Additional Information.

A set of these variables get created for every user that logs in to your site.
For performance and memory conservation reasons some of them can be turned off and are optional.

If you look in the "check_user_inc.asp" file or the "check_admin_inc.asp" file you will see a section of code like this


   ' Start of optional session variables to be set
   ' Recommended that you remark out any of the session variables below that you don't really need to use
   ' This will save a lot of server resource because every user logged in has a set of these
   
   ' I added some code here to not create these if they are empty
   If CmdCheckUser("First_Name") <> "" Then Session("First_Name") = CmdCheckUser("First_Name")
   If CmdCheckUser("Last_Name") <> "" Then Session("Last_Name") = CmdCheckUser("Last_Name")
   If CmdCheckUser("Company_Name") <> "" Then Session("Company_Name") = CmdCheckUser("Company_Name")
   If CmdCheckUser("Email") <> "" Then Session("Email") = CmdCheckUser("Email")
   If CmdCheckUser("Address") <> "" Then Session("Address") = CmdCheckUser("Address")
   If CmdCheckUser("City") <> "" Then Session("City") = CmdCheckUser("City")
   If CmdCheckUser("State_Province") <> "" Then Session("State_Province") = CmdCheckUser("State_Province")
   If CmdCheckUser("Zipcode_Postal_Code") <> "" Then Session("Zipcode_Postal_Code") = CmdCheckUser("Zipcode_Postal_Code")
   If CmdCheckUser("Phone") <> "" Then Session("Phone") = CmdCheckUser("Phone")
   If CmdCheckUser("Custom1") <> "" Then Session("Custom1") = CmdCheckUser("Custom1")
   If CmdCheckUser("Custom2") <> "" Then Session("Custom2") = CmdCheckUser("Custom2")
   If CmdCheckUser("Custom3") <> "" Then Session("Custom3") = CmdCheckUser("Custom3")
   If CmdCheckUser("Custom4") <> "" Then Session("Custom4") = CmdCheckUser("Custom4")
   If CmdCheckUser("Custom5") <> "" Then Session("Custom5") = CmdCheckUser("Custom5")
   If CmdCheckUser("Custom6") <> "" Then Session("Custom6") = CmdCheckUser("Custom6")
   
   ' End of optional session variables to be set

If you do not need a particular variable to be set as a session variable simply comment that line out with single quote.

If you have an extremely busy site with a lot of users this is a good idea. If not, you probably don't need to bother doing this. I added some code in there so they will not be created if they are empty and that alone helps out a lot.

I am converting the email over from CDONTS to CDO so it will run on my host 2003 server.

What files should I be concerned with?  Under gallery_admin there is an email_user.asp and  under the main gallery folder thier is an email friend. Is there an other email routines I should be concerned with?

Thank You for your Assistance.

Jeromy

Running in parallel for testing is actually a smart way to do it, but the truth is you don't use anything from version 6 except the upgraded database (we have a tutorial on how to upgrade the database)

Version 7 was a drastic change /rewrite to all of the asp files that come with the application. So you will be starting out with fresh version 7 ".asp" files and folders... You will also find that once you get version 7 running that editing certain things like the look of the users area and the login screens is much easier to do.

That being said any of your own ".asp" pages that you protect use the same protection code they always did, so there will be no drastic changes needed there when you do finalize the upgrade.



If using MSACCESS as the database I suggest installing the application somewhere in your web and using a fresh ASPProtect 7 database. Once you are familiar with the setup and everything is working fine. Attempt the database conversion and when your done stick your converted database in there and see if everything is ok.

Also, if you already purchased the application download the latest version before doing the install. It's the same download URL. If you don't have it email me and I can hook you up. I have added some new features and fixed a couple minor things since it's release.

So far the feedback on version 7 has been awesome..

Let me put it this way.

My home page (default.asp) is an unprotected page.

When a user that has signed in on another (protected pages) and has the remember me checkbox checked closes the browser cookies should be set for the next time they return.

When the user opens their browser and returns  to my home page (default.asp), I'd like to put a message saying:
Welcome back <%Session ("Username")%>

How is this done?

Adding Support For ServerObjects ASPMail

ASPProtect as you know does not support ServerObjects ASPMail component by default.

Here are directions to make it work.

In the ASPProtect admin settings area simply pretend as if you are using the softartisans sasmtp mailer component. ASPMail and that sasmtp component share the same properties… and the code used for them is nearly identical.

So search through the code for any place where email is sent and simply change

Set Mailer = Server.CreateObject("SoftArtisans.SMTPMail")

To

Set Mailer = Server.CreateObject("SMTPsvg.Mailer")

It is about 4 places. They are not too hard to find.

That’s the easy way to get all the emailing functions working with ASPMail

My ISP uses ASPSmartMail. The email confirmation works except when I try to register an AOL user the server returns an error 500.

ERROR [HY000] [Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: Microsoft.Data.Odbc.OdbcException: ERROR [HY000] [Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.

Source Error:

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

Stack Trace:

[OdbcException: ERROR [HY000] [Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.] Microsoft.Data.Odbc.OdbcConnection.HandleError(IntPtr hHandle, SQL_HANDLE hType, RETCODE retcode) +27 Microsoft.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandB ehavior behavior, String method) +838 Microsoft.Data.Odbc.OdbcCommand.ExecuteNonQuery() +80 aspprotectnet.aspprotectlogin.Login_Click(Object sender, EventArgs e) +2284 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +108 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEven tHandler.RaisePostBackEvent(String eventArgument) +57 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +18 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain() +1292

Version Information: Microsoft .NET Framework Version:1.1.4322.2300; ASP.NET Version:1.1.4322.2300

I am getting this error message when trying to log in as admin or registering a new user. I am using Windows Server 2003 and it is a DOMAIN CONTROLLER.

I have read that there is NO ASPNET account for a domain controller. In its place is the IIS_WPG account. I have given this account and the IUSR account FULL CONTROL.

STILL GETTING AN ERROR. ANY SUGGESTIONS???

It's not normal at all. My guess you accidently edited the code in a bad way.

(thats the same code the every guestbook in every application I sell uses including ASPGuest which gets downloaded for free about 50 times a day)

No one has ever said it acted funny.

I would do a default installation with the original code somewhere and see if the problem occurs. If it does I can take a look.

In the meantime I wouldn't be running that as it is probably using up massive processor time because of whatever is wrong with it. 

The parent paths things really should not be an issue.

This is an article from the troubleshooting section of the documentation that takes care of it all very easily.

http://support.cjwsoft.com/code/moreinfo162-1.htm


As for a good host that knows ASP and does not mess around when you ask for something. I always recommened www.alentus.com

you do not run "check_user_inc.asp" by itself

Pages you protect include that file at the top.. when they someone goes  to a protected page if not logged in a user then sees a login prompt..

after loggin in they see that same page as normal

its an automated process..

now, that being said if you really want to you a specify a page to be redirected to after the 1st login when you edit a users info. You can also redirect anyone anywhere like using a simple ASP redirect statement in your code.

Personally I feel that redirecting people all over the place is poor site design. ASP is all about dynamic code and ASPProtect is all about dynamically tailoring pages to the current logged in users... so why redirect people all over the place.. it justs complicates things because you still need to password protect the places you send them to.... which means twice the work and twice the confusion.


Also, here is a Version 6 thread about redirecting manually that still applies to version 7.

http://support.cjwsoft.com/code/moreinfo17-1.htm

Has anyone used the aspmail function to send and recieve emails from within your forms? If so what string did you use in the aspmail_host field in the connections database.

thank you
adam

Hi all,

I have the photo gallery set up at www.kashabowieoutposts.com/gallery

It's great - love to work with it.

But I've never been able to get those with just User permissions to be able to upload... Only an administrator is successful in uploading.  This was no problem in the past, but now this client would like to give their guests a means to share their pictures on their site - so now I have to figure out the bug...

... this is the error I keep getting...

Your upload did not succeed, most likely because your browser does not support Upload via this mechanism.

Your browser must support a standard called RFC 1867. Please check with your browser vendor for support of this standard.

------- anyone else experienced this?

Many thanks all!!

Doug

and the permissions, how exactly were they set ?
I find a lot of customers think they are setting permissions correctly when they really are not. That's why I wrote that long article on the subject.

As you probably know a data connection is a very low level thing. It is the foundation of any ASP application that communicates with a database. Unfortunatly it sometimes takes a while to get the hang of setting them up without issue.

Everything must be perfect.. the ODBC drivers must be up to date, folder permission are critical, sometimes you must use a new version of the access database.. etc etc etc  The errors and things that happen when all these things are not perfect and not helpful as you have found out.

I would suggest you download and get ASPTest from CJWSoft running before you go any further. It is designed to be as simple as possible and helps get a hang of the database setup process.

I'm getting errors when clicking the Update Config Button in the System Info page and when clicking the log files button.

I'm not sure if it's a permission thing or not.  ASPNET and IUSR both have modify access to the _database folder and childs, yet I'm still getting the error:

Access to the path "D:\Inetpub\wwwroot\aspprotectnet\_database\xsd\aspprotectne t_config.xml" is denied.

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.UnauthorizedAccessException: Access to the path "D:\Inetpub\wwwroot\_database\xsd\aspprotectnet_config.xml" is denied.

ASP.NET is not authorized to access the requested resource. Consider granting access rights to the resource to the ASP.NET request identity. ASP.NET has a base process identity (typically {MACHINE}\ASPNET on IIS 5 or Network Service on IIS 6) that is used if the application is not impersonating. If the application is impersonating via <identity impersonate="true"/>, the identity will be the anonymous user (typically IUSR_MACHINENAME) or the authenticated request user.

To grant ASP.NET write access to a file, right-click the file in Explorer, choose "Properties" and select the Security tab. Click "Add" to add the appropriate user or group. Highlight the ASP.NET account, and check the boxes for the desired access.

Any ideas?

Thanks

A very common and extremely bothersome error encountered when running ASP apps that connect to a database is the "80004005" error. It comes in many varieties.

These articles cover it.


(an article I wrote)
http://www.powerasp.com/content/hintstips/permissions.asp

(more articles)
http://www.aspfaq.com/show.asp?id=2009

http://support.microsoft.com/default.aspx?scid=kb;en-us;3065 18

http://www.aspfaqs.com/aspfaqs/ShowFAQ.asp?FAQID=115

http://www.macromedia.com/support/ultradev/ts/documents/8004 005_cannot_open_unknown.htm

I am having severe trouble with the SQL database connection for ASPlisting (generic version).

I have used all of the suggested connection strings but still get error messages such as:

[DBNETLIB][ConnectionOpen (Connect()).]Specified SQL server not found.

I have set up the tables in the database, although the database existed already with many other tables in it as it costs me per database per month so one has to suffice with many tables in it.

I use SQL a fair amount on my site but have not suffered any probs like this yet.

Any advise or help would be useful.

I run F-secure on my laptop which has the anti-virus and firewall modules, and the servers aren't running anything like that.

its one or the other... you cant protect upload.asp at the same time if upload.asp is included in another page..

I mean sure you can protect upload.asp from running when another page calls it by password protecting the page calling it.

And sure you can protect upload.asp by itself if it also runs all by itself. But you can not include the "check_user_inc.asp" more than once in any order of execution scenario. That includes pages being included.

Generally anytime a page is included in another that included page is not meant to run by itself and wouldn't produce any outcome if run by itself so this would never be an issue.

if you don't want "upload.asp" to ever be run by itself in that scenario put it somewhere in your web site that is not web browser accessible.

I would also suggest you look into using Virtual includes. It will save you a lot of time figuring out this sort of thing "../../../../../" becuase once you figure out the virtual include path you can use the same server side include from any directory level.

http://www.powerasp.com/content/code-snippets/includes.asp

Hi Chris

I've just recently purchased ASPBanner and have been testing out serving multiple Tradedoubler code using the IFRAME method. I have four types of banner on the same page refreshing every 15 seconds. (this will change on the live site) 

I've been leaving the IE page up for x hours and coming back to find between 1-3 of the banners has stopped and in place is an "internal error".

BannerZone=3&Refresh=15|40|800a0046|Permission_denied 80

I thought it may have been the SQL permissions from one of your other messages so I gave the banner user the DataReader and DataWriter permissions.

Its still happening and around the same time in the logs theres a couple of file not found errors.

BannerZone=2&Refresh=15|23|800a0035|File_not_found 80 - 80.65.240.159

BannerZone=4&Refresh=15|25|800a0035|File_not_found 80 - 80.65.240.159

BannerZone=1&Refresh=15|25|800a0035|File_not_found 80 - 80.65.240.159

Any ideas? I'm hoping its not the server as there is currently only 2 sites on it and this is pretty much the only traffic.

Thanks

Colin

IT worked just as cwilliams said. I did see the IP address being stored in the table but it didn't dawn on me that it was tied in to the view count, I tried it from a different IP address and it worked great .

Good coding Christopher

Thanks

John

Our login works great, variables even help determine menu options.  When user logs on, however, it opens in a new page.  Is there a setting somewhere that sets whether you can open in a new or existing page?

Also, when you log off

Chris: You are right about a little extra coding to make it work. I am still learning .ASP coding, so I did a little web searching and used IF THEN statments to confirm a member logged in with a valid Access Code. If valid, the protected page executes, with the Member's Name and Access Level on a single line at the top of that page. Looks sharp! If not logged in, or a non member (who found the page via Google), I used a Redirect to send s/he to a login page with optional links as you suggested (http://www.vspa.com/aspprotect/vspa-password-failed.asp) . I couldn't get it to work when using Group Access, but I am sure that is just because I am a novice at .ASP (I will post that example when I figure it out). Meanwhile, here's the code I used that works:

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="dataconn_inc.asp"-->
<!--#INCLUDE FILE="check_user_inc.asp"-->
<!--#INCLUDE FILE="config_inc.asp"-->
<% =Session("First_Name") %>&nbsp;<% =Session("Last_Name") %>:
<%
If Session("Access_Level") = "6"  Then
    Response.Write "VSPA Active Member Access Level 6"
 End If
If Session("Access_Level") = "7" Then
    Response.Write "VSPA Life Member Access Level 7"
 End If
If Session("Access_Level") = "8" Then
    Response.Write "VSPA Officer/Staff Access Level 8"
 End If
If Session("Access_Level") < "6" Then
    Response.Write "Access Level 1-6 NOT AUTHORIZED RESTRICTED AREA ACCESS"
    Response.Redirect("vspa-password-failed.asp")
End If
%><!-- http://www.vspa.com/aspprotect/vspa-password-enter.asp -->
<!-- *** End ASPProtect Code *** -->
<html>
<head>

Great Thank you!

As of thus far the program is working rather nicely.

I am very impressed :)

Three questions here:

1. I am having a problem with characters being displayed properly when viewing listings. Some alphabet characters and punctuation characters do not display properly when viewing the pages.

Sample here:

http://www.hibari2.com/lanoitanretni/kokusai_profiles/view_i tem.asp?Ad_ID=102&CatLevel=2&Cat1_ID=3&Cat2_ID=& amp; amp; amp; amp;Cat3_ID=&Cat4_ID=&FromSearch=True&SearchPage =%2Flanoitanretni%2Fkokusai%5Fprofiles%2Fdefault%2Easp%3FCat Level%3D2%26Cat1%5FID%3D3

In the access database I was looking at the properties for the ‘Ad_Custom’ fields. Unicode Compression is 'Yes' but IME Mode is set to 'No Control'. I wonder by changing this to ‘Hiragana’ if will solve the issue.

Note: the essays are typed in English on computer with Japanese OS, and then pasted up. Even though they are typed in English, there are several setting that may affect the output.

2. I want to reverse sort order for listings instead of listing 4, 5, 6, 7, I’d like to sort 7, 6, 5, 4… Could you tell me which page has to be edited, and in simplest terms what has to be changed?

3. Also, I’d like to increase the default display of ‘items per page’ from 25 to 100. Could you tell me which page has to be edited, and in simplest terms what has to be changed?

Thanks

This server is sitting in my den on a DSL circuit, so I don't have a hosting company. The install for Windows 2000 server is with default settings for all components installed.

I am not sure what you are referring to when you say:

"Does emailing work under the simplest scenario ? (directly from the users screen"

What user screen?

What settings are you referring to that I may have chosen?

Whenever you are running software that can block scripts from certain things you are going to have issues like this.

I imagine many complex asp scripts you will download will do things like this as well.

A highly doubt it is anything to worry about regarding people that use your site.

ASP code delivers standard html to the browser... nothing weird goes on as far as that goes.

This system has been sold for 6 years and this is just not something to worry about. Trust me.. though you may want to tone down black ice so it doesn't give you issues as it tries to block various things.

If I were you I would do some google searches on black ice and issues with it blocking asp scripts.. etc etc

Now, if you are running black ice right on the server that a whole other story and something you as a server admin need to decide what to do about. I doubt that is the case as black ice is not probably suitable for a commercial webserver but I just thought I would throw that out there.

Well, I assumed I'd be able to tweak this thing but it is all so intertwined it doesn't pay to mess with any of the files. Hence, I'm going to have buy a different system only a week or two after buying the unlimited version here.

As I leave I want to give you some impressions here. While the system is low-cost, the 99 dollar version is missing a few pieces that I think would bring the value to 99. It is one thing to talk about the speed/performance, but to a degree that's hard to measure, and to anyone with web advertising on their site, performance will always run second to potential site income.

It definitely needs a user interface and registration for advertisers, and it definitely needs a single variables file for changing the hundreds of variables for which there is no control. I had to search on my own just to change the look and feel.

Lack of multi-zone support is a serious drawback. I would submit that anyone with a serious website needs it, and will gladly pay you 139 over 99 for just that one feature.

Take them or leave them, they are just suggestions.