Hello,

I have ASPprotect 7 installed on my remote server.  I am able to go to the examples/default.asp page and login in without any difficulties.  If I copy the code from that page and paste it in a new page called the same thing but in a different folder, I get this error;  (Keep in mind that this is essentially the same exact page in a different location of the website)

Error Type:
Active Server Pages, ASP 0126 (0x80004005)
The include file '../../check_user_inc.asp' was not found.
/aspprotect/Pages/default.asp, line 3

I get the same error if I paste the "protection code" I have generated into the top of a current (.asp) page in my site.

Basically, the only pages that work are the ones that came with the program as examples.  Thats great, but now I need to make it work for my pages.  Any thoughts?

whether you use SSL or not really does not effect aspprotect in any way

I say, the smart thing to do there is too not start them off at a http:// url

one way to do it is put a simple ASP redirect on that default page and send them to an SSL version of the page instead...

http://www.powerasp.com/content/code-snippets/redirects.asp

another way would be not start them off on a protected page right off the bat and offer links to the the protected area...

in my opinion thats pretty odd to be starting them off on a protected page anyway
SLL maybe, but protected right from the time they hit the default page of the site.. thats just odd.. usually you want o say a little something about the site your at and then link people to protected areas or give them a login form which posts to a protected area.


Regardless if you always want users at your site under https:// you should have code on every single page in your site checking the url info at every page load. Then if someone ever hits a page and is not using the https://  you can do something about it like redirect them to the SSL home poge or redirect to that same page but with the https:// in the url..

I have narrowed it down.  The ../ for includes will not work with .asp files but will work in .shtml files.

any ideas?

You really can not do something like that. You can not use client side code to change a server side session variable.

To make changes server side a form must be submitted or a link clicked on to another page. Then you can do whatever you like but you cant have an onlci event update a session variable like that.

Though I am not sure of exactly what you are trying to do I think you'll need to go about things a little differently.

Anyone have any experience configuring PhotoGallery to use a backend mySQL database?

The application connects successfully for Read operations, but no amount of troubleshooting can get it to Write records to the tables.

http://www.marc-lisa.com/photos/default.asp

In a way your questions are confusing to me, but here is some information regardless.



Using Active Sever pages you can not protect entire folders. It is simply not possible. ASPProtect is Active Server Pages scripts so it can only protect individual ".asp" files.


If you are concerned about customers downloading the access database..

best practive is to store it in different folder name than it came in
best practive is to give the database .mdb file itself a different name
best practive is to change the password on the access database
best practice is to store it in a directory that is not part of your web if possible.. many of the better hosting companies have it set up so you actually can do that

the more of these things you can do the better..

And if you are really worried about security you should use a SQL Server database which nobody can download from your website under any conditions because your data lives in the sql server and unless they get the username/password to it they can not access it.

Can you incorporate a secure log in within the scripting.  I would like the account information to be secure without having to have the whole site using running through a secure (https://) path.  If this is possible, the scripting is perfect!

5300 users honetly wouldn't even phase the database or the code... even with MSAccess...you got other problems and I can say that with 150% certainty

my guess is permissions on the database folder are not quite right or the odbc drivers have issues.. something along those lines..

access databases act up when full modify permissions are not given to the folder they are in.... they can also act up if the odbc drivers are very new and you are not using a newer version of the access database such as 2002 version as opposed to a 97 or 2000 version

using a system dsn as opposed to a dsn-less connection can also cause BIG issues. always use a DSN-LESS connection

you can also have big problems if just the database file is given permissions instead of the whole directory it is in

also, the script timeout has nothing to do with it.. if that is happening something is wrong with the data connection like I said... no amount of changing timeouts is going to cure it...

how permissions are correctly set
http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

why system dsn's with access databases are bad news
http://support.cjwsoft.com/code/moreinfo9-1.htm

I know it worked at 1st but it can still be related to all of this because when permissions are not perfect databases will work ok for a while and then act up. it all has to do with the temporay lock files that access creates and deletes on a regualr basis

I encountered a problem that I haven't been able to solve. I'm trying to get .pdf files to byte serve (page-by-page load in the browser) but unable to do so. I've narrowed it down to stream download file where it creates the header object. I haven't made any success with the changes I've tried. Any help would be very nice.

This maybe useful:
http://msdn.microsoft.com/library/default.asp?url=/library/e n-us/act/htm/actml_ref_href.asp

Tell tell me some info about your install?

How am I supposed to know what is going on when you are not showing me what you have in your web config file and also the directory structure of the install or what you are putting in a page you are trying to protect ? It almost sounds like you are not editing the paths correctly in the various places.  I mean yes you told me something about the "map" folder but what I saying is tell me more detail.

BTW: this is a very important setting in the web.config file and must be edited accordingly so the path is right.

<forms name=".aspprotect~net" loginUrl="/aspprotectlogin.aspx" protection="All" timeout="60" path="/" />

Basically your showing me random errors and posts left and right and I honestly have no idea what your doing ?

Ulitmately though I am trying to help you in this situation like the web site says.

We offer tech support for installation of the base application purchased in it's native form. In some cases in order to receive proper tech support your application will be need to be installed on a live server on the Internet. We simply cannot troubleshoot all issues when the application is only installed on your local machine.

Meaning I am not going to keep this up if you keep asking question after question after question regardign your local XP Pro installation. There is only so much I can assume or guess when you are running this on a local development server. I know you got all sorts of problems getting a decent live server to run this on but that just isn't my problem. Get this up and running on a professionaly and correctly setup live server and when these random configuration errors pop up atl least I can go run the pages and look at them. Right now I am just confused by nearly everything you have posted today. Half of looks like basic ASP.NET path issues that you need to sort of on your own based on where you installed the application on the machine and what you have in the web.config file.. etc etc etc

It is sounding more and more like ASP.NET is way over your head. If you want a copy of the classic ASP version of ASPProtect you are welcome to it. I think you will be a lotter better off sticking to classic ASP unless you really start reading up on ASP.NET and learning more about how forms based authentication and the web.config file work.

Regarding (ASP Photo Gallery Pro)

If you are looking to import a very, very, large number of images, the upload feature might not be sufficient for you. I have done some work using a unix terminal to be able to upload as many images as I would like by simply placing the images in the directory and renaming the images. There are other ways to rename the images, but I am very familiar with Linux, so I chose to do it this way. If you are running Linux, MacOS, or another Linux-based OS, you can simply pull up a terminal and run the following command in the appropriate directory. If you run Windows, I'd suggest CygWin, which creates a Linuxenvironment (Linux shell). It can be found at www.cygwin.com In order to be recognized by the ASP software, the images must be in the format of pic_"Album Number"_"Picture Number".jpg . Therefore, the following code is run to accomplish the file name change (on one line without wordwrap):

ls -1 DSC* |
sed 's/DSCN//g'
sed 's/.JPG//g' |
awk '{print "mv DSCN"$1".JPG pic_9_"$1".jpg"}'
This command will change all files beginning in "DSCN" to "pic_9_*Picture Number*".

This does have a slight problem however. If there is a large number of pictures, 0's become a problem. For example, if there are 200 pictures, picture 1 will show up as pic_9_001.jpg. This can be fixed by the following command, which will eliminate unneccesary 0's (All on one line once more):

ls -1 --color='never' pic_9_0*
|sed 's/_0/_/g'
|sed 's/pic_9_//g'
|sed 's/.jpg//g'
|awk '{print "mv pic_9_0"$1".JPG pic_9_"$1".JPG"}'

This command eliminates 1 zero. It should be run as many times as needed to eliminate all zero's.

Please Note: These commands will only show the resultant set (The list of picture names). In order to execute them, they must be output to a shell script using the ">" character as follows:

ls -1 DSC* |
sed 's/DSCN//g'
sed 's/.JPG//g' |
awk '{print "mv DSCN"$1".JPG pic_9_"$1".jpg"}' > temp.sh

Then, the shell script must be run using the following command:

sh temp.sh

This might take a few moments, depending on the amount of picture names that are being changed.

IMPORTANT: BACK UP all files before changing file names. Also, view the resultant sets to make sure it's what you want before outputting to a shell script.

If you have any questions, please feel free to post or e-mail me @ JPortnoy@checkernet.com

Triple check the upgrade instructions because I think you missed something important.

line 227 on "/password_admin/save.asp" refers to the "Password" field

the error your getting most likely means it is not there..

Pay close attention to the areas in the upgrade instructions regarding renaming your existing "Password" field to "Old_Password"

Then making a new "Password" field and carefully following the instructions needed to convert your old passwords for use with the new system.

If you don't everything carefully and perfectly this is the sort of error you will get.

No worries

then..

is there any way I can get rid of those information shown on User activity screen, so I can at least know who logged in current day?

thank you in advance

it has been 3 days since I logged myself in under Admin, and all the user information on the User Activiy screen seemed to be gone.

is there any specific length of period it refreshes its user information??

If you re-start the web via IIS, reboot the server, or (possibly) just add and remove a category... that will clear up.

ASPClassifieds and ASPListings must be installed in seperate IIS applications if they are the same web. Otherwise the category caching system of each system will interfere with each other. They were never intended to be installed in the same web together since ASPListings is merely a stripped down version of ASPClassifieds and they share a lot of the same code. Like I said though if different IIS applications are set up in the web site you can do it because each IIS application will have it's own set of application and session variables.

Hi,

I basically explained how I thought that might work here where I went over everything I could think of and suggested you download the free version and see if you could get it working
http://support.cjwsoft.com/code/moreinfo488-1.htm

The part about using the alternate scenario involving querystring info from a url.

I have never done anything like that and that is why I told you what I knew and suggested you try it with the free version...

its part of how the skins load.. regardless you got bigger problems here..

I am beginning to wonder if you unzipped the download correctly because I see things in folders they should not be in...

you should have ended up with a bunch of folders and files...

It you just ended up with a ton of files in one directory you did not unzip the zip file correctly... if so check your zip program settings.. I mean that error is because it is looking for a file in the skins folder that isn't there and it should be there

better yet, unzip the downloaded zip file using windows xp built in unzipping features which will do it correctly...

You are right, there are NO entries in the "PayPal_Subscriber_ID" field at all. Any way of fixing this?

If things are not perfect there will be no log files and no errors.. it can only be one of these things really
http://support.cjwsoft.com/code/moreinfo313-2.htm

You may also want to make your the filesystem on the server is working and not disabled by norton script blocking or anything random like that. Testing the filesystem object is best done by writing a simple text file to a folder. Plenty of examples of doing that can be found at www.aspin.com

Recent activity is temporary and admin activity in the admin area is not tracked. If your application in IIS has reset or there has been no activity in the users area or in pages you protected there will be nothing there. The busier your site the more chance something will be there. For example usually our online demo has something there except right after 4am when my server does an iisreset.

But can you guess as to why the following might be happening:

1) The password is still "temp", and we verified that by checking dataconn_inc.asp ; 2) People are able to place new ads, etc. ; 3) We then download the DB.  Sometimes we are able to open up the DB just downloaded with the password "temp", but only see the USERS table.  At other times, we cannot open the same DB with any password, and get a "password not valid" message even when using the password "temp".

So what can the problem be?

Two things you can do to test..

make sure there is at least one ".log" file in that directory.. then if you go to the log file screen and it does not show up in the list the physical path you are using is just not correct

remember the physcial path must contain a drive letter (sometimes a network path starting with // is ok if they have it setup as a network drive)

the other thing you can do is use this script to try and write a simple text file in the directory

http://www.devasp.com/samples/writetofile.asp

That will show you if permissions are correct

If you want to have a login form on a non protected page that posts
to a protected ".asp" page use code like this.

Change the action of the form to the page you want them to log into.
Make sure to page you send them to is protected by the "check_user_inc.asp" file.

<center>
  <table border="0" width="400" height="200" bgcolor="#000000">
    <tr>
      <td bgcolor="#F4F4F4">
        <form method="POST" action="memberarea.asp">
          <input type="hidden" name="Status" value="Checkem">
          <p align="center"><font face="Arial">ASPProtect Login</font></p>
          <div align="center">
             <center>
             <table border="0" bgcolor="#C0C0C0">
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Username</font></small></stro ng></td>
                 <td><input type="text" name="Username" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Password</font></small></stro ng></td>
                 <td><input type="Password" name="Password" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB" colspan="2"><font face="Verdana, Arial, Helvetica" size="-1"><input type="checkbox" name="KEEPMESIGNEDIN" value="True">Keep
                   me signed in on this computer unless I log off.</font></td>
               </tr>
             </table>
             </center>
          </div>
          <div align="center">
             <center>
             <p>&nbsp;<input type="submit" value="Login"></p>
             </center>
          </div>
       
        </form>
      </td>
    </tr>
  </table>
  </center>

Hello,

You are correct regarding what you noticed.. ASPBanner only allows one person to administrate. If if did what you are asking about it would probably cost more.
(you get the ASP source so if you really wanted that you could always add it on your own fairly easily, but it all depends on your skills)

AS for keyword advertising and different ads based on certain pages ASPBanner does not get into that. The main reason being performance as I built ASPBanner primarily as a performance banner rotation solution.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=144& ; ; ; ; ;PN=1

Like that thread says, you could make different zones for different conditions.. then surround the banner calling code with if else logic so a different banner zone was called under certain conditions.

Regardless, if you really need something that has every bell and whistle. BanManPro is where it is at.

I am not sure totally understand your question.
I need you to explain it differently.

Any ".asp" page that is protected is going to automatically prompt them for a login box or log them in automatically depending on if they set that option.. In the end returning them to that same page.

So, it really all takes care of itself for the most part.. It doesn't even matter if the bookmark a protected page deep in your site. The system is smart enough to keep them at that page as well as handle their access.

Now of course if they are at an unprotected page of your site and navigate to a protected page they get a loin prompt or are allowed in if they already logged in...

Also.. when you say unprotected page ? do you mean ".htm" or ".asp"

Gotcha.

Can you set an expiration date on a subscription?

Thanks,

Jess

ok, then I need more information.

Was the code changed ? Thats the big one. If it worked and now it doesn't something must have changed. Things just don't stop working on their own. I would try putting the original files back in there for everything but the config and dataconn files just to make sure and see and if it works with the original files. (back up your old ones 1st so you can copy them back of course)

Also, perhaps PM me the site info so I can go look as well.

that's they way it should be done..

the only other thing would have been to test everything with sql before trying to import any data.. and make sure all was fine at that stage




more info on the errors would be helpful.

Id' also carefully visually compare the SQL tables and fields with the SQL scripts and make sure all field types and settings got set correctly.

Also, make sure the user accessign the database has datareader and datawriter permissions of course.

I would say that it isn't all that difficult using mySQL for the backend....the main thing is to make sure you set the primary keys for auto-incrementing in your database.  Alos need to make sure that any DELETE SQL statements are formatted like this

DELETE FROM tblName WHERE tblField=SomeValue

and not

DELETE * FROM tblName WHERE tblField=SomeValue

The same holds true for using MSSQL

This article from my old powerasp.com site explains what Server.MapPath is and also why you can't use it to specify the data connection in any of the CJWSoft applications.

Use ASP to determine the Physical Path Of Your Virtual Website

As this article mentions you can still use it to determine the path, but you can't use it in our data connection strings because the data connection page is an include file and server.mappath will report back different paths for the different directories....... meaning it will work in one directory level but not another as the path will be different.

You should not have single quotes around the "-1" because Album_Active is not a string field in the database. It's true/false or bit field in the database depending on the database you are using (MSSQL or ACCESS)

I'd do it a little more like this I think.

SELECT COUNT(Album_ID) AS Alb_Count FROM " & tbl_label_albums & " WHERE User_ID = " & CmdListUsers("User_ID") & " AND Album_Active = 1"

I took out the parentheses as well since I dont believe they are needed in a simple case like this

but is hard to say unless your the one testing it... my version might have a mistake as I am a little rusty with my SQL at the moment

also: in case your wondering...
depending on the situation and the odbc drivers the 1 and -1 should work either way but sometimes it's picky and you have to do it one way or the other