yes, PM me the encryption and cookie keys if you don't mind.
I can add it to my combinations that cause trouble.

it might help me to figure this problem out.

you basically have to edit the html in the links in the various pages and remove them... some are in includes files

use a text editor and be causious / back things up before you remove links so you can revert back

Hello,

no default setting for something like that... what your thinking about doing is on the right track I'd say

I am not sure totally understand your question.
I need you to explain it differently.

Any ".asp" page that is protected is going to automatically prompt them for a login box or log them in automatically depending on if they set that option.. In the end returning them to that same page.

So, it really all takes care of itself for the most part.. It doesn't even matter if the bookmark a protected page deep in your site. The system is smart enough to keep them at that page as well as handle their access.

Now of course if they are at an unprotected page of your site and navigate to a protected page they get a loin prompt or are allowed in if they already logged in...

Also.. when you say unprotected page ? do you mean ".htm" or ".asp"

been working on this for about 5 hours today.. I think I found the problem and it involves a vbNullChar that the encryption process is creating only during login attempts

it then messes up during ASPProtect authentication because it blows up the SQL Statement to the database

like I mentioned before the chances off this happening are slim but possible as two people so far have been able to create the situation

I seem to have the HANNAH password working now using your encrption key

I need a little bit more time to clean up the files I have been working on. Then I will give you new "check_user_inc.asp" and "check_admin_inc.asp" files to try out

probably.. better than what we are accomplishing here LOL

or if you like send me the import file and your encrpytion key and I will try it out here and see what happens

either way PM me any sensitive info if any

1st off, what application is this in reference too?
This question should be under that application's area in the forum.

2nd, really need more information and details. There are many ways and methods to send emails and they can all effect what gets delivered and what does not. All on an email server side of things. (I always recommend using the CDOSYS option using SMTP authentication with a real external email that has valid MX records) see my article...
http://www.powerasp.com/content/new/sending_email_cdosys.asp

3rd, your not telling me how many users we are talking about. ASP is not a very efficient way to send emails and extremely large amounts of users should be sent emails in a different way then from an asp application. It is just the nature of the technology being used. Some of different emailing methods the application supports may or may not give you better results. It is really best to experiment though honestly the option I mentioned above is always the best in my experience.

4th, if you are not getting a timeout or a scripting error than the ASP part of things is making it through the amount of users. You have to remember that often time emails that get sent out from web sites end up in junk filters for whatever reason. That is just another fact and why it it is usually best to send out serious newletters using a stand alone application like WorldCast or something.

I am doing a lot of guessing here because you really did not tell me much. I also still am not sure what application this is in reference to as 3 of my apps have newsletter features of sorts.

ok, well if you want to test on your own....  in the ipn.asp file for the subscription folder you will see this area of code used for testing

' Un-comment this section and give this directory proper permissions to enable logging to a text file
' Very helpful for troubleshooting
'   Set ObjMyFile = CreateObject("Scripting.FileSystemObject")
'   LogFileName = ("paypal.txt")
'   'Open Text File.. If doesn't exist create it and append to it .. If exists just append to it
'   Set WriteMyData = ObjMyFile.OpenTextFile(Server.MapPath("paypal.txt"),8,True)
'   RowHeaderString =  ""
'   RowHeaderString =  RowHeaderString & OrderID & vbTab
'   RowHeaderString =  RowHeaderString & Custom & vbTab
'   RowHeaderString =  RowHeaderString & User_ID & vbTab
'   RowHeaderString =  RowHeaderString & subscr_id & vbTab
'   RowHeaderString =  RowHeaderString & txn_type & vbTab
'   RowHeaderString =  RowHeaderString & subscr_date & vbTab
'   RowHeaderString =  RowHeaderString & Access_level & vbTab
'   RowHeaderString =  RowHeaderString & Groups
'   WriteMyData.WriteLine(RowHeaderString)
'   WriteMyData.Close

now that folder will need modify permissions for the text file to be written to but this is a good way to test if the ipn.asp page ever gets hit by paypal.

ITS REAL IMPORTANT THAT THE TEST FILE CAN BE WRITTEN TO OR DOING THIS WILL JUST CAUSE MORE ISSUES

To ensure the text file can be written to and permissions are correct for that folder you can make a new .asp in there and run this to see if the text file writing works

   Set ObjMyFile = CreateObject("Scripting.FileSystemObject")
   LogFileName = ("paypal.txt")
   'Open Text File.. If doesn't exist create it and append to it .. If exists just append to it
   Set WriteMyData = ObjMyFile.OpenTextFile(Server.MapPath("paypal.txt"),8,True)
   WriteMyData.WriteLine("the file was written to")
   WriteMyData.Close

Now, you can even change the location of the text file to place that does have permissions if you like.

This is what I would do if I was in there... then I would make some test payments using 1 cent and another paypal account (your allowed 2)

and see what happens

it is always possible the subscription code may have a bug in it. The last time I tested I only tested the single payment folder which worked perfectly. If I have time in the next couple days I am going to test the subscription stuff again. If there is something wrong I can cure it quickly.

The two routines share a lot of code in common.

Ok, I started the database tables from scratch. I did everything using sql enterprise manager and query analizer..

Same thing happens... certain passwords just do not work.

So I did a lot of testing and I have come to the conclusion that this has something to do with the regional settings of that SQL server.

Here is an example.. see the screenshot below.

Username "admin" password "petepetepete"

The top query done in Enterprise Manager is valid and shows the user.

The bottom query is also valid but it does not show the user.

And that is exactly what is happening from the ASP codes point of view.

Now, this means that even though that encrypted password is getting saved to the databse correctly this particular SQL server just cant deal with it from a QUERY.

It works fine on two different SQL servers that I have. It's just got to be something regional related like unicode characters not being dealt with correctly or something odd like that.

I tried changing the collation data for the "Password" field type on that SQL server and it looks right. I don't know what else to do but it is something about that SQL server. There may be a way to change the regional setting through the connection string but I cant find any articles on that right now.

One solution I have for you to get this working there is to eliminate the encryption factor then I dont think you will have these issues.

It's either that or find another SQL server with US type settings or use MSAccess. ASPProtect runs nearly as fast on Access as long as you do not have over 10,000 users or whatever. The system hardly ever accesses the database so it performance under MSAccess is always good.

Let me know what you want to do. I can shows you how to eliminate the encrypytion factor if you want to try that. I think if I make you a custom version of the RC4 function you can just replace that and then the system will use plain passwords.

Your call..

The version of aspbanner you have should not matter.

What you are doing here is wrong.

<PARAM NAME=movie VALUE=" http://www.innovationtools.com/aspbanner/aspbanner/banner_re direct.asp?Banner_ID=25">

PARAM NAME=movie is supposed to link to your ".swf" file.
And thats why all you see is black.

I don't think you quite understood all of that information fully.

Your ".swf" files needs to be coded in FLASH to link to the aspbanner redirect url. You don't change that flash calling code like that.

The ".swf" file links to the aspbanner redirect url which tracks the click and then redirects the user to the Link URL

You basically need to code your ".swf" flash file to go to that aspbanner URL or code your flash file so it can take a parameter for the url it clicks to (like the macromedia article talks about. This has to be done when editing the flash file in the flash editor before the file is saved.

If you dont have access to the original ".swf" to edit it and re-save it.. your out of luck as far as tracking clicks goes

You need to make sure you created the SQL database using the SQL scripts we provide and that no errors occur whatsoever. That is extremely important. You must use our SQL creation scripts.

Then, when you create the user you need to go back to that user and make sure you check the admin account and save that user again. (many times when setting up a system for someone I find myself forgetting that step and then I have to go back in and check the admin box for the user I created.)

And of course create the user from the ASPProtect admin area web interface. Do not add the user to the database manually because you will have no way to enter the password correct as it is encrypted. And do not change the encryption key after making the user/.

It would also be wise to check the SQL server database at every step to make sure the user info gets created and that all the field info looks correct for the most part.

You also want to be sure to specify SQL as the database type side the connection string info as the SQL directions go over

a remote sql server should not an issue.

thats really all I can think of right now

Please Note : ASPProtect v7.x has a new feature called groups that is much more powerful than access levels. Access Levels were left in the product primarily for existing customers that upgrade to the new version so they do not need to make a lot of changes to their site if they were using Access Levels.


More On Access Levels

Again, Examples of managing Access Levels are provided in the "multiple_access_levels" folder included in the root of the Password System. Look at the source code of the ASP pages in that folder with a text editor to see the working code.

Access Levels and how they work can be re-coded to work in many different ways. However, you have to be a good ASP developer to make changes to it. Here is some information on how they work by default.

In the "check_user_inc.asp" that comes in the root of this system Access Levels work as follows.

Level 1 has Access to - Level 1
Level 2 has Access to - Level 1,2
Level 3 has Access to - Level 1,2,3
Level 4 has Access to - Level 1,2,3,4
Level 5 has Access to - Level 1,2,3,4,5
Level 6 has Access to - Level 1,2,3,4,5,6
Level 7 has Access to - Level 1,2,3,4,5,6,7
Level 8 has Access to - Level 1,2,3,4,5,6,7,8
ADMIN has Access to - Level 1,2,3,4,5,6,7,8,ADMIN

Here is some additional info..

If the access levels are too restrictive you can ignore them all together and create your own totally custom solutions.
Here is a quick rundown of some of the things you can do.

Ok... so if you want to be really specific about what each user can see and
can't .. here's an example of what you can do

Don't use the access levels before the include file..
Don't worry about what you set a user to in the admin area since the access levels won't be used.

Do something like this..

Every time a user logs in session variables are set that you can access at
any time.. thus allowing you to know who they are.

So you could do something like this...


<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

<%
If Session("USERNAME") = "bob1267" or Session("USERNAME") = "carl45" or Session("ADMIN") = "True" Then
Session("PASSWORDACCESS") = "Yes"
Else
Session("PASSWORDACCESS") = "No"
Response.Redirect(Request.ServerVariables("script_name"))
End If
%>

The following URL explains what Redirects are.
http://www.powerasp.com/content/code-snippets/redirects.asp

That would in effect create totally custom access levels.. but you would
have to do it manually for each user.

You can also do things like this after a person logs in

Show custom html to any specific user based on either their username or
access level ... like so

say there was a menu and a certain link should only show up to username
"paully67"

you could do something like this


<HTML>
<HEAD>
<TITLE></TITLE>
</HEAD>
<BODY>


<br>
<a href="main.asp">Home Page</a>
<%
If Session("USERNAME") = "paully67" Then
%>
<br>
<a href="paullys_page.asp">Pauls Stats Page</a>
<%
End If
%>
<br>
<a href="links.asp">Links Page</a>

</BODY>
</HTML>

Or you can show custom HTML or links based on Access Levels or any other info.

You can do just about anything with if-then statements and
using the built in vbscript functions..

Hopefully this info will help to give you some ideas...

Bottom line is you have to do some work within your site to make the Access Level system really come alive.

You are not supposed to use "../" with a virtual include

Thats goes against what a virtual include is and makes no sense.
When using a virtual include you give the path as if accessing from the root of the main web / virtual directory

I find it very hard to believe it ever worked like that and if it ever did it was wrong.

IFRAME is just an client side html thing...

has nothing to do with .NET

will work with any page extension or server side technology

As you see from that compatibilty chart I posted a link to.
Nearly every modern browser supports it.

... doesn't seem to be working on my site. I expect I did something wrong.

I've created some groups, "week", "month", and "year". Their IDS are 6, 5, and 4, respectivelty. When someone goes through the PayPal signup, he's assigned to one of those groups based on his subscription.

When I see a new subscriber and check the relevant group the person's supposed to be in, that person's not in that group. I'm adding them manually for now, but I'd sure like a solution for when I go to sleep...

My subscription code looks like this:

input type="hidden" name="custom" value="5,*4*,<% =User_ID %>

One-off code looks like this:

option selected value="7,4.95,1,*6*"

I've created the groups in my management console. Is there anywhere or anything else I'm missing?

No can do.  In both cases there is an icon that says "Not uploaded".  I click in it and nothing happens.  There is no link to upload.  Am I missing something?

By the way, I appreciate and am impressed with your rapid response. Thanks.

The "forgot your password" feature is not sending passwords to users when they put in their emails.

Any suggestions?

Thanks

Glad it is working.. for anyone reading this the customer bascially did this
http://support.cjwsoft.com/forum/forum_posts.asp?TID=36& PN=1

That being said asp photo gallery actually has a few more places that send email that you going to need to modify as well. Off hand the reply to album, admin massemail, admin send email,and postcard features come to mind possibly as 3 of them.

using a multiple file search and replace utility like ReplaceEm would be the easy way to do all of this in one step and find all the instances

http://www.orbit.org/replace/

Thanks Chris.

Your solution worked!

I guess i am not being clear as to what i am trying to do. As far as the event thing... lets hold off on that for now. It seems Chris has answered my question and i am on my own for that one...

As far as the log in goes: I went to that site you mentioned;www.CafePress.com to see if they had what i was talking about. and they do. Notice on the bottom of the page it says "sign in to your account"

I want that option on my home page where users can sign in to go to their account. It will either take them to a page where they can update their info, or it will take them to a protected page. Pretty much instead of posting a link on the site to say... click here to go to members.aspx and have it return an "access denied" the user can enter their info from the main page and be automatically re-directed to that members.aspx page.

I know how the viewstate works and i also know what that returnURL thing does..pretty self-explanitory.

Hopefully that makes things easier. I just want a user to log in from the homepage and be redirected to either a protected page or their account page...

(as does that cafepress website)

If you need to know how to enable them on your test server.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=5&P N=1

I am converting the email over from CDONTS to CDO so it will run on my host 2003 server.

What files should I be concerned with?  Under gallery_admin there is an email_user.asp and  under the main gallery folder thier is an email friend. Is there an other email routines I should be concerned with?

Thank You for your Assistance.

Jeromy

"save_pic_desc.asp"

in both the admin and users area needs to be edited

You'll see something like this...

If Len(Image_Description) > 250  Then

just change 250 to something higher.. I wouldn't go much over 500 though as it may cause problems.. I am really not sure.. Changing it higher is done at your own risk.

Yeah, its a win2k server.

Im up and running now (my guess is ASP wasnt installed, but he did not say), but am not having luck with any of the email.  I contacted my host to see what is available and have yet to hear back.  Do you generally recommend people to run CDOSYS?

Ive been reading through the docs, and the users and protection seems to be pretty straightforward.   Nice!

The only other real question I have (and cant find in the docs) is how to remove the self registration option all togehter.  My client wants to add its users manually, and not give the option for them to sign up themselves.  Do I just find any remove any code that references it?

I think I've found the problem..

The password "abcdefgh" works

The password "abcdefghi" does not

(username "ace45")

Passwords can obviously only contain up to and including 8 characters... By some coincidence I only used short passwords with MS Access.

  Hi, we purched ASP Protect a few months back and had it installed on our hosting company under a "temporary" domain name -- cidrasensors.com

We are now about ready to switch this development site over to production and I need to change the domain from cidrasensors.com to cidra.com

My hosting company wants us to create a new accounting and re-set everyting up.

So...based on this, I have a few questions for you:

1. Do I need to re-install the software? or can I copy from one account to the other?

2. Assuming I can copy the software to the new account - are there changes that will need to be made to point to the new domain?

3. If I decide I wanted to keep the first account alive for development purposes (never turn on the website domain to the public) - would I need to have a seperate ASP Protect license? 

4. If I decided to ask you to do the transfer for us - is that covered in the $20 Installation fee I saw on the web?