Two things you can do to test..

make sure there is at least one ".log" file in that directory.. then if you go to the log file screen and it does not show up in the list the physical path you are using is just not correct

remember the physcial path must contain a drive letter (sometimes a network path starting with // is ok if they have it setup as a network drive)

the other thing you can do is use this script to try and write a simple text file in the directory

http://www.devasp.com/samples/writetofile.asp

That will show you if permissions are correct

I wonder what that ENDSQLMail send failure is all about ?
I dont use anything regarding SQLMAIL in the ASPProtect code.

I think I might need to go in so I can debug a bit. Everything seems to work fine with a SQL installation here so I just don't know at the moment.

If that is ok with you I would need ftp access or something so I can trry a few things and hopefully figure it out. Admin access to the aspprotect admin area as well so I can see what you have set up in there.

PM me with that info if you want me to take a look.

Thanks, I'll take a look.

Nick

[QUOTE=cwilliams]Humm, Did you make any changes to the code ?
Solid Black is not the default so it must have changed at least once.[/quote]

I did change the top_logo.gif and the associated link. That was on the default page not the Solid Black skin which is unchanged. After downloading/uploading the skins I tried changing it to one of the Beach skins and that's when it changed to Solid Black and has been stuck there ever since.

[quote]Otherwise it might be some sort of application variable problem.
I would make sure the web is and "application" in the IIS console.[/quote]I don't have access to the Microsoft IIS console as this is a host site. I can access the site's "control panel" but it does allow for those type of settings. Mostly just permissions, DSN entries, etc.

Thanks.
Al

Could be a mod I guess - it would be nice to have an option on the admin settings page to lock down access of all pages and redirect to a specified  "lockdown" page upon attempted login.

If I'm updating the large files on the server and someone attempts a download, they'll get a partial ZIP file or an error.

ya, that firewall could mess that up.

just edit which ever style include you are using
(with a text editor)

it will be one of these depending on your settings.. and they are located in the "scripts" directory

view_album_style1_inc.asp
view_album_style2_inc.asp
view_album_style3_inc.asp

find this section of code and remove the part in red


If Last_Counter_IP <> Request.ServerVariables("REMOTE_ADDR") Then
 
 Set CmdUpdateCounter = Server.CreateObject("ADODB.Recordset")
 cmdTemp.CommandText = "SELECT " & tbl_label_albums & ".* FROM " & tbl_label_albums & " WHERE (Album_ID = " & Album_ID & ")"
 cmdTemp.CommandType = 1
 Set cmdTemp.ActiveConnection = ConnGallery
 CmdUpdateCounter.Open cmdTemp, , 1, 3
 
 CmdUpdateCounter.Fields("Album_Counter") = (Album_Counter + 1)
 CmdUpdateCounter.Fields("Last_Counter_IP") = Request.ServerVariables("REMOTE_ADDR")
 
 CmdUpdateCounter.Update
 CmdUpdateCounter.Close
 
 Album_Counter = Album_Counter + 1
 
End If

Can we get access to the source project files for ASPProtect.net since we'd like to put in some of our own branding on the pages and not everything can be done in HTML.

Thanks

maybe this is the issue...

do you realize that the descriptive name you give a group is not always going to be the same ID in the database ? The two are not related.

Perhaps what you named Group 1 is really group ID 3

You can tell for sure by generating protection code for group 1 and see what ID it tells you to use..



You also need to remember that you are testing this with different users and it is really easy to get confused so you need specifically log off using the log off page to ensure session info from the previous login doesn't show up and cause confusion when you log in with a different user... etc etc

in addition to logging off that way you may also want clear the session and application info via the code at the bottom of my article
http://www.powerasp.com/content/new/displaying-session-and-a pplication-variables.asp

and do that in between any user you log in as

Just to put an end to this thread here is the solution for anyone reading.

The permissions were ok.

The data connection string never got edited in the "dataconn_inc.asp" file so it was invalid the whole time.

Once that was corrected the application ran.

So really this whole thread was over not following the directions and not editing the data connection string... 

ok, then I need more information.

Was the code changed ? Thats the big one. If it worked and now it doesn't something must have changed. Things just don't stop working on their own. I would try putting the original files back in there for everything but the config and dataconn files just to make sure and see and if it works with the original files. (back up your old ones 1st so you can copy them back of course)

Also, perhaps PM me the site info so I can go look as well.

no, you cannot unless you plan to write a lot of custom code.

That is why the option pack has groups which eliminate the need to use access levels because groups can do everything access levels can and more.

There is an article here regarding that.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=32& PN=1

look in the "check_user_inc.asp" file

Thank you that did it !!

I have just purchased ASP v7 and loaded.  Followed instructions.  Obtained codes not prob.  Get to single field login screen, enter password and following page appears:

Method Not Allowed

The requested method POST is not allowed for the URL /temp/aspprotect/password_admin/get_me_in.asp.

Added folder aspprotect under (temp web) folder - temp, but also tried under root folder of web site.

Still no luck.

The version of aspbanner you have should not matter.

What you are doing here is wrong.

<PARAM NAME=movie VALUE=" http://www.innovationtools.com/aspbanner/aspbanner/banner_re direct.asp?Banner_ID=25">

PARAM NAME=movie is supposed to link to your ".swf" file.
And thats why all you see is black.

I don't think you quite understood all of that information fully.

Your ".swf" files needs to be coded in FLASH to link to the aspbanner redirect url. You don't change that flash calling code like that.

The ".swf" file links to the aspbanner redirect url which tracks the click and then redirects the user to the Link URL

You basically need to code your ".swf" flash file to go to that aspbanner URL or code your flash file so it can take a parameter for the url it clicks to (like the macromedia article talks about. This has to be done when editing the flash file in the flash editor before the file is saved.

If you dont have access to the original ".swf" to edit it and re-save it.. your out of luck as far as tracking clicks goes

Hello Chris:

Let me run some more test if it's working on your end it should be on mine?  I have made some custom updates to the code but no in that area.

Thanks,
-Ricardo

But can you guess as to why the following might be happening:

1) The password is still "temp", and we verified that by checking dataconn_inc.asp ; 2) People are able to place new ads, etc. ; 3) We then download the DB.  Sometimes we are able to open up the DB just downloaded with the password "temp", but only see the USERS table.  At other times, we cannot open the same DB with any password, and get a "password not valid" message even when using the password "temp".

So what can the problem be?

ITS WORKING

...I have earned a beer (dont tell anyone im underage)

Has any one used the aspmail function to send emails from within your site? If so what did you use as the AspMail_Host string in the connections database?

thank you

Can I have the logon be in a top frame while having the protected pages displayed in a main frame?

Using frames with forms based authentication is not the best thing to be doing. Your much better off not using frames and using includes files to do a virtual frames sort of thing (search google) but if you are going to use frames I would suggest password protecting the frameset page as well as any pages it contains.

If you want to have a login form in a non protected top frame all the time.. that posts to a lower frame that is password protected.. you would do this
http://support.cjwsoft.com/code/moreinfo169-1.htm
but change the target of the form to one of your frames

personally though I think that would be a somewhat goofy setup to have going on


Also, how will it behave if a user moves in between a protected page to a public page and back to the protected page again?

As long as they have cookies enabled which is required for session variables to work... then you will have no issues because once they come back to a page they have permission to they will just be allowed in without login.. at least while that session is still active.. or for a longer time if they choose the remeber me option which keeps track of them with a cookie .

Really, the best thing to do is expirment and see how things behave.

After taking another look at this and trying your suggestions without success, it appears that in Windows 2003 server it is nearly impossible to remove the READ ONLY attribute from the _database folder.  I'm wonder if this could the cause?

Thanks 

Turn off "Show Friendly HTTP error messages"
If you are getting errors with your ASP application go to Internet Explorer and make sure this setting is unchecked. Having this checked can cause a generic error to be displayed in you web browser when ASP code encounters an error. This generic error message doesn't really help you fix the problem. Having this setting unchecked will usually result in a more detailed error message and the line number the error is occurring at, thus giving you a good clue as to where the problem is within the ASP code. If detailed ASP error messages have been disabled at the server level this setting will make no difference.

Hello,

It is very possible (just basic ASP and database accessing techniques)
It is just not the sort of thing I support in the forums as it is a customization related.

Even for me something like that would take 1-3 hours of coding time. Basically, it is just not something I could just explain to you real quick.

You might want to pick up a good book on ASP or check out some of the great resources out there. http://support.cjwsoft.com/forum/forum_topics.asp?FID=17

Doing stuff like this is relatively easy, but can be time consuming work.


In the future please use a more descriptive topic for yours posts "I need help" is not exactly helpful to anyone else searching through the forums . I therefore renamed your post accordingly.

I really try to keep the forums organized and clean. That's all.

Thanks

If you are using an ACCESS Database try to avoid using a system DSN. They are much slower because they go through ODBC which then uses the Jet Drivers to access the database. They also have to do a registry lookup.

ttp://www.4guysfromrolla.com/webtech/070399-1.shtml

http://www.powerasp.com/content/database/dsn_vs_dnsless.asp



It's funny because in the 4guys article they ask the question..

"Hmmmm... so who was right, Microsoft or Wrox?"

I'll tell you who was right and who said it 1st.  It was me and I said it on my old powerasp.com site before anyone else ever did.

I found it out on my own by experimenting when I was the Systems Analyst for an large ISP. We we had web servers that were not running well. I didn't read about this solution anywhere because no one was talking about it at the time. Microsoft said use System DSN's so everyone just took their word for it.

I took a lot of heat for saying that back in the day but over time everyone started saying it.

no, there is not not.

If you wanted to to that you would have to add some code to check their album count in the database and not allow them to make a new album if they were at the limit.

It really means just what it says. Your connection string is just not valid and the sql server speicifed can not be reached. The username and password could also be invalid. Since you already had a database set up you should use the same username and password you have always been using. You also need to use the same database name you have always been using. Without actually knowing more and seeing what you are doing it is pretty hard to tell you anymore than that.

The directions and sql scripts given are for setting up a new sql database. Applying them to an existing sql database requires a slightly different approach. Modificiations to the SQL scripts elimintating references to the usernames/password/database we suggest in the scripts is also a good idea.

A data connection is a low level as it gets. Until you get that working you are really not even touching any of the code in the ASPListings application.

If you want I have no problem going into your sql server and web and setting up for you correctly.