How can i get to this to register someone in the database only after the Paypal payment has been accepted.  I was testing it out to see if it makes it to my Paypal account (which it did just fine) then I closed Paypal before paying.  I logged in as the administrator and looked at the member list and the account was created anyway.  How can I stop this from being created until "only" after the Paypal payment has been "approved"?

What if this person never comes back to "try again"? Now the username he used (and is inactive) is not available for anyone else to use.  And it takes up database space.

I am using the Paypal (non-subscription)

Thanks in advance,
scottyFlasher

Great software.

How easy would it be to copy the email address entered at registration directly into the login id field so that the user's email address is automatically used as the login id? 

Also, where in the code can I turn off the random password generator - I'd rather force people to pick something they can remember themselves.

Thanks,

Nick

Christopher
We are actually having a lot of problems with this software.

Apart from the above problem of the email not being in the database as details above we also do not get any reply emails from any forms, the mass email button does not appear and the forgotten password does not send emails either.

We have CDONTS Version: 2.80 Installed as the email system, this is operational on the server. I have tested this with server_info.asp to check.

I can email you direct any other information you may need.

Regards

Its not on their end. Using ASP alone you really won't be able to send more than around 300-400 individuals emails at a time before things will time out. Its just that ASP is not an efficient way of sending email and it never will be.

You really should look into worldcast like I mentioned before.
http://www.fairlogic.com/worldcast/

Then just export the email list from the database into worldcast and send out the newsletters.

You will get much better results and perfect newsletters and it really only takes a little bit longer to do each time once you figure it out. That is how I send out my PowerASP and CJWSoft newsletters and it works perfectly every time.

The login page sends the user to redirect.asp (which is as follows)

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
 
<%
If InStr(Session("Groups"),"*1*") Then
    Response.Redirect("gp01.asp")
End If
%>

<%
If InStr(Session("Groups"),"*2*") Then
    Response.Redirect("gp02.asp")
End If
%>

I am not being redirected to gp02.asp if I am a member of group2.  Also, we wish users who are part of group 2 and 3 to go to a different page (ie. gp2-3.asp)

Thanks in advance.

ok... lets forget about all this redirecting business for a minute

when I go to "GP01.asp" directly via your web site I get a big nasty error that says this

Microsoft VBScript compilation error '800a0411'

Name redefined

/protect/config_inc.asp, line 15

Dim  Address_Required,CDONTS_Installed,City_Required,Registration _Type,VerifyURL,Log_Off_Page
----^ 

then when I look at what you did in that file I see why

you have this code which is totally wrong because you cannot include the password protection file twice

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
<% GROUPACCESS = "*1*" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

it should be

<%@ LANGUAGE="VBSCRIPT" %>

<% GROUPACCESS = "*1*" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

and that is probably the root of this entire problem.. the redirection was working...
but you were sending them to invalid pages with errors

all those pages are wrong...

if you dont see the real error above see this

http://support.cjwsoft.com/code/moreinfo11-1.htm

if you look over the aspprotect 7 installation instructions that is the very 1st thing I tell people to do

hopefully this is the info you need to continue and get some work done

Version 7 uses.. RC4

The upgrade process is described here in detail including a procedure to convert existing clear text passwords to the encrypted versions. (Your passwords will need to be clear text as the system shipped of course for the conversion to do its thing)

http://support.cjwsoft.com/code/info24.htm

It is also covered in the downloadbale docs
http://support.cjwsoft.com/code/moreinfo221-1.htm

Many people have done the upgrade without any issues and Version 7 is getting great feedback.

Should you decide to go with it there is upgrade pricing.
http://www.aspprotect.com/purchase_v7_upgrade_pricing.asp

Update..

I have support for the ibulc image uploading client working.

http://www.ibulc.com/

There is also an option in asp photo gallery pro to store the images original filename in the description field which is pretty cool.

Ibulc client bulk upload support currently only works with the pure vbscript upload or the safileup component. (I may support the other two components asp photo gallery can use but it really depends on time) The pure vbscript upload code I am using for this is much better than the code I was using before so that method should be offer decent performance for anyone though using a component is always better.

I still have to add the ibulc feature to the users side. It currently all only works for an admin user.

The whole process is very cool. You install the ibulc client on you computer. It's tiny, and free for uploading up to 10 (100kb) pictures at once. You have to by a domain license from them to do more than 10. Anyway.. it lets you select multiple pictures off your hard drive and it then uploads them all at once with individual progress info for each picture. Its really cool and since it really treats each picture as an individual upload it doesn't hammer the server with one big upload at once.

I also made it so you can start the picture uploads at any picture number.
So if you already have pictures in an album you can add more without losing what is already there.

This was one of the main features of the new version and now that it is working hopefully I can tie up any loose ends and get the new version out soon.

One is for paypal subscriptions (recurring billing) and the other is for single payments

http://support.cjwsoft.com/forum/forum_posts.asp?TID=185& ; ; ;PN=1

http://support.cjwsoft.com/forum/forum_posts.asp?TID=186& ; ; ;PN=1

You can delete any of the 3rd party payment directories you are not using including the the 2checkout one... (all those folders really are is a copy of the users folder specially modified to handle a certain payment processor)

Just Don't delete the "users" folder though as there are things you do there that you can not do anywhere else..  quite a few things..  editing existing account info, looking up passwords... etc etc

Thanks for that.

I have tried InStr("*2*",>"0") in the query design window but it does not return any members.  

I have orded a Access Bible to help me in furture

I do not think it it anything to do with the Application.

You most likely have some sort of ad blocking software that is doing it.

It is seeing the word "banner" or "ad" and blocking the images in your browser.

I doubt it is anything built into xp doing it. XP with SP2 has built in pop-up blockers but no ad blockers like that really. It is norton ad blocker or something of that nature.

Chris,

I've given the IUSR account modify access for the aspprotect folder.

In the ODBC manager module on the webserver I've taken out the aspprotect access driver option.

The dataconn_inc.asp line reads as

ConnectionString = "DBQ=D:\missourirealtor.org\members\aspprotect\data\database \ASPProtect_access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

Now this should make it DNS-less correct? with the permissions set properly?

I've also taken out the password on the access database.

The original database of users I had was an access database from a different program called spooky login.  I exported them into a tab delimited file and changed the column headings to match those in aspprotect exactly.  Actually access would not let me import them in the databases without them being exact.

I imported that information directly using access's import options.  I tried the import/export manager in aspprotect but kept timing out as well.

Hi,

I don't see any good reason to rename any of those files.

Changing them though may involve changes to the code recompiling, etc etc... it is not something I support.

IMPORTANT UPDATE - READ THIS
http://support.cjwsoft.com/forum/forum_posts.asp?TID=205& ; ; ; ; ; ; ; ; ; ; ;PN=1

The 2Checkout Support Pack which is built in to ASPProtect 7 contains all the pre-built scripts you need to implement 2Checkout Payments with ASPProtect. You must be using version 2 of the 2checkout system. They are phasing out version 1 regardless so everyone will be using version 2 very soon if they are not already.

THIS IS NOT INTENDED OR DESIGNED TO USE 2CHECKOUT SUBSCRIPTIONS. (see bottom of this thread for more info on that)

This Support Pack basically gives you an additional signup and registration directory "2checkout_signup" and it should not interfere with any changes or customizations you have made to your ASPProtect setup in general. New users can register in this directory and pay for membership at the same time. Existing users whether active or expired can be sent to this directory where they can lookup their account and buy additional membership time online. You can also assign various Access and Group Levels during signup and you can set up various prices for various amounts of time as well. This is a real-time setup for the most part. As soon as a user pays via 2Checkout your system is updated and they will have access.

The 2checkout pack is NEW.. and was released on March 19, 2005. If you don't have it and would like it please just ask.

To start using this edit the "2checkout_signup/2checkout_config_inc.asp" file

You will be entering your 2Checkout Account number in that file as well as the URL you want a user to go to after payment. It is all commented in that file. (There is also a testing variable you can set to True if you want to do testing without real charges being applied)

After editing that file run this page.

http://www.mysite.com/2checkout_signup/show_postback_path.asp

Replacing the part in blue with your website info.

It will report back that postback url you need to use in the 2checkout system.

Log into your 2checkout version 2 account and under the "look & feel section" enter that postback url for both the "Approved URL" and the  "Pending URL"

Trust me: You want the URL there for a pending URL because the 2Checkout system is quite random and 95% of the payments that come in go to the pending URL and end up being legitimate sales. (at least for me they do)

Now make sure the Direct Return option on that page is on as well. 

If set to Yes buyers will be immediately directed to your URLs below once they click the Complete Order button. If set to No the buyers will have to click a button to return to your URLs below.

Save that page... and leave 2checkout.

Now, delete this page from your ASPProtect setup.
http://www.mysite.com/2checkout_signup/show_postback_path.asp

It's a minor security risk and is no longer needed needed.

The basic setup is finished. All you have to now is set up payments options the way you want them.


Changing Payment Options

In the "2checkout1.asp" file there are form options set up.

They look like this and you can have as many as you like.

<option selected value="30,9.95,3,">30 Days, 9.95</option>

In this option... A user has the option to purchase 30 days for $9.95 and he will be set to Access Level 3 when payment in completed.

Here is how it works.

The value setting (red) is essentially and array that can be made up 4 elements separated by comma's
They must be separated by a comma and there can be no spaces. In this example the 4th value was not used but the last comma must still be there. If you didn't want to set an access level and left out the "3" there would 2 commas at the end.  etc etc
Basically there must always be 3 commas but you only have to set the 1st 2 values which are days and price.

days,price,access level,groups

The 1st value is the amount of days.
The 2nd value is the price for the amount of days.
The 3rd value is the access level you want to user assigned to.
The 4th option is the groups you want the user assigned to. (see PayPal subscription thread for examples of specifying group info)

Now, the label for the option in (blue) can say whatever you like.

ok, I moved this thread..

The code in the ASP application handles all encryption and un-encrpytion of passwords in the database. I uses the vbscript RC4 function and the password encryption key specific to your installation to do this.

The whole idea is that if someone gets your database and opens it up that they will not get the passwords (utilitiies to crack access databases are common and work well so they can easily get by the main password)

That being said when you open the database manually your not supposed to see clear text passwords. Your also not supposed to have an easy way to make them clear text. It's a security thing. 

Though I am not officially supporting it I will tell you what I think would be the easisest way to make an export file with clear text passwords in it.

Use the export fire creator in the admin area of aspprotect.
Mosdify "export.asp"

change

Password = CmdDataExport("Password")

to

Password = RC4(CmdDataExport("Password"), PasswordEncryptionKey)

Then make an export file and see if that worked.
you can then import the export file into and access database or do whatever you like with it.

Hi,

I can't seem to find the code where it limits the upload file size. I want to limit the upload size to 1.5 mg for all users. Also I've noticed that the 500 pix doesn't seem to work. As in if an image is bigger than 500 pix the script still uploads it. i am using Upload_post_VBSCRIPT.ASP.

Thanks

It almost seems like allow images is denied.  When I look at the ad it doesn't even show a place where the thumbnail or image would go:

Columns now are Ad Name/ Price / Expires / Hits

There used to be one before Ad Name.

Even unchecked (saved) and checked

Use_Picture_Upload

< = value=True name=Use_Picture_Upload> Check this if you will be using the picture uploading feature.

If you are using an ACCESS Database try to avoid using a system DSN. They are much slower because they go through ODBC which then uses the Jet Drivers to access the database. They also have to do a registry lookup.

ttp://www.4guysfromrolla.com/webtech/070399-1.shtml

http://www.powerasp.com/content/database/dsn_vs_dnsless.asp



It's funny because in the 4guys article they ask the question..

"Hmmmm... so who was right, Microsoft or Wrox?"

I'll tell you who was right and who said it 1st.  It was me and I said it on my old powerasp.com site before anyone else ever did.

I found it out on my own by experimenting when I was the Systems Analyst for an large ISP. We we had web servers that were not running well. I didn't read about this solution anywhere because no one was talking about it at the time. Microsoft said use System DSN's so everyone just took their word for it.

I took a lot of heat for saying that back in the day but over time everyone started saying it.

I have noticed that during the file import, that some of the pictures get messed up.  I can import aroun 150 pictures into different albums, say 3 albums with 50 each.

I have noticed however that some of the get messed up.  What is happening is...the thumbnail will be correct, but after you click it the picture that shows up is one form a different album.

Any cure for this?

Parent Paths ?

http://support.cjwsoft.com/forum/forum_posts.asp?TID=5&P N=1

Testing for XML Parser Support

the microsoft xml parser is generally installed by default on all new server setups..

It allows ASP code to make calls to other pages anywhere on the new as well as a lot of other handy things..

download and run this ".asp" page to verfiy that it is installed and be sure it is available for you to use

2004-12-10_132620_test_xmlparser.zip

Make sure you run it from your web server through the web browser

BTW.. I dont know what is going on But I keep getting all these returned emails. My forum is sending you emails and they are coming back as undeliverable saying your storage space is exceeded on your server.

I'm all set - after thinking about your replies - i checked a bit more and changed the email component type -- thanks again for all your help.

I checked through the code and could not find anything as well. 

However, I do think it may be related somehow to the code as I get the messages popping up in the error log only after I have edited a banner.

If there is nothing obvious, I may just set my error log to filter and automatically delete this type of error.  Not something I prefer to do.

Thanks for the quick response.

Otherwise the program is working very well and I'm happy with it.

I have been having some display issues with the .NET version of ASPBanner.  I set the size of the image, and I set the size of the banner and there is still white space above and below the image.  I am not using a text link below the banner, so I have it set to blank.

Here is a link to my page. 

http://www.nababaseball.com

Two of the three banners in the rotation on the main page have non-white backgrounds so it's easy to see the issue I'm talking about.

Is there a way to tighten up the formatting so that the image fits onto the page in the size specified?

JDooley

Well Chris:

I logged off too soon after your last response. Your last idea was the answer. I am running McAfee as my virus-scanner on the mail server I am running. There was a script inhibitor enabled as a worm detection function. When I disabled it, your software responded correctly. I guess I can do without that, although with everything thrown at the net these days, it makes me a little nervous.

Thanks

Is there a way to protect other virtual sites on the server that are not under the default web site considering people may have different websites running off one server?  I get the following error:

Parser Error Message: Cannot use a leading .. to exit above the top directory.

Source Error:

Line 1: <%@ Register TagPrefix="aspprotect" TagName="checkaccess" Src="../../protectpage.ascx" %> Line 2: <aspprotect:checkaccess level="4" groups="null" runat="server"></aspprotect:checkaccess> Line 3:

Thanks!