Things have now changed I found out godaddy has persitis aspUPload and aspjpeg as value added products, I have the aspjpeg working but have been unable to upload when using aspUPload, everything works fine with the vbscript method so I think my permissions are correct. Whenever you get a chance, any help would be appreciated.

Thanks

Mark

My Admin user got corupted, and I need to reset the password and user, what is the defualt password for this database, as I do not think I have changes this (hopefully) as of yet.

Regards,

Paul

I'm using version 6 upgrade and recently some of the users complained that their passwords are no longer working. I was able to replicate the problem as I also experienced the same thing with my account.

Once I reset the password thru e-mail (Forgotten your password?), I am able to login but it fails later. This is weird as I have an identical copy of the code running flawlessly  on my test server.

The only change which I made to the original downloadable code is by adding password encryption using Base 64 encryption.

Any ideas what might be the problem

Wondering what might be causing a long delay to display the login screen?  This does seem to be intermittent.  Could be server/ISP related? Have experienced enough times to justify posting this question.

I can count up to 20 seconds after clicking on the link.  After login all other selections zip right along without problem.

http://gibsoncity.us/aspbanner/

Thanks, Lance

Is there a simple way to upgrade from 7.x Lite to 7.x Full?  I was testing out the software and I just purchased it.  I have made some look and feel changes to the lite version (ie: login page), but no look and feel changes to the admin section.  Is there certian files that I can add to have the full version without shorting myself features or functionalbity? 

Thanks

ok, I just sent you a private message with download information.

replace you existing

"check_user_inc.asp"

"admin/check_admin_inc.asp"

"admin/email_user.asp"

with the new versions in the download

Do some testing to make sure that HANNAH password works ok for you.

Hopefully this cures the issue...
If it works ok for you for a while I will offer the fixes to everyone and start using this code from now on

BTW:
"admin/email_user.asp" had an unrelated bug in it that only happened if its error handling got triggered... it was posting back to the wrong page when that happened and causing an error

grrrrrr

As far as the users thing... my fault that was setup wrong in the settings of the admin login page.

but still dont have a solution for what im trying to do

I'm all set - after thinking about your replies - i checked a bit more and changed the email component type -- thanks again for all your help.

Not really.  The way I thought activity would work is that I would always see the last 50 users.  Not sure what controls that and why I wasn't seeing it, but it sounds like it is an IIS thing and since my site is not all that busy, it will not show the users if some process has reset the numbers.  Not a big deal.

As for the log files, I think it is related to my other question regarding the export directory.  I have the ISP looking into things at thier end to see if they are doing anything that could cause the directories to disappear.

Thanks,

Dave

in that file "upload_post.asp"

change

<%
If Session("Admin") <> "True"
 Response.End
End If
%>

to

<%
If Session("Admin") <> "True" Then
 Response.End
End If
%>

its part of how the skins load.. regardless you got bigger problems here..

I am beginning to wonder if you unzipped the download correctly because I see things in folders they should not be in...

you should have ended up with a bunch of folders and files...

It you just ended up with a ton of files in one directory you did not unzip the zip file correctly... if so check your zip program settings.. I mean that error is because it is looking for a file in the skins folder that isn't there and it should be there

better yet, unzip the downloaded zip file using windows xp built in unzipping features which will do it correctly...

sorry.. you just said above you were using XP SP2 so that is the article I referred you to as I just assumed you were talking about your local web server

here is my article on permissions regarding server 2003
http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

I can look at your installation monday if you like. In about an hour I leave for a wedding thingie and I wont be around again untill monday around noon

Try the uploading using VBSCRIPT method just for the heck of it. Perhaps there is an issue with the installation of the dundas component.

CJW

Just got back 10 minutes ago..
Missed plane yesterday because of traffic and the flight today was 3 hours plus 4 hours of driving

The fact that you are using Server 2003 is not relevant. I am very familiar with it and all my sites run on it.

The ASPNET account will be there by default once the .NET framework is installed. It won’t just show up in the list, you have to search for it like my article mentions.

http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

no, you cannot unless you plan to write a lot of custom code.

That is why the option pack has groups which eliminate the need to use access levels because groups can do everything access levels can and more.

There is an article here regarding that.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=32& PN=1

(Indemnification Agreement Mod)

This very simple mod will add an Indemnification Agreement Pop-up to the registration signup form which must be agreed to before continuing. This is often done for legal reasons to help cover yourself if something should come up later on.



Instructions:

Download 2006-03-19_212700_Indemnification_Agreement_Mod.zip which contains "terms.js" and put it in your scripts folder. It contains the text that will be displayed in the pop-up. You can of course carefully edit it with a text editor to say whatever you like.

Now carefully edit "users/register.asp" with a text editor. Add this bit of code in blue right after the include to the "footer_inc.asp" file like so. It will be near the bottom of the page.


<!--#INCLUDE FILE="footer_inc.asp"-->

<% If ErrorMessage = "" Then %>
<script language="JavaScript" src="../scripts/terms.js">
</script>
<% End If %>

Your done, that's it. Now when "users/register.asp" is run for the 1st time the pop-up will come up.

right..

I had to open up the permissions to get it to work.  I now have to go back and uncheck each one for directory listing.. :)

We can't seem to find the purchase emails for this install of ASPProtect.

It would have been in May 2004 for NetOptions LLC or CareerMatrix.com

We noticed it should have been v6 of ASPProtect.

Can you resend the download links?

Now that I think about you may very well be able to use the existing login_form_inc.asp page

the header and footer files for the users area may be ok as well.

probably the smart thing to do is try your old ones and compare them to the new and see if everything you need is there. If not add it by looking at the source html and comparing.

All other files should definetly be replaced with the new.

This server is sitting in my den on a DSL circuit, so I don't have a hosting company. The install for Windows 2000 server is with default settings for all components installed.

I am not sure what you are referring to when you say:

"Does emailing work under the simplest scenario ? (directly from the users screen"

What user screen?

What settings are you referring to that I may have chosen?

I'd say that the vendor is right so I've submitted a work order to
create the *****.com/aspnetprotect directory as an application.
If there are any other directories for which this needs to be done,
please let us know. This particular task always needs to be performed
by our staff.


If you need to follow up on this job with one of our on-line or phone
technicians, you can reference ticket id 11860.

With regards

Sounds great, Sold!

Thanks Christopher!

Dear Christofer

I already have send you the details you asked me for. Please let me know if you have received

As an update to this thread I fixed the "upload_post.asp" page quite some time ago but forgot to post the updated file here.

So here it is.

2005-09-16_165913_upload_post.zip

Hello,

VBScript is the most popular ASP scripting language, and has the most support available. I estimate that less than 5% of the ASP coders out there use anything other than vbscript

That being said it specifically says on the aspprotect site ASPProtect is only for use in protecting asp using "vbscript" as the language.

http://www.aspprotect.com/more_info_full_v7.asp

http://www.aspprotect.com/comparison.asp

it is something I specified very clearly for this very reason.

Sorry, but you can not use ASPProtect to protect pages using Language="Javascript". The code is too complex to be mixed with server side Javascript.

To password protect asp pages written using "Javascript" you really need a an application specifically written in and designed to work with ASP pages written using "Javascript". And then of course that application would not be able to protect ".asp" pages written using "vbscript." (I mean never say never, but it would be a ton of work to get both working and I doubt you will ever see a commercial application that does both)

as for switching back and forth between vbscript and javascript you really can't except with very simple code. Doing so with anything complex can be extremely problematic because the order of execution sometimes gets all mixed up because of the complexity of the code being used.

That doesn't mean it can not work....

You would really want to do something like this.


do not specify a default language at the top

surround the aspprotect include file with this

<SCRIPT Language="vbscript">

</script>

surround your javascript code with this

<SCRIPT Language="JavaScript">

</script>

then make sure none the code including the aspprotect include file has any <% or %> tags in it

that means you have to remove that sort of thing everywhere... that means a lot of work if you used a lot of that sort of thing instead of response.writes to write out html type stuff

and again... I don't know if you would ever get it all working

so, on control_pics.asp where you see

<% =TempDesc %>

you could try doing this instead

<% =Replace(TempDesc,"&nbsp","") %>

need more info..

are you using aspimage to resize images and make true thumbnails..
(because if you have it turned on and it isnt actually installed on the server you will get broken thumbnails.)

what kind of images are you using ? gif or jpegs

are you uploading images over existing images ?

really need to know exactly what to do to reproduce the situation from scratch and then I can give you a better answer ??

Chris,

Yesterday when I would access the get_me_in page with the password key, I was then taken to the default login page.  It did not give me the option to create a user. 

Today, when I entered the password key into the get_me_in page, I was taken right to the create user page.  So, yes the problem has been resolved.  I have no idea why though.

Some of our users complained that their users id and passwords are sent in the clear. So we decided to invest in an SSL certificate from Verisign. It has been tested fine with all forms and pages in ASPProtect version 6. The only remaining page which I am not sure how to protect is the home page. Let's say my home page is http://www.MyDomain.com/index.asp. When the user goes to this link he/she will be presented with the check_user_inc.asp page so he/she can enter their ID and PW. So how to make the login information send from this page thru HTTPS?

Thanks.

clark

There was nothing wrong with the server configuration. It turned out that the problem was that I disabled the email notification of new user registrations that I continually receive. That appears to disable the authorization email to new users as well.

One other issue. It appears that AOL email addressee's are not getting the authorization email. Does AOL have any blocks to CDONT generated emails?