Hi - When I try the mass email feature, I get an error that says:

ODBC Microsoft access driver) too few parameters expected 1

/aspprotect/password/admin/send_mass_email.asp line 280

Oddly...this feature works fine when I use the original admin user that you setup. 

But I setup another one with my username and password (not test) - because I was afraid anything with "test" could get deleted. 

Any ideas on why the new admin userid would not work?  Note: I have not change any code from the original installation.

ASPProtect Version 7
Expiry Notices go out to members who have recently renewed by subscription.

When an existing member from ASPProtect Version 6, with an expiry date, renews with SUBSCRIPTION in v7, the previous expiry date remains unchanged.
We assume the expiry date remains blank with NEW Subscriptions and that Paypal takes care of notifications.

 But our notifications to the "about to expire" dating from v6 catches the "Renewed by subscrtiption" as well, as the date has nor been changed or removed, and this REALLY confuses our members.

Can this be resolved?

humm

expiration dates in the aspprotect system are not used at all when using paypal subscriptions.. all date handling is done on their end actually

and they of course send notices from their system to the user regarding their subscription and when it renews,cancels, etc etc

so I am pretty sure any errors with that would have more to do with the info you used for the subscription setup and possibly any paypal settings associated with it

its hard to say at this point

The smart thing to do I think.. would be to sign up someone using another PayPal account (your allowed 2)... and while doing it be very careful about the subscription setup data.. and then as soon as the subscription is created review all the info in the paypal system and see if the length of the subscription / expiration.. etc etc in the paypal system info looks right..

at least then you can begin to troubleshoot what is going on...

No can do.  In both cases there is an icon that says "Not uploaded".  I click in it and nothing happens.  There is no link to upload.  Am I missing something?

By the way, I appreciate and am impressed with your rapid response. Thanks.

it has been 3 days since I logged myself in under Admin, and all the user information on the User Activiy screen seemed to be gone.

is there any specific length of period it refreshes its user information??

I purchased two site licenses for ASP Protect a while back and am now trying to implement the application.

The connection to the database is fine, because it recognizes the user and displays the user name.  However, there must be a problem with the permission because I get the DNS error information from the On Error in the check_user_inc.asp file.

I set the permissions on my PC as you indicated, both on the folder and the database file.  But get the error and cannot access the database to view or modify.  I also uploaded the file to my web server and set the permissions as well, but get the same problem.

You mention on your forum that it is not the code, but I don't understand if the code is correct and if it finds the database and the permissions have been set as you indicate, why doesn't the code work?

again I will ask you what is the real error??

see the link above when I asked you the 1st time.
(I need the error details and line number.. etc etc)

and what kind of a server are you trying to run it on ?
you mention xp pro but in a confusing way ?

I don't believe that the iframe method is supported in a .NET (aspx) implementation, is it?

JDooley

ok, here is what is going on

you are password protecting an ".asp" page that requires querystring info to run correctly   (example - "somepage.asp?ID=3"")

that is something I never intended anyone to do.. while it does handle and repass the querystring info along during successful login it does not re-pass that info during a failed login as you have found out

this is all by design.. the only reason the system re-passes the querystring info at all is because I wanted to make it smart for the sake of the remember me/cookie feature.. so if someone was using that and bookmarked a page deep in your site with querstring info...then when they went back to that bookmark they would get authenticated and still see the page as intended with the querystring info in tact

it was a nice feature never intended to handle any situations other than what I just described...

now...
notice the url in the browser after failing a login.. then logging in successfully.. it is missing the querystring info

that more than anything is what is going on..  browser caching can cause some confusion when dealing with this because the browser likes to return you to the page minus the querstring info... when that happens a simple browser refresh at that time may very well solve the problem and then you see the page you are supposed to see...

To avoid all of this...

One solution to this is to always start people logging in to an ".asp" page that has no querystring info. That way this won't happen. Once they are logged in you can then offer them links to the pages they need to go to. (you of course still want to password protect those pages)

Another solution is to log them into a page with no querystring info and then do a response.redirect to the page with quersytring info.. thus accomplishing the same thing but without the possibility of the issue because of a failed login.

Another solutions is to do checks in your asp page for missing querstring info.. and if it isn't there do something about it like send them somewhere else.. or display a message about there being an error... etc etc

So,basically you don't want to tell people to login into such and such page with querstring info... and providing a username and password..... You can do it but like you found out it can cause an error if they mess up logging in the 1st time. The system just was not designed to handle that. There are complex reasons for that involving security that would just take me too long to explain.

I hope this makes some sense to you.. it is very hard to try and explain

UPDATE... on very very busy sites these methods have been reported to fail once in a while..  meaning .NET gets overloaded and instead of a banner its shows some error code.

its not the banner system .. its the .net engine and the calling method

Well, thats not normal.
(it should work just like our online demo does)

Do you have everything turned on in the settings ?

Uploading needs to be enabled and you also have to pick a valid upload method.

The company that hosts our business web site has been impossible to deal with in assisting me in getting asp protect to work. Getting the rights set correctly took 6 days and then getting parent paths enabled has been impossible. There last response was simply this:

The includes were changed so that if your server does not support "parent paths"
' and the "../" that you could easily change a few files like this and make the
' includes virtual includes instead of file includes. We didnt make them virtual
' includes by default because depending on where in your site you put the application
' the virtual include path would be different. They are also much different on a local
' development server than they would be on your real server
'
' Here are some examples of what you might change these includes to
'
' If you put the aspprotect folder in the root of your domain at your server
' example: www.mydomain.com/aspprotect
' then you would probably use
'
' #INCLUDE VIRTUAL="/aspprotect/dataconn_inc.asp"
' #INCLUDE VIRTUAL="/aspprotect/config_inc.asp"
' #INCLUDE VIRTUAL="/aspprotect/scripts/emailing_subs_inc.asp"
'
' Or if you didnt use the aspprotect folder and just put the contents of it in the root
' of your domain
' then you would probably use
'
' #INCLUDE VIRTUAL="/dataconn_inc.asp"
' #INCLUDE VIRTUAL="/config_inc.asp"
' #INCLUDE VIRTUAL="/scripts/emailing_subs_inc.asp"
'
' It really all depends on what works for your situation
' If you want more information on server side includes read this article at PowerASP
'
' http://www.powerasp.com/content/code-snippets/includes.asp

I am assuming that they will not enable parent paths and I need to modify some code. I do not know asp. WHere do I modify the code for a server that will not enable parent paths?

Thanks,

D

Sorry, not really.. not without a lot of changes to the code.
the recent activity info recycles.. it is not meant to be day by day

My suggestion there would be to look at both the log files and the user activty screens...

Hello,

I need to see if this is possible. I want to create a browsing system such that, the user selects a Province from a drop down list on the main page. Based the selection, the username of all the users in that province will be shown. Then the user can click on a specific username and his/her portfolio (photo album) will be displayed.

is this possible? If so, How can I do this, please help.

Thanks

Sean

yes, admins have access to absolutely anything...

as for the other question what you should do is only show links to people logged in that they have access to.. then they wont get logged out when they go to a page they do not have access to

for example if someone doesn't have access to a level 4 page dont give them a link to go there... you can do that by checking the session variables and creating your hyperlink html code accordingly .. using simple if-else logic... you could even make a hyperlink non-clickable and add some text to it like (no access)

it's all about taking the time to intelligently designing the different areas of your web site. It takes a bit of time and work to really make a system flow the way you want it to.

other than that it becomes extremely complicated to not grant them access when they go to a page they dont have access to but also keep them logged in. It is just not designed to flow that way. If someone goes to a page they do have access to they get logged out. It sort of has to be that way because of the ways things flow.

more info on accessing user info after login so you can do that
http://support.cjwsoft.com/code/moreinfo198-1.htm

another good thing to check out is the provided examples for mutliple access levels. You can see that if you log into the default page for that that it only shows you links to pages you have access to. Done with simple if-else logic around the html links. It is using groups but you can do the same sort of concept using groups.

yeah.. thats an old graphic probably only seen in a few places.

it is not on the main site
http://www.cjwsoft.com/
or here
http://www.aspprotect.com/
or here
http://www.aspbanner.com/
or here
http://www.aspclassifieds.com/
or here
http://www.aspphotogallery.com/

but I am sure there are a couple of pages left over still using it like the aspvendor and asplistings pages.. etc    I am aware of it, just been too busy to go change them and I didn't consider it a big deal

2003 servers are NT based anyway

This is a great article from my old powerasp.com site.
Connections And Server Database Permissions

Really awesome, thanks..

If possible please be sure to respond to the email they send so the review ends up authenticated

Our webhost changed converted all sites from c: to d:, and without us doing anything else, our customers now get the following error message when trying to access our Classifieds site:

***********

Microsoft][ODBC Microsoft Access Driver] Not a valid password.

This means there is most likely a problem with the "ConnectionString" info that you specified.

If you are using a DSN-Less Connection with MSACCESS.

Check that the physical path to the database has been specified correctly.
It has to be perfect and correct. It cannot be specified using "http://" or by using "server.mappath".
It has to be specified like the following example.

ConnectionString = "DBQ=D:\Inetpub\wwwroot\advpass_pro\_database\passwords.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=admin;PASSWORD=Xpass"

If this is running on an NT server or Win2000 Server make sure that permissions have been set on the database.
Only the server admins can do this. If you are not the admin you will have to ask for this to be done.

If you are using a System DSN

It is not set up correctly. Again, make sure the permissions have been set for the database and that the system DSN has been set up correctly by the server admins.

************************************************************ *********************

We did everything the web host asked us to do, that is, changed all references to the C drive to new references to the D drive, but the error is still there.  We also never changed any passwords (as far as we can remember).  Can someone please tell us where to look (also which file might tell us what the correct password is in case it has in fact been changed.

Thanks for the info.  We'll do as you suggest.

NPA

Sorry, should have added,  if i change the connection string, i can also get this...

[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

Just an update,,,

the permission were all correct.... i left it and tried from my pc at work and it works fine... so i dont know what hahhpened.... thansk for your quick response

regards

Domenic

Sydney, Australia

Is there any way to make the ads in ASPClassifieds end on a day of the week. I would like all of my ads to end on Sunday night and was wondering if there was a way to automatically do that in the database??

Thanks

Dave

Ok time for some more questions!!!

Is there a way to make the person's email address their default username... or force it in somehow instead of allowing them to create their own?

I am attempting to have the page dedirect from the group, as some of my users are part of different and multiple groups (they are not structured in access levels, b/c they cannot be part of multiple levels(?)).  So I think I need to redirect by group.  I am having trouble having this work correctly.

-j

Is there a limit to how many access levels the program has?  We were thinking of having a different access level for each client that logs on our site so we can customize their web experience.  We see 6 in one place of the program, 8 in another, but is there any reason why we couldn't make 100 more?

Thanks again for the help!

Thought this would be easy.  A few more pointers should get the database connection to work:

1) How do you decide whether it is a DSN (system datasource) or not? Does just putting the file in the ODBC make it so? 

2)We have other files in there for other server applications, does that mean we’re stuck using DSN’s or is the file independent of that control dialog?

3) Assuming we get rid of using DSN for this database (or not), does the code go referenced in your article http://www.powerasp.com/content/hintstips/permissions.asp apply here or should it just work?

What else are we missing?

Trying to make sense of this.  I am still confused.  In the file config_inc.asp.  I found the setting for "uploaddirectory".  That entry looks like this [UploadDirectory = CmdGetConfiguration("UploadDirectory")].  I assume there is a config file where the value of upload directory is located. 

The settings in the config_inc.asp file have not been changed.  they are set to the way it was delivered.  Is there a document that gives instructions as to what and where the config settings are to be changes?

I really do not know to tell you the truth. I'll do some research.

The script only allows .jpg, .jpeg, and .gif extensions.

If someone uploads a file called... "filename.vbs.jpeg" with bad vbscript in it I seriously doubt anything can happen because of it because of the extension.

But I really do not know.

It has never happened to any sites I have or know of.

This is what "John Evans" of CJWSoft has to say on the matter...

"I think that’s pretty much impossible. If the server sees a .JPG or .JPEG extension why in the world would it go and try to read it or do anything with it.

I believe there may have been some issues with Outlook and Outlook express that made it look like a vbs script sent as an attachment was actually a JPG because someone found an exploit in those programs and it would appear as if double extension files were one thing when in fact they were not.

Having a real time virus scanner on the server (which any good host will) should also catch anything infected being built on the server drives as the file uploads. Always worked for me and I had a lot of people uploading ZIP files on winxptheme.com at one point. Many had viruses in them although I suspect it was totally innocent on the end users part. Some people didn’t even know they had a virus on their rig. 

Fact is anything is possible but I think chances of getting a virus or being hacked in some way from this sort of upload are really slim."

http://support.cjwsoft.com/code/code_info.asp?TID=319&KW =paypal

>>I should also mention that the paypals scenarios used in ASPProtect can not be tested using PayPal's sandbox.

>>Also test using two real PayPal accounts and on a live setup. (You'll allowed two paypal accounts) then you can log into the other and refund the transctions and of course it makes sense to use low amount like 1 cent and what not.

Yeah, been messing around with that.  Got everything going except the return page which I can't do until the site is live. 

>>Also, I'd love to see what you came up with with the integration. I have been working on it here as well and took it in a different direction as I plan to sell directions for it as an add-on for aspprotect.

Ok.  Will email you with a username and password for access to the site once it's live. 

Sounds like a great add-on for ASPProtect!

All fixed and working

Thanks