that is because passwords in the import/export files are encrypted.. if you make one of your own you need to use the rc4 function in the "config_inc.asp" to encrpyt your passwords just like the aspprotect system does (requires knowledge of vbscript and integration into your export system)

now, there is a way around this

if you want to import a file you made with clear text passwords edit "import.asp" beforehand and change

 If UserArray2(5) <> "" Then CmdAddUsers.Fields("Password") = UserArray2(5)

to

 If UserArray2(5) <> "" Then CmdAddUsers.Fields("Password") = RC4(UserArray2(5), PasswordEncryptionKey)

that way it should convert your clear text passwords to encrypted while it does the import

this post also addresses this but in the reverse scenario
http://support.cjwsoft.com/code/code_info.asp?TID=261&PN =1&TPN=1

I hope this helps you because I really do have to leave the office like right now. Very late for a dinner meeting.

I should be back on the computer later tonight or tommoro morning

Is there an easy way to make this work with reoccurring a monthly or yearly subscription?

I appreciate the offer to beta test... but its really more a matter of me getting it ready..

I have a lot done.. but a lot of things are hard coded to only work on my machine and some things have not been sorted out. Giving it to someone else to test would be a waste of time at this point as I they probably couldn’t even run it.

Lately the reason this project has fallen behind has all to do with my main webserver where I collocate.

1st it got compromised (we think by certain competitors who are always up to no good)... then windows 2003 server which I decided to go with on the new server gave me random problems... then the Cisco hardware firewall was acting up and making the sites run slow....then SQL server attacks on port 1433 from Korea when I took the firewall down....and as of the last few days I think the server just needs a new power supply. I swear for the last 2 months I have spent more time administrating my servers than working on code. Yesterday it was locking up every 30 minutes. There have been a lot of days like that and it takes up all my time until I get it situated.  Especially since its over 100 miles to the collocation center. The APC unit I installed that allows me to remotely cut the power to hard reboot is a life saver.

Fun... I tell ya... and expensive.. (hardware, software, lost sales, and time) I am pretty much completely broke at the moment. It has been a very expensive few months.

But I like running my own servers... I run dns servers, email servers, sql servers, web servers.. I do it all. It's keeps me in touch with the latest software/hardware. Regardless , my servers ran well for years and they will again.


anyway.. hopefully I can actually get a new version of the photo gallery out before the month is over. It will probably be the last classic asp version. The version after that will most likely be ASP.net.

look in the "check_user_inc.asp" file

Thank you that did it !!

Hi,

1. Two months ago, we have set up to use the Subscription services exclusively for all new members and renews. and removed the regular payment service, a carry-over from v6.
2. Many from the "pre-subscription" service have yet to expire, thus have a populated expiry field.
3. With a 10 month bridge before we get all the members onto the Subscription service the "Send email to users that are soon to expire."
is used to remind these.
3. When members RENEW using the subscription service, the Expiry Field is not Nulled and they become targets for future reminders although they have renewed as Subscribers.

XYZ signed up on Nov. 05 2004, we send him a reminder in Oct 2005 and he renews as a SUBSCRIBER. His expiry date field is not nulled and he will keep getting notices although he has paid for another year.

Hope this is clearer... Thanks

Sorry, you cannot, that is how it works and that is how it has to work for reasons I am not going to try to explain as it is pretty technical. (it works the same way even when not using paypal and using email authentication... nearly every registration system out there does it that way under an email authentication scenario or a PayPal IPN thing.)

Basically, if you are concerned about it you need to periodically manually check for accounts that were never activated and delete them. Maybe when I get some time some day I will make a little interface to help find those and clean them up at once.

That was wrong of me but not what I meant. It seems as soon as I purchase something like this it doesn't work right and it can't be altered to work with what I have. The support ends up sucking or being none. Listen I’ve gone thru you're product and it's wonderful and does exactly what you say it does so that's a relief. Sorry about my ignorance with .NET but I’m from an ASP world and it's a lot different. You can see what I’m trying to protect here http://www.hotmixxent.com:8087/default.aspx. The final site after testing will be http://mxais.sfmx.org/default.aspx. Again thanks for the support on Christmas Sunday, that’s defiantly beyond the call and I appreciate it a lot.

perhaps the filesystem object is disabled on the server ?
or some sort of script blocking is running and causing a problem ?

other than that I can take a look if you put it up on a live server.

Trying to make sense of this.  I am still confused.  In the file config_inc.asp.  I found the setting for "uploaddirectory".  That entry looks like this [UploadDirectory = CmdGetConfiguration("UploadDirectory")].  I assume there is a config file where the value of upload directory is located. 

The settings in the config_inc.asp file have not been changed.  they are set to the way it was delivered.  Is there a document that gives instructions as to what and where the config settings are to be changes?

I'm trying to use CDOSYS.

It seems to work fine on the web page, however the mail never gets
delivered.

I can see my messages sitting in c:\inetpub\mailroot\pickup but they never leave it.

I found another folder after doing a search for "pickup".... it is:
d:\program files\Exchsrvr\Mailroot\vsi 1\PickUp     If I paste the files
into there, they get delivered.

How can I get the email to be delivered without doing the cut and paste?

I've tried it both with and without authorization.

I am running a Windows 2000 server with Exchange 2000.

Thanks.

Yes worked fine

thanks

I am having severe trouble with the SQL database connection for ASPlisting (generic version).

I have used all of the suggested connection strings but still get error messages such as:

[DBNETLIB][ConnectionOpen (Connect()).]Specified SQL server not found.

I have set up the tables in the database, although the database existed already with many other tables in it as it costs me per database per month so one has to suffice with many tables in it.

I use SQL a fair amount on my site but have not suffered any probs like this yet.

Any advise or help would be useful.

Upgrade from V6 to v7.x with an MSACCESS DATABASE

1st of all, backup your existing ASPProtect files and database before performing this upgrade. Please be really careful while performing this upgrade. Version 7.x  is a highly advanced application compared to any previous versions. CJWSoft under no circumstances is responsible if you lose information or have website downtime.

BOTTOM LINE: (PERFORM THIS UPGRADE AT YOUR OWN RISK)

To do this upgrade you're going to need to have the Microsoft Access Application.
To work with an Access .mdb file it can not be newer than the version of Microsoft Access you are running.

That being said, on with the upgrade..

Open you're existing Acccess Database up in Microsoft Access..
You should see this something like this.



By right clicking on then choosing rename
Rename "Users" to "ASPP_Users"
Rename "Groups" to "ASPP_Groups"

If you do not have a "Groups" table do not worry about it right now.

Now right click and DELETE the Config Table.
Yes, delete it..

You should now see this. (with or without the "Groups" table)



Now, right click on "ASPP_Users" and go into design view.
It should look like this.


Rename the "Password" field to "Old_Password"
Be sure to spell it perfectly using the Underscore
It will look like this.


Now scroll down to the bottom a bit It should look like this.



Now..

If you have a "Groups" Field... leave it alone
If you do not have a "Groups" Field add one and make it a memo field.

Now, we are going to add a few more new fields.

Add a field called "Redirection_URL" make it a "text" field with 150 field size
Add a field called "PayPal_Subscriber_ID" make it a "text" field with 100 field size
Add a field called "Newsletter" and make it a yes/no field
Add a field called "Password" and make it a "text" field with 100 field size

It should now look like this.
(you do not need to worry about the field descriptions.. that part is optional and only seen when working on the database)



Now close that window and save the changes..

Your now going to open up another Access Database while still leaving the one you have on your screen open. You going to open up one of the new databases that came with v7.x. This database has some info we are simply going to copy and paste.

You'll want to open it and put it side by side on your desktop like so.
(the old database is on the left.. the new one is on the right)



Now, for the fun part.

On the new database to the right.. right click on the "ASPP_Config" table and pick "Copy"

Then move your mouse over to the old database on the left. Right click in the open white area and click "paste"

It will ask you for a database name. Type in "ASPP_Config"
Leave "Structure and Data" checked and hit OK

Your old database on the left should now have a nice new "ASPP_Config" table.

OK, now for the "ASPP_Groups" table

If you already have a "ASPP_Groups" table in your old database you are done.

If you do not have one your going to copy and paste the table from the New Database to your old database just like we just did with the "ASPP_config" table.

Your old database should now look like this.



Now, you are done upgrading your database from within Microsoft Access.

The existing passwords still have to be encrytped and moved from the "Old_Password" to the "Password" field

To that we have a special page we run in the application that will take care of that.

So, for now... go install the application, but using the database we just created.
Follow these instructions for the most part...
http://support.cjwsoft.com/forum/forum_posts.asp?TID=181& ; ;PN=1

When you get to the part where you finally get into the admin area and need to make an admin account you will notice that your existing user database is there but none of the users have passwords if you look at them in the edit screen.

That is normal. Simply do what the instructions say and create and admin account using a username that does not exist..

Then log off... then back in as that new admin account. If that works you are ready to convert the passwords.

This part is very easy.

You want to run a special page via the browser.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

Replacing the part in blue with your website info.

Once you get the page running you will see a login prompt and one form field just like before with the "get_me_in.asp" page

You will need to paste the "PasswordEncryptionKey" value that you used in the "config_inc.asp" file in the form field and hit enter.

If all goes well you will see a page telling you to click here to encrypt the passwords and copy them over.

So do what it says... dont click more than once and wait.

Eventually it should say it is finished. So go log in to the admin area of the system using the new admin account.

Now edit some users but dont save... you want to see if the passwords are showing up. If they are the conversion worked. If you see nothing or a garbled mess it did not work and you made a mistake during this whole process.

If things went well backup and delete the conversion file below.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

You do not need it anymore.

Once you are positive every thing is running smoothly and everyone's passwords are ok you can go in and delete the "Old_Password" field as well.



If things didnt go well.. try again from scratch and go slowly.
If they still dont go well get ahold of us for help.

We are here to help, but if you really want us to we can be hired to do the conversion.

It's not normal at all. My guess you accidently edited the code in a bad way.

(thats the same code the every guestbook in every application I sell uses including ASPGuest which gets downloaded for free about 50 times a day)

No one has ever said it acted funny.

I would do a default installation with the original code somewhere and see if the problem occurs. If it does I can take a look.

In the meantime I wouldn't be running that as it is probably using up massive processor time because of whatever is wrong with it. 

ok, here's a test page:
http://www.galvinelectricity.org/download_link.asp

user: test
password: test

Our company just got new computers, so everyone here has the same set-up, all Dells, all about 3 weeks old, all Windows XP.

But I did realize after reading your post that I am using Firefox and everyone else was using IE. When I used IE, I was able to duplicate the error.

But, alas, I am unable to resolve it. Client will be using IE, no doubt.

Sorry, there is no option for that.

I'll take it into consideration, but the way the banner rotation logic works would make adding such an option very complicated.

Just give it  an expiration date way into the future if you do not want an ad to expire anytime soon.

I usually just make all my ads expire in like 2020 or something like that since I don't want them to stop running either on some of my sites.

You are not supposed to use "../" with a virtual include

Thats goes against what a virtual include is and makes no sense.
When using a virtual include you give the path as if accessing from the root of the main web / virtual directory

I find it very hard to believe it ever worked like that and if it ever did it was wrong.

Yeah, its working great witht he Access database. Now I just need to get it all set up. I like how the config file is set up with all the comments, it really helped allieviate the 40k thumbnails, .

this error really does not mean anything specific

Your browser must support a standard called RFC 1867. Please check with your browser vendor for support of this standard"

If you get an error its real weird that the file is being uploaded.
Generally if you get an error during upload it is because of one of these 3 things

Invalid physical path specified

Unsupported upload method chosen

Permissions

See my article on XP and permissions
http://www.powerasp.com/content/new/windows_xp_pro_and_permi ssions.asp

many people dont do their permissions right on XP Pro and that article covers everything

sure, there are reasons AOL would block the email.. it might think it is spam or it might not like the fact that fact that a cdonts generated email has no MX records because it can not..

for more on MX records read my CDOSYS article
http://www.powerasp.com/content/new/sending_email_cdosys.asp


as far as the emails not being sent because notifications are off. I was not aware of that and will try to look into it.. Version 6 is no longer worked on but if I can find the time I will check that out

I just did a quick google search... found a ton of info on how to find the setting. Here is one...

These are directions for IIS6 but the process is similar for IIS4-5

1. Click Start, click Administrative Tools, and then click Internet Information Services (IIS) Manager.
2. Double-click your computer name in the left pane, and then double-click Web Sites.
3. Locate the Web site and directory that houses the ASP application.
4. Right-click the application site or directory, and then click Properties.
5. Select Home Directory, and then click Configuration.
6. Click Options, and then click to select the Enable Parent Paths check box.
7. Click OK two times.

Hello,

If you are using ASPProtect Version 7 it is possible because version 7 supports html emailing. In any other version it would require some custom coding to add html email support. You would have to sort it out by experimenting and editing the emailing code. All the email methods have documentation on the web in some form or another showing how to send html emails.

Also,
sometimes depending on the email component being used and the email client reading the email a link in a text based email will get hyperlinked automatically. For example outlook usually will do that, but it doesn't always in other situations.

Lastly, we have special upgrade pricing should anyone want to upgrade to ASPProtect Version 7. It really has a ton of great features.

Best Regards,

Chris Williams
www.CJWSoft.com

like I said... you would have to modify the code
(and really I dont think it is possible, how could it be when images uploaded are of all shapes and sizes)

How are pictures of various shapes and size going to resized to a fixed width and height without distortion on either a horizontal or vertical level ? Uness the image uploaded matches the fixed thumbnail ratio you have set there is going to be distortion.

There is no component that is going to make it any easier. You are already using an image resizing component.

I give you two options the way the code ships.

fixed width and height for thumbnails

or

fixed width / dynamic height for thumbnails

The only other possible option would be

fixed height / dynamic width for thumbnails

and that you would have to code on your own because that option is not there

The last thing I will say is this. Sorry, but I do not support custimizations to the code. It's just not easy to explain. Its a lot of code work. Its a lot of time.

I would say that it isn't all that difficult using mySQL for the backend....the main thing is to make sure you set the primary keys for auto-incrementing in your database.  Alos need to make sure that any DELETE SQL statements are formatted like this

DELETE FROM tblName WHERE tblField=SomeValue

and not

DELETE * FROM tblName WHERE tblField=SomeValue

The same holds true for using MSSQL