And it takes up database space.

I am using the Paypal (non-subscription)

Thanks in advance,
scottyFlasher

[QUOTE=spider]At the bottom of my "users" list page, it asks the question "number of users displayed per page"?  After hitting a larger number than the default of 1-25, it increases the number of users per page to that number.  But as soon as I leave that page, it goes back to the default.  Any thoughts?[/QUOTE]

That is how it is supposed to work. It is not supposed to remember that info after you leave. If you want it to always start at some default number simply copy the URL info after picking a number. You'll see the querystrings that tell the page what to do in the address field of your browser. Take that entire URL and  edit the button in the admin area to link to that. The links for the buttons are in the "header_inc.asp" file and you should edit that file with a text editor.

That's the easy non technical way to set a default on the users page and that applies to anything including doing a sort or whatever.

example...

you might change this

<a href="default.asp"><img src="../images/users.gif" border="0" alt="Users"></a>

to something like this

<a href="http://www.yoursite.com /aspprotect/password_admin/default.asp?SORTBY=Email+DESC& ;MyPageSize=500="><img src="../images/users.gif" border="0" alt="Users"></a>

I need to use SQL for other reasons than efficiency.  If I create 2-seperate databases, would there be a lot of code to edit?

Thank you.
Lance

You not getting a blank page.. you getting an error. You just can't see it because it appears you edited the page background to black.

error '80040211'

/aspprotect/scripts/emailing_subs_inc.asp, line 174

one thing to note... the time period we are talking about is going to to be whatever you have the session timeout set at in the settings.

perhaps making that value lower like 10 minutes is an option for you.. and might help to deal with situation

Hello,

I need to see if this is possible. I want to create a browsing system such that, the user selects a Province from a drop down list on the main page. Based the selection, the username of all the users in that province will be shown. Then the user can click on a specific username and his/her portfolio (photo album) will be displayed.

is this possible? If so, How can I do this, please help.

Thanks

Sean

This has not been officially released yet, but it is ready.
Here is the overview...
http://www.aspprotect.com/demo3/paypal_signup2/overview.asp

And the Code for the IPN Subscription Pack is 30.00.
http://www.aspprotect.com/ipn_subscription_support_pack.asp

A few people are using it and say it works very well.

Like the IPN Single Purchase System it is a separate directory you copy into the web site. One change must be made to your database so it’s pretty easy to get working. 

Though I am not guaranteeing this you should be able to accept Single IPN payments and IPN Subscriptions at the same time without the two bothering each other. I haven’t tested it but one customer is doing it and said it is working fine. It just involves manually specifying the IPN URL for one of the systems so it overrides the default IPN URL on your paypal settings. (As each system needs its own IPN URL) Its easy to do… just a form field you would add to the subscription form. I already looked it up. See below. 

Specifying Your Notification URL

If you only need to receive your IPNs at a single URL, you can enter that URL in the Preferences section of your Profile. If you would like to receive payment notifications for different payments at different URLs (i.e. if you need to separate payments made to different websites you run), you can manually pass the IPN URL with each payment by including it in that payment’s HTML code. Use the notify_url field to pass this information. The notify_url for a specific payment will be saved, and any subsequent updates to that payment (e.g. cleared eCheck) will be sent to that notify_url. When you pass a notify_url in your HTML code, it will override any preferences you set in your Profile. 

Anyway.. the Code for the IPN Subscription Pack is 30.00.
http://www.aspprotect.com/ipn_subscription_support_pack.asp

Ok, I was not aware of this domain controller issue as I have never had a customer have their web server set up that way. It is not a common situation under commercial hosting, thats for sure.

http://support.microsoft.com/default.aspx?scid=kb;en-us;3151 58

seems it was some sort of bug that was corrected in the the 1.1 .NET framework involving no ASPNET account being created. seems there are lots of work arounds involving making new accounts and editing machine config files. I found quite a few google articles as well.

http://www.kbalertz.com/kb_315158.aspx

http://www.15seconds.com/issue/030115.htm

I actually should have said "the framework installed" not "asp.net"

So, in the meantime I am asking John Evans what he thinks about this and I am going to ask you what version of the framework you have installed ? ASP.NET Framework 2.0 is the newest and you definetely should be running at least version 1.1 and probably should upgrade to 2.0.

I do not know why other ASP.NET code you have works ok. Your other code may not be using the odbc driver dll the same way ASPProtect.NET does. There are lots of possible reasons. At the end of the day I think the basic issue here is still a low level configuration/permissions issue and it can be corrected from what I am reading. It just may require a bit of trial and error regarding local and domain accounts and editing the machine config files... etc etc

it is by design actually and something that can be improved
(I just never thought of it when I 1st designed the system and it is actually planned to be added in Version 8)

The trick would be to reset those session variables anytime someone edits and saves their information... not very hard at all

you would do it on the save code page for when a user edits themself.
you want to grab the info posted from the form and  reset each session variable at the same time everything is re-saved to the database

example

Session("Company_Name") = Request("Company_Name")

Triple check the upgrade instructions because I think you missed something important.

line 227 on "/password_admin/save.asp" refers to the "Password" field

the error your getting most likely means it is not there..

Pay close attention to the areas in the upgrade instructions regarding renaming your existing "Password" field to "Old_Password"

Then making a new "Password" field and carefully following the instructions needed to convert your old passwords for use with the new system.

If you don't everything carefully and perfectly this is the sort of error you will get.

You can mix and match banner calling methods all you want.
Try it and see what happens.

However, the only method that is going to work on non ".asp" pages is the javascript or the new iframe method listed in the support forums.

Its still not there as labeled 'internet guest'.  There's a 'guest' and a host of others.  Is there a way to identify it as the proper guest account to use with ASPProtect?

Also, looking through support documentation, I see other possibilities it could be (http://www.powerasp.com/content/hintstips/permissions.asp).  Is there a way of telling which the problem is and whether we use a dsn connection or not?

The error we are getting is

 Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x1340 Thread 0x17a4 DBC 0x162becc Jet'.

/aspprotect/scripts/populate_config_variables_inc.asp, line 11

I would highly suggest setting up a DSN-LESS connection.

That system dsn is most likely the source of your trouble It is probably that or permissions are still not correct.

I can't tell you how many people have had trouble with system dsn's and finally set up a dsn-less connection and everything then worked as it should.

The location of your database is fine as long as permissions are truly set correctly like I mentioned.

Also, be sure you are setting the database type correctly in the dataconn_inc.asp file. That can cause problems as well as some people have been known to delete that line.

See my articles...

http://support.cjwsoft.com/code/moreinfo9-1.htm

http://support.cjwsoft.com/code/moreinfo136-1.htm

http://support.cjwsoft.com/code/code_info.asp?TID=40&KW= system+dsn

Banners no longer show up on my site ?

If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.

The web server must have crashed or lost power and now the application variables are in limbo/not working.

I have seen this happen a few times.

Basically the application variable system gets messed up because it was not shut down properlly.

The way to cure it are as follows.

Edit and save a banner in the system. Hopefully that gets things going again.

ok.. Chris.. I am now kicking myself in the butt.  In the setting section, I had to redirect certain urls and directories to the right spot.  I forgot that I renamed the root folder. 

Thank you, thus far for your continued help.  It is greatly appreciate.

The random password is generated during signup and the function that creates it is located on this page of code.

users/register.asp

it looks like this

Function RndStr(Length, UseChrs)
 If IsNull(UseChrs) OR (UseChrs = "") Then UseChrs = "0123456789abcdefghijklmnopqrstuvwxyz!@#$%^&*()_+=-"
 NewStr = ""
 Randomize(CByte(Left(Right(Time(),5),2)))
 For gpIndex = 1 To Length
  NewStr = NewStr & Mid(UseChrs, Int((Len(UseChrs)) * Rnd + 1), 1)
 Next
 RndStr = NewStr
End Function

For example go to this page and hit refresh and watch the password change.

http://www.aspprotect.com/demo2/users/register.asp

Yes, sometimes if you hit refresh quickly over and over you'll get the same password, but not generally. Also that is not something that would happen normally as a user isnt going to sit at that screen and hit refresh over and over.

Anyway... when signing up the new user of course has the option to change that password to something they would like better...

As far as... "selecting the same user name and password every time"

I need more information. That does not make sense for a lot of reasons.

Most importantly because usernames are not generated. The are inputed by the user during signup. They are then checked to ensure they do not already exist before the user is allowed to complete their signup.

So under normal circumstances there can never be duplicate usernames in the system or even users with duplicate emails as that is checked as well.

Now of course if you edited the code in any way it is possible all this is not working correctly ?

I think you may be using old code where that was an issue... I am going to PM you the latest version..

to be safe upgrade all the ASP files except the dataconn_inc.asp files and your config_inc.asp files

"be real careful not to lose your current encryption keys in the "config_inc.asp" file or you will be in real trouble

You can use your existing database

I will actually explain how to set access_levels and/or groups...

in "users/add_new_account.asp"

Thanks for that.

I have tried InStr("*2*",>"0") in the query design window but it does not return any members.  

I have orded a Access Bible to help me in furture

been working on this for about 5 hours today.. I think I found the problem and it involves a vbNullChar that the encryption process is creating only during login attempts

it then messes up during ASPProtect authentication because it blows up the SQL Statement to the database

like I mentioned before the chances off this happening are slim but possible as two people so far have been able to create the situation

I seem to have the HANNAH password working now using your encrption key

I need a little bit more time to clean up the files I have been working on. Then I will give you new "check_user_inc.asp" and "check_admin_inc.asp" files to try out

this error really does not mean anything specific

Your browser must support a standard called RFC 1867. Please check with your browser vendor for support of this standard"

If you get an error its real weird that the file is being uploaded.
Generally if you get an error during upload it is because of one of these 3 things

Invalid physical path specified

Unsupported upload method chosen

Permissions

See my article on XP and permissions
http://www.powerasp.com/content/new/windows_xp_pro_and_permi ssions.asp

many people dont do their permissions right on XP Pro and that article covers everything

grrrrrr

As far as the users thing... my fault that was setup wrong in the settings of the admin login page.

but still dont have a solution for what im trying to do

Weird

A mod like this would improve tracking by leaps and bounds.

Do you think this addon would be availalbe anytime in the near future? If/when this feature or mod becomes availalbe, it certainly would be ideal if some script was made to import all the log file data.

I appreciate the offer to beta test... but its really more a matter of me getting it ready..

I have a lot done.. but a lot of things are hard coded to only work on my machine and some things have not been sorted out. Giving it to someone else to test would be a waste of time at this point as I they probably couldn’t even run it.

Lately the reason this project has fallen behind has all to do with my main webserver where I collocate.

1st it got compromised (we think by certain competitors who are always up to no good)... then windows 2003 server which I decided to go with on the new server gave me random problems... then the Cisco hardware firewall was acting up and making the sites run slow....then SQL server attacks on port 1433 from Korea when I took the firewall down....and as of the last few days I think the server just needs a new power supply. I swear for the last 2 months I have spent more time administrating my servers than working on code. Yesterday it was locking up every 30 minutes. There have been a lot of days like that and it takes up all my time until I get it situated.  Especially since its over 100 miles to the collocation center. The APC unit I installed that allows me to remotely cut the power to hard reboot is a life saver.

Fun... I tell ya... and expensive.. (hardware, software, lost sales, and time) I am pretty much completely broke at the moment. It has been a very expensive few months.

But I like running my own servers... I run dns servers, email servers, sql servers, web servers.. I do it all. It's keeps me in touch with the latest software/hardware. Regardless , my servers ran well for years and they will again.


anyway.. hopefully I can actually get a new version of the photo gallery out before the month is over. It will probably be the last classic asp version. The version after that will most likely be ASP.net.