- I am using the original files that came with the software.
- The software ads items to the database flawlessly.
- ASPImage works great.

- When I try to remove an ad or an image it says it's been removed.
- The ad does not show up on the site anymore.
- BUT, when looking at the sql database the ad is still listed there.

Why is the software not deleting the columns from the database and the images from folder?

Note: My other tables for other projects, in the database, allow me to delete them.

I did the initial steps of downloading the sql scripts and running it in Query Analyser, tables created fine.

I can login for the first time. I exit from the browser and then I cannot login again. This happens for every user and admin.
I noticed that the values in the fields "Login_limit" and "Active" in the ASPP_Users table in the SQL changed to NULL and 0 when login and remained in those values after close the browser.

So iam just struck not able to log in. Pls advice.

The parent paths things really should not be an issue.

This is an article from the troubleshooting section of the documentation that takes care of it all very easily.

http://support.cjwsoft.com/code/moreinfo162-1.htm


As for a good host that knows ASP and does not mess around when you ask for something. I always recommened www.alentus.com

I get this error, Any ideas?

Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC Microsoft Access Driver] '(unknown)' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.

/guestbook/save.asp, line 109

Hello,

Thank you for the feedback.

I would like to point out the requirements of the application however as this is something I am aware of and do address.

http://support.cjwsoft.com/code/moreinfo165-1.htm

These requirments are directly linked to from the ASPProtect v7 web page, so its not like I dont try to tell people the deal regarding SQL server.

Basically I only have the resources to provide scipts and instructions for using SQL Enterprise Manager and that is all I officially support. I also personally think anyone using a SQL Server should be using SQL Enterprise Manager because later on down the road there are things you may want to do such as backups/etc etc

Take Care,

Chris Williams
www.CJWSoft.com

... doesn't seem to be working on my site. I expect I did something wrong.

I've created some groups, "week", "month", and "year". Their IDS are 6, 5, and 4, respectivelty. When someone goes through the PayPal signup, he's assigned to one of those groups based on his subscription.

When I see a new subscriber and check the relevant group the person's supposed to be in, that person's not in that group. I'm adding them manually for now, but I'd sure like a solution for when I go to sleep...

My subscription code looks like this:

input type="hidden" name="custom" value="5,*4*,<% =User_ID %>

One-off code looks like this:

option selected value="7,4.95,1,*6*"

I've created the groups in my management console. Is there anywhere or anything else I'm missing?

do you have the smtp part of iis installed on your machine

cdonts needs that

then again I am not sure you can even use cdonts on a xp box without making some changes...

cdonts has kinds died out and as of windows 2000 basically got replaces by cdosys

Hi all,

I have the photo gallery set up at www.kashabowieoutposts.com/gallery

It's great - love to work with it.

But I've never been able to get those with just User permissions to be able to upload... Only an administrator is successful in uploading.  This was no problem in the past, but now this client would like to give their guests a means to share their pictures on their site - so now I have to figure out the bug...

... this is the error I keep getting...

Your upload did not succeed, most likely because your browser does not support Upload via this mechanism.

Your browser must support a standard called RFC 1867. Please check with your browser vendor for support of this standard.

------- anyone else experienced this?

Many thanks all!!

Doug

I believe I'm having trouble with Domain masking in that it appears to affect the ASP Photo Gallery login screen.

My address is forwarded and masked by my domain "company" (in this case: Godaddy.com). It is forwarded to a Win2000 Server running at my static home IP.

From outside of my network, the website appears to work fine...even the default.asp page works to the point of the login page. After entering a login and password - you hit the login button and the page simply reloads only with all of the header and footer information removed.

I found that by eliminating the domain masking feature at the domain company, the problem gets eliminated and the entrie site works fine.

Has anyone else run into this problem? I'm guessing it's the way the domain name is held in the browser cache but I'm not sure how to resolve it so that the ASPPhotoGallery scripts and pointers work correctly.

Eric

Thanks, I really appreciate you working on this. The software works GREAT and the support you give can't be beat. I will definately tell other that are looking for software for their sites to check your first.

one more question.

To use the bulk upload feature of aspuload, do I just need to add another upload section to the same upload page, that will allow more than one file to be selected then tell it to put the files in as Photo 1, 2, 3 etc.? I am a rookie at ASP but I think this is possible and with a little research I should be able to get it going.

Just want to make sure I am on the right track.

Thanks

Hello,

 I need some help with the following code. Please look at the area in red. I need to be able to set someting up to where the variable eval1 (a yes/no field in my database) is set to false after the associated link is pressed.

Thank you

="vbscript" %>
<!--#INCLUDE virtual="/irp/check_user_inc.asp"-->
<html>

<head>
<title>Administrator Evaluations</title>
<style>
<!--
 div.MsoNormal
 {mso-style-parent:"";
 margin-bottom:.0001pt;
 font-size:12.0pt;
 font-family:"Times New Roman";
 margin-left:0in; margin-right:0in; margin-top:0in}
-->
</style>
</head>

<body background="../images/1.gif" bgcolor="#C0B59A" vlink="#FF0000" alink="#FF0000" link="#0000FF">

<p><map name="FPMap1">
<area href="http://www.utb.edu/" shape="rect" coords="627, 66, 670, 81"></map>
<span lang="en-us">&nbsp;&nbsp;&nbsp;&nbsp;& ; ; ; ;nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;& ; ; ; ;nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;& ; ; ; ;nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;& ; ; ; ;nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;& ; ; ; ;nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;& ; ; ; ;nbsp;
</span>
<img border="0" src="https://blue.utb.edu/irp/Inst-Research&Plan.jpg" usemap="#FPMap1" width="675" height="82"><br>
&nbsp;</p>
<h2 align="center"><span lang="en-us">Administrator Evaluations</span></h2>
<p align="center">&nbsp;</p>
<p align="left"><span lang="en-us">&nbsp;<b>Welcome,&nbsp; </b>  </span> <b> <% Response.Write(Session("FIRST_NAME")) %>
</b>
</p>
<p align="left"><b><span lang="en-us">On this page, you will see a list of names
that represent the persons that you will be evaluating this year.
Please click on a name to select that persons evaluation form. Once you have completed
and submitted that persons evaluation, you will be returned back to this page to
continue with the next person on your list. Once you have completed all your
evaluations, you can log off the system using the link below.</span></b></p>
<p align="left"><b><span lang="en-us">Please note: Only <u>1</u> submission per
person will be accepted, any additional submissions will not be accepted.</span></b></p>
<p align="left"><span lang="en-us"><b>If you have any questions please feel free
to contact us at the number below.</b></span></p>
<hr color="#FF9933" width="80%" size="3">
<p align="center"><span lang="en-us"><b>Please click on a name below to begin
the evaluation process.</b></span></p>
<div align="center">
<table>
         
       <%If Session("Link1_Name") <> "" Then %>
    <table border="1" width="28%" id="table1" bordercolor="#000080">
  <tr><td bgcolor="#FFFFCC" style="float: left">&nbsp;  <b><span lang="en-us">&nbsp;<a href="https://<% Response.Write(Session("Link1"))%>" onclick="<%=Session("eval1")="true"%>;return true" </href>  <font color="#000000"><span style="text-decoration: none"><%Response.Write(Session("Link1_Name"))%>< /span></font></a></span> </td>
  </tr>
  <%End If%>  
       
   
  <%If Session("Link2_Name") <> "" Then %>
  <table border="1" width="28%" id="table1" bordercolor="#000080">
  <tr>
  <td bgcolor="#FFFFCC" style="float: left">&nbsp;  <b><span lang="en-us">&nbsp;<a href="https://<% Response.Write(Session("Link2"))%>" </href><font color="#000000"><span style="text-decoration: none"><%Response.Write(Session("Link2_Name"))%>< /span></font></a></span></td>
  </tr>
  <%End If%>
 
  
  
  <%If Session("Link3_Name") <> "" Then %>
        <table border="1" width="28%" id="table1" bordercolor="#000080">
  <tr>
   <td bgcolor="#FFFFCC" style="float: left">&nbsp;  <b><span lang="en-us">&nbsp;<a href="https://<% Response.Write(Session("Link3"))%>" </href><font color="#000000"><span style="text-decoration: none"><%Response.Write(Session("Link3_Name"))%>< /span></font></a></span></td>
  </tr>
  <%End If%>
  
 
POST EDITED / SOME CODE REMOVED TO KEEP IT SHORTER .. 
This went to Link3_Name    
    
 
</table>
<p>&nbsp;</p>
<p><span lang="en-us"><b>If you have completed all your evaluations and wish to
log out please click <a href="log_off.asp">here.</a></b></span> </p>
<p>&nbsp;</div>
<div class="MsoNormal" align="center" style="text-align:center">
 <hr size="3" width="80%" noshade color="#ff9933" align="center"></div>
<p align="center" style="text-align:center"><b>Institutional Research and Planning
<br>
Tandy 270<br>
80 Fort Brown<br>
Brownsville, TX 78520</b></p>
<p align="center" style="text-align:center"><b>Phone: 956-544-8816&nbsp;&nbsp;&nbsp;&nbsp;&nbs p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbs p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
Fax: 956-983-7652<br>
E-Mail:
<a style="color: blue; text-decoration: underline; text-underline: single" href="mailto:iresearch@utb.edu?subject=Administrators%20Evaluation">
iresearch@utb.edu</a></b></p>

ok, here is what is going on

you are password protecting an ".asp" page that requires querystring info to run correctly   (example - "somepage.asp?ID=3"")

that is something I never intended anyone to do.. while it does handle and repass the querystring info along during successful login it does not re-pass that info during a failed login as you have found out

this is all by design.. the only reason the system re-passes the querystring info at all is because I wanted to make it smart for the sake of the remember me/cookie feature.. so if someone was using that and bookmarked a page deep in your site with querstring info...then when they went back to that bookmark they would get authenticated and still see the page as intended with the querystring info in tact

it was a nice feature never intended to handle any situations other than what I just described...

now...
notice the url in the browser after failing a login.. then logging in successfully.. it is missing the querystring info

that more than anything is what is going on..  browser caching can cause some confusion when dealing with this because the browser likes to return you to the page minus the querstring info... when that happens a simple browser refresh at that time may very well solve the problem and then you see the page you are supposed to see...

To avoid all of this...

One solution to this is to always start people logging in to an ".asp" page that has no querystring info. That way this won't happen. Once they are logged in you can then offer them links to the pages they need to go to. (you of course still want to password protect those pages)

Another solution is to log them into a page with no querystring info and then do a response.redirect to the page with quersytring info.. thus accomplishing the same thing but without the possibility of the issue because of a failed login.

Another solutions is to do checks in your asp page for missing querstring info.. and if it isn't there do something about it like send them somewhere else.. or display a message about there being an error... etc etc

So,basically you don't want to tell people to login into such and such page with querstring info... and providing a username and password..... You can do it but like you found out it can cause an error if they mess up logging in the 1st time. The system just was not designed to handle that. There are complex reasons for that involving security that would just take me too long to explain.

I hope this makes some sense to you.. it is very hard to try and explain

IT worked just as cwilliams said. I did see the IP address being stored in the table but it didn't dawn on me that it was tied in to the view count, I tried it from a different IP address and it worked great .

Good coding Christopher

Thanks

John

Why all the pages at the directory .../password_admin/ are very slow to open online?

Your going to have a lot of problems and a lot of the code will have to be re-written.

There are a lot of things in the the code that the MYSQL database system does not support or has issues with . I know because I once made a version of ASPBanner work with MYSQL and it took weeks of work to get it stable.

Null field types can cause problems... but mostly ADO updates which I don't think MYSQL supports at all. All of the ADO stuff would have have to be rewritten.. etc etc

That's probably why you cant get much of the code to write to the database.


Here is a generic example.

An update to an existing record using ADO
http://www.powerasp.com/content/database/ado_update.asp

And update to an existing record using an update query.
http://www.powerasp.com/content/database/using_update.asp

All through the the code the ADO updates would have to converted to update queries which means a lot of work.

I used ADO a lot because I like it and it is little easier to validate data before it is written to the database.

It is also a little easier for customers to understand when they look at the code.

Anyway....

The app just was not designed to work with MYSQL.
It was specifically designed to work with MSSQL and MSACCESS only.

This holds true for all of our applications.

Your running off an IIS 5 Server so I would suggest just using MSACCESS as the database. The Photo Gallery app will run very well using MSACCESS. 

How to bring up Banner Calling Code Generators

Simply go to the zones screen.
Select a Zone from the list.
Check the "Show Banner Code" option.

Click on "Display Banners in Selected Zone"

lmao ... ya that has never happend to me before....

Below is the email I received when testing the self-registration. Does anyone know what setting I configured incorrectly?

I received the email to confirm the registration but the link to activate is invalied.

Thanks!

Your registration still has to be validated.
Go to
?u=bubbaj&v=4579
to verify your registration.

Thought that was already done....

Back to the drawing board...

UPDATE:  read whole thread..
Version has been delayed




These are my personal notes on the new version of ASP Photo Gallery that should be out sometime in May/June 2004. Please ingore any typos.

This version may be more expensive than the current pro version as this is a major re-write and there will be a ton of new features.

Regardless, special pricing will be offerered to existing users.

If you see any features not listed that you think would be nice please post them here. We will of course consider them.

ASP Photo Gallery Version 4

------------------------------------------------------------ --------------------------------------------

Finished Improvements:

new setup page makes setting up the data connection easier than ever
it attempts to determine the possible data paths and makes suggestions for what to try
when you finally get the data connection working it gives you a link to the admin area of the application
so you can get started using the application

all database table names can be specified in the config_inc.asp file for advanced users that they may need
to change the table names in the database.. helpful for sql installation where one sql database must be
shared by many applications

new data folder is the only folder that needs permissions set
before multiple folders needed permissions
now everything can be put in this folder... database,logfiles,configuration files,picture upload folders...
eventually all cjwsoft applications will do this allowing multiple cjwsoft applications to use that same folder
therefore making it easier than ever to setup more applications without asking your host to set more permissions

new text based config file makes it easier to add new options to the program without making changes to
the database structure... therefore the need for the configuration table in the database has been eliminated
this also reduces system resources needed to load the config data for each page because it eliminates calls to the
database for config data

added voice effects for data connection page, intro users page, and settings page

made it so ratings color was an option (red or blue)

fixed minor bug that wasn't showing fixed category heights when that was selected and am image wasn't originally sized that way during initial upload

changed logfiles dates so they always show up in the proper order 09 vs 9

added config option to change bit query value to 1 or -1
default it to 1.... this is a technical thing

added the extra options currently in the config file to the settings page so people do not have to manually edit that
file any longer...

added new persits email option and authentication options to the settings page

added new CDOSYS emailing option

added support for dundas emailer

added support for ASPSMARTMAIL

fixed word filter so if it is empty it doesn't mess up
also make editing it part of the main settings

made email functions include file and edited all page that email to use it

added css/style sheet support and removed a lot of the old font tags

seperated the settings page into sections because it was too big and confusing

added ability for text watermarking when using the ASPImage component

made the picture upload error message no longer mention browsers that do not support picture uploading
as that is confusing people... and the problem is never that anymore

Made the ASPImage test page delete the bar graph before creating it so if it is already there they will
not think it is working

added crystal ball feature to admin users screen... shows additional user info when you hold the mouse over it

Made search function highlight search word in results.
Made the search function search the image description text files as well

Eliminated the guestbook directory as there was no need for the guestbook to be in it's own directory. This also simplified the menu.asp file as the guestbook section could be removed.

------------------------------------------------------------ --------------------------------------------

Possible Improvements:

eventually make new and much better directions/documentation... html based for multiple reasons

Eliminate the need for parent paths to be enabled on the web server.
(THIS MAY NOT BE POSSIBLE)
Many hosting companies disabled parent paths and will not enable them for their users.
On Windows 2003 Server Parent Paths are disabled by default.

make it so users ability to upload pics can be optionally disabled

possibly make some of the special functions in the extras folder built in to the admin area

Make the category picture uploader smarter because of the jpg gif issue when reuploading cat icons
A jpg loaded over a gif.. doesn't delete the old gif graphic and vice versa

Reduce number of ".asp" pages in general.

Use more functions for redundant tasks.

Optimize all instances of the old filefound function which is using more resources than are necessary

option.explicit the entire application and get all the variables dimmed once and for all

possibly incorporate the new category system I am working on which allows for unlimited categories and levels
also simplifies the heck out of the pages that call the categories

possibly add some cool image manipulation functions such as rotation for the various image components supported

possibly add the ability to move pictures around in an album. and maybe between albums
I must also remember to move the ratings and desc as well for that image.

possibly add the ability to make individual pictures require approval

possibly add the streaming image ability (asp page called from image tag) I came up with as an option for
people that can use it. this will better secure images in password protected albums and also possibly make
it so images can only be viewed from certain urls.. and maybe make an interface for a list of allowed urls

improve the .net support to also resize the larger images.. currently it does not

possibly add a feature to store 3 versions of images uploaded
thumbnail, medium res, and high res/original
this will appeal to professionals or people that may want to sell prints
storing a large version will be optional

possible support for multimedia content other than gif and jpg images

fix... url to link to..   problem on control pics page when both a jpg and a gif are present... which also relates to a another slight
bug that needs to be taken care of

make interface in admin to listen to installed midi files
and also to upload / delete them

possibly make per album guestbook... or call it something else like disussion or comments

add option to store the images orginal name in the images description area during upload
may be helpful to people that name their images in a somewhat descriptive way

change approval settings so they work on a per user basis
eliminate access levels from edit user screen and get rid of the level 4 stuff mentioned
possibly add a per user option for individual pic approval as well if I get that feature implemented

add support for the ibulc bulk upload client that I recently discovered
it is very cool

Understood.... can you point me to a place where there are other methods of calling banners?  Do you mean not use Flash?  I am new to this and will need some pushing over the cliff!

Thanks

Dave

Is there a limit to how many access levels the program has?  We were thinking of having a different access level for each client that logs on our site so we can customize their web experience.  We see 6 in one place of the program, 8 in another, but is there any reason why we couldn't make 100 more?

Thanks again for the help!

Well I have the web hosting tech looking into the memory issues at this point.  Unfortunately I don't have another machine to be able to run the asp on that would run it correctly so that I can just publish it over.

DONE IT

DON'T WORRY!

DON'T ASK HOW, BUT NOW IT WORKS!!

THANK YOU IF IT WAS YOU, OR THANK YOU GOD IF IT WAS ME!!!