1st off, what application is this in reference too?
This question should be under that application's area in the forum.

2nd, really need more information and details. There are many ways and methods to send emails and they can all effect what gets delivered and what does not. All on an email server side of things. (I always recommend using the CDOSYS option using SMTP authentication with a real external email that has valid MX records) see my article...
http://www.powerasp.com/content/new/sending_email_cdosys.asp

3rd, your not telling me how many users we are talking about. ASP is not a very efficient way to send emails and extremely large amounts of users should be sent emails in a different way then from an asp application. It is just the nature of the technology being used. Some of different emailing methods the application supports may or may not give you better results. It is really best to experiment though honestly the option I mentioned above is always the best in my experience.

4th, if you are not getting a timeout or a scripting error than the ASP part of things is making it through the amount of users. You have to remember that often time emails that get sent out from web sites end up in junk filters for whatever reason. That is just another fact and why it it is usually best to send out serious newletters using a stand alone application like WorldCast or something.

I am doing a lot of guessing here because you really did not tell me much. I also still am not sure what application this is in reference to as 3 of my apps have newsletter features of sorts.

this could go on forever...

if you want PM "private message" me info to log into your site.. show me the pages we are dealing with...

and I will take a look at it all...

CJW

If you are using an ACCESS Database try to avoid using a system DSN. They are much slower because they go through ODBC which then uses the Jet Drivers to access the database. They also have to do a registry lookup.

ttp://www.4guysfromrolla.com/webtech/070399-1.shtml

http://www.powerasp.com/content/database/dsn_vs_dnsless.asp



It's funny because in the 4guys article they ask the question..

"Hmmmm... so who was right, Microsoft or Wrox?"

I'll tell you who was right and who said it 1st.  It was me and I said it on my old powerasp.com site before anyone else ever did.

I found it out on my own by experimenting when I was the Systems Analyst for an large ISP. We we had web servers that were not running well. I didn't read about this solution anywhere because no one was talking about it at the time. Microsoft said use System DSN's so everyone just took their word for it.

I took a lot of heat for saying that back in the day but over time everyone started saying it.

IMPORTANT UPDATE - READ THIS
http://support.cjwsoft.com/forum/forum_posts.asp?TID=205& ;PN=1

The IPN Support Pack which is built in to ASPProtect 7 contains all the pre-built scripts you need to implement PayPal IPN with ASPProtect. IPN stands for (Instant Payment Notification). It allows you to set up scripts on your server so whenever a PayPal web accept order is processed the PayPal server sends info to your server regarding the transaction and vice versa. This is a fully automated process and allows you to charge users for access by the month or however long you like.

This Support Pack basically gives you an additional signup and registration directory "paypal_signup" and it should not interfere with any changes or customizations you have made to your ASPProtect setup in general. New users can register in this directory and pay for membership at the same time. Existing users whether active or expired can be sent to this directory where they can lookup their account and buy additional membership time online. You can also assign various Access and Group Levels during signup and you can set up various prices for various amounts of time as well. This is a real-time setup for the most part. As soon as a user pays via PayPal your system is updated and they will have access.

To use this all you need to do in ASPProtect 7 is enter your PayPal account name into the settings screen. It will be an email address. You'll need a business or premier account with PayPal and you will need log into your PayPal account and turn on IPN in you profile. They make you enter a default IPN URL. We do not use that so if you already have something there leave it there. If you dont have something there you can type in any the full url to any page on your server. It's probably best to send it to an empty ".asp" page or something.

The 1st value is the amount of days.
The 2nd value is the price for the amount of days.
The 3rd value is the access level you want to user assigned to.
The 4th option is the groups you want the user assigned to. (see PayPal subscription thread for examples of specifying group info)

Now, the label for the option in (blue) can say whatever you like.

Well, I assumed I'd be able to tweak this thing but it is all so intertwined it doesn't pay to mess with any of the files. Hence, I'm going to have buy a different system only a week or two after buying the unlimited version here.

As I leave I want to give you some impressions here. While the system is low-cost, the 99 dollar version is missing a few pieces that I think would bring the value to 99. It is one thing to talk about the speed/performance, but to a degree that's hard to measure, and to anyone with web advertising on their site, performance will always run second to potential site income.

It definitely needs a user interface and registration for advertisers, and it definitely needs a single variables file for changing the hundreds of variables for which there is no control. I had to search on my own just to change the look and feel.

Lack of multi-zone support is a serious drawback. I would submit that anyone with a serious website needs it, and will gladly pay you 139 over 99 for just that one feature.

Take them or leave them, they are just suggestions.

ok, I am home.. missed flight.. just got home an hour ago.

lets see.. I really need more info...

For starters are you using the delayed stats feature ? that is expirmental and could cause that problem

Hi,

You see, an include file is no different then a link to an image or graphic. The path to the include file must of course be valid. That file isn't in the same directory as that page so you get an error.

You simply need to make the call to the include file valid.

See my article on server side includes.
http://www.powerasp.com/content/code-snippets/includes.asp

You should also look at some of the provided example pages and see how the paths to the include files are done.

You can also use a virtual include if you figure out the page for that. See my article for the difference between a file include and a virtual include.

The code generator in the admin area shows examples of both but depending on your site structure the paths may need to be slightly edited.

Server Side Includes are a fundamental part of using ASP and they are used a lot. Once you understand how include files are used you will think it is the simplest thing.


More articles on server side includes

http://www.w3schools.com/asp/asp_incfiles.asp

http://www.4guysfromrolla.com/webtech/faq/Beginner/faq6.shtm l

http://www.minwar.com/24

that would probably work...

any ".aspx" page can grab that data after someone logs in..

Session("Username")
Session("User_ID")

etc etc

anything you see set in the "aspprotectlogin.aspx.vb" file will be there

any data not set there would have to be added and then the project recomplied so that data gets saved...

New Features added to 7.x

1. Entire application gone through and updated.
2. New graphics, new look and feel
3. Passwords and Cookies are now encrypted using separate keys individual to each customer install.
4. Groups Feature... powerful way to protect pages based on group access
5. Ability to upload a picture for each user.
6. New printable profile user screen.
7. Supports 13 email components as well as outgoing authentication for a few of the email components
8. New Lockout option. "However many" try’s to login and you are locked out for a certain amount of time.
9. PayPal signup routines for both single payments and subscriptions integrated into the application. Everything is handled automatically. Charging for membership couldn't be easier. 
10. New Newsletter Feature allows you to send newsletters to those subscribed. 
11. New ability to Email users soon to expire
12. HTML emailing for people using CDOSYS. This includes an inline html editor so you can send out some really professional looking emails.
13. Ability to redirect a user anywhere on 1st login
14. Option to turn off Login Remember Me Feature
15. Login Form now very easy to edit
16. All paths for places that need permissions can be easily changed.
17. Works with Parent Paths Disabled on the web server.
18. Company Name is now an optional field
19. Handy javascript popup date selectors
20. All date functions now internationl date friendly
21. Password conversion routine to upgrade existing users to the password encryption
22. Import / Export of user database built in
23. Protection Code Generators
24. Notes Feature. Javascript Popup on users screen that allows you to quickly see information without going to their edit screen
25. Mass email users incuding ability to send them usernames and passwords all at one time.
26. Option to not allow concurrent logins by the same username
27. Optional feature to keep track of recent users that have logged in as well as allow you to view the information.
28. Optional feature to keep track of recent users that have logged in, what pages they accessed, and when, as well as allow you to view the information.
29. Ability to protect other files types other than just protecting the viewing of the ".asp" pages. We provide working example code showing you how to protect images and file downloads in your protected ".asp" pages. You can protect nearly any type of file from downloading and viewing. (gif, bmp, jpg, zip, exe, pdf, rar, mp3,etc..)

ok, I just sent you a private message with download information.

replace you existing

"check_user_inc.asp"

"admin/check_admin_inc.asp"

"admin/email_user.asp"

with the new versions in the download

Do some testing to make sure that HANNAH password works ok for you.

Hopefully this cures the issue...
If it works ok for you for a while I will offer the fixes to everyone and start using this code from now on

BTW:
"admin/email_user.asp" had an unrelated bug in it that only happened if its error handling got triggered... it was posting back to the wrong page when that happened and causing an error

To hopefully wrap this thread up...

This user showed me his site and things were working for me as they should.

We came to the conlusion that the weird behavior he was experiencing was because he was using AutoComplete in Internet Explorer....

It was automatically filling in the fields with his username/password that he had autocomplete save.

So it was a web browser usage issue.. not the code.

when you get back to work.. your   "redirect.asp" needs the password include file at the top of it.. or that wont work either..

and of course those pages you send people to all need to be repaired

just leave the databse where it is, use the connection string generated for you and most importantly... put in a request with alentus for permissions to be set

tell them "D:\Websites\www.mysite.com\aspprotect\data" and all of its child folders need change permissions (r,w,x,d) set so aspprotect can do its thing

until the permissions are set that connection string can not work

this is all noted in the installation docs...

Understood.... can you point me to a place where there are other methods of calling banners?  Do you mean not use Flash?  I am new to this and will need some pushing over the cliff!

Thanks

Dave

Chris,

I have had a couple of users log out of the system as they are supposed to, move to another computer and not be allowed to login because of "they are currently logged in using another IP address" when in fact they logged off properly.  Is there anything that they should be doing differently?

Thanks,

Jess

If you have found out that parent paths are disabled on the web server you can still use the application.

Before you continue.

If it is your server consider enabling parent paths to solve the problem.

If it is not your server consider asking them to enable parent paths for your web site to solve the problem.

If that is not possible please download this zip file.
2005-02-20_150703_aspprotect_v7.x_alternate_include_file_pat hs.zip

This zip file contains 3 sets of alternate files depending on your situation. You simply replace your existing aspprotect v7.x files with these new ones.

The zip file contains the following folders and files.

Below is the contents of the readme.txt file which explains everything.

The following folders each have a version of all the files in the ASPProtect system that might need to be edited in case you need to change the paths for the server side include files. There are 3 different scenarios.

(parent paths enabled) - This is the way the application comes.
The files in this folder have FILE server side includes containing "../" information. While these includes will work when the applicaion in is any location of a website they will not work if parent paths are disabled on the web server. Generally you will want to use these on your xp development machine. You can of course use them on your real server if parent paths are enabled. Parent Paths are now disabled on II6 by default and some hosting company will not enable them.

(domain root)
The files in this folder have VIRTUAL server side includes in them.
These includes only work when the applicaion is installed in the root of your web domain. For example if your domain was called "www.somedomain.com" the following aspprotect files and folders would end up like this
"http://www.somedomain.com/check_user_inc.asp"
"http://www.somedomain.com/password_admin"
"http://www.somedomain.com/users"

(domain directory)
The files in this folder have VIRTUAL server side includes in them.
These includes only work when the applicaion is installed in a directory called "aspprotect" in the root of your web domain. For example if your domain was called "www.somedomain.com" the
following aspprotect files and folders would end up like this
"http://www.somedomain.com/aspprotect/check_user_inc.asp"
"http://www.somedomain.com/aspprotect/password_admin"
"http://www.somedomain.com/aspprotect/users"
You can change the name of the "aspprotect" directory but you will will have to edit the includes in the files.

Lastly, if you are on a local machine and insist on using the VIRTUAL INCLUDES you would also use the (domain directory files) even though you dont have a domain on your local machine most likely
For example if your site was installed like so.
"http://localhost/aspprotect/check_user_inc.asp"
"http://localhost/aspprotect/password_admin"
"http://localhost/aspprotect/users"

<compilation defaultLanguage="vb" debug="false" />

change it to this

<compilation defaultLanguage="vb" debug="true" />

When you run the code in a production environment change it back though

More Info
http://support.microsoft.com/default.aspx?scid=kb;EN-US;3061 56

Using "Email Authentication" as a registration option you cannot do that. There is no possible way I know of to have a delay on the authentication email like that. Also that method is not intended to involve any sort of manual registration like what you are doing.

Because you want to review people manually you need to change to registration process to "manual" and then send the email out manually from the users screen after making a user active.

ok...

you got problems if you cant import a file created by the system..

You using SQL or MSACCESS and do any of the users data have apostraphes in it ?

If you need to know how to enable them on your test server.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=5&P N=1

That is by design, removing and deleting are two different things as far as the classifieds system goes.

A regular user can only remove an ad from the category index. (which makes the ad inactive)

An admin however can truly delete an ad from the system.

When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner. 

The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though) 

Really the best way to show it is with an example as seen below.

Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.

All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser, 

The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser. 

In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.



On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.

http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html

This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code. 

This is amazing. You replied to question within minutes. Thanks for showing such a professionalism.

I am having problems accessing the admin site at the following URL:

http://www.drsweisberg.com/password_admin/default.asp

It brings up the login page, but when I enter the admin/test, it times out.  The DB is the copy with no password and it resides in a directory on the same server hosting the site but it is not in a folder viewable by web users.  This is how the dataconn_inc.asp is set:

<%
'*** Below are the only two settings you need to edit in this file
 
ConnectionString = "DSN=drweisberg;Driver={Microsoft Access Driver (*.mdb)}"
DatabaseType = "MSACCESS"
%>

The ODBC is setup and the IUSR has read/write/modify permissions.

Any help would be greatly appreciated.

Version 8.1 can work with MySQL
http://www.aspbanner.com/aspbanunlimited_v8.asp
It is just not supported at all.

The standard version can not work with MySQL.
There were a lot of changes to make the new version work with it and I really only did ift because I have a couple friends with busy sites that could only use MySQL.

It sounds like your site is way too busy for using an access database as you mentioned.

BTW.. I dont know what is going on But I keep getting all these returned emails. My forum is sending you emails and they are coming back as undeliverable saying your storage space is exceeded on your server.

Alternate Method to call banners from non ".asp" pages.

<iframe src ="http://localhost/aspbanner/aspbanner/aspbanner_inc.asp?Ban nerZone=4" width="468" height="60" frameborder="0" marginwidth="0" marginheight="0" scrolling="no"></iframe>

Be sure to delete the space in the BannerZone variable above. I am not sure why it is doing that in this post.

You can try calling the banners in an simple iframe like so.
This method should work much better than the javascript method because users with javascript turned off will still see the banners. You also will not have any of the limitations the javascript method has. Iframe is now supported by most recent browsers so it is now a good solution. Here is a chart that shows which browser versions support iframe.

Be sure however to edit the height and width values accordingly as that is very important.

1) Does everything, i.e. every user, every category, every product, etc., get stored in just one single database, or are there multiple databases at work and are linked to one another?  I am asking because there is only one table in the DB, and it is the "Users" table.  So I am presuming that there must be other databases that are linked to the DB.  Is this correct? 

2) Are user-level security permissions utilized in the sample Access DB that is shipped with the software?  I am asking because we cannot seem to remove the "temp" password no matter what we try, and this is the only reason I can think of. 

sure and thats probably what you should do... that pure asp upload thing must not be able to handle the size of your import file... another thing which can very .. also some versions of IIS require registry changes to upload bigger files via asp code alone

When I add a user, I can not activat it.

It sends me back to log on and will now allow me to log in as admin???

I can restart the APP and log in as Admin, but the user I added

is still not activated??

My system will also not allow me to set the Stay Loged in FLag.

It just ignores it....