It a generic error that means something is wrong with your data connection.

http://support.cjwsoft.com/code/moreinfo27-1.htm

http://support.cjwsoft.com/code/moreinfo136-1.htm

Hi,

First and foremost, a great product. I downloaded it last night and it took little effort to get it up and running

.....now a little question...

Has the software/code been tried out on a Mysql db and if so did it work?

The reason I ask is that my website is very busy (1.5million page views per month avg) and I'm considering converting the ASPBanner Access db to a Mysql one to help handle the traffic. For every page view one banner impression is being made which means that the Access db is under a bit of pressure

This afternoon there were 1012 simultanious users on the website and it froze with an error message displaying where the banner should have been (I didn't quite catch the message but something to do with the banner script timing out). I'm not sure if the Access db had something to do with it but it seemed too coincidental. Rebooting the server cured the problem but obviously kicked off the visistors as well
At present there's 668 online and no problems so I'll have to monitor it to see how it goes but if anyone can answer the Mysql question I'd be grateful

Thanks,

Dave

all I can say is try other things...  like

mail.yoursite.com

or

smtp.yoursite.com

etc etc etc

replacing yoursite with the name of your domain of course


the settings for sending email via ASP are no different then the settings you would use in outlook or something... except sometimes on the server level localhost works as the email server because they set it up to allow that

and of course those 3rd party emailing components need to actually be installed on the server

it is by design actually and something that can be improved
(I just never thought of it when I 1st designed the system and it is actually planned to be added in Version 8)

The trick would be to reset those session variables anytime someone edits and saves their information... not very hard at all

you would do it on the save code page for when a user edits themself.
you want to grab the info posted from the form and  reset each session variable at the same time everything is re-saved to the database

example

Session("Company_Name") = Request("Company_Name")

The only other thing I can think of if you are not getting any errors.

Is that you may have the path to the server include file correct but ASP server side code is not executing in that part of your web site.

You can do a simple test to tell if it is...

Make a simple ".asp" page in the same folder.

Put only this code in it.

<% Response.Write ("ASP is executing") %>

then run the page via the web browser thru the server..

If the text prints out ASP is running... if you don't see anything it is not

Ya, you must have tried to upgrade from a really really old version like you said which wouldnt really work out because those instructions are specifically for upgrading a version 6 database to version 7.

That line error you had was looking for the User_ID field and I bet the version you had was so old that you didnt have a field named that as a few years ago the field "ID" got renamed to "User_ID"

As for all the cool stuff... yup there is a lot of cool stuff in this version... glad ya like it so far

you can not limit image size using the pure code upload method. Its not possible using a pure asp method that I know of.

You would have to be using one the supported commercial upload components and edit the upload code accordinly to limit upload sizes (you would do this by looking through their documentation and samples) I didnt include any support for upload file size limitations with the supported 3rd party upload components because in my testing I found it problematic with all but aspupload from persits software. (I have example coe for that component I can provide that limits the upload size and seems to do it well) I am sure it could work with safileup and dundas as well but I gave up trying.

As for image resizing..
Image resizing requires the use of one of the supported 3rd party image resizing components. You didnt mention if you are using one or not. If you dont have one available image resizing is just not possible as asp can not do that on its own.

(Capcha Security Image Mod)

This mod will add a Capcha Security Image to the registration signup form.



Instructions:

Download the latest version of the ASP Security Image Generator from this site. http://www.tipstricks.org/

Unzip that download and copy "aspcaptcha.asp" and "aspcaptcha_distort.asp" into the aspprotect "users" folder.

Now edit "users/register.asp" with a text editor and add the code shown below in blue. The code to add goes near the bottom of the form right above the submit button. Just add the blue code. The code around it is shown to help you find the area of code where it gets placed.


    <tr>
      <td valign="top" align="right"><font face="Arial" size="2"><strong>
  Newsletter</strong></font></td> ; ; ; ; ; ; ;
      <td valign="top">
  <input type="checkbox" name="Newsletter" value="True" checked>
  <font face="Arial" size="1">Do you want to be subscribed to the
  newsletter ?</font></td>
    </tr>

    <tr>
      <td valign="top" align="right"></td>
      <td valign="top">&nbsp;<img src="aspcaptcha.asp" alt="" width="86" height="21" />
   <font face="Arial" size="2" color="#000000">Type the characters shown in image for verification.</font><br>
   <input name="strCAPTCHA" type="text" id="strCAPTCHA" maxlength="8" /></td>
    </tr>

    <tr>
      <td colspan="2" bgcolor="#FFFFFF">
        <p align="center"><input type="submit" value="Register"></p>
      </td>
    </tr>


ok, now edit "users/add_new_account.asp" with a text editor and add the code shown below in blue. Just add the blue code. The code around it is shown to help you find the area of code where it gets placed.

If User_Custom6_Used = True Then
 If User_Custom6_Required = True Then
  If  Custom6 = "" Then
   ErrorMessage = ErrorMessage & Server.URLEncode("You need to enter a " & User_Custom6_Name &".\n\n")
  End IF
 End If
End If
 
 strCAPTCHA = Trim(Request.Form("strCAPTCHA"))
 if strCAPTCHA = Trim(Session("CAPTCHA_" & Session.SessionID)) then
 else
  ErrorMessage = ErrorMessage & Server.URLEncode("You did not type in the verification info correctly.\n\n")
 End If 
 
If ErrorMessage <> "" Then
 Response.Redirect "register.asp?" & Request.Form & "&ErrorMessage=" & ErrorMessage
 Response.End
End If

Your done. You just added a Capcha Security Image to your signup form. If you would like a more distorted image that is more difficult for an automated program to figure out change the image tag to call the "aspcaptcha_distort.asp" page instead. It will look more like this.

Banners no longer show up on my site ?

If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.

The web server must have crashed or lost power and now the application variables are in limbo/not working.

I have seen this happen a few times.

Basically the application variable system gets messed up because it was not shut down properly.

The way to cure it is as follows.

Edit and save a banner in the system. Hopefully that gets things going again.

If this happens a lot it is a server issue, not ASPBanner's fault.

Hi Chris,

I have a small problem, I have installed asp photo gallery pro on a hosted site, and after eventually getting them to modify permissions on directories it is essentially working, except that it won't delete pictures from an album. If I delete an album the pictures are left in the pictures directory, but the album is no longer displayed. If I then make a new album it is labelled incrementally... ie I had one album "album_ID_1", deleted it created a new album it is labelled "album_ID_2". I would have thought that the new album would be called "album_ID_1" ie taking the place of the deleted one. It seems to me that the delete album function isn't fully working either. My hosting comppany swears that the permissions on the pictures directory are set to full access for everybody. What have I done wrong?

Thank you

Nigel

Hi, I haven't heard anything from you.

Has this issue been resolved ?

Thanks

Hey, I run a business and I will not have things like that mentioned in these forums.

How to set a new users expiration date.

You'll need to edit the "users/add_new_account.asp" with a text editor.

Find this section..

<%
CmdAddUser.Fields("ValidateEmailCode") = ValidateEmailCode
CmdAddUser.Fields("Access_Level") = "4"
' PUT YOUR CODE HERE
CmdAdduser.Update
ID = CmdAdduser("ID")
CmdAdduser.Close
Set CmdAdduser = Nothing
ConnPasswords.Close
Set ConnPasswords = Nothing
%>

You'll want to add code like this right between the Acccess_Level  and Updates section

CmdAddUser.Fields("Expiration_Date") = Date + 60

That will give take todays date and add 60 days to it.
You can of course do whatever you want here.

Actually, any database value for the user can be set during registration.

You can also change the default Access_Level to whatever you like.

grrrrrr

As far as the users thing... my fault that was setup wrong in the settings of the admin login page.

but still dont have a solution for what im trying to do

You cant do it from initial lohin, but you can do it from the time of registration signup.
http://support.cjwsoft.com/code/moreinfo170-1.htm

As for the emailing thing it is most likely an email sending issue more than a code problem. For example spam filters incorrectly grabiing those emails or something of that nature..

Best thing to do is try different things for emailing options until you get something that works. I suggest using CDOSYS with a real email server and using a valid email account for yourself at that email domain. SMTP authentication if necessary. This will ensure the emails sent have valid MX records and dont get treated as spam.

Is there any way to extend the limit multiple login feature to a certain number instead all or none?  In other words, i need to have a user be able to use the same login for x number of people.  My customers are institutions and want to be able to have a single login for however many users they purchase for.

Hi, I have not gotten anything from you about it.

click on the PM button below and send it that way through the forums.

Thanks

Triple check the upgrade instructions because I think you missed something important.

line 227 on "/password_admin/save.asp" refers to the "Password" field

the error your getting most likely means it is not there..

Pay close attention to the areas in the upgrade instructions regarding renaming your existing "Password" field to "Old_Password"

Then making a new "Password" field and carefully following the instructions needed to convert your old passwords for use with the new system.

If you don't everything carefully and perfectly this is the sort of error you will get.

I hear ya.. problem is it just does not fit into the banner rotation logic.

I know it sounds like a simple thing, but it is not because ASPBanner does it's rotation logic in a totolly unique way that no other system I know of does. It basically does everything in memory.

I just don't see anyway to do add what you are asking about without totolly re-writing how it works. The system would have to rely totally on complex (SQL queries / stored procedures) to do the banner rotation like every other poorly performing system out there.

It's really hard to explain, but I just no way I see to add it to the high performance application variable banner logic.  If I changed the system to not use those application variables there would be a tremendous performance loss because the database would be doing about 90% more work than it currently does.

As I have said before sacrificing performance is just not something I am willing to do.
http://support.cjwsoft.com/code/moreinfo144-1.htm

I built ASPBanner for performance and speed and that has always been it's main intention.

I leave the bloated features to the competition. If I lose sales because of it that is just unfortunate. I want the best performing system. The system I can be proud of. The system that can handle millions of impressions per day under a MSSQL or MYSQL installation and not even flinch. That is what ASPBanner is all about.

The other thing is pricing. The price is kept low partically because the feature set is low.

Maybe someday there will be a version with more features and less performace. I really do not know. Right now it's just not something I plan on doing.

I've encountered another problem.  When i edit the link for existing banners and save it, the banner reverts to the old link instead of the new one.

The directory where the the database is located to rwed so the permissions is not a problem.

Any advice?

Thanks

For some odd reason, the the export path has two backslashes (\\) at the end, thus generating an error each time I try to export. For example

C:\path\website\protect\data\export\\

This appears toward the bottom of the import_export_manager.asp page and is called by =ExportDirectory.

I checked under settings tab, no path ends with a "\". Any idea where else I need to look?

Nick

Hi,

I only just purchased the product and I would be very keen to

a) is the upgrade available very soon as I don't want to spend the time developing one and than find the other released shortly & 

b) would I only need to pay the difference for the upgrade or have I already downloaded the upgrade already.

I cant see what version I current have.

I look forward to your response.

I will actually explain how to set access_levels and/or groups...

in "users/add_new_account.asp"

all that docmunetation is online as well right here so you dont really need the chm file
http://support.cjwsoft.com/code/info24.htm

the chm format is a windows format that can only be viewed on windows pcs. I do not know why you can not see it. I would do reseach on viewing CHM files on whatever operating system and version you are running because perhaps you are using a mac or linux operating system which can not natively view chm files ?

I am running Windows 2000 server. I do believe asp.net IS installed as I have the .NET 1.1 framework installed.

Funny about the bounce backs. I am at about 10% of my limit, which I control as I am the network admin. I'll check into that.

I am brought to a logon page in which I cannot access the page.  This must be due to the check_user_inc.asp include.  Without the include I get a blank page.

How can i get to this to register someone in the database only after the Paypal payment has been accepted.  I was testing it out to see if it makes it to my Paypal account (which it did just fine) then I closed Paypal before paying.  I logged in as the administrator and looked at the member list and the account was created anyway.  How can I stop this from being created until "only" after the Paypal payment has been "approved"?

What if this person never comes back to "try again"? Now the username he used (and is inactive) is not available for anyone else to use.  And it takes up database space.

I am using the Paypal (non-subscription)

Thanks in advance,
scottyFlasher

I am using VS 2005, when i go to new project in visual basic folder asp.net web application is not there..

Can i add it somehow?

you basically have to edit the html in the links in the various pages and remove them... some are in includes files

use a text editor and be causious / back things up before you remove links so you can revert back

No luck...this is the message

Return To Import / Export Screen.

Active Server Pages error 'ASP 0113'

Script timed out

/members/aspprotect/password_admin/upload_post.asp

The maximum amount of time for a script to execute was exceeded. You can change this limit by specifying a new value for the property Server.ScriptTimeout or by changing the value in the IIS administration tools.

I have never heard of such a thing...
If the settings are enabled for the web it should work.
That is, as long as your include file syntax is valid.

I run my own windows 2003 server (you are on it now) so I should know

for troubleshooting

try a very very simple example... like a file in a folder.. with a server side include to a file under it

and see if that works

use real simple asp files with nothing crazy in them... and an include like this

<!--#include file = "../myfile.asp"-->