I have reviewed the permissions requirements for folders from the support documentation but do not see the 'internal guest' account shown in our system to allow internet access to read/write to the access database. 

How else can we locate the proper account (or is it possible there is none?) to use to allow permissions to access the Data directory if it doesn't show up as 'Internal Guest'?

These are 4 valid examples of calling a flash movie.

The more simple examples may cause problems for people that don't have the flash plugin installed. I really do not know as I am no flash expert. All these work fine for me. Of course I have the latest flash plugin installed. Perhaps some of you can shed some light in this. The 3rd and 4rth examples are obviously only slightly different and mention different versions of flash as far as downloading the plugin goes.

<EMBED src=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf" WIDTH="468" HEIGHT="60">

<object width="120" height="22">
<param name="movie" value=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf">
<embed src=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf" width="468" height="60">
</embed>
</object>

<OBJECT classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase=" http://download.macromedia.com/pub/shockwave/cabs/flash/swfl ash.cab#version=6,0,40,0"WIDTH="468 " HEIGHT="60" id="myMovieName">
<PARAM NAME=movie VALUE=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf">
<PARAM NAME=quality VALUE=high>
<PARAM NAME=bgcolor VALUE=#FFFFFF>
<EMBED src=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf" quality=high bgcolor=#FFFFFF WIDTH="468" HEIGHT="60" NAME="mybannername" ALIGN="" TYPE="application/x-shockwave-flash" PLUGINSPAGE="http://www.macromedia.com/go/getflashplayer">
</EMBED>
</OBJECT>

<OBJECT classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase=" http://active.macromedia.com/flash2/cabs/swflash.cab#version =4,0,0,0" ID=banner WIDTH="468" HEIGHT="60">
 <PARAM NAME=movie VALUE=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf">
 <PARAM NAME=quality VALUE=high>
 <PARAM NAME=bgcolor VALUE=#FFFFFF>
 <embed src=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf" quality="high" bgcolor="#3CBDCD" WIDTH="468" HEIGHT="60" TYPE="application/x-shockwave-flash" PLUGINSPAGE=" http://www.macromedia.com/shockwave/download/index.cgi?P1_Pr od_Version=ShockwaveFlash">
</OBJECT>

Not sure because of the nature of the javascript method

for starters tighten up the html around the banner call

change

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<!------- ASPBanner Ad code ------------->
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >

</td>

to

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >
</td>

If that doesn't help I would suggest using the ASP 3.0 version of ASPBanner. It can serve banners to a any type of page extension and it runs just as well as the .NET version. There is a new iframe method for calling banners that you can try instead of the javascript. The iframe method is explained in the ASPBanner Unlimited section of the forum.

I need to use SQL for other reasons than efficiency.  If I create 2-seperate databases, would there be a lot of code to edit?

Thank you.
Lance

thanks.. it was not taken as a complaint.
I just wanted to explain

When you said you tried using the web version of sql manager. Did you use the microsoft one I link to here "just curious"

http://support.cjwsoft.com/code/moreinfo127-1.htm

Hi,

Sorry, but the way the system works you can not call an individual banner like that. It just not something the system was meant to do.

If you wanted a specific banner to show up at all times you would have to make an individual banner and a zone just for that.

After looking at your site since you have so many banners there I dont know if that is the greatest option for you. It would also put a lot of stress of the Version 7 software because it is not really meant to call so many banners zones at one time on one page.

If you could live with tracking clicks on the home page but not displays I would suggest making banners for the home page in one zone. Then hard coding the banner images into your homepage like you already do but linking to the tracking part of aspbanner instead of where they would usually link to. That way you could at least track clicks and there owuld be no performance issues.

for example.. one of the images might link to
http://www.poconocommuter.com/aspbanner/banner_redirect.asp? Banner_ID=4

which would track clicks for you.. and then send then wherever they are supposed to go

If a picture does not show after uploading it is one of the following things.

The upload method chosen is not supported on the server
or
The physical path specified to the pictures folder is not correct.
or
The URL to the Pictures folder is not correct.
or
Permissions to the pictures folder have not been set properly


Here is more information on how permissions are set.

http://support.cjwsoft.com/code/moreinfo136-1.htm
http://support.cjwsoft.com/code/moreinfo56-1.htm

Without more information and the settings you have entered and chosen that is all I can offer for now.

Ok, if the link to the import/export screen does not show up its probably because you never put the import/export path in the admin settings?

go check that for me.

cause running that page without a path for the files could cause a timeout.. thats why the link doesn't show if the path is not entered (so people won't run it)

it looks sorta like this (there will be a field to fill in which wont show here)

Settings below specify the physical directory path of the export directory. This is used by the system when using the import/export feature. The export directory needs modify permissions for the anonymous webserver account.
ExportDirectory

1st off, what application is this in reference too?
This question should be under that application's area in the forum.

2nd, really need more information and details. There are many ways and methods to send emails and they can all effect what gets delivered and what does not. All on an email server side of things. (I always recommend using the CDOSYS option using SMTP authentication with a real external email that has valid MX records) see my article...
http://www.powerasp.com/content/new/sending_email_cdosys.asp

3rd, your not telling me how many users we are talking about. ASP is not a very efficient way to send emails and extremely large amounts of users should be sent emails in a different way then from an asp application. It is just the nature of the technology being used. Some of different emailing methods the application supports may or may not give you better results. It is really best to experiment though honestly the option I mentioned above is always the best in my experience.

4th, if you are not getting a timeout or a scripting error than the ASP part of things is making it through the amount of users. You have to remember that often time emails that get sent out from web sites end up in junk filters for whatever reason. That is just another fact and why it it is usually best to send out serious newletters using a stand alone application like WorldCast or something.

I am doing a lot of guessing here because you really did not tell me much. I also still am not sure what application this is in reference to as 3 of my apps have newsletter features of sorts.

That bit about zones makes perfect sense and seems surpassingly simple for me to integrate due to our categories and page contents being based on the same if/then functionality.

Regarding the user, I guess you mean that I could simply recreate a limited admin interface for users based on the interface you have included for me, is that correct? I realize how subjective the question is, but do you think that this would be a bad idea?

I'm leaning toward your software here. I have a budget that could easily cover a variety of programs, but the UI for advertisers at banmanpro, for example, seems far too complicated for my users. Also, banmanpro doesn't have supporting compatible softare I am interested in, such as your classifieds software.

I guess I am trying to buy a good shell from which I can do my own customization and coding, and into which I can integrate future additions such as your classified ads. Does this seem like the right place to be?

Thanks much for your time!

Chris,

I've given the IUSR account modify access for the aspprotect folder.

In the ODBC manager module on the webserver I've taken out the aspprotect access driver option.

The dataconn_inc.asp line reads as

ConnectionString = "DBQ=D:\missourirealtor.org\members\aspprotect\data\database \ASPProtect_access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

Now this should make it DNS-less correct? with the permissions set properly?

I've also taken out the password on the access database.

The original database of users I had was an access database from a different program called spooky login.  I exported them into a tab delimited file and changed the column headings to match those in aspprotect exactly.  Actually access would not let me import them in the databases without them being exact.

I imported that information directly using access's import options.  I tried the import/export manager in aspprotect but kept timing out as well.

Our knowledge base which is hosted at a remote location is protected by ASPProtect Full Version 6. I would like to allow our employee to access the knowledge base from within our internal network unchallenged. Is there a way which I can modify the code "check_user_inc.asp" to allow any one coming from say 10.1.X.X to access the site unchallenged?

Thanks,

Mo

UPDATE

Version 8.1 has code generators for these new methods built in...

When I enter www.vickerylightning.com/aspgallery/dataconn_inc.asp on the screen it says "Not a valid bookmark"

as far as that goes I have no idea.. I have never seen that message before but you are not suppose to run that page by itself regardless.. it is an include file not meant to run on its own

in that file "upload_post.asp"

change

<%
If Session("Admin") <> "True"
 Response.End
End If
%>

to

<%
If Session("Admin") <> "True" Then
 Response.End
End If
%>

That carrot doesn't really exist in the file, so I'm not sure.

I did download and place the ASPTEST file in www.drsweisberg.com/asptest and when I try to load the 2 pages it fails to load.  I have another site on the same server and I uploaded the same exact set of files and the asp pages load.  www.klarman.com/asptest

http://www.drsweisberg.com/asptest/server_info.asp

http://www.klarman.com/asptest/server_info.asp

This is how I set the connection:

ConnectionString = "DBQ=D:\clients\rklarman\klarman\asptest\_database\asptest.m db;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

ConnectionString = "DBQ=D:\clients\rklarman\drsweisberg\asptest\_database\aspte st.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

This is great FREE SQL Server Web Data Administrator App from Microsoft..

http://www.microsoft.com/downloads/details.aspx?FamilyID=C03 9A798-C57A-419E-ACBC-2A332CB7F959&displaylang=en

It is an ASP.NET web application that you install locally on your development server and then use to connect to a SQL database whether remote or local.

It can do nearly everything enterprise manager can do.

I have tested it and it works great for me.

yes. what you are talking about has to do with norton ad blocking software.. it blocks images or paths that have the word "ad" in them.. and you see red x's where images should be on web sites.. usually

it is different then what this thread initially mentions which has to do with a code/server issue with the application variables.

If you still cant see the upload buttons after checking the settings send me a PM with the info and I will take a look at your installation. It will have to be up on a live server of course.

Session.LCID = 2057

I'm using Aspimage and SQL. Photos are 2464 x 1632 px, tried the upload and import directory methods, same results: thumbnails ok, full images 0 bytes.

ServerSoftware Microsoft-IIS/6.0
ServerName www.larrysampas.com
ServerProtocol HTTP/1.1
PathInfo /gallery2/extras
PathTranslated d:\Customers\user1095000\www\gallery2\extras
 
FILE SYSTEM OBJECT Installed
ADODB (ActiveX Data Object) Version: 1.2 Installed  
CDONTS Version: 2.80 Installed  
SMTPMail Version: SMTPMail Retail Version V2, 2, 1, 0 Installed  
JMail Version: 4.1.2 Installed  
AspEmail Installed
AspMail Installed
SAFILEUP Installed
Dundas Upload Not Installed  
ASPImage Version: 2.31 Installed  
AspJpeg Not Installed  
ImgWriter Not Installed  
 
Script Engine 
Type VBScript
Version 5.6
Build 8515

It does not matter what directory name the ASPProtect files and folders are in but you cant go moving around critical file and folders like it appears you did nor is there any reason to.

All that is is saying is that the users folder, the password_admin folder, the scripts folder, the check_user_inc.asp file, and all the other files and folders that come with the system can be in any directory name as a whole.... but that doesn't mean you can go messing around with the files and folders in that directory.

I assure you 100's of users do not use "aspprotect" as the main folder name and they have no issues doing so.

Regardless, you need to explain in much clearer detail exactly what you did and what paths you used and what is where.  At this point I really do not know what is you did as your post was not clear to me.

You should also check that you have entered correct path info in the admin settings page area. The register page is one of the paths that geths set there.

IMPORTANT UPDATE - READ THIS
http://support.cjwsoft.com/forum/forum_posts.asp?TID=205& ;PN=1


The IPN Subscription Pack which is built in to ASPProtect 7 contains all the pre-built scripts you need to implement PayPal IPN Subscriptions with ASPProtect. IPN stands for (Instant Payment Notification). It allows you to set up scripts on your server so whenever a PayPal payment is processed the PayPal server sends info to your server regarding the transaction and vice versa. This is a fully automated process and allows you to charge users for access by the month or however long you like.

The Subscription feature of PayPal handles recurring billing automatically. The PayPal server will communicate with the ASPProtect system and keep everything up to date with users and their subscriptions.

This Support Pack basically gives you an additional signup and registration directory "paypal_sub_signup" and it should not interfere with any changes or customizations you have made to your ASPProtect setup. New users can register in this directory and sign up for a subscription at the same time. Existing users whether active or expired can be sent to this directory where they can lookup their account and start a subscription. You can also assign various Access and Group Levels during signup and you can set up various prices for various amounts of time as well. This is a real-time setup for the most part. As soon as a user pays via PayPal your system is updated and they will have access.

To use this all you need to do in ASPProtect 7 is enter your PayPal account name into the settings screen. It will be an email address. You'll need a business or premier account with PayPal and you will need log into your PayPal account and turn on IPN in you profile. They make you enter a default IPN URL. We do not use that so if you already have something there leave it there. If you dont have something there you can type in any the full url to any page on your server. It's probably best to send it to an empty ".asp" page or something.

Changing Payment Options

In the "paypal1.asp" file there are some sample payment options set up.

They look like this and you can have as many as you like.

<!-- Begin Payment Option Code -->
<form action="https://www.paypal.com/cgi-bin/webscr" method="post" target="_blank">

<% Label = "Membership (1 Month) $9.99 Recurring" %>
<!-- Begin Form Fields You Can Edit.. See PayPal Subscription Manual For Details -->
<input type="hidden" name="no_shipping" value="1">
<input type="hidden" name="no_note" value="1">
<input type="hidden" name="a3" value="9.99">
<input type="hidden" name="p3" value="1">
<input type="hidden" name="t3" value="M">
<input type="hidden" name="src" value="1">
<input type="hidden" name="sra" value="1">
<!-- Field Below must have 2 commas First two values are optional (access level,groups,user ID)-->
<input type="hidden" name="custom" value=",,<% =User_ID %>">
<!-- End Form Fields You Can Edit.. See PayPal Subscription Manual For Details -->

<!--#INCLUDE FILE="form_data_inc.asp"-->
<input type="image" src="https://www.paypal.com/images/x-click-but20.gif" border="0" name="submit" alt="Make payments with PayPal - it's fast, free and secure!">

</form>
<hr>
<!-- End Payment Option Code -->
 

To really understand what these form values mean it is best to look through the PayPal Subscriptions Manual which is a PDF file you can get from the PayPal Site.

This link was valid the last I checked...
Subscriptions and Recurring Payments Manual

It also may be helpful to use their wizard to create some subscription buttons with different settings and then look at the code generated.

Bascially these are the important ones..

a3 - amount to billed each recurrence t3 - time period (D=days, W=weeks, M=months, Y=years) p3 - number of time periods between each recurrence

The custom field is something we are using to send info from ASPProtect to PayPal.
it allows you to set the access_level or groups access (groups support require the ASPProtect Option Pack)

<input type="hidden" name="custom" value=",,<% =User_ID %>">

or this example where we are setting the access_level to (2) and also giving the user access to groups (3 and 4)

<input type="hidden" name="custom" value="2,*3*4*,<% =User_ID %>">

Here is how it works.
The value setting (red) is essentially and array that can be made up 3 elements separated by comma's

access_level,groups,User_ID

If you do not want to set the access_level or groups access.. then you don't even need to edit the setting.

Values must be separated by a comma even if there is no value and there can be no spaces.  If you didn't want to set an access level or groups there would still be 2 commas at the beginning.  etc etc
Basically there must always be 2 commas but you only have to set last values which is the User_ID from the ASPProtect system.

The 1st value is the access level you want to user assigned to.
The 2nd option is the groups you want the user assigned to. (requires option pack)
The 3rd option is the User_ID which the system takes care of. Do not edit this option. Leave it as <% =User_ID %>
 

I finally spoke with someone who knew what I was asking for and they set the rights and all is fine.

Thanks for your help. Wish all business' had customer support like here

If you would like me to, I also have no problem going into your machine real quick via remote access and setting permissions / putting the right connecting string in there for you.

I need to go in as an administator though to set the permissions.

In a way your questions are confusing to me, but here is some information regardless.



Using Active Sever pages you can not protect entire folders. It is simply not possible. ASPProtect is Active Server Pages scripts so it can only protect individual ".asp" files.


If you are concerned about customers downloading the access database..

best practive is to store it in different folder name than it came in
best practive is to give the database .mdb file itself a different name
best practive is to change the password on the access database
best practice is to store it in a directory that is not part of your web if possible.. many of the better hosting companies have it set up so you actually can do that

the more of these things you can do the better..

And if you are really worried about security you should use a SQL Server database which nobody can download from your website under any conditions because your data lives in the sql server and unless they get the username/password to it they can not access it.

I'll try to help when I get back tues night,, see the contact page for info on where I am
http://www.cjwsoft.com/contact/default.asp?Subject=CJWSoft+G eneral+Inquiry

It sounds like permissions... to the database folder specifically
they are not correct

It could also be that your odbc drivers are very new and you are not using a new enough version of the access Database. I recommened using the 2002-2003 verison of MSACCESS


Now.. if using a SQL Server Database permissions to certain tables are handled in enterpise manager