Hi, I haven't heard anything from you.

Has this issue been resolved ?

Thanks

Ya, you must have tried to upgrade from a really really old version like you said which wouldnt really work out because those instructions are specifically for upgrading a version 6 database to version 7.

That line error you had was looking for the User_ID field and I bet the version you had was so old that you didnt have a field named that as a few years ago the field "ID" got renamed to "User_ID"

As for all the cool stuff... yup there is a lot of cool stuff in this version... glad ya like it so far

Login failed for user 'aspgallery'.

Okay, shouldn't this be trying to use aspgalleryuser?

Lance

Banners no longer show up on my site ?

If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.

The web server must have crashed or lost power and now the application variables are in limbo/not working.

I have seen this happen a few times.

Basically the application variable system gets messed up because it was not shut down properly.

The way to cure it is as follows.

Edit and save a banner in the system. Hopefully that gets things going again.

If this happens a lot it is a server issue, not ASPBanner's fault.

Help!.. I need to export the username and password fields to a mail merged letter so everyone knows their username and passwords. However whenever i access the database or do an export. The passwords showup as encrypted. Is there a way to access the list, un encrypted?

thanks

I encountered a problem that I haven't been able to solve. I'm trying to get .pdf files to byte serve (page-by-page load in the browser) but unable to do so. I've narrowed it down to stream download file where it creates the header object. I haven't made any success with the changes I've tried. Any help would be very nice.

This maybe useful:
http://msdn.microsoft.com/library/default.asp?url=/library/e n-us/act/htm/actml_ref_href.asp

Christopher

Many Thanks

Seems like its working just got to test it bit to see, though it wasnt going to work as I had one too many End If's after the last part of the code you done for me. But even I eventually sussed it, nothing to do with your bit just another mistake on my part

Great to get support like this especially on a Saturday

regards

John

thx, thats a known error I forgot about.

I just updated the zip archive so the error is gone but if you bought ASPBanner Unlimited Version 7.3 Before April/06/2004 you can optionally apply the fix.


To fix it (only if you want to use the option explicit method of calling banners and not even a really necessary fix as this is just an error in the generated code your supposed to use)

Just edit aspbanner/zones.asp with a text editor.

Where you see the double dim carefully remove one of the "dim" s and save the file.

Hi,

I am just wondering if anyone else has had this problem. Even though the guestbook is empty, it takes just about 20 to 30 seconds for the guestbook/default.asp lto oad. Is this normal has anyone else has had this problem.

Thanks

If you are developing using Windows XP Pro and running the NTFS file system setting proper permissions on a folder in your website requires that you 1st disable simple file sharing.

To do so open up "my computer". At the top open up "tools/folder options"

Then the "view" tab.

Then at the bottom uncheck "use simple file sharing"

After that that is done... using "my computer" browse to the folder in your web that you need to set permissions on.

Right click on that folder and then choose the "security" tab.
(If simple file sharing is on that tab wont be there)

Give the "Internet Guest Account" Modify Permissions
This will check all the boxes under modify as well.

You can also give permissions to the everyone account and accomplish the same thing.



BTW:
If you are using ASP.NET you need to give permissions to an account called ASPNET. It wont show up in the user list. You'll need to click "add" and then type in "ASPNET"

To hopefully wrap this thread up...

This user showed me his site and things were working for me as they should.

We came to the conlusion that the weird behavior he was experiencing was because he was using AutoComplete in Internet Explorer....

It was automatically filling in the fields with his username/password that he had autocomplete save.

So it was a web browser usage issue.. not the code.

i've got a client who has handed me a 151 character banner URL, and i see that the database is designed to take 150 characters. i took the obvious step of just increasing the size of that text field in the database, but i still get this error when i try to enter the URL in the proper form field:

Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.

/banners/aspbanner/save_banner.asp, line 200

now, line 200 is just this:

If Banner_Link_URL = "" THEN
 CmdEditBanner.Fields("Banner_Link_URL") = NULL
Else
 CmdEditBanner.Fields("Banner_Link_URL") = Banner_Link_URL
End If

which tells me that something is blocking the assignment of that long value to that field, even though i believed i had extended the length of that field in the source database.

where else might i look?

Hi,

I don't see any good reason to rename any of those files.

Changing them though may involve changes to the code recompiling, etc etc... it is not something I support.

Thank you....  yes it does

Is there a limit in the number of Zones you can have in the database.

thanking you

Have SQL 2000 backend...
We just moved from Windows 2000 to Windows 2003, used import data routine in SQL to move data.

Logged into admin area. When adding new user, no record is created. However, editing record works just fine.

Any ideas would be appreciated.

New Power Supply and a new (CPU Fan/Heat Sink) seemed to do the the trick. She's running like a champ now...

Hopefully it keeps doing so. Only time will tell.

It she's stable I can get back to designing some new software.

I cleaned up the code as you suggested, and I still can't get the images to display without the whitespace around it.

How do I download the ASP version?  I'll give it a try.

Thanks for your help,
JDooley

The ASP error on the home page has been solved -There was aproblem with the path that was including the home page file and we fixed it.

However the error on the member page remains - any ideas/suggestions would be appreciated. This is the error:

Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for

process 0x748 Thread 0xad8 DBC 0x214734c Jet'.

/aspboard/forum/global.asp, line 15

That is by design, removing and deleting are two different things as far as the classifieds system goes.

A regular user can only remove an ad from the category index. (which makes the ad inactive)

An admin however can truly delete an ad from the system.

I would also double check that you changed the field size correctly and on the correct database that is being used in the connection string

humm, yea thats a data connection error..
really not related to the asp code in the application for the most part.

that is low level

If using MSACCESS

I would make sure permissions are set correctly on the database folder (not just the database file itself)

I would make sure your using at least a 2000 version of the database. 2003-2003 format being better.. 

I would make sure the server has up to date mdac/odbc drivers.. (that is really the server admins responsibility)


As for permissions there are articles in our forums about exactly how they need to be set. Improper permissions can cause a ton of random errors like that.

http://gibsoncity.info/guestbook/default.asp

Reports 65-messages, however after the first 10 are displayed and you click on the More Messages button, I get the Page cannot be found error.

IMPORTANT UPDATE - READ THIS
http://support.cjwsoft.com/forum/forum_posts.asp?TID=205& ;PN=1


The IPN Subscription Pack which is built in to ASPProtect 7 contains all the pre-built scripts you need to implement PayPal IPN Subscriptions with ASPProtect. IPN stands for (Instant Payment Notification). It allows you to set up scripts on your server so whenever a PayPal payment is processed the PayPal server sends info to your server regarding the transaction and vice versa. This is a fully automated process and allows you to charge users for access by the month or however long you like.

The Subscription feature of PayPal handles recurring billing automatically. The PayPal server will communicate with the ASPProtect system and keep everything up to date with users and their subscriptions.

This Support Pack basically gives you an additional signup and registration directory "paypal_sub_signup" and it should not interfere with any changes or customizations you have made to your ASPProtect setup. New users can register in this directory and sign up for a subscription at the same time. Existing users whether active or expired can be sent to this directory where they can lookup their account and start a subscription. You can also assign various Access and Group Levels during signup and you can set up various prices for various amounts of time as well. This is a real-time setup for the most part. As soon as a user pays via PayPal your system is updated and they will have access.

To use this all you need to do in ASPProtect 7 is enter your PayPal account name into the settings screen. It will be an email address. You'll need a business or premier account with PayPal and you will need log into your PayPal account and turn on IPN in you profile. They make you enter a default IPN URL. We do not use that so if you already have something there leave it there. If you dont have something there you can type in any the full url to any page on your server. It's probably best to send it to an empty ".asp" page or something.

Changing Payment Options

In the "paypal1.asp" file there are some sample payment options set up.

They look like this and you can have as many as you like.

<!-- Begin Payment Option Code -->
<form action="https://www.paypal.com/cgi-bin/webscr" method="post" target="_blank">

<% Label = "Membership (1 Month) $9.99 Recurring" %>
<!-- Begin Form Fields You Can Edit.. See PayPal Subscription Manual For Details -->
<input type="hidden" name="no_shipping" value="1">
<input type="hidden" name="no_note" value="1">
<input type="hidden" name="a3" value="9.99">
<input type="hidden" name="p3" value="1">
<input type="hidden" name="t3" value="M">
<input type="hidden" name="src" value="1">
<input type="hidden" name="sra" value="1">
<!-- Field Below must have 2 commas First two values are optional (access level,groups,user ID)-->
<input type="hidden" name="custom" value=",,<% =User_ID %>">
<!-- End Form Fields You Can Edit.. See PayPal Subscription Manual For Details -->

<!--#INCLUDE FILE="form_data_inc.asp"-->
<input type="image" src="https://www.paypal.com/images/x-click-but20.gif" border="0" name="submit" alt="Make payments with PayPal - it's fast, free and secure!">

</form>
<hr>
<!-- End Payment Option Code -->
 

To really understand what these form values mean it is best to look through the PayPal Subscriptions Manual which is a PDF file you can get from the PayPal Site.

This link was valid the last I checked...
Subscriptions and Recurring Payments Manual

It also may be helpful to use their wizard to create some subscription buttons with different settings and then look at the code generated.

Bascially these are the important ones..

a3 - amount to billed each recurrence t3 - time period (D=days, W=weeks, M=months, Y=years) p3 - number of time periods between each recurrence

The custom field is something we are using to send info from ASPProtect to PayPal.
it allows you to set the access_level or groups access (groups support require the ASPProtect Option Pack)

<input type="hidden" name="custom" value=",,<% =User_ID %>">

or this example where we are setting the access_level to (2) and also giving the user access to groups (3 and 4)

<input type="hidden" name="custom" value="2,*3*4*,<% =User_ID %>">

Here is how it works.
The value setting (red) is essentially and array that can be made up 3 elements separated by comma's

access_level,groups,User_ID

If you do not want to set the access_level or groups access.. then you don't even need to edit the setting.

Values must be separated by a comma even if there is no value and there can be no spaces.  If you didn't want to set an access level or groups there would still be 2 commas at the beginning.  etc etc
Basically there must always be 2 commas but you only have to set last values which is the User_ID from the ASPProtect system.

The 1st value is the access level you want to user assigned to.
The 2nd option is the groups you want the user assigned to. (requires option pack)
The 3rd option is the User_ID which the system takes care of. Do not edit this option. Leave it as <% =User_ID %>
 

Hi all,

I have the photo gallery set up at www.kashabowieoutposts.com/gallery

It's great - love to work with it.

But I've never been able to get those with just User permissions to be able to upload... Only an administrator is successful in uploading.  This was no problem in the past, but now this client would like to give their guests a means to share their pictures on their site - so now I have to figure out the bug...

... this is the error I keep getting...

Your upload did not succeed, most likely because your browser does not support Upload via this mechanism.

Your browser must support a standard called RFC 1867. Please check with your browser vendor for support of this standard.

------- anyone else experienced this?

Many thanks all!!

Doug

import/export feature WARNING !!

I just want to warn everyone that the built in import/export feature can be a little dangerous.
The reason being is when you import users they get new "Users_ID"s in the database.

The "User_ID" field is an autonumber field and that is why and there is nothing you can do about it.

So, if you are using a user's current "User_ID" to keep track up something important NEVER export the users and re-import them. Because their "User_ID" will change and you will be in trouble.

The PayPal signup features of ASPProtect actually use the "User_ID" like this and that is the main reason this warning is here.

now, that being said

If you are importing new users into ASPProtect

or

simply exporting existing users to another system

then this is nothing to worry about.


Basically, the moral of this story is dont think of the built in Import/Export feature as backup system because it is not. It is not a substistute for backing up your database.

It is a just a tool that can come in handy for various things.

ok, here's a test page:
http://www.galvinelectricity.org/download_link.asp

user: test
password: test

Our company just got new computers, so everyone here has the same set-up, all Dells, all about 3 weeks old, all Windows XP.

But I did realize after reading your post that I am using Firefox and everyone else was using IE. When I used IE, I was able to duplicate the error.

But, alas, I am unable to resolve it. Client will be using IE, no doubt.

The problem was that I did not have

ConnectionString = "Driver={Microsoft Access Driver (*.mdb)}.... in the connection string.

Thank You.

it might also be a good idea for you to try a simple text file writing example like this on your server and see if it hangs as well

http://www.devasp.com/samples/writetofile.asp

for troubleshooting sake

this is sounding more and more like the filesystem object is blocked or disabled on your server

Sounds cool.. post info when you get it sorted out

thx

hopefully someday I'll get the new version finished.. I just never seem to have time. Lately ASPProtect takes up all my time and now aspclassifieds seems to be in need of a new version more so than asp photo gallery

Its still not there as labeled 'internet guest'.  There's a 'guest' and a host of others.  Is there a way to identify it as the proper guest account to use with ASPProtect?

Also, looking through support documentation, I see other possibilities it could be (http://www.powerasp.com/content/hintstips/permissions.asp).  Is there a way of telling which the problem is and whether we use a dsn connection or not?

The error we are getting is

 Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x1340 Thread 0x17a4 DBC 0x162becc Jet'.

/aspprotect/scripts/populate_config_variables_inc.asp, line 11

umm.. rename the pages to ".asp"

After all these are ASP scripts we are dealing with and the product is called ASPProtect.

The web site says it is used to protect ".asp" pages

And the directions tell you to put the protection code on ".asp" pages.

ASP can not run in ".html" pages

If you do not know basic things like this you should really learn the basics of ASP before you try to use the application. I would suggest a good book or two. ASPProtect is for people that have at least some experience with Active Server Pages.