Hallo,

What do I have to do for inserting around 6,000 new users?

I have all my user in an access file. I don't know the password of access database files. The same problem with the "aspprotect upgrade pack".

Sorry for my English

I'd say that the vendor is right so I've submitted a work order to
create the *****.com/aspnetprotect directory as an application.
If there are any other directories for which this needs to be done,
please let us know. This particular task always needs to be performed
by our staff.


If you need to follow up on this job with one of our on-line or phone
technicians, you can reference ticket id 11860.

With regards

ok.. Chris.. I am now kicking myself in the butt.  In the setting section, I had to redirect certain urls and directories to the right spot.  I forgot that I renamed the root folder. 

Thank you, thus far for your continued help.  It is greatly appreciate.

Hi,

I did some layout customizing on the register page on my site. ( http://www.lonestaricon.com/aspprotect/paypal_sub_signup/reg ister.asp)

Now when I tried to register, it seems like it goes to the next page, but it is blank.
( http://www.lonestaricon.com/aspprotect/paypal_sub_signup/add _new_account.asp)

If I log in under administration, it shows that I have registered. I can't seem to figure out what part of the code is wrong, so that the new account page will not load.

I'd would greatly appreciate any help with this.

Thanks,

Allison

If you need to know how to enable them on your test server.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=5&P N=1

It's custimization work. and just not something I can support.
Basically it is basic ASP/Database work.

Something you kind of need to figure out on your own. It's not difficult work for a good asp coder but there is no easy way and it is time comsuming.

I wouldn't use the custom fields though. I would make your own.
It's simpler that way.

Chris,

I've given the IUSR account modify access for the aspprotect folder.

In the ODBC manager module on the webserver I've taken out the aspprotect access driver option.

The dataconn_inc.asp line reads as

ConnectionString = "DBQ=D:\missourirealtor.org\members\aspprotect\data\database \ASPProtect_access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

Now this should make it DNS-less correct? with the permissions set properly?

I've also taken out the password on the access database.

The original database of users I had was an access database from a different program called spooky login.  I exported them into a tab delimited file and changed the column headings to match those in aspprotect exactly.  Actually access would not let me import them in the databases without them being exact.

I imported that information directly using access's import options.  I tried the import/export manager in aspprotect but kept timing out as well.

No rush, I have it out on the internet, but have not gone live with the site yet.

Thanks for responding,

Enjoy your well deserved break

whether you use SSL or not really does not effect aspprotect in any way

I say, the smart thing to do there is too not start them off at a http:// url

one way to do it is put a simple ASP redirect on that default page and send them to an SSL version of the page instead...

http://www.powerasp.com/content/code-snippets/redirects.asp

another way would be not start them off on a protected page right off the bat and offer links to the the protected area...

in my opinion thats pretty odd to be starting them off on a protected page anyway
SLL maybe, but protected right from the time they hit the default page of the site.. thats just odd.. usually you want o say a little something about the site your at and then link people to protected areas or give them a login form which posts to a protected area.


Regardless if you always want users at your site under https:// you should have code on every single page in your site checking the url info at every page load. Then if someone ever hits a page and is not using the https://  you can do something about it like redirect them to the SSL home poge or redirect to that same page but with the https:// in the url..

Hi -

We are trying to set up ASPProtect 7 so that the user is redirected to a specific web page based on their group membership.

For example, immediately upon successful login:

Group 1 members are directed to page A
Group 2 members are directed to page B
Group 3 members are directed to page C

Users will only ever belong to one group.

We tried to use the Redirect_URL feature but it causes the browser to loop.

Could you let us know exactly how to do this.  We are not ASP programmers and need to work from an example.

Thanks!

I dont know about the unspecified errors. I really need more detailed information. (Since it has been working fine for quite a long time you might want to consider installaing the application from scracth again and see if you still get errors)

As for the log in not persiting. Did you by chance turn off cookies in your browser ? They are required for forms based authentication to function. Otherwise, yes you would need to log in to each and every page as you moved around.

I have imported like 50,000 users into an access database when testing... it took like 4-5 minutes but worked..

course it really all depends on the setup how many you can get away with

something must still be wrong

have you tried just importing 1 or 2 users for troubleshooting sake ?

I would also recommend that after any timeout you reboot the server or at the very least do an "iisreset" to get things back to normal

When I add a user, I can not activat it.

It sends me back to log on and will now allow me to log in as admin???

I can restart the APP and log in as Admin, but the user I added

is still not activated??

My system will also not allow me to set the Stay Loged in FLag.

It just ignores it....

I am using v7 with other software written in ASP.NET. When I include the the "checkfor" and include file, I'm receiving a compliation error.

Here is the include I have on the .aspx file:
<% CHECKFOR = "4" %>
<!--#INCLUDE FILE="../../ASPProtect/check_user_inc.asp"-->

Here is the error:

The Double DIM needs to be removed for this code to work properly.

<%
Dim BannerZone, BannerConnectionString, BannerDatabaseType, ConnBannerSystem
Dim CmdCheckUser, CmdGetConfiguration, App_Name, Config_SQL, BodyTag, BanDataConn
Dim CmdBannerTemp, CmdGetZones, ZoneString, ZoneArray, ZoneIndex, CmdUpdateWaiting
Dim CmdUpdateExpired, CmdRetrieveImpLimitedAds, CmdRetrieveImpressions
Dim CmdUpdateImpHit, CmdRetrieveAds, CycleBannerTotal, CycleList, NewCycleList
Dim Dim LoopBanner, CycleLoop, CycleListArray, CycleListArrayIndex, BannerCycleData
Dim Banner_Array, CurrentBanner, NewCycleListArray, Banner_Array2, LocationIndex
Dim Stop_Processing, Keep_Processing, CmdUpdateStats
%>

I just took a look and that is definetly what happened.
It has nothing to do with the registration process as far as I can see.

Just running this page triggers it and I know it does not do that the way it comes.
http://www.myvirtualtutor.com/aspprotect/users/user_area.asp

Please back up what you changed and put the user area back the way it came..

If error still happens then I can help you.. It it works fine with the default files from the zip archive then you messed something up in the code.

You have to be really careful when working with ASP code.

Also: just in case you did this. " you should not be password protecting any files in the users area that are already there " the users area does it's own thing and there is no reason to be doing anything like that to the files that are already there. You can do whatever you like to files you add on your own.

Please forgive any ignorance on my part.

Using the live demo, it seems that with the banner software my advertisers would only have access to reports, but no ability to upload banners, specify keyword triggers or zones, what have you. Is this correct?

The other thing I couldn't quite figure out, assuming I had a categorized directory on my site, is this system configurable to display different banners based on category? Perhaps through keyword triggers?

Thank you in advance for any assistance.

I apologize if I've missed this, but I would love to see the ability to auto-e-mail the advertiser at some randomly set interval before the banner expires. Ideally, I would also be cc'd on this e-mail so I can stay in touch. If the advertiser wants to renew, I can receive payment and change the expiration date without their banner ever falling out of service.

Since e-mail is already built into the program, would it be difficult to add a routine that checks for expiring banners at some daily interval, and contacts the advertiser?

To get really fancy, the e-mail could include the ability for me to add a button for paypal, allowing the advertiser to easily click and send off another payment.

Best,

Wayne

All of the fields with the expected paths show the correct file structure, so now I've put them in them in the boxes

sorry your having so much trouble. A good host is a must.

Yes, that is most likely permissions related.
http://support.cjwsoft.com/code/moreinfo27-1.htm

You may want to read over my article on how permissions are set. It will give you a very good understanding of the process and may help yo when dealing with your hosting company.

http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

there is also an xp pro version of the article for people doing locl development and running iis on their xp box
http://www.powerasp.com/content/new/windows_xp_pro_and_permi ssions.asp

You are right, there are NO entries in the "PayPal_Subscriber_ID" field at all. Any way of fixing this?

Not really.  The way I thought activity would work is that I would always see the last 50 users.  Not sure what controls that and why I wasn't seeing it, but it sounds like it is an IIS thing and since my site is not all that busy, it will not show the users if some process has reset the numbers.  Not a big deal.

As for the log files, I think it is related to my other question regarding the export directory.  I have the ISP looking into things at thier end to see if they are doing anything that could cause the directories to disappear.

Thanks,

Dave

It probably is. You would have to look at the paypal documentation for IPN and see what needs to be changed in the form code.

You can get all that info from PayPal's website.

There are tons of variables and options you can use with all of their code.
They have detailed PDF files full of information on all of them.

Regarding (ASP Photo Gallery Pro)

If you are looking to import a very, very, large number of images, the upload feature might not be sufficient for you. I have done some work using a unix terminal to be able to upload as many images as I would like by simply placing the images in the directory and renaming the images. There are other ways to rename the images, but I am very familiar with Linux, so I chose to do it this way. If you are running Linux, MacOS, or another Linux-based OS, you can simply pull up a terminal and run the following command in the appropriate directory. If you run Windows, I'd suggest CygWin, which creates a Linuxenvironment (Linux shell). It can be found at www.cygwin.com In order to be recognized by the ASP software, the images must be in the format of pic_"Album Number"_"Picture Number".jpg . Therefore, the following code is run to accomplish the file name change (on one line without wordwrap):

ls -1 DSC* |
sed 's/DSCN//g'
sed 's/.JPG//g' |
awk '{print "mv DSCN"$1".JPG pic_9_"$1".jpg"}'
This command will change all files beginning in "DSCN" to "pic_9_*Picture Number*".

This does have a slight problem however. If there is a large number of pictures, 0's become a problem. For example, if there are 200 pictures, picture 1 will show up as pic_9_001.jpg. This can be fixed by the following command, which will eliminate unneccesary 0's (All on one line once more):

ls -1 --color='never' pic_9_0*
|sed 's/_0/_/g'
|sed 's/pic_9_//g'
|sed 's/.jpg//g'
|awk '{print "mv pic_9_0"$1".JPG pic_9_"$1".JPG"}'

This command eliminates 1 zero. It should be run as many times as needed to eliminate all zero's.

Please Note: These commands will only show the resultant set (The list of picture names). In order to execute them, they must be output to a shell script using the ">" character as follows:

ls -1 DSC* |
sed 's/DSCN//g'
sed 's/.JPG//g' |
awk '{print "mv DSCN"$1".JPG pic_9_"$1".jpg"}' > temp.sh

Then, the shell script must be run using the following command:

sh temp.sh

This might take a few moments, depending on the amount of picture names that are being changed.

IMPORTANT: BACK UP all files before changing file names. Also, view the resultant sets to make sure it's what you want before outputting to a shell script.

If you have any questions, please feel free to post or e-mail me @ JPortnoy@checkernet.com

My ISP uses ASPSmartMail. The email confirmation works except when I try to register an AOL user the server returns an error 500.

Hello,

You are correct regarding what you noticed.. ASPBanner only allows one person to administrate. If if did what you are asking about it would probably cost more.
(you get the ASP source so if you really wanted that you could always add it on your own fairly easily, but it all depends on your skills)

AS for keyword advertising and different ads based on certain pages ASPBanner does not get into that. The main reason being performance as I built ASPBanner primarily as a performance banner rotation solution.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=144& ; ; ; ; ;PN=1

Like that thread says, you could make different zones for different conditions.. then surround the banner calling code with if else logic so a different banner zone was called under certain conditions.

Regardless, if you really need something that has every bell and whistle. BanManPro is where it is at.

do you have the smtp part of iis installed on your machine

cdonts needs that

then again I am not sure you can even use cdonts on a xp box without making some changes...

cdonts has kinds died out and as of windows 2000 basically got replaces by cdosys