Hello:

When using the Mass Mail feature and selecting the Users to ‘Active’ and the Access Level I want to send to the system will still send e-mails to the ‘Inactive’ users from the same Access Level.

In other words it sends to everyone in the Access Level regardless if you choose “Active” only.

Any ideas to correct?

Thanks,

-Ricardo

Hello,

What is the difference between the paypal_sub_signup and the paypal_signup directories?  Also, I know it depends, but what directories and files can I delete from my web server if I am not using them?  I copied the entire set of files that came with the program over to the webserver and I am concerned that there is too much out there.

Jess

Flash Code Generator

Until I have time to make one I suggest using the one on the banmanpro support site as it is pretty nice.

http://www.banmanpro.com/support/flashgenerator.asp

as far as permissions are concerned I wrote two large articles about permissions that cover everything in detail on how to properly set them

http://support.cjwsoft.com/code/info11.htm

see the windows 2003 and windows xp permission threads

From things you are saying I assume this is your server. My comments about the path looking funny are because very few commercial hosts would use the "c:\inetpub\wwwroot\" directory. If you are using that and that is correct info then that is fine.

as for knowing whether or not the filesystem object is working the best thing to do is to try to write  a text file somewhere in your web and see if it works. Testing something under the most basic scenario is the key to troubleshooting asp issues.

http://www.devasp.com/samples/writetofile.asp

Thought that was already done....

Back to the drawing board...

If you need to know how to enable them on your test server.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=5&P N=1

The only major usability issue I've found to date is multi-zone banners. Cloning is helpful to a point, but then if you have a change to that banner, you have to make the change 6 times or what have you. I think, even at the expense of speed, multi-zone capability for a single banner would be excellent addition. Of course, that supposes I haven't just missed it and it's already there.

ok... lets forget about all this redirecting business for a minute

when I go to "GP01.asp" directly via your web site I get a big nasty error that says this

Microsoft VBScript compilation error '800a0411'

Name redefined

/protect/config_inc.asp, line 15

Dim  Address_Required,CDONTS_Installed,City_Required,Registration _Type,VerifyURL,Log_Off_Page
----^ 

then when I look at what you did in that file I see why

you have this code which is totally wrong because you cannot include the password protection file twice

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
<% GROUPACCESS = "*1*" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

it should be

<%@ LANGUAGE="VBSCRIPT" %>

<% GROUPACCESS = "*1*" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

and that is probably the root of this entire problem.. the redirection was working...
but you were sending them to invalid pages with errors

all those pages are wrong...

if you dont see the real error above see this

http://support.cjwsoft.com/code/moreinfo11-1.htm

if you look over the aspprotect 7 installation instructions that is the very 1st thing I tell people to do

hopefully this is the info you need to continue and get some work done

Sorry, there is not any documentation on that.. it is basic asp/database work and customization like that is not supported. I recommended looking at what is already there and using that as a guide to produce more fields. etc etc

I just told you a lot of different things to try... and I doubt you have tried them in the time since I mentioned them

ok

Good Morning, any suggestions on how to best "fake out the system" -- I would like to try to keep this clean so I can see the real errors?

My thought was to try to just move those .gif files to the directory that it thinks it should be in -- do you have any better suggestions? Or reasons why I really wouldnt want to do that?

Encountered another issue.  When entering a user name correct but the wrong password get the following error:

Microsoft OLE DB Provider for ODBC Drivers error '80040e14'

[Microsoft][ODBC Microsoft Access Driver] Syntax error in string in query expression '(Username = 'ROBERT') AND (Password = 'ZŁ$'.

/check_user_inc.asp, line 115

Did I do something else wrong?!

Thanks

I believe what happened is we received the older copy of ASP Banner iwht our purchase of ASP Protect and were notified of a free update to download aspbanner_unlimited_v8.2_feb_26_2005.zip which we did, and that's the one i recently put on our site.

  Sounds from your reply that something technical is going on to the point where I will have to hire one of our Web consutants to dissect for us.  We'll try again and track our issues and send another request for information when we can show you a specific example of what is happening.  I'll be in touch.

Hello Chris:

Let me run some more test if it's working on your end it should be on mine?  I have made some custom updates to the code but no in that area.

Thanks,
-Ricardo

I really do not know.. maybe it is a conflict with something else..

I run many instances of aspbanner on my servers and I have every item to log enabled for my iis log files... my stats server software which reads those log files (livestats and smarterstats) have never reported any 404 errors related to (aspbanner/those images)...

I do not know what is happening in your situation..

sorry.

Things have now changed I found out godaddy has persitis aspUPload and aspjpeg as value added products, I have the aspjpeg working but have been unable to upload when using aspUPload, everything works fine with the vbscript method so I think my permissions are correct. Whenever you get a chance, any help would be appreciated.

Thanks

Mark

I disagree...

It would be 20 hours + of conversion and testing. Maybe more.

Like I said, I converted a version fo ASPBanner once to work with MYSQL. It took forever to change all the code (2 weeks of messing around) and get it working. There were also a lot of issues with null values in the database, ado update code that had to be rewritten, cursor type issues, recordcounts not working, etc etc that had to be sorted out. There was a ton of situations where things seemed to be working but later on I noticed there were minor bugs to deal with. It was a lot of work.

ASP Photo Gallery has a ton of asp pages. It is a much larger app then ASPBanner. If you convert it to work with mysql I highly doubt you could have it running well with less than 20+ hours of work. I wrote the app and it would at least take me that long and there would still be bugs at that point.

If you think you could your not used to my style of coding and don't realize exactly how much stuff needs to be rewritten.

Granted, you could get some of the basics running off mysql in a few hours or less but there is just so much little stuff that would give you trouble.

not really, aside from looking in paypal and manually adding each one for each user...

how many users are we talking about anyway ?

and were any of the users new sign ups from scratch because if they were and that field didnt get populated that is weird?

ultimately aspprotect does not use that field. I was just storing it for the sake of storing it... so its not a big deal but I would still like to figure out what is going on

removing the expiration dates from paypal subscripbers will be enough to fix the issue your having about them getting the expiration notifications

You would carefully use the built in features of access to import/export data.

The password for our databases is noted in the documentation. It's pretty hard to miss really. You can also see the database password by looking at the connection string info.

different versions may be different but it is usually "temp" minus the quotes

Additional Information.

A set of these variables get created for every user that logs in to your site.
For performance and memory conservation reasons some of them can be turned off and are optional.

If you look in the "check_user_inc.asp" file or the "check_admin_inc.asp" file you will see a section of code like this


   ' Start of optional session variables to be set
   ' Recommended that you remark out any of the session variables below that you don't really need to use
   ' This will save a lot of server resource because every user logged in has a set of these
   
   ' I added some code here to not create these if they are empty
   If CmdCheckUser("First_Name") <> "" Then Session("First_Name") = CmdCheckUser("First_Name")
   If CmdCheckUser("Last_Name") <> "" Then Session("Last_Name") = CmdCheckUser("Last_Name")
   If CmdCheckUser("Company_Name") <> "" Then Session("Company_Name") = CmdCheckUser("Company_Name")
   If CmdCheckUser("Email") <> "" Then Session("Email") = CmdCheckUser("Email")
   If CmdCheckUser("Address") <> "" Then Session("Address") = CmdCheckUser("Address")
   If CmdCheckUser("City") <> "" Then Session("City") = CmdCheckUser("City")
   If CmdCheckUser("State_Province") <> "" Then Session("State_Province") = CmdCheckUser("State_Province")
   If CmdCheckUser("Zipcode_Postal_Code") <> "" Then Session("Zipcode_Postal_Code") = CmdCheckUser("Zipcode_Postal_Code")
   If CmdCheckUser("Phone") <> "" Then Session("Phone") = CmdCheckUser("Phone")
   If CmdCheckUser("Custom1") <> "" Then Session("Custom1") = CmdCheckUser("Custom1")
   If CmdCheckUser("Custom2") <> "" Then Session("Custom2") = CmdCheckUser("Custom2")
   If CmdCheckUser("Custom3") <> "" Then Session("Custom3") = CmdCheckUser("Custom3")
   If CmdCheckUser("Custom4") <> "" Then Session("Custom4") = CmdCheckUser("Custom4")
   If CmdCheckUser("Custom5") <> "" Then Session("Custom5") = CmdCheckUser("Custom5")
   If CmdCheckUser("Custom6") <> "" Then Session("Custom6") = CmdCheckUser("Custom6")
   
   ' End of optional session variables to be set

If you do not need a particular variable to be set as a session variable simply comment that line out with single quote.

If you have an extremely busy site with a lot of users this is a good idea. If not, you probably don't need to bother doing this. I added some code in there so they will not be created if they are empty and that alone helps out a lot.

Yes, that was it! I had not created the banner for that zone yet. Once I did it came up fine. Do I win the Bonehead of the Year award?

I am just implementing the product, and I deleted the included zones instead of renaming them. That is why it is up to 6. I am migrating banners from my current system before I implement the code onto my pages.

If I may, I'd like to ask another question. I use rotation on all pages of my site except for the home page, where the banners are all smaller and static - an advertiser can expect their banner to always be in the same spot on the page.

I am currently hard coding this via html, but then I do not have the ability to collect stats on home page banner clicks, so I want to use ASPBanner. My question is, can I do this without creating a seperate zone for each banner? In other words, is there a way to modify the html code (that works just fine) so that in addition to indicating the zone, it can indicate the specific banner I want to appear? I would then paste the code in each cell of the table, and alter the banner #. If I do this with just the zone, I expect that the page will randomize the position of each banner across the page. You can see what I'm talking about by clicking here: http://www.PoconoCommuter.com/

Thanks for your help!

yes. what you are talking about has to do with norton ad blocking software.. it blocks images or paths that have the word "ad" in them.. and you see red x's where images should be on web sites.. usually

it is different then what this thread initially mentions which has to do with a code/server issue with the application variables.

To hopefully wrap this thread up...

This user showed me his site and things were working for me as they should.

We came to the conlusion that the weird behavior he was experiencing was because he was using AutoComplete in Internet Explorer....

It was automatically filling in the fields with his username/password that he had autocomplete save.

So it was a web browser usage issue.. not the code.

recent activity infomation is temporary and mantains itself per application start up.. when the web application restarts for whatever reason the info is reset

a reboot, an iisreset on the server, application pool restarts, etc etc
this is done because if that info was saved in the database your database would get huge real quick

logfiles however do not do that and are permanent

Now I am having trouble using the log function. 

I have checked the box in administration area for UseLogFiles.  I have put the expected path for the LogFileDirectory in the box.  I have modified the permissions for the anonymous web site user to modify this directory.  However the log file does not get updated and there is nothing when I go to view the logs. 

thx

Just to let you know that i figured out my problem. I had to modify the connection in the email code and get the correct path from my provider.

I hope you enjoyed your vacation.

Thank you
Adam

<compilation defaultLanguage="vb" debug="false" />

change it to this

<compilation defaultLanguage="vb" debug="true" />

When you run the code in a production environment change it back though

More Info
http://support.microsoft.com/default.aspx?scid=kb;EN-US;3061 56

All fixed and working

Thanks

Hope the wedding went well.  I have one this weekend.

I was successful at performing an upload.  The free upload software was either not configure properly (probably) or not working.  I downloaded the trial version of softartisan's upload (which is like over $300) and it started working. 

Can more than one photo be uploaded at one time (like a whole folder full of photos) or does each have to be done individually?