MSACCESS 2000

server: windows

option pack: yes (after the install I have this problems with groups and edit users )

host permissions: yes

MESSAGGE:
Active Server Pages error 'ASP0113' Script time out/password_admin/groups.asp The maximum amount of the time for a script to execute was exceeded. ...

First pass through, I don't see anything changed in the groups section of the check_user asp file. the logoff asp wasn't touched.

I noticed the demo online (on this site) only has pages protected with access levels; you say it works fine with groups also?

I just moved servers and now my "code" ads are giving me errors...

"google_ad_width" is undefined.

I have tried adding the width and height... taking it out.. all the basic stuff.

Any ideas?

TIA  

Sorry, I forgot about that when I got hung up on the install problem.

 I'll tackle your explanation now to see if I can get it working. Since I already bought the software I'll keep my fingers crossed.

Thanks

ahh, I see..

that is not really something you should change.. it is pretty much always going to say read for any folder

It's hard to say, but adjusting settings like that could inadvertently change folder permissions in a way that could cause problems and be hard to correct. I really don't know that for sure but it is very easy to totally mess up permissions when trying different things. In the past I had to reinstall iis just to get things back to normal. I eventually over time learned what to do and what not to do and have never had a problem since. I am not saying you are one of those people but a lot of people have problems because they play around with things they shouldn't or they go nuts trying to give every account permission starting from root folders... overwriting important default permissions instead of just making changes to a few specific folders.. not understanding the importance of what they are doing..... etc etc

Sometimes you practically have to be a NT expert just to fully understand permissions. I know a lot and I can handle my own server but it's hard to explain the low level basic of NT permissions to others as there is a lot to it under the scenes. A lot of hard core NT/2000 users do all the permissions from the command prompt because there is a lot more control at that level.

Like I said earlier, what you showed me looks right but this isn't a complex issue and the error means what it means. Something isn't right with the permissions.

I would start from scratch if I were you. Perhaps consider doing an install in a new web instead of in your root like you showed me. Or try installing it on another machine for troubeshooting sake.

I am sorry I can't think of some amazing answer on this one, but I think this is just one of those weird situations that requires starting from scratch or trying it on another machine.

Humm.. that should have worked fine

why are you getting a "OLE DB" error I wonder ?

I need more information. 

Database being used and version ?
Server OS Version?
Connection String being used ?

etc etc

  Hi, we purched ASP Protect a few months back and had it installed on our hosting company under a "temporary" domain name -- cidrasensors.com

We are now about ready to switch this development site over to production and I need to change the domain from cidrasensors.com to cidra.com

My hosting company wants us to create a new accounting and re-set everyting up.

So...based on this, I have a few questions for you:

1. Do I need to re-install the software? or can I copy from one account to the other?

2. Assuming I can copy the software to the new account - are there changes that will need to be made to point to the new domain?

3. If I decide I wanted to keep the first account alive for development purposes (never turn on the website domain to the public) - would I need to have a seperate ASP Protect license? 

4. If I decided to ask you to do the transfer for us - is that covered in the $20 Installation fee I saw on the web?  

Hello

I have a strange problem with the thumbnails in the ASPClassifieds.
If i upload some pictures in an ad, the 2nd picture always shows with an x, as the picture doesn´t exists. But if i click on the 2nd thumbnail, the picture shows okay. I haven´t changed enything from the original code.
Does anyone have any idea, where it goes wrong ?

With best regards, Erling Larsen

ok...

you got problems if you cant import a file created by the system..

You using SQL or MSACCESS and do any of the users data have apostraphes in it ?

ok.. so we got an NT server with a 486 with 256 meg of ram. 

hehe  sorry

anyway.. I have the system running without doing any importing and WOW is it chugging.. I mean it takes a while even to edit/save a user

good news is the filesystem object works as I wrote to a text file

this may end up being a simple case of lack of horsepower..

we may need to do the importing on a faster system and then take the database over cause everthing I see on your server looks correct

even so aspprotect is running so slow.. I have never seen it chug like this

I even tried connecting to a 2000 version of the database and no difference.

I am not totally sure what is going on but the server resources available are scaring me... however this could be something new in the code that I never got a chance to try on NT server.. I dont think so though

how does your other stuff run ?

static pages that do not access a database seem to serve up quickly.

are you running any other dynamic code ?

Humm, I can see all those pages loading just fine at both domains so you got me pretty confused at this point as you just said they didnt load.

regardless, the data connection tests are failing with both of them.

so let me ask you again how are you setting permissions on the database folders?

Which page should a user see next after completing a Paypal transaction?  Where do I set that?

Nick

Additional Information.

A set of these variables get created for every user that logs in to your site.
For performance and memory conservation reasons some of them can be turned off and are optional.

If you look in the "check_user_inc.asp" file or the "check_admin_inc.asp" file you will see a section of code like this


   ' Start of optional session variables to be set
   ' Recommended that you remark out any of the session variables below that you don't really need to use
   ' This will save a lot of server resource because every user logged in has a set of these
   
   ' I added some code here to not create these if they are empty
   If CmdCheckUser("First_Name") <> "" Then Session("First_Name") = CmdCheckUser("First_Name")
   If CmdCheckUser("Last_Name") <> "" Then Session("Last_Name") = CmdCheckUser("Last_Name")
   If CmdCheckUser("Company_Name") <> "" Then Session("Company_Name") = CmdCheckUser("Company_Name")
   If CmdCheckUser("Email") <> "" Then Session("Email") = CmdCheckUser("Email")
   If CmdCheckUser("Address") <> "" Then Session("Address") = CmdCheckUser("Address")
   If CmdCheckUser("City") <> "" Then Session("City") = CmdCheckUser("City")
   If CmdCheckUser("State_Province") <> "" Then Session("State_Province") = CmdCheckUser("State_Province")
   If CmdCheckUser("Zipcode_Postal_Code") <> "" Then Session("Zipcode_Postal_Code") = CmdCheckUser("Zipcode_Postal_Code")
   If CmdCheckUser("Phone") <> "" Then Session("Phone") = CmdCheckUser("Phone")
   If CmdCheckUser("Custom1") <> "" Then Session("Custom1") = CmdCheckUser("Custom1")
   If CmdCheckUser("Custom2") <> "" Then Session("Custom2") = CmdCheckUser("Custom2")
   If CmdCheckUser("Custom3") <> "" Then Session("Custom3") = CmdCheckUser("Custom3")
   If CmdCheckUser("Custom4") <> "" Then Session("Custom4") = CmdCheckUser("Custom4")
   If CmdCheckUser("Custom5") <> "" Then Session("Custom5") = CmdCheckUser("Custom5")
   If CmdCheckUser("Custom6") <> "" Then Session("Custom6") = CmdCheckUser("Custom6")
   
   ' End of optional session variables to be set

If you do not need a particular variable to be set as a session variable simply comment that line out with single quote.

If you have an extremely busy site with a lot of users this is a good idea. If not, you probably don't need to bother doing this. I added some code in there so they will not be created if they are empty and that alone helps out a lot.

Permissions and Folder Locations

By default and to keep things clean we store everything in folder called "data"

That folder then has it in 4 sub folders

database (where the .mdb and temporary .ldb files are handled)
export (where the aspprotect export files are saved)
logfiles (where the aspprotect logfiles are saved)
user_pics (where the user pictures are saved)

Doing it this way makes it very easy for a system administrator to right click on one folder and set permissions for that folder and all of it's child folders.

Now, that being said.. you do not have to use these folders.

For example if you already have a folder in your web with modify permissions for the anonymous webserver account then you can use that one folder to store all of the 4 things above.

You'd simply edit your data connection string to point to that folder and then edit the other paths in the settings area of ASPProtect.

We did it that way so you would have options in case your hosting company was being difficult with your ASP hosting needs.

I wonder what that ENDSQLMail send failure is all about ?
I dont use anything regarding SQLMAIL in the ASPProtect code.

I think I might need to go in so I can debug a bit. Everything seems to work fine with a SQL installation here so I just don't know at the moment.

If that is ok with you I would need ftp access or something so I can trry a few things and hopefully figure it out. Admin access to the aspprotect admin area as well so I can see what you have set up in there.

PM me with that info if you want me to take a look.

Christopher

Thanks for a speedy reply.  This is what I have used most recently...

ListingsConnectionString = "DSN=longreach;UID=lradmin;PWD=skipper;"
DatabaseType = "SQL"

but that throws an error of:

 [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

I have private messaged you my SQL server IP address.  I am a fast learner with ASP (I think!) but some things really catch me out!

I'm trying to use CDOSYS.

It seems to work fine on the web page, however the mail never gets
delivered.

I can see my messages sitting in c:\inetpub\mailroot\pickup but they never leave it.

I found another folder after doing a search for "pickup".... it is:
d:\program files\Exchsrvr\Mailroot\vsi 1\PickUp     If I paste the files
into there, they get delivered.

How can I get the email to be delivered without doing the cut and paste?

I've tried it both with and without authorization.

I am running a Windows 2000 server with Exchange 2000.

Thanks.

humm, yea thats a data connection error..
really not related to the asp code in the application for the most part.

that is low level

If using MSACCESS

I would make sure permissions are set correctly on the database folder (not just the database file itself)

I would make sure your using at least a 2000 version of the database. 2003-2003 format being better.. 

I would make sure the server has up to date mdac/odbc drivers.. (that is really the server admins responsibility)


As for permissions there are articles in our forums about exactly how they need to be set. Improper permissions can cause a ton of random errors like that.

Yeah sorry you are right. It works for me

http://www.rottys.net/gallery/default.asp?CatLevel=2&Cat 1_ID=5

I'll send you something..

Line 409:
Line 410:
Line 411:		<authentication mode="Forms">
Line 412:			
Line 413:			<!-- DO NOT CHANGE UNLESS INSTRUCTED TO DO SO -->

How to set a new users expiration date.

You'll need to edit the "users/add_new_account.asp" with a text editor.

Find this section..

<%
CmdAddUser.Fields("ValidateEmailCode") = ValidateEmailCode
CmdAddUser.Fields("Access_Level") = "4"
' PUT YOUR CODE HERE
CmdAdduser.Update
ID = CmdAdduser("ID")
CmdAdduser.Close
Set CmdAdduser = Nothing
ConnPasswords.Close
Set ConnPasswords = Nothing
%>

You'll want to add code like this right between the Acccess_Level  and Updates section

CmdAddUser.Fields("Expiration_Date") = Date + 60

That will give take todays date and add 60 days to it.
You can of course do whatever you want here.

Actually, any database value for the user can be set during registration.

You can also change the default Access_Level to whatever you like.

When I add a user, I can not activat it.

It sends me back to log on and will now allow me to log in as admin???

I can restart the APP and log in as Admin, but the user I added

is still not activated??

My system will also not allow me to set the Stay Loged in FLag.

It just ignores it....

hi,

no.., not unless you come up with some clever way to handle it on your own
http://support.cjwsoft.com/code/code_info.asp?TID=369&KW =https
read 2nd to last post

The way ASPProtect ships it is designed to either be in http:// the whole time or https:// the whole time.... (there curently is no solution from me allowing going from one to the other)

sorry

basically one at a time because of limitations of the file uploads that browsers can support 

more on that here
http://www.aspphotogallery.com/pro_add_ons.asp


An Admins can however ftp a bunch of pics to the import folder and import them into any album all at once pretty easily

Christopher,

Thanks for the reply. I think I've found my problem, but can't test until later in the evening as it is on a live site.

Darrell

Is there a simple way to upgrade from 7.x Lite to 7.x Full?  I was testing out the software and I just purchased it.  I have made some look and feel changes to the lite version (ie: login page), but no look and feel changes to the admin section.  Is there certian files that I can add to have the full version without shorting myself features or functionalbity? 

Thanks

You should read my article on server side includes… the path to the include file must of course be adjusted depending on where in your web you are.
http://www.powerasp.com/content/code-snippets/includes.asp

You will also notice if you look at the provided example pages that the include paths have been adjusted to make sense.

If it is 2 directories down it should probably look different..

example:)   "../../checkuser_inc.asp"

It’s weird that if you are not getting an error because if the path to the server side include is wrong you should get a nasty server error.

Also..

The ASPProtect system and any pages it protects must also be part of the same Application in IIS. It’s the nature of forms based authentication. Do a google search if you are not sure what an application is in IIS.

Lasty…. If you are logged in at the time

Whether your current session at the site is still active… or you have the cookie set to remember you.

Well, nothing will happen… cause your already logged in and you will just see the page as normal.

Perhaps things are working and you just don’t understand that part ?

You need to go to the log off page.. log off… then close all instances of the web browser windows..

Then come back to the site… then see if it prompts you to log in.

Ok, so I checked to see if ASP is running on the server and it is.  then I added code to the top of a page and this is what i can see when 'view Source' on the web browser:

<%@ LANGUAGE="VBSCRIPT" %>

<!-- Begin ASPProtect Code -->
<!-- Groups with access to this page. ( * Admins * ) -->
<% GROUPACCESS = "4" %>
<! #INCLUDE FILE="check_user_inc.asp">
<!-- End ASPProtect Code -->

<html>
<head>
<title>TeamManagers</title>

Yet I get no challenage for a password and no error message!

Is there any way to extend the limit multiple login feature to a certain number instead all or none?  In other words, i need to have a user be able to use the same login for x number of people.  My customers are institutions and want to be able to have a single login for however many users they purchase for.

ok

thanks