how di I change the currency dollar sign to gdp pound sign ?

I need all my tranactions in gdp puund sterling to use on paypal

regards

simon

the reason being is because when I do installs I do not touch any of your existing content. I only install the base application and make sure everything in it working correctly and also that the example protected pages are working. I do not integrate it with your existing site or edit any of your existing web content. That is up to you

sorry about that, but it would be way too time consuming and editing people's existing pages is a good way to cause a lot of headaches for me and the customer if something goes wrong. Not only that but everyone uses the system differently and it wouldnt make sense for me to be the one doing that based on access levels, groups.. etc etc  which will all be custom to how you want things set up.

more on installation policies here.
http://www.cjwsoft.com/installation_service.asp

Christopher
We are actually having a lot of problems with this software.

Apart from the above problem of the email not being in the database as details above we also do not get any reply emails from any forms, the mass email button does not appear and the forgotten password does not send emails either.

We have CDONTS Version: 2.80 Installed as the email system, this is operational on the server. I have tested this with server_info.asp to check.

I can email you direct any other information you may need.

Regards

You can mix and match banner calling methods all you want.
Try it and see what happens.

However, the only method that is going to work on non ".asp" pages is the javascript or the new iframe method listed in the support forums.

Hi,

I did some layout customizing on the register page on my site. ( http://www.lonestaricon.com/aspprotect/paypal_sub_signup/reg ister.asp)

Now when I tried to register, it seems like it goes to the next page, but it is blank.
( http://www.lonestaricon.com/aspprotect/paypal_sub_signup/add _new_account.asp)

If I log in under administration, it shows that I have registered. I can't seem to figure out what part of the code is wrong, so that the new account page will not load.

I'd would greatly appreciate any help with this.

Thanks,

Allison

Is it possible to change the currency for accepting payments?  I will like to change from US to Canadian.

Thanks in advance
Roy

Well, I assumed I'd be able to tweak this thing but it is all so intertwined it doesn't pay to mess with any of the files. Hence, I'm going to have buy a different system only a week or two after buying the unlimited version here.

As I leave I want to give you some impressions here. While the system is low-cost, the 99 dollar version is missing a few pieces that I think would bring the value to 99. It is one thing to talk about the speed/performance, but to a degree that's hard to measure, and to anyone with web advertising on their site, performance will always run second to potential site income.

It definitely needs a user interface and registration for advertisers, and it definitely needs a single variables file for changing the hundreds of variables for which there is no control. I had to search on my own just to change the look and feel.

Lack of multi-zone support is a serious drawback. I would submit that anyone with a serious website needs it, and will gladly pay you 139 over 99 for just that one feature.

Take them or leave them, they are just suggestions.

How can I make so it goes to certain webpages if user enters valid username and password??

I suppose user enters its information on check_user_inc.asp page, and username and password are stored on SQL database.

Thanks

Yes, as long as each installation is in in it's own web site.
(or at least in it's own application in IIS)
Meaning you could have 5 directories in your site each with the app installed as long as each directory got set as an application in IIS.

Remember, a license must purchased for each running install except for development reasons on local machines.

I have a very weird problem.  At the top of the page, where there used to be

[Place Ad] [Classifieds Home] [Register] [Sign In]

now there is only

[] [Classifieds Home] [Register] [Sign In]

so the words "Place Ad" have disappeared completely.  Can you please tell me which file in which folder would control this

The sql script creates aspgalleryuser

dataconn_inc.asp out of the box indicates aspgallery as the user.

GalleryConnectionString = "Provider=sqloledb;Data Source=127.0.0.1;Initial Catalog=aspgallery;User Id=aspgallery;Password=temp;"

ADODB.Recordset error '800a0cc1'

Item cannot be found in the collection corresponding to the requested name or ordinal.

/aspprotect/password_admin/default.asp, line 287

I'm doing an upgrade from an OOOOOOOOOOLD version (not sure if it was 6 or not) and it read my database OK prior to adding a new user. Now I get this error message. I was able to run the password encryption function OK, but I still get this error when I try to view the password_admin stuff. I can log in via the "get_me_in" asp page just fine, but I get the above error.

If I try to log in with my admin account, I get

ADODB.Recordset error '800a0cc1'

Item cannot be found in the collection corresponding to the requested name or ordinal.

/aspprotect/password_admin/check_admin_inc.asp, line 166

*****

OK, my question is this... if I retype all the info from the old DB into a brand new one, never before used, that would work, right? I only have 108 users, so that's about an hour of work. Or is there a 5-minute fix that I can try? I've done some messing around that got nowhere and returned all edited files to their original state, with the exceptions of the ones calling the DB location.

I'll start the C&P process and await your reply...

On a side note, I really love the new format and am excited about the new features. I'm not married to upgrading the DB and if copy and paste is faster (I just need first name, last name, username, password, email, and expiration date), then I'm using v.7 that much faster.

Ya, you must have tried to upgrade from a really really old version like you said which wouldnt really work out because those instructions are specifically for upgrading a version 6 database to version 7.

That line error you had was looking for the User_ID field and I bet the version you had was so old that you didnt have a field named that as a few years ago the field "ID" got renamed to "User_ID"

As for all the cool stuff... yup there is a lot of cool stuff in this version... glad ya like it so far

Sorry about earlier post in wrong area-

I have followed instructions to set up access levels (adding the

<% CHECKFOR = "4" %>    for user level 4 for instance.) The database is connecting properly and the basic check for login is taking place, but it seems that all users have access to all levels no matter what is on the database; i.e I set up a test page with "checkfor=4" and all users have access to it, even those with lower leve access.

Any ideas?

Thanks

I purchased two site licenses for ASP Protect a while back and am now trying to implement the application.

The connection to the database is fine, because it recognizes the user and displays the user name.  However, there must be a problem with the permission because I get the DNS error information from the On Error in the check_user_inc.asp file.

I set the permissions on my PC as you indicated, both on the folder and the database file.  But get the error and cannot access the database to view or modify.  I also uploaded the file to my web server and set the permissions as well, but get the same problem.

You mention on your forum that it is not the code, but I don't understand if the code is correct and if it finds the database and the permissions have been set as you indicate, why doesn't the code work?

Why all the pages at the directory .../password_admin/ are very slow to open online?

If you are using an ACCESS Database try to avoid using a system DSN. They are much slower because they go through ODBC which then uses the Jet Drivers to access the database. They also have to do a registry lookup.

ttp://www.4guysfromrolla.com/webtech/070399-1.shtml

http://www.powerasp.com/content/database/dsn_vs_dnsless.asp



It's funny because in the 4guys article they ask the question..

"Hmmmm... so who was right, Microsoft or Wrox?"

I'll tell you who was right and who said it 1st.  It was me and I said it on my old powerasp.com site before anyone else ever did.

I found it out on my own by experimenting when I was the Systems Analyst for an large ISP. We we had web servers that were not running well. I didn't read about this solution anywhere because no one was talking about it at the time. Microsoft said use System DSN's so everyone just took their word for it.

I took a lot of heat for saying that back in the day but over time everyone started saying it.

I am using ASPProtect's password program, which has been very successful, for managing over 1,500 military veterans' memberships at http://www.vspa.com.  What I am trying to do now is utilize the "Groups" code, as generated by the Admin page, to prevent members with expired accounts (and non-members) from accessing restricted "members only" .ASP pages they may have bookmarked, or found via web search. The code generated and used is as follows:

<%@ LANGUAGE="VBSCRIPT" %>
<!-- Begin ASPProtect Code -->
<!-- Groups with access to this page. ( * ADMIN * Member Current * Member Life * Officer/Staff * ) -->
<% GROUPACCESS = "10,12,14,19" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
<!-- End ASPProtect Code -->

The above is placed over the <html><head> statements on the page.

When I am logged in the code works perfectly! When I log off and try the URL again, the page appears in its entirety but with a Login box for Username and Login Password at the top of the page. You may view the problem at: http://www.vspa.com/aspprotect/vspa-password-enter.asp .

What I would like to have happen is expired members and non-members would be sent (or Redirected) to a Login page. I do not want the Login password box to merely be inserted above the page that I am trying to keep them from visiting.

Don Poss,
VSPA Webmaster

Can you do a better price deal for that version in place of the one I've just purchased ie for a single licence rather than unlimited Christopher?

Or failing that can you give me an idea of how many changes you had to make to convert 7.3 to work with Mysql?

Regards,

Dave

Help!.. I need to export the username and password fields to a mail merged letter so everyone knows their username and passwords. However whenever i access the database or do an export. The passwords showup as encrypted. Is there a way to access the list, un encrypted?

thanks

I had never noticed this before, but a customer sent me email to say that they had set up their aspclassifieds profile such  that they be contacted by email and not by phone.

However, in their ad, their phone number still appears. The lines in view_ad.asp that check for True values for the Contact_Via_Email and Contact_Via_Phone before displaying that information seem to always evaluate to True, regardless of their setting in the database.

I'm using an Access2000 DB for this. When I open the DB in access, I see the checkboxes correctly unchecked for phone and checked for email. However, if I do a quick test to display the retrieved values in the view_ad.asp (<%=contact_via_phone%> <%=contact_via_email%> they both display True.

What gives? I have had nightmares with Access and its weird handling of true/false 0/1 yes/no fields, but this is driving me nuts.

My Admin user got corupted, and I need to reset the password and user, what is the defualt password for this database, as I do not think I have changes this (hopefully) as of yet.

Regards,

Paul

More info on the groups session variable.

Session("Groups") will contain the ID numbers of whatever groups the user is a part of.
It does not store the descriptive name of that group. It will show the same data that is actually stored in the "Groups" field in the database.

for example it might hold a value like this

*2*,*5*,*9*

meaning a user is part of groups 2, 5, and 9

so if you wanted to check to see if a user was part of a particular group you would do something like this

<%
If InStr(Session("Groups"),"*9*") Then
     Response.Write("You are a member of group 9")
End If
%>


Taking this even further, if you really wanted to get a particular group's name or description you would have to query the database like so. In this case we ask it the name and description for group 9.

 Group_ID=9
 Set ConnPasswords = Server.CreateObject("ADODB.Connection")
 ConnPasswords.Open ConnectionString
 Set cmdTemp = Server.CreateObject("ADODB.Command")
 Set CmdEditGroup = Server.CreateObject("ADODB.Recordset")
 cmdTemp.CommandText = "SELECT " & tbl_label_groups & ".* FROM " & tbl_label_groups & " WHERE (Group_ID = " & Group_ID & ")"
 cmdTemp.CommandType = 1
 Set cmdTemp.ActiveConnection = ConnPasswords
 CmdEditGroup.Open cmdTemp, , 0, 1
  
 Group_Name = CmdEditGroup("Group_Name")
 Group_Desc = CmdEditGroup("Group_Desc")

I just installed the software, but I can't find any place where I can see when users logged in, can someone please tell me where I can do this?

Thanks

The problem was that I did not have

ConnectionString = "Driver={Microsoft Access Driver (*.mdb)}.... in the connection string.

Thank You.

It's not working because i guess im copying the viewstate also...and it comes up

Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.

I just added this line to the paypal1.asp page

<input type="hidden" name="currency_code" value="CAD">

and it worked.  Clearly other values can be entered for other currencies.  Everything was listed in this manual https://www.paypal.com/en_US/pdf/subscriptions.pdf.

Cheers
Roy

Christopher

Many Thanks

Seems like its working just got to test it bit to see, though it wasnt going to work as I had one too many End If's after the last part of the code you done for me. But even I eventually sussed it, nothing to do with your bit just another mistake on my part

Great to get support like this especially on a Saturday

regards

John