I getting a strange error with ASPProtect.

 Microsoft OLE DB Provider for SQL Server error '80040e14'

Unclosed quotation mark before the character string '¾_^Ö'.

/aspprotect/check_user_inc.asp, line 114

If I check the database directly "¾_^Ö" is the exact string for the password.

Any Ideas

I'm using version 6 upgrade and recently some of the users complained that their passwords are no longer working. I was able to replicate the problem as I also experienced the same thing with my account.

Once I reset the password thru e-mail (Forgotten your password?), I am able to login but it fails later. This is weird as I have an identical copy of the code running flawlessly  on my test server.

The only change which I made to the original downloadable code is by adding password encryption using Base 64 encryption.

Any ideas what might be the problem

maybe this is the issue...

do you realize that the descriptive name you give a group is not always going to be the same ID in the database ? The two are not related.

Perhaps what you named Group 1 is really group ID 3

You can tell for sure by generating protection code for group 1 and see what ID it tells you to use..



You also need to remember that you are testing this with different users and it is really easy to get confused so you need specifically log off using the log off page to ensure session info from the previous login doesn't show up and cause confusion when you log in with a different user... etc etc

in addition to logging off that way you may also want clear the session and application info via the code at the bottom of my article
http://www.powerasp.com/content/new/displaying-session-and-a pplication-variables.asp

and do that in between any user you log in as

I installed the ASPProtect.NET project no problem.  I am using VS.NET 2003 on Windows XP SP2 (and fully patched).  I am able to build the project successfully, however I cannot debug the project.  I get an error "Unable to start debugging on the web server. The project is not configured to be debugged."  The web app runs fine just browsing to it.

I know this is an isolated problem particular to this project.  I have MANY other .NET projects that I can debug without any problems.  I have tried going into IIS and turn on the debugging for server-side script debugging and making sure my IIS application setting were configured correctly.

Can anyone shed any light on this at all?  Christopher, is there any reason I should not be able to debug this?  (i.e. the aspprotectlicense.dll)

Thanks,

K

OK, well, that error is pretty self explanatory really. There isn't anything else it could mean.

What you showed me in that screen shot all looked correct, but still permissions to that file just can't be correct. The paths are correct. The path to the file looks correct. The ASPNET (ASP.NET) account looks correct.

I would try settings permissions directly on that XML file. Perhaps child permissions did not go through the way you intended. (the advanced tab must be used for that) If that doesn't work try giving ASPNET and Everyone full permissions on the file directly.

Possibly check the paths in the web.config file just for the heck of it.

Last case scenario, you can edit that XML file directly instead of using the screens in the application. Of course if that file does not have correct permission chances are other things like log files will give you issues as well.

That is all I can think of right now.

Hi,

First and foremost, a great product. I downloaded it last night and it took little effort to get it up and running

.....now a little question...

Has the software/code been tried out on a Mysql db and if so did it work?

The reason I ask is that my website is very busy (1.5million page views per month avg) and I'm considering converting the ASPBanner Access db to a Mysql one to help handle the traffic. For every page view one banner impression is being made which means that the Access db is under a bit of pressure

This afternoon there were 1012 simultanious users on the website and it froze with an error message displaying where the banner should have been (I didn't quite catch the message but something to do with the banner script timing out). I'm not sure if the Access db had something to do with it but it seemed too coincidental. Rebooting the server cured the problem but obviously kicked off the visistors as well
At present there's 668 online and no problems so I'll have to monitor it to see how it goes but if anyone can answer the Mysql question I'd be grateful

Thanks,

Dave

Thank you for the response to my question. In the mean time if I can figure any workaround I will post it here.

yes, PM me the encryption and cookie keys if you don't mind.
I can add it to my combinations that cause trouble.

it might help me to figure this problem out.

I have a solution for asp already but thanks anyway. Is there a good book or other learning tool I can purchase that you might know about? I would know where to start about how create a timed subscription in .NET.

Protecting ASP Pages

To protect a page without using the Access_Level or Groups feature simply add this code to the top of that page.

Put this under the <%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

This is an example of a File Server Side Include. You could also use a Virtual Server Side Include.

The following URL explains what Server Side Includes are.
http://www.powerasp.com/content/code-snippets/includes.asp

Now when someone runs that page they will prompted to login. They will not be allowed access to that page until they successfully logged in.

An example of doing this is provided in the "default.asp" file included in the root of the Password System.
Look at the source code with a text editor to see the working code. It is quite simple.

 Protecting ASP Pages Using Access Levels

To protect a page using the Access Level feature simply add this code to the top of that page.
You simply specify the Access Level before the include file is called. In this example we are protecting the page with Access Level 4.

Put this under the <%@ LANGUAGE="VBSCRIPT" %>

<% CHECKFOR = "4" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

This is an example of a File Server Side Include. You could also use a Virtual Server Side Include.

The following URL explains what Server Side Includes are.
http://www.powerasp.com/content/code-snippets/includes.asp

Now when someone runs that page they will prompted to login. They will not be allowed access to that page until they successfully logged in as a Level 4 user.

Examples of managing Access Levels are provided in the "multiple_access_levels" folder included in the root of the Password System.
Look at the source code of the ASP pages in that folder with a text editor to see the working code. Again, It is quite simple to follow.

Protecting ASP Pages Using Groups

Please see the code generators in the admin are for the code to do that.

I would highly suggest setting up a DSN-LESS connection.

That system dsn is most likely the source of your trouble It is probably that or permissions are still not correct.

I can't tell you how many people have had trouble with system dsn's and finally set up a dsn-less connection and everything then worked as it should.

The location of your database is fine as long as permissions are truly set correctly like I mentioned.

Also, be sure you are setting the database type correctly in the dataconn_inc.asp file. That can cause problems as well as some people have been known to delete that line.

See my articles...

http://support.cjwsoft.com/code/moreinfo9-1.htm

http://support.cjwsoft.com/code/moreinfo136-1.htm

http://support.cjwsoft.com/code/code_info.asp?TID=40&KW= system+dsn

Hi Chris,

The hosting company has been doing some work apparently regarding the database connection issue. Still something is funky

When I type in www.vickerylightning.com/aspgallery/default.asp I get the custom 404 error page and I noticed that it is trying to open the following:

http://www.vickerylightning.com/skins/default/settings.asp

Is that what it is supposed to do?

Thanks!
Rhona, the rookie

Not to be pushy, but how's the new version progressing?

I'm hoping these features will be in it:

• possibly add the ability to move pictures around in an album. and maybe between albums, I must also remember to move the ratings and desc as well for that image.
• possibly add a feature to store 3 versions of images uploaded
  thumbnail, medium res, and high res/original

• add option to store the images orginal name in the images description area during upload
  may be helpful to people that name their images in a somewhat descriptive way

• add support for the ibulc bulk upload client that I recently discovered

If you could use a beta tester, I'm still just setting up my site and would be willing to run a beta.

Thanks

Al

Hope the wedding went well.  I have one this weekend.

I was successful at performing an upload.  The free upload software was either not configure properly (probably) or not working.  I downloaded the trial version of softartisan's upload (which is like over $300) and it started working. 

Can more than one photo be uploaded at one time (like a whole folder full of photos) or does each have to be done individually?

I am brought to a logon page in which I cannot access the page.  This must be due to the check_user_inc.asp include.  Without the include I get a blank page.

in Control_pic.asp is there way to wrap the description field so that it doesn't go outside the table.

Thanks

We do not support customization of the code or any custom coding you may end up doing with Visual Studio.NET. However, if you can show me that the application functions incorrectly in its default unmodified form I can help. If not it has to be something you did most likely.

Though I do not if it is the issue, mixing c# and vb.net in the same project can be tricky if not problematic. It’s definitely just not something I can support.

If you have not seen it we have tuturial on setting up the project in visual studio.net.
http://support.cjwsoft.com/code/moreinfo85-1.htm

I would suggest starting with a clean installation. Test everything to make sure the things you say are ok or not. (if not post here about it) Then try your hand at editing the application and compiling it. Keep the c# out of the mix at 1st.

I am not even sure if adding c# to the same project is feasable.
(maybe it is , maybe it isn't)

That being said.. ASPProtect.NET can of course be used to protect pages using c#. But compiling the ASPProtect.NET project with C# code added sounds a bit iffy to me. We wrote the application in VB.NET so you really need to use vb.net when making changes to it.

My hosting company uses ASPEMAIL - and I am trying to setup the mailing settings on ASPPROTECT - but cant seem to get it to work.   I've tried many different options - here are two that are the closest - but have issues:

1. If I use the settings:

email component: aspemail

Mail remote server: my internal server name

*no smtp authentication

email mail notification - my email address on my internal server

***I get the following results:

       I can get get notified when a new user logs in, email a user from aspprotect user screen if they are in my company and have a valid email -- but I can not send to the outside world - I get an relay prohibited error.

2. If i try to change the setting to use the Hosting Website email server - I get the following results:  I dont get notified when a new user registers, I cant send to internal company people - but I can send to the outside world.

**any suggestions on what to do? I'm trying to work with the people who manage the mail servers - but since I dont know anything about them - its a bit difficult.

[/QUOTE]

The relay error is because when you send emails outside your email domain smtp authentication is required.

I suggest trying to use CDOSYS with the smtp authentication option. CDOSYS is on all servers by default and is really the way to go. Use a real email account and password to send the emails through the server.  Be sure to check smtp authentication for cdosys and to specify all that info for your email account and password in the settings screen.

If you want to know about CDOSYS read my article.
http://www.powerasp.com/content/new/sending_email_cdosys.asp

Hello Chris:

Let me run some more test if it's working on your end it should be on mine?  I have made some custom updates to the code but no in that area.

Thanks,
-Ricardo

Thanks

It wasn't a complaint. I just bought it last night and installed it today. But, I must have missed the part about requiring Enterprise Manager for installing it on SQL.

If you want it the link to the Web Based SQL Manager is : http://www.aspenterprisemanager.com/ which is free and the Trialware that I tried is EMS SQL Manager.

Maybe that will help a little in not requiring that people have an MS SQL license to access their hosted MS SQL to install the software.

Thanks

I have an asp page that includes other asp pages via an include.  for example:

snippet code: file name: collaboration.asp

 <table bgcolor="#bed1e4" border="0" cellspacing="0" cellpadding="10" marginwidth="0" marginheight="0" leftmargin="0" topmargin="0"> 
    <tr>
    <td>     
     <!--#include file="../../../filetransfer/directory_listing2.asp" -->
    <BR><BR>
     <!--#include file="../../../filetransfer/upload.asp" -->
    </td></tr>
   </table>

I can add the code below to collaboration.asp and it seems to work,but I cant seem to figure out how to protect the other files such as upload.asp at the same time. -- can you help?  - Note: as soon as I add the code below (and adjust the path) - I cant bring up the page.

This is the protection code I am using.

<!--#INCLUDE FILE="../../../../aspprotect/check_user_inc.asp"-->

Shirely

Not a problem.  Have a good time at your wedding.

thanks!

yea.. it sounds like aspimage is not working right.

You wont get any errors..

I would suggest using some of aspimage's sample asp pages in your web and see if they do their thing. You need to be sure aspimage is working correctly under the ,ost simple of circumstances

Though ASPImage is the standard in ASP image resizing and has been around forever and it works very well. Their support is almost non-existant.. in 6 years they have never answered any email I have sent them. I have sent them 6 or so over the years and then just stopped trying. I bought a server bundle too way back then for like 300.00 or so when we had a company called gisco. You would think they could answer my emails. I think that guy just made a ton of asp components back in the day and then just took a seriously long vacation. Updated them a few times in between when he felt like it and making good money the whole time.. More power too him I guess. I'd love to be in his shoes when he sells an enterprise license for 3000.00. Maybe he isn't even around anymore and the someone he knows just kept the sales going. Who knows..

Anyway... it does a great job when ya get it working.

Personally this is how I install it and it works every time.
I like to put their dll in the system32 folder.
Register it.
Run their licensing prog to make it a full version if you paid for it yet.
Right click on the dll and give the "everyone" account modify permissions
Right click on the "windows/temp" folder and give it the same permissions

I'm using the groups protect feature on my pages. None of them seem to close the session after clicking 'logoff'. I can tell because if I hit the back button and return to the group-protected page, hit 'refresh', the page refreshes, I'm not asked to log in again.

On the other hand, when I open a page that's protected by an access level and click 'logoff' (uses same logoff asp file to logoff), it seems to work fine - if I go back a page and refresh, it asks me to log in.

Just wondering - is anybody else having problems like this? Maybe I screwed something up in the few adjustments I made a while back. Any idea what it might be?

New Features added to 7.x

1. Entire application gone through and updated.
2. New graphics, new look and feel
3. Passwords and Cookies are now encrypted using separate keys individual to each customer install.
4. Groups Feature... powerful way to protect pages based on group access
5. Ability to upload a picture for each user.
6. New printable profile user screen.
7. Supports 13 email components as well as outgoing authentication for a few of the email components
8. New Lockout option. "However many" try’s to login and you are locked out for a certain amount of time.
9. PayPal signup routines for both single payments and subscriptions integrated into the application. Everything is handled automatically. Charging for membership couldn't be easier. 
10. New Newsletter Feature allows you to send newsletters to those subscribed. 
11. New ability to Email users soon to expire
12. HTML emailing for people using CDOSYS. This includes an inline html editor so you can send out some really professional looking emails.
13. Ability to redirect a user anywhere on 1st login
14. Option to turn off Login Remember Me Feature
15. Login Form now very easy to edit
16. All paths for places that need permissions can be easily changed.
17. Works with Parent Paths Disabled on the web server.
18. Company Name is now an optional field
19. Handy javascript popup date selectors
20. All date functions now internationl date friendly
21. Password conversion routine to upgrade existing users to the password encryption
22. Import / Export of user database built in
23. Protection Code Generators
24. Notes Feature. Javascript Popup on users screen that allows you to quickly see information without going to their edit screen
25. Mass email users incuding ability to send them usernames and passwords all at one time.
26. Option to not allow concurrent logins by the same username
27. Optional feature to keep track of recent users that have logged in as well as allow you to view the information.
28. Optional feature to keep track of recent users that have logged in, what pages they accessed, and when, as well as allow you to view the information.
29. Ability to protect other files types other than just protecting the viewing of the ".asp" pages. We provide working example code showing you how to protect images and file downloads in your protected ".asp" pages. You can protect nearly any type of file from downloading and viewing. (gif, bmp, jpg, zip, exe, pdf, rar, mp3,etc..)

Hi, I have not gotten anything from you about it.

click on the PM button below and send it that way through the forums.

Thanks

The code is ok..

Your getting an error because no banners are showing up in that zones rotation.

run this directly in the browser and you will see that there are no banners being generated for that zone ID
http://www.poconocommuter.com/aspbanner/aspbanner_inc.asp?Ba nnerZone=6

As a matter of fact I dont see any banners showing up for any zones previous to 6 which tells me either you dont have valid banners in there or the application variable info got corrupted do to a server crash / power off or something.

http://support.cjwsoft.com/code/moreinfo95-1.htm

It almost seems like allow images is denied.  When I look at the ad it doesn't even show a place where the thumbnail or image would go:

Columns now are Ad Name/ Price / Expires / Hits

There used to be one before Ad Name.

Even unchecked (saved) and checked

Use_Picture_Upload

< = value=True name=Use_Picture_Upload> Check this if you will be using the picture uploading feature.

This is a great article for newbies..

Hints & Tips when working with ASP
http://www.powerasp.com/content/hintstips/common_sense.asp

Hi Chris:

Is there a way I can include the username and password in the URL of a protected page to gain access to a that page without going through the log-in page?

I'm not quite sure what the syntax would be in the URL.

Warren